Pyrrolo[3,2-b]pyrrole-1,4-dione (IsoDPP) End Capped with Napthalimide or Phthalimide: Novel Small Molecular Acceptors for Organic Solar Cells.

We introduce two novel solution-processable electron acceptors based on an isomeric core of the much explored diketopyrrolopyrrole (DPP) moiety, namely pyrrolo[3,2-b]pyrrole-1,4-dione (IsoDPP). The newly designed and synthesized compounds, 6,6'-[(1,4-bis{4-decylphenyl}-2,5-dioxo-1,2,4,5-tetrahydropyrrolo[3,2-b]pyrrole-3,6-diyl)bis(thiophene-5,2-diyl)]bis[2-(2-butyloctyl)-1H-benzo[de]isoquinoline-1,3(2H)-dione] (NAI-IsoDPP-NAI) and 5,5'-[(1,4-bis{4-decylphenyl}-2,5-dioxo-1,2,4,5-tetrahydropyrrolo[3,2-b]pyrrole-3,6-diyl)bis(thiophene-5,2-diyl)]bis[2-(2-butyloctyl)isoindoline-1,3-dione] (PI-IsoDPP-PI) have been synthesized via Suzuki couplings using IsoDPP as a central building block and napthalimide or phthalimide as end-capping groups. The materials both exhibit good solubility in a wide range of organic solvents including chloroform (CF), dichloromethane (DCM), and tetrahydrofuran (THF), and have a high thermal stability. The new materials absorb in the wavelength range of 300-600 nm and both compounds have similar electron affinities, with the electron affinities that are compatible with their use as acceptors in donor-acceptor bulk heterojunction (BHJ) organic solar cells. BHJ devices comprising the NAI-IsoDPP-NAI acceptor with poly(3-n-hexylthiophene) (P3HT) as the donor were found to have a better performance than the PI-IsoDPP-PI containing cells, with the best device having a VOC of 0.92 V, a JSC of 1.7 mAcm-2, a FF of 63%, and a PCE of 0.97%.

High-efficiency pyrene-based blue light emitting diodes: aggregation suppression using a calixarene 3D-scaffold.

An efficient blue light emitting diode based on solution processable pyrene-1,3-alt-calix[4]arene is demonstrated, providing a record current efficiency of 10.5 cd A(-1) in a simple non-doped OLED configuration. Complete suppression of pyrene aggregation in the solid state is achieved by controlling chromophore dispersion using the 1,3-alt-calix[4]arene scaffold.

Structure and properties of nano-confined poly(3-hexylthiophene) in nano-array/polymer hybrid ordered-bulk heterojunction solar cells.

The ordered-bulk heterojunction (BHJ) photovoltaic device comprising a semiconducting donor polymer incorporated into pristine/unmodified vertically aligned arrays of metal oxide acceptor nanotubes/nanorods is widely perceived as being structurally ideal for energy conversion but the power conversion efficiencies of such devices remain relatively low (in the order of η = 0.6%) when compared with bilayer or non-ordered bulk heterojunction systems. We explain the incongruity by investigating the morphology and microstructure of regio-regular poly(3-hexyl thiophene) (P3HT) infiltrated and confined within the cavities of TiO(2) nanotube arrays. A series of TiO(2) nanotube arrays with different nanotube diameters and inter-nanotube spacings are fabricated by the liquid-phase atomic layer deposition (LALD) technique, and P3HT is infiltrated into the array cavities via a vacuum-annealing technique. X-Ray diffraction studies reveal that the P3HT chains in both nano-confined and non-confined (i.e. planar film) environments are well-aligned and oriented edge-on with respect to the underlying substrate. Up to 2.5-fold improvement in the incident-photon-to-converted-electron efficiency (IPCE) is observed in ordered-BHJ structures over benchmark planar devices which we attribute to the increase in interfacial area resulting from the use of the nanostructures. However, the large effective surface area conferred by the nano-arrays (up to 9.5 times that of the planar system) suggests that much higher efficiencies could be harnessed. Our study shows that the morphology and orientation of the infiltrated polymer play a critical role in the charge transport of the device, and suggests that better understanding and control of polymer morphology under nano-confinement in the nano-array will be the key to fully reaping the promised benefit of ordered-BHJ devices.

Introduction of methyl groups on vinylene segments of phenylene vinylene systems: synthesis and properties.

A facile synthetic route towards phenylene vinylene systems with methyl substituents at the vinyl linkages is demonstrated through palladium catalyzed Heck coupling of 1,4-diisopropenylbenzene with aryl bromides. The coupling leads to a series of model compounds that feature, in some cases, direct access to a trans-configuration at the double bonds. The oxidative stability of these systems is surprisingly unaffected by the presence of allylic C-H bonds in the methyl substituents. The methyl substituents modulate the electronic properties of the phenylene vinylene systems by inducing a significant twist to the conjugated backbone. The study suggests that the introduction of methyl groups at vinylene sites is a viable alternative to functionalising and tuning the properties of phenylene vinylene systems.

Poly(9,9-dialkyl-3,6-dibenzosilole)--a high energy gap host for phosphorescent light emitting devices.

The preparation of the 3,6-disubstituted dibenzosilole monomers , and by two different routes is described; Suzuki copolymerisation afforded poly(9,9-dioctyl-3,6-dibenzosilole) which has a sufficiently high triplet energy (2.55 eV) to function as a host for green electrophosphorescent emitters.

Poly(2,7-dibenzosilole): a blue light emitting polymer.

2,7-Disubstituted dibenzosilole monomers have been prepared by the selective trans-lithiation of 4,4'-dibromo-2,2'-diiodobiphenyl followed by silylation with dichlorodihexylsilane. Suzuki copolymerization of dibromo and bis(boronate) monomers afforded poly(9,9-dihexyl-2,7-dibenzosilole) which showed better efficiency than the corresponding polyfluorene in a single layer light emitting device. Preliminary studies demonstrated this to be a promising blue light emitting polymer.