Range-resolved detection of boundary layer stable water vapor isotopologues using a ground-based 1.98 µm differential absorption LIDAR.

This paper presents a first demonstration of range-resolved differential absorption LIDAR (DIAL) measurements of the water vapor main isotopologue H2 16O and the less abundant semi-heavy water isotopologue HD16O with the aim of determining the isotopic ratio. The presented Water Vapor and Isotope Lidar (WaVIL) instrument is based on a parametric laser source emitting nanosecond pulses at 1.98 µm and a direct-detection receiver utilizing a commercial InGaAs PIN photodiode. Vertical profiles of H2 16O and HD16O were acquired in the planetary boundary layer in the suburban Paris region up to a range of 1.5 km. For time averaging over 25 min, the achieved precision in the retrieved water vapor mixing ratio is 0.1 g kg-1 (2.5% relative error) at 0.4 km above ground level (a.g.l.) and 0.6 g kg-1 (20%) at 1 km a.g.l. for 150 m range bins along the LIDAR line of sight. For HD16O, weaker absorption has to be balanced with coarser vertical resolution (600 m range bins) in order to achieve similar relative precision. From the DIAL measurements of H2 16O and HD16O, the isotopic abundance δD was estimated as -51‰ at 0.4 km above the ground and -119‰ in the upper part of the boundary layer at 1.3 km a.g.l. Random and systematic errors are discussed in the form of an error budget, which shows that further instrumental improvements are required on the challenging path towards DIAL-profiling of the isotopic abundance with range resolution and precision suitable for water cycle studies.

EUREC4A: A Field Campaign to Elucidate the Couplings Between Clouds, Convection and Circulation.

Trade-wind cumuli constitute the cloud type with the highest frequency of occurrence on Earth, and it has been shown that their sensitivity to changing environmental conditions will critically influence the magnitude and pace of future global warming. Research over the last decade has pointed out the importance of the interplay between clouds, convection and circulation in controling this sensitivity. Numerical models represent this interplay in diverse ways, which translates into different responses of trade-cumuli to climate perturbations. Climate models predict that the area covered by shallow cumuli at cloud base is very sensitive to changes in environmental conditions, while process models suggest the opposite. To understand and resolve this contradiction, we propose to organize a field campaign aimed at quantifying the physical properties of trade-cumuli (e.g., cloud fraction and water content) as a function of the large-scale environment. Beyond a better understanding of clouds-circulation coupling processes, the campaign will provide a reference data set that may be used as a benchmark for advancing the modelling and the satellite remote sensing of clouds and circulation. It will also be an opportunity for complementary investigations such as evaluating model convective parameterizations or studying the role of ocean mesoscale eddies in air-sea interactions and convective organization.

Observing the forest canopy with a new ultra-violet compact airborne lidar.

We have developed a new airborne UV lidar for the forest canopy and deployed it in the Landes forest (France). It is the first one that: (i) operates at 355 nm for emitting energetic pulses of 16 mJ at 20 Hz while fulfilling eye-safety regulations and (ii) is flown onboard an ultra-light airplane for enhanced flight flexibility. Laser footprints at ground level were 2.4 m wide for a flying altitude of 300 m. Three test areas of ≈ 500 × 500 m(2) with Maritime pines of different ages were investigated. We used a threshold method adapted for this lidar to accurately extract from its waveforms detailed forest canopy vertical structure: canopy top, tree crown base and undergrowth heights. Good detection sensitivity enabled the observation of ground returns underneath the trees. Statistical and one-to-one comparisons with ground measurements by field foresters indicated a mean absolute accuracy of ≈ 1 m. Sensitivity tests on detection threshold showed the importance of signal to noise ratio and footprint size for a proper detection of the canopy vertical structure. This UV-lidar is intended for future innovative applications of simultaneous observation of forest canopy, laser-induced vegetation fluorescence and atmospheric aerosols.

New approach for aerosol profiling with a lidar onboard an ultralight aircraft: application to the African Monsoon Multidisciplinary Analysis.

A new airborne instrumental payload has been designed for an ultralight aircraft to determine the vertical profile of aerosol optical properties. It is based on Lidar Aérosols UltraViolet Aéroporté (LAUVA), a compact backscattering lidar system emitting at the wavelength of 355 nm. We operated this airborne configuration in the Sahel from the city of Niamey (Niger) during the first campaign of the African Monsoon Multidisciplinary Analysis (AMMA) in January-February 2006, when aerosols from both soil dust and savannah fires cause large visibility reductions. We take advantage of the lidar capability of pointing in different directions for retrieving the vertical profile of the aerosol backscatter to extinction ratio (BER). A synergy with a scatterometer (880 nm) and a ground-based sunphotometer allows us to further determine the vertical profile of Angström exponent (a). We identify three types of aerosol layers up to about 5 km below the free troposphere, dominated by biomass burning (BB) particles, mineral dust (D) particles, and a mixing between BB and D particles, respectively, associated with BER (a) values close to 0.008 sr(-1) (1.5), 0.025 sr(-1) (0), and 0.015 sr(-1) (0.4-1).

Experimental and theoretical studies of the aureole about a point source that is due to atmospheric scattering in the middle ultraviolet.

In the atmosphere, pointlike sources are surrounded by aureoles because of molecular and aerosol scattering. In various meteorological conditions, this variance field can be a nonnegligible part of the signal detected by a large-field-of-view sensor. A model based on a Monte Carlo technique has been developed to simulate the propagation of radiation coming from a UV point source. The model was validated with an experimental comparison by a photon-counting technique, and good agreement between experimental and theoretical results was found.

Variational method for the retrieval of the optical thickness and the backscatter coefficient from multiangle lidar profiles.

A variational method for retrieving the aerosol optical thickness and backscatter coefficient profiles from multiangle lidar measurements is presented and discussed. A monostatic single-wavelength low-energy lidar system was operated at different zenith angles during the Indian Ocean Experiment (INDOEX) campaign in 1999 to characterize the aerosol plumes in the Indian monsoon. The variational method was applied to lidar data to retrieve profiles of optical thickness and the backscatter coefficient for nighttime and daytime measurements. Results are obtained with an uncertainty of 10% below 3 km (nighttime) and 2.8 km (daytime) and a bias of less than 0.01. During daytime the retrieval of optical parameters is indeed limited to a lower altitude owing to the sky background signal and the atmospheric inhomogeneity. In both cases the total aerosol optical thickness is consistent (+/- 10%) with the integrated value derived from sunphotometer measurements. Backscatter-to-extinction ratios estimated in different regions by two distinct methods compared well, which proves the capability of the method to assess optical measurements and account for the altitude dependence of the phase function.