Engineering of a decellularized bovine skin coated with antibiotics-loaded electrospun fibers with synergistic antibacterial activity for the treatment of infectious wounds.

An ideal antibacterial wound dressing with strong antibacterial behavior versus highly drug-resistant bacteria and great wound-healing capacity is still being developed. There is a clinical requirement to progress the current clinical cares that fail to fully restore the skin structure due to post-wound infections. Here, we aim to introduce a novel two-layer wound dressing using decellularized bovine skin (DBS) tissue and antibacterial nanofibers to design a bioactive scaffold with bio-mimicking the native extracellular matrix of both dermis and epidermis. For this purpose, polyvinyl alcohol (PVA)/chitosan (CS) solution was loaded with antibiotics (colistin and meropenem) and electrospun on the surface of the DBS scaffold to fabricate a two-layer antibacterial wound dressing (DBS-PVA/CS/Abs). In detail, the characterization of the fabricated scaffold was conducted using biomechanical, biological, and antibacterial assays. Based on the results, the fabricated scaffold revealed a homogenous three-dimensional microstructure with a connected pore network, a high porosity and swelling ratio, and favorable mechanical properties. In addition, according to the cell culture result, our fabricated two-layer scaffold surface had a good interaction with fibroblast cells and provided an excellent substrate for cell proliferation and attachment. The antibacterial assay revealed a strong antibacterial activity of DBS-PVA/CS/Abs against both standard strain and multidrug-resistant clinical isolates of Acinetobacter baumannii, Pseudomonas aeruginosa, and Escherichia coli. Our bilayer antibacterial wound dressing is strongly suggested as an admirable wound dressing for the management of infectious skin injuries and now promises to advance with preclinical and clinical research.

Antimicrobial peptide-loaded decellularized placental sponge as an excellent antibacterial skin substitute against XDR clinical isolates.

Post-wound infections have remained a serious threat to society and healthcare worldwide. Attempts are still being made to develop an ideal antibacterial wound dressing with high wound-healing potential and strong antibacterial activity against extensively drug-resistant bacteria (XDR). In this study, a biological-based sponge was made from decellularized human placenta (DPS) and then loaded with different concentrations (0, 16 µg/mL, 32 µg/mL, 64 µg/mL) of an antimicrobial peptide (AMP, CM11) to optimize an ideal antibacterial wound dressing. The decellularization of DPS was confirmed by histological evaluations and DNA content assay. The DPS loaded with different contents of antimicrobial peptides (AMPs) showed uniform morphology under a scanning electron microscope (SEM) and cytobiocompatibility for human adipose tissue-derived mesenchymal stem cells. Antibacterial assays indicated that the DPS/AMPs had antibacterial behavior against both standard strain and XDR Acinetobacter baumannii in a dose-dependent manner, as DPS loaded with 64 µg/mL showed the highest bacterial growth inhibition zone and elimination of bacteria under SEM than DPS alone and DPS loaded with 16 µg/mL and 32 µg/mL AMP concentrations. The subcutaneous implantation of all constructs in the animal model demonstrated no sign of acute immune system reaction and graft rejection, indicating in vivo biocompatibility of the scaffolds. Our findings suggest the DPS loaded with 64 µg/mL as an excellent antibacterial skin substitute, and now promises to proceed with pre-clinical and clinical investigations.

Chitosan-Placental ECM Composite Thermos-Responsive Hydrogel as a Biomimetic Wound Dressing with Angiogenic Property.

Attempts are being made to develop an ideal wound dressing with excellent biomechanical and biological properties. Here, a thermos-responsive hydrogel is fabricated using chitosan (CTS) with various concentrations (1%, 2.5%, and 5% w/v) of solubilized placental extracellular matrix (ECM) and 20% ß-glycerophosphate to optimize a smart wound dressing hydrogel with improved biological behavior. The thermo-responsive CTS (TCTS) alone or loaded with ECMs (ECM-TCTS) demonstrate uniform morphology using SEM. TCTS and ECM1%-TCTS and ECM2.5%-TCTS show a gelation time of 5 min at 37 °C, while no gel formation is observed at 4 and 25 °C. ECM5%-TCTS forms gel at both 25 and 37 °C. The degradation and swelling ratios increase as the ECM content of the hydrogel increase. All the constructs show excellent biocompatibility in vitro and in vivo, however, the hydrogels with a higher concentration of ECM demonstrate better cell adhesion for fibroblast cells and induce expression of angiogenic factors (VEGF and VEGFR) from HUVEC. Only the ECM5%-TCTS has antibacterial activity against Acinetobacter baumannii ATCC 19606. The data obtained from the current study suggest the ECM2.5%-TCTS as an optimized smart biomimetic wound dressing with improved angiogenic properties now promises to proceed with pre-clinical and clinical investigations.

Gene Expression Programming Model for Tribological Behavior of Novel SiC-ZrO2-Al Hybrid Composites.

In order to improve product format quality and material flexibility, variety of application, and cost-effectiveness, SiC, ZrO2, and Al hybrid composites were manufactured in the research utilizing the powder metallurgy (PM) technique. A model was created to predict the tribological behavior of SiC-ZrO2-Al hybrid composites using statistical data analysis and gene expression programming (GEP) based on artificial intelligence. For the purpose of examining the impact of zirconia concentration, sliding distance, and applied stress on the wear behavior of hybrid composites, a comprehensive factor design of experiments was used. The developed GEP model was sufficiently robust to achieve extremely high accuracy in the prediction of the determine coefficient (R2), the root mean square error (RMSE), and the root relative square error (RRSE). The maximum state of the RMSE was 0.4357 for the GEP-1 (w1) model and the lowest state was 0.7591 for the GEP-4 (w1) model, while the maximum state of the RRSE was 0.4357 for the GEP-1 (w1) model and the minimum state was 0.3115 for the GEP-3 model (w1).

Lanthanum-based metal organic framework (La-MOF) use of 3,4-dihydroxycinnamic acid as drug delivery system linkers in human breast cancer therapy.

Metal organic frameworks (MOFs) have received a lot of attention in the research community due to their unique physical properties, which make them ideal materials for targeted drug delivery systems. In this paper, we describe the synthesis of a non-toxic La-based MOF with 3,4-dihydroxycinnamic acid (3,4-DHCA) as a linker. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), nitrogen adsorption-desorption measurements, and X-ray powder diffraction (XRD) have all been used to characterize it thoroughly. The La-based MOF showed good biocompatibility with the human breast cancer cell line MDA-MB-468. The ability of 3,4-DHCA to treat MDA-MB-468 cells was confirmed by 40.35% cell viability with La-based MOF. Based on the findings, La-based MOF can be recommended as a promising candidate for anticancer delivery.

Fused deposition modelling approach using 3D printing and recycled industrial materials for a sustainable environment: a review.

According to research findings of many peer-reviewed studies, up to 90% of household items may be made of plastic. But nowadays, just a small portion of plastic waste is recycled. Plastic pyrolysis and polymer breakdown are environmentally hazardous. Processing is, therefore, necessary for recycling. Plastics are constantly being manufactured and require minimal processing, necessitating innovation. Plastic recycling is becoming a major issue for environmentalists and waste management professionals. Fused deposition modelling, or FDM, is one of the most popular types of additive manufacturing. It uses the melt extrusion process to deposit filaments of thermal polymers in a predetermined pattern. Using a computer-generated design, 3D printing, sometimes referred to as additive manufacturing, is a technique for building three-dimensional objects layer by layer. A 3D item is produced by the additive method of 3D printing, which involves building up layers of material. To make a three-dimensional object, FDM printers eject a thermoplastic filament that has been heated to its melting point layer by layer. 3D printing is a rapidly expanding industry and the market in this field has grown up to 23% by 2021. Several experiments on new 3D printing materials have been carried out to reduce pollution and the supply of plastic. Various additives have been investigated to increase recycled polymers' molecular weight and mechanical properties. The most frequent type of fibre found in that is thermoplastic fibre. In this instance, waste ABS (acrylonitrile butadiene styrene) plastic from industrial FDM printers was gathered and examined in a bustling open shop. In this review, we discussed the use of recyclable polymers in 3D printing for waste material management.

In vitro production of mouse morphological sperm in artificial testis bioengineered by 3D printing of extracellular matrix.

Since autologous stem cell transplantation is prone to cancer recurrence, in vitro sperm production is regarded a safer approach to fertility preservation. In this study, the spermatogenesis process on testicular tissue extracellular matrix (T-ECM)-derived printing structure was evaluated. Ram testicular tissue was decellularized using a hypertonic solution containing triton and the extracted ECM was used as a bio-ink to print an artificial testis. Following cell adhesion and viability examination, pre-meiotic and post-meiotic cells in the study groups (as testicular suspension and co-culture with Sertoli cells) were confirmed by real-time PCR, flow-cytometry and immunocytochemistry methods. Morphology of differentiated cells was evaluated using transmission electron microscopy (TEM), toluidine blue, Giemsa, and hematoxylin and eosin (H&E) staining. The functionality of Leydig and Sertoli cells was determined by their ability for hormone secretion. The decellularization of testicular tissue fragments was successful and had efficiently removed the cellular debris and preserved the ECM compounds. High cell viability, colonization, and increased expression of pre-meiotic markers in cultured testicular cells on T-ECM-enriched scaffolds confirmed their proliferation. Furthermore, the inoculation of neonatal mouse testicular cells onto T-ECM-enriched scaffolds resulted in the generation of sperm. Morphology evaluation showed that the structure of these cells was quite similar to mature sperm with a specialized tail structure. The hormonal analysis also confirmed production and secretion of testosterone and inhibin B by Leydig and Sertoli cells. T-ECM printed artificial testis is a future milestone that promises for enhancing germ cell maintenance and differentiation, toxicology studies, and fertility restoration to pave the way for new human infertility treatments in the future.

An Efficient Ultrasound-Assisted Synthesis of Cu/Zn Hybrid MOF Nanostructures With High Microbial Strain Performance.

Metal organic frameworks (MOFs) are a promising choice for antibacterial and antifungal activity due to their composition, unique architecture, and larger surface area. Herein, the ultrasonic method was used to synthesize the Cu/Zn-MOF material as an effective hybrid nanostructure with ideal properties. SEM images were used to investigate the product's morphology and particle size distribution. The XRD pattern revealed that the Cu/Zn hybrid MOF nanostructures had a smaller crystalline size distribution than pure Cu and Zn-MOF samples. Furthermore, the BET technique determined that the hybrid MOF nanostructures had a high specific surface area. TG analysis revealed that the hybrid MOF structures were more thermally stable than pure samples. The final product, with remarkable properties, was used as a new option in the field of antibacterial studies. Antibacterial activity was assessed using MIC and MBC against Gram negative and Gram positive strains, as well as antifungal activity using MIC and MFC. The antimicrobial properties of the synthesized Cu/Zn hybrid MOF nanostructures revealed that they were more effective than commercial drugs in some cases. This study's protocol could be a new strategy for introducing new hybrid nanostructures with specific applications.

Structure-Property Relationship for Different Mesoporous Silica Nanoparticles and its Drug Delivery Applications: A Review.

Mesoporous silica nanoparticles (MSNs) are widely used as a promising candidate for drug delivery applications due to silica's favorable biocompatibility, thermal stability, and chemical properties. Silica's unique mesoporous structure allows for effective drug loading and controlled release at the target site. In this review, we have discussed various methods of MSNs' mechanism, properties, and its drug delivery applications. As a result, we came to the conclusion that more in vivo biocompatibility studies, toxicity studies, bio-distribution studies and clinical research are essential for MSN advancement.

Porous Cu-MOF nanostructures with anticancer properties prepared by a controllable ultrasound-assisted reverse micelle synthesis of Cu-MOF.

The ultrasonic assisted reverse micelle method (UARM) was used to synthesize Cu-MOF from Cu(NO3)2·3H2O and 2,6-pyridine dicarboxylic acid in a 1:1 molar proportion. It has been characterized using FT-IR, XRD, nitrogen adsorption analysis, SEM and TEM-EDX. The morphology of Cu-MOFs was spherical, with an average particle size distribution of less than 100 nm. Using BET analysis, the surface area of Cu-MOF was found to be 284.94 m2/g. The porous morphology of Cu-MOF was also suggested by SEM and TEM analyses. It has anticancer properties against MCF-7 breast cancer cells. Cytotoxicity testing was performed on MCF-7 breast cancer cells using the MTT cell viability assay, and cell proliferation and viability were found to be approximately 24% higher than the control.

Conducting polymers/zinc oxide-based photocatalysts for environmental remediation: a review.

The accessibility to clean water is essential for humans, yet nearly 250 million people die yearly due to contamination by cholera, dysentery, arsenicosis, hepatitis A, polio, typhoid fever, schistosomiasis, malaria, and lead poisoning, according to the World Health Organization. Therefore, advanced materials and techniques are needed to remove contaminants. Here, we review nanohybrids combining conducting polymers and zinc oxide for the photocatalytic purification of waters, with focus on in situ polymerization, template synthesis, sol-gel method, and mixing of semiconductors. Advantages include less corrosion of zinc oxide, less charge recombination and more visible light absorption, up to 53%.

Taguchi-Assisted Optimization Technique and Density Functional Theory for Green Synthesis of a Novel Cu-MOF Derived From Caffeic Acid and Its Anticancerious Activities.

In this paper, we have reported an innovative greener method for developing copper-metal organic frameworks (Cu-MOFs) using caffeic acid (CA) as a linker extracted from Satureja hortensis using ultrasonic bath. The density functional theory is used to discuss the Cu-MOF-binding reaction mechanism. In order to achieve a discrepancy between the energy levels of the interactive precursor orbitals, the molecules have been optimized using the B3LYP/6-31G method. The Taguchi method was used to optimize the key parameters for the synthesis of Cu-MOF. FT-IR, XRD, nitrogen adsorption, and SEM analyses are used to characterize it. The adsorption/desorption and SEM analyses suggested that Cu-MOF has a larger surface area of 284.94 m2/g with high porosity. Cu-MOF has shown anticancer activities against the human breast cancer (MDA-MB-468) cell lines, and it could be a potent candidate for clinical applications.

Methods of green synthesis of Au NCs with emphasis on their morphology: A mini-review.

Greener synthetic methods are becoming more popular as a means of reducing environmental pollution caused by reaction byproducts. Another important advantage of green methods is their low cost and the abundance of raw materials. Herein, we investigate the green Au nanoclusters (NCs) using microorganisms (bacteria and fungi) and plant extraction with various shapes and development routes. Natural products derived from plants, tea, coffee, banana, simple amino acids, enzyme, sugar, and glucose have been used as reductants and as capping agents during synthesis in literature. The synthesis techniques are generally chemical, physical and green methods. Green synthesis of Au NCs using bacteria and fungi can be divided into intracellular and extracellular. In an intracellular manner, bacterial cells are implanted in a culture medium containing salt and heated under suitable growth conditions. However, in an extracellular manner, the Au ions are directed from the outside into the cell. Thus, these methods are considered as a better alternative to chemical and physical synthesis. The research on green synthesis of Au nanoparticles (NPs) and its influence on their size and morphology are summarized in this review.

Long-term preservation effects on biological properties of acellular placental sponge patches.

Decellularization, preservation protocol and storage time influence the biomechanical and biological properties of allografts and xenografts. Here, we examined the consequences of storage time on the antibacterial, angiogenic and biocompatibility properties of the decellularized placental sponge (DPS) in vitro and in vivo. The DPS samples were preserved for one, three and six months at -20 °C. The decellularized scaffolds showed uniform morphology with interconnected pores compared with not decellularized sponges. Storage time did not interfere with collagen and vascular endothelial growth factor contents, and cytobiocompatibility for Hu02 fibroblast cells. Chorioallantoic membrane assay and subcutaneous implantation indicated a decreased new vessel formation and neovascularization in six months DPS sample compared with other experimental groups. The number of CD4+ and CD68+ cells infiltrated into the six months DPS on the implanted site showed a significant increase compared with one and three months sponges. The antibacterial activities and angiogenic properties of the DPS decreased over storage time. Three months preservation at -20 °C is suggested as the optimal storage period to retain its antibacterial activity and high stimulation of new vessel formation. This storage protocol could be considered for preservation of similar decellularized placenta-derived products with the aim of retaining their biological properties.

A novel synthesis of new antibacterial nanostructures based on Zn-MOF compound: design, characterization and a high performance application.

In this study, the novel zinc metal-organic frameworks (MOF) nanostructure has been employed, which was developed using an affordable, environmental friendly, efficient and fast method of ultrasound-assisted reverse micelle (UARM). These nanostructures were identified with various techniques such as FT-IR, XRD, BET, SEM, TG-DSC, TEM and EDS. It was found that the Zn-MOF samples have favorable physicochemical properties. The impact of experimental parameters of the UARM method is effective on the resulting properties, such as high surface area of the products that increases the interactions between the Zn-MOF nanostructure and bacteria.Their antibacterial activities were investigated using diffusion methods in agar and also with dilutions of Zn-MOF samples. Antibiotics (tetracycline and ampicillin) and their anti-biofilm effects were evaluated using microplate method. Obtained results revealed that the Zn-MOF nanostructures have high antibacterial properties which, could be due to the nature of the applied Zn-MOF as well as the optimization process. The Zn- MOF nanostructures could be a novel antibacterial material as biocatalyst processes.

Modulation of Hypertrophic Scar Formation Using Amniotic Membrane/Electrospun Silk Fibroin Bilayer Membrane in a Rabbit Ear Model.

Hypertrophic scarring is a dermal disorder resulting from collagen and other extra cellular matrix protein depositions following the deep trauma, severe burn injury, and surgery incisions. A variety of therapeutic procedures are currently available, however, achieving an ideal treatment method remains a challenge. In our recently published report, a 3D bilayered decellularized human amniotic membrane/electrospun silk fibroin membrane was fabricated and characterized for regenerative medical applications. To obtain a solid bind between two layers, the samples were immersed in 70% ethanol. In this study, the effects of amniotic membrane/electrospun silk fibroin on minimizing the postinjury hypertrophic scar formation were determined in the rabbit ear model. In vivo experiments were carried out to assess the bilayer membrane characteristics on full thickness hypertrophic scar at days 28 and 50 postimplantations. A significant decrease in collagen deposition and expression and increased expression and deposition of MMP1 in the wound bed were observed on the wounds dressed with bilayered membrane when compared to the amniotic membrane alone and controls (wound with no implant). The current study shows that our fabricated construct has potential as an efficient antiscarring wound dressing material and may also serve for the subsequent soft tissue engineering needs.

Spectral and thermal characterization of halogen-bonded novel crystalline oligo(p-bromoacetophenone formaldehyde).

A novel oligomer p-bromoacetophenone-formaldehyde (OPBAF) was prepared by condensation polymerization in the presence of an acid as catalyst. It was characterized by FT-IR, NMR, pyrolysis GC/MS, XRD, GPC, and TG-DTG. The crystallographic parameters and space group for hexagonal OPBAF were a = b = 2.0810 Å and c = 9.2340 Å and P3̅m1, respectively. The degradation activation energy of the oligomer was studied by the Kissinger method. The kinetic parameters were also obtained. Halogen bonding interactions in the crystalline oligomers are identified between halogen···carbonyl and halogen···halogen. Little correlation was found in the halogen bonding motifs exhibited as a function of bromine present in this oligomer, and a unique bifurcated Br···Br/Br···O═C halogen bonding synthon was identified. This newly developed oligomer may be used as an interesting material for the development of 3D-designed structural products.