Point-of-care testing: applications of 3D printing.

Point-of-care testing (POCT) devices fulfil a critical need in the modern healthcare ecosystem, enabling the decentralized delivery of imperative clinical strategies in both developed and developing worlds. To achieve diagnostic utility and clinical impact, POCT technologies are immensely dependent on effective translation from academic laboratories out to real-world deployment. However, the current research and development pipeline is highly bottlenecked owing to multiple restraints in material, cost, and complexity of conventionally available fabrication techniques. Recently, 3D printing technology has emerged as a revolutionary, industry-compatible method enabling cost-effective, facile, and rapid manufacturing of objects. This has allowed iterative design-build-test cycles of various things, from microfluidic chips to smartphone interfaces, that are geared towards point-of-care applications. In this review, we focus on highlighting recent works that exploit 3D printing in developing POCT devices, underscoring its utility in all analytical steps. Moreover, we also discuss key advantages of adopting 3D printing in the device development pipeline and identify promising opportunities in 3D printing technology that can benefit global health applications.

A microfluidic circulatory system integrated with capillary-assisted pressure sensors.

The human circulatory system comprises a complex network of blood vessels interconnecting biologically relevant organs and a heart driving blood recirculation throughout this system. Recreating this system in vitro would act as a bridge between organ-on-a-chip and "body-on-a-chip" and advance the development of in vitro models. Here, we present a microfluidic circulatory system integrated with an on-chip pressure sensor to closely mimic human systemic circulation in vitro. A cardiac-like on-chip pumping system is incorporated in the device. It consists of four pumping units and passive check valves, which mimic the four heart chambers and heart valves, respectively. Each pumping unit is independently controlled with adjustable pressure and pump rate, enabling users to control the mimicked blood pressure and heartbeat rate within the device. A check valve is located downstream of each pumping unit to prevent backward leakage. Pulsatile and unidirectional flow can be generated to recirculate within the device by programming the four pumping units. We also report an on-chip capillary-assisted pressure sensor to monitor the pressure inside the device. One end of the capillary was placed in the measurement region, while the other end was sealed. Time-dependent pressure changes were measured by recording the movement of the liquid-gas interface in the capillary and calculating the pressure using the ideal gas law. The sensor covered the physiologically relevant blood pressure range found in humans (0-142.5 mmHg) and could respond to 0.2 s actuation time. With the aid of the sensor, the pressure inside the device could be adjusted to the desired range. As a proof of concept, human normal left ventricular and arterial pressure profiles were mimicked inside this device. Human umbilical vein endothelial cells (HUVECs) were cultured on chip and cells can respond to mechanical forces generated by arterial-like flow patterns.

Facile formation of a microporous chitosan hydrogel based on self-crosslinking.

A facile approach for the formation of microporous (chitosan) hydrogel scaffolds based on self-crosslinking is presented. It is simple and does not require any sacrificial porogen, toxic initiator/catalyst, harmful irradiation, or sophisticated equipment. The pore size, porosity, and mechanical properties of our hydrogels can be readily tuned.

A simple fabricated thickness-based stiffness gradient for cell studies.

In this work, we developed a simple method to fabricate a thickness-based continuous stiffness gradient for biological studies. It was made by glass slides, polydimethylsiloxane (PDMS) pre-polymer, spacer and clips only, without any sophisticated equipment. It is easy to fabricate in any general biological and pharmaceutical laboratories. The stiffness gradient was characterized in terms of apparent Young's modulus by atomic force microscopy (AFM) and the Young's modulus along the gradient was found to be 8.5-120kPa, which is within the physiological relevant range. HeLa-C3 cells were cultured on the gradient to study their morphological behavior according to the substrate stiffness. Furthermore, the drug efficiency of etoposide, an anti-cancer drug, was studied along the substrate stiffness gradient. It was found that HeLa-C3 cells cultured on the soft region of the gradient (8.5-11kPa) are more sensitive to etoposide. We believe the proposed device could promote cell investigations and drug screenings on a substrate with comparable stiffness to the native tissue.

Highly emissive and biocompatible dopamine-derived oligomers as fluorescent probes for chemical detection and targeted bioimaging.

We prepared highly emissive and biocompatible dopamine-derived oligomers, and demonstrated their applications as novel fluorescent probes for sensitive detection of Fe(3+) ions and targeted bioimaging in live cells.