RESUMEN
In this study, magnetic fly ash was prepared with fly ash and nano-magnetic Fe3O4, obtained by co-precipitation. Then, a magnetic fly ash/polydimethylsiloxane (MFA@PDMS) sponge was prepared via simple dip-coating PDMS containing ethanol in magnetic fly ash aqueous suspension and solidifying, whereby Fe3O4 played a vital role in achieving the uniformity of the FA particle coating on the skeletons of the sponge. The presence of the PDMS matrix made the sponge super-hydrophobic with significant lubricating oil absorption capacity; notably, it took only 10 min for the material to adsorb six times its own weight of n-hexane (oil phase). Moreover, the MFA@PDMS sponge demonstrated outstanding recyclability and stability, since no decline in absorption efficiency was observed after more than eight cycles. Furthermore, the stress-strain curves of 20 compression cycles presented good overlap, i.e., the maximum stress was basically unchanged, and the sponge was restored to its original shape, indicating that it had good mechanical properties, elasticity, and fatigue resistance.
RESUMEN
In this study, a mixed precursor system of fly ash (50 wt%) and calcium carbide slag (50 wt%) was used to prepare a geopolymer, and the hydration and hardening mechanism of the whole system and the microscopic characterization of the calcium carbide-fly ash based polymer were investigated after the addition of calcium carbide slag. Ca(OH)2 in calcium carbide slag can effectively excite the volcanic ash activity of fly ash, which leads to a more adequate geopolymerization reaction and produces more hydrated calcium silicate (C-S-H) gels. These gels have very high specific surface area and surface adsorption energy. The results showed that the specific surface area of geopolymer was as high as 79.76 m2/g, and through the study of its adsorption capacity of Cu(II) in aqueous solution, the results showed that its removal efficiency of Cu(II) was 97.63% and its adsorption capacity was 58.58 mg/g. By using fly ash and calcium carbide slag as the auxiliary raw materials for the preparation of geopolymer, it not only can promote the reaction of proceeding, but can also act as an excellent adsorption material, and also as an effective way to utilize industrial waste resources.
