RESUMEN
Recent years have witnessed relevant advancements in the quality of life of persons with lower limb amputations thanks to the technological developments in prosthetics. However, prostheses that provide information about the foot-ground interaction, and in particular about terrain irregularities, are still missing on the market. The lack of tactile feedback from the foot sole might lead subjects to step on uneven terrains, causing an increase in the risk of falling. To address this issue, a biomimetic vibrotactile feedback system that conveys information about gait and terrain features sensed by a dedicated insole has been assessed with intact subjects. After having shortly experienced both even and uneven terrains, the recruited subjects discriminated them with an accuracy of 87.5%, solely relying on the replay of the vibrotactile feedback. With the objective of exploring the human decoding mechanism of the feedback startegy, a KNN classifier was trained to recognize the uneven terrains. The outcome suggested that the subjects achieved such performance with a temporal dynamics of 45 ms. This work is a leap forward to assist lower-limb amputees to appreciate the floor conditions while walking, adapt their gait and promote a more confident use of their artificial limb.
Asunto(s)
Amputados , Miembros Artificiales , Humanos , Retroalimentación , Tecnología Háptica , Calidad de Vida , Extremidad Inferior , Pie , Caminata , Marcha , Fenómenos BiomecánicosRESUMEN
Peripheral intravenous catheters are administered for various purposes, such as blood sampling or the infusion of contrast agents and drugs. Extravasation happens when the catheter is unintentionally directed outside of the vein due to movement of the intravascular catheter, enhanced vascular permeability, or occlusion of the upstream vein. In this article, extravasation and its mechanism are discussed. Subsequently, the sensorized devices (e.g., single sensor and multimodal detection) to identify the extravasation phenomena are highlighted. In this review article, we have shed light on both physiological and engineering points of view of extravasation and its detection approaches. This review provides an overview on the most recent and relevant technologies that can help in the early detection of extravasation.
Asunto(s)
Cateterismo Periférico , Medios de Contraste , IngenieríaRESUMEN
Unwanted icing has major safety and economic repercussions on human activities, affecting means of transportation, infrastructures, and consumer goods. Compared to the common deicing methods in use today, intrinsically icephobic surfaces can decrease ice accumulation and formation without any active intervention from humans or machines. However, such systems often require complex fabrication methods and can be costly, which limits their applicability. In this study, we report the preparation and characterization of several slippery lubricant-infused porous surfaces (SLIPSs) realized by impregnating with silicone oil a candle soot layer deposited on double-sided adhesive tape. Despite the use of common household items, these SLIPSs showed anti-icing performance comparable to other systems described in the literature (ice adhesion < 20 kPa) and a good resistance to mechanical and environmental damages in laboratory conditions. The use of a flexible and functional substrate as tape allowed these devices to be stretchable without suffering significant degradation and highlights how these systems can be easily prepared and applied anywhere needed. In addition, the possibility of deforming the substrate can "allow" the application of SLIPS technology in mechanical ice removal methodologies, drastically incrementing their performance.
RESUMEN
Gait asymmetry in lower-limb amputees can lead to several secondary conditions that can decrease general health and quality of life. Including augmented sensory feedback in rehabilitation programs can effectively mitigate spatiotemporal gait irregularities. Such benefits can be obtained with non-invasive haptic systems representing an advantageous choice for usability in overground training and every-day life. In this study, we tested a wearable tactile feedback device delivering short-lasting (100ms) vibrations around the waist syncronized to gait events, to improve the temporal gait symmetry of lower-limb amputees. Three above-knee amputees participated in the study. The device provided bilateral stimulations during a training program that involved ground-level gait training. After three training sessions, participants showed higher temporal symmetry when walking with the haptic feedback in comparison to their natural walking (resulting symmetry index increases of +2.8% for Subject IDA, +12.7% for Subject IDB and +2.9% for Subject IDC). One subject retained improved symmetry (Subject IDB,+14.9%) even when walking without the device. Gait analyses revealed that higher temporal symmetry may lead to concurrent compensation strategies in the trunk and pelvis. Overall, the results of this pilot study confirm the potential utility of sensory feedback devices to positively influence gait parameters when used in supervised settings. Future studies shall clarify more precisely the training modalities and the targets of rehabilitation programs with such devices.
Asunto(s)
Amputados , Fenómenos Biomecánicos , Retroalimentación , Marcha , Humanos , Proyectos Piloto , Calidad de Vida , CaminataRESUMEN
Hydrothermal growth of ZnO nanorods has been widely used for the development of tactile sensors, with the aid of ZnO seed layers, favoring the growth of dense and vertically aligned nanorods. However, seed layers represent an additional fabrication step in the sensor design. In this study, a seedless hydrothermal growth of ZnO nanorods was carried out on Au-coated Si and polyimide substrates. The effects of both the Au morphology and the growth temperature on the characteristics of the nanorods were investigated, finding that smaller Au grains produced tilted rods, while larger grains provided vertical rods. Highly dense and high-aspect-ratio nanorods with hexagonal prismatic shape were obtained at 75 °C and 85 °C, while pyramid-like rods were grown when the temperature was set to 95 °C. Finite-element simulations demonstrated that prismatic rods produce higher voltage responses than the pyramid-shaped ones. A tactile sensor, with an active area of 1 cm2, was fabricated on flexible polyimide substrate and embedding the nanorods forest in a polydimethylsiloxane matrix as a separation layer between the bottom and the top Au electrodes. The prototype showed clear responses upon applied loads of 2-4 N and vibrations over frequencies in the range of 20-800 Hz.
RESUMEN
The tactile perception of a surface texture is mediated by factors such as material, topography, and vibrations induced by the sliding contact. In this paper, sensory characterizations are developed together with topographical and tribo-tactile characterizations to relate perceived features with objective measurements of tribological and dynamic signals. Two sets of surface samples are used in this study: the first set is made of a commercial floor covering tiles that aim at counter-typing natural wood flooring, with both a visual and a tactile texture mimicking wood. A second set is custom-made by replicating the first set using a plain purple polyurethane resin. The comparison between tribo-tactile signals and sensory analysis allowed the identification of objective indices for textures with slight topographical differences. Even though the topography of the replicated samples is the same as their corresponding commercial products, the fact that the material is different, induces differences in the contact and vibrational parameters. This in turn modifies the discrimination performances during the sensory experiment. Tactile characteristics collected during sensory procedures are found to be in agreement with objective indices such as friction coefficients and induced vibrations.