Microalgae have been widely recognized as a promising feedstock for sustainable biofuels production to tackle global warming and pollution issues related to fossil fuels uses. This study identified and analyzed indigenous microalgae strains for biodiesel production, specifically Chlorella vulgaris and Coelastrella thermophila var. globulina, from two distinct locations in Algeria. Molecular identification confirmed their identity, and the microalgae exhibited notable growth characteristics. Local Chlorella vulgaris and Coelastrella thermophila var. globulina showed good growth and high biomass yield, compared to Chlorella vulgaris CCAP211/11B reaching a weight of 1.48 g L-1 , 1.95 g L-1 , and 2.10 g L-1 , respectively. Lipids content of local Chlorella vulgaris, Coelastrella thermophila var. globulina, and Chlorella vulgaris CCAP211/11B, were found to be 31.39 ± 3.3%, 17 ± 2.26%, and 19 ± 0.64%, respectively. Chlorella vulgaris stood out as a candidate for biodiesel production due to its equilibrium between SFA and PUFA (43.24% and 45.27%). FAs are predominated by SFA and MUFA for Coelastrella thermophila var. globulina with value of 81.49% (SFA+MUFA). Predicted biodiesel qualities comply with ASTM6751 and EN14214 standards. Studied microalgae have therefore a promising potential for biodiesel production. However, optimising cultivation conditions is necessary to enhance biomass and lipids yield at a large scale.
Chlorella vulgaris , Microalgae , Fatty Acids , Biofuels , Biomass
Guayule (Parthenium argentatum Gray) is a semi-arid shrub, native from the Chihuahan desert. This plant produces polyisoprene and resin. Polyisoprene is the main focal point of many researches, from structure to properties. Today, some processes are used to extract polyisoprene under its dry form, using solvent extraction, to produce rubber (used in truck or airplane tires) or as an emulsion, to make latex products by dipping (used in medical gloves, condoms, etc.). This article focuses on guayule resin which has some interesting applications in adhesives, coatings, pharmaceuticals, etc. In order to better know the resin composition and to be able to perform comparisons between varieties or seasons, liquid and gas chromatographic analysis methods have been described, for the groups of molecules composing the resin (polyphenols, guayulins, free fatty acids, di and triacylglycerols, argentatins, alkanes, alkanals, sugars, organic acids). Unlike other articles, this study aims to analyze all components of the same resin; the average composition of a guayule resin is given.
Water is considered the greenest solvent. Nonetheless, the water solubility of natural products is still an incredibly challenging issue. Indeed, it is nearly impossible to solubilize or to extract many natural products properly using solely water due to their low solubility in this solvent. To address this issue, researchers have tried for decades to tune water properties to enhance its solvent potential in order to be able to solubilise or extract low-water solubility compounds. A few methods involving the use of solubilisers were described in the early 2000s. Since then, and particularly in recent years, additional methods have been described as useful to ensure the effective green extraction but also solubilisation of natural products using water as a solvent. Notably, combinations of these green methods unlock even higher extraction performances. This review aims to present, compare and analyse all promising methods and their relevant combinations to extract natural products from bioresources with water as solvent enhanced by green solubilisers and/or processes.
Proteins from alternative sources including terrestrial and aquatic plants, microbes and insects are being increasingly explored to combat the dietary, environmental and ethical challenges linked primarily to conventional sources of protein, mainly meat and dairy proteins. Ultrasound (US) technologies have emerged as a clean, green and efficient methods for the extraction of proteins from alternative sources compared to conventional methods. However, the application of US can also lead to modifications of the proteins extracted from alternative sources, including changes in their nutritional quality (protein content, amino acid composition, protein digestibility, anti-nutritional factors) and allergenicity, as well as damage of the compounds associated with an increased degradation resulting from extreme US processing conditions. This work aims to summarise the main advances in US equipment currently available to date, including the main US parameters and their effects on the extraction of protein from alternative sources, as well as the studies available on the effects of US processing on the nutritional value, allergenicity and degradation damage of these alternative protein ingredients. The main research gaps identified in this work and future challenges associated to the widespread application of US and their scale-up to industry operations are also covered in detail.
Evidence Gaps
Hexane is a solvent used extensively in the food industry for the extraction of various products such as vegetable oils, fats, flavours, fragrances, colour additives or other bioactive ingredients. As it is classified as a "processing aid", it does not have to be declared on the label under current legislation. Therefore, although traces of hexane may be found in final products, especially in processed products, its presence is not known to consumers. However, hexane, and in particular the n-hexane isomer, has been shown to be neurotoxic to humans and has even been listed as a cause of occupational diseases in several European countries since the 1970s. In order to support the European strategy for a toxic-free environment (and toxic-free food), it seemed important to collect scientific information on this substance by reviewing the available literature. This review contains valuable information on the nature and origin of the solvent hexane, its applications in the food industry, its toxicological evaluation and possible alternatives for the extraction of natural products. Numerous publications have investigated the toxicity of hexane, and several studies have demonstrated the presence of its toxic metabolite 2,5-hexanedione (2,5-HD) in the urine of the general, non-occupationally exposed population. Surprisingly, a tolerable daily intake (TDI) has apparently never been established by any food safety authority. Since hexane residues are undoubtedly found in various foods, it seems more than necessary to clearly assess the risks associated with this hidden exposure. A clear indication on food packaging and better information on the toxicity of hexane could encourage the industry to switch towards one of the numerous other alternative extraction methods already developed.
The food industry has recently been under unprecedented pressure due to major global challenges, such as climate change, exponential increase in world population and urbanization, and the worldwide spread of new diseases and pandemics, such as the COVID-19. The fourth industrial revolution (Industry 4.0) has been gaining momentum since 2015 and has revolutionized the way in which food is produced, transported, stored, perceived, and consumed worldwide, leading to the emergence of new food trends. After reviewing Industry 4.0 technologies (e.g. artificial intelligence, smart sensors, robotics, blockchain, and the Internet of Things) in Part I of this work (Hassoun, Aït-Kaddour, et al. 2022. The fourth industrial revolution in the food industry-Part I: Industry 4.0 technologies. Critical Reviews in Food Science and Nutrition, 1-17.), this complimentary review will focus on emerging food trends (such as fortified and functional foods, additive manufacturing technologies, cultured meat, precision fermentation, and personalized food) and their connection with Industry 4.0 innovations. Implementation of new food trends has been associated with recent advances in Industry 4.0 technologies, enabling a range of new possibilities. The results show several positive food trends that reflect increased awareness of food chain actors of the food-related health and environmental impacts of food systems. Emergence of other food trends and higher consumer interest and engagement in the transition toward sustainable food development and innovative green strategies are expected in the future.
This work focuses on the selection and the optimization of an efficient green-extraction method, used to recover a thymol-enriched extract from thyme (Thymus vulgaris L), as well as the evaluation of the inhibitory effect of this latter on the human platelet aggregation. Different innovative extraction techniques, namely bead milling extraction, ultrasound and microwave assisted extraction, were tested for their ability to recover a high added value extract from thyme. Among all tested eco-extraction techniques, microwave extraction (MAE) was the best method in term of its extraction yield (20.84% ± 0.51), thymol concentration (731.71 mg/g) and total phenolic (23.53 ± 1.83 mg (GAE)/g of extract) and flavonoid (6.22 ± 0.35 mg of QE/g of extract) contents. Moreover, thyme extract obtained by microwave assisted extraction (TMAE) showed the most active antioxidant effect comparing to the other tested extracts. Based on these results, TMAE was chosen to be evaluated for its antiplatelet effect. Thereby, arachidonic acid, collagen and ADP were used to induce the platelet aggregation on human platelet rich plasma taken from healthy controls and results revealed that TMAE strongly inhibited the induced platelet aggregation. Indeed, TMAE exhibited potent antiaggregant activity by inhibiting platelet activation, secretion and aggregation. Additionally, cytotoxicity assay on normal HEK-293 cells showed that TMAE has no cytotoxic effect even at high concentration (8 mg/ml) and can further be taken up to various biomedical applications mainly in the prevention of cardiovascular diseases.
Thymus Plant , Blood Platelets , HEK293 Cells , Humans , Plant Extracts/pharmacology , Plant Leaves , Thymol/pharmacology
Despite its severe toxicity and negative environmental impact, hexane remain the solvent of choice for the extraction of vegetable oils. This is in contrast with the constantly growing demand for sustainable and green extraction processes. In recent years a variety of alternatives to hexane have been reported, among them 2-methyloxolane (2-MeOx), which has emerged as a promising bio-based alternative. This study evaluates the possibility of replacing hexane, in the extraction of olive pomace (OP), with 2-MeOx, both dry and saturated with water (4.5%), the latter of which is called 2-MeOx 95.5%. The three solvents have been compared in terms of extraction yield and quality, as well as the lipid and polyphenol profiles of the extracts. The work concluded that both dry 2-MeOx and 2-MeOx 95.5% can replace hexane in OP extraction, resulting in higher yields and extracts richer in phenolic compounds. This study should open the road to further semi-industrial scale investigations toward more sustainable production processes.
Cocoa husk is considered a waste product after cocoa processing and creates environmental issues. These waste products are rich in polyphenols, methylxanthine, dietary fibers, and phytosterols, which can be extracted and utilized in various food and health products. Cocoa beans represent only 32-34% of fruit weight. Various extraction methods were implemented for the preparation of extracts and/or the recovery of bioactive compounds. Besides conventional extraction methods, various studies have been conducted using advanced extraction methods, including microwave-assisted extraction (MAE), ultrasonic-assisted extraction (UAE), subcritical water extraction (SWE), supercritical fluid extraction (SFE), and pressurized liquid extraction (PLE). To include cocoa husk waste products or extracts in different food products, various functional foods such as bakery products, jam, chocolate, beverage, and sausage were prepared. This review mainly focused on the composition and functional characteristics of cocoa husk waste products and their utilization in different food products. Moreover, recommendations were made for the complete utilization of these waste products and their involvement in the circular economy.
Olive pomace is the main by-product generated by the olive oil production process. Although toxic to the environment, olive pomace is an important source of natural antioxidants due to its high content of phenolic compounds. The aim of the current study is to maximize the extraction yields of the main phenolic compounds present in olive pomace using innovative green technologies. For this purpose, the present work is divided into two parts. The first part is based on a solubility study of targeted phenolic compounds in various ethanol/water ratios at two different temperatures (20 °C and 50 °C). A computational prediction using COSMO-RS software was applied for the calculation of eventual solubility, which was subsequently confirmed by practical experiments. The determination of the optimal extraction conditions of solvent ratio (EtOH/H2O) (60:40 v/v) and temperature (50 °C) led to the second part of the work, which concerns the intensification of extraction yields. Furthermore, various green extractions using innovative technologies, including accelerated solvent extraction (ASE), ultrasound with its both system (probe (UAE-P) and bath (UAE-B)), bead milling (BM) and microwave (MAE), were carried out and then compared to conventional maceration (CM). Results showed that ASE was the most effective method for extracting phenolic compounds from dried olive pomace powder (5.3 milligrams of tyrosol equivalent (TE) per gram of dried olive pomace powder (DOP)) compared to CM (3.8 mg TE/g DOP).
Olea , Powders , Phenols , Solvents , Ethanol
Interest in essential oils has consistently increased in recent years. Essential oils have a large variety of applications in multiple fields, including in the food, cosmetics and pharmaceutical industries. The volatile fraction (VF) in hops (Humulus lupulus L.) fits within this domain as it is primarily used in the brewery industry for the aromatization of beer, and is responsible for the floral and fruity tones. This work aims to design an optimized extraction protocol of the VF from hops, using microwaves. Microwave-assisted hydrodistillation (MAHD) has been developed to reduce energy and time consumption in lab-scale reactors up to industrial-scale systems. Hops are principally available in three forms, according to a brewery's applications: (i) fresh (FH); (ii) dried (DH) and (iii) pelletized (PH). In this work, all three forms have therefore been studied and the recovered volatiles characterized by means of GC-MS. The optimized lab-scale MAHD protocol gave the best extraction yield of 20.5 mLVF/kgdry matrix for FH. This value underwent a slight contraction when working at the highest matrix amount (3 kg), with 17.3 mLVF/kgdry matrix being achieved. Further tests were then performed in a pilot reactor that is able to process 30 kg of material. In this case, high yield increases were observed for PH and DH; quadruple and double the lab-scale yields, respectively. In addition, this industrial-scale system also provided marked energy savings, practically halving the absorbed kJ/mLVF.
Citrus genus is a prominent staple crop globally. Long-term breeding and much hybridization engendered a myriad of species, each characterized by a specific metabolism generating different secondary metabolites. Citrus aurantium L., commonly recognized as sour or bitter orange, can exceptionally be distinguished from other Citrus species by unique characteristics. It is a fruit with distinctive flavor, rich in nutrients and phytochemicals which possess different health benefits. This paper presents an overview of the most recent studies done on the matter. It intends to provide an in-depth understanding of the biological activities and medicinal uses of active constituents existing in C. aurantium. Every plant part is first discussed separately with regards to its content in active constituents. All extraction methods, their concepts and yields, used to recover these valuable molecules from their original plant matrix are thoroughly reported.
Citrus/chemistry , Phytochemicals/analysis , Phytochemicals/isolation & purification , Plant Extracts/analysis , Plant Extracts/isolation & purification , Phytochemicals/pharmacology , Plant Extracts/pharmacology
Solvent-free microwave extraction (SFME) is a combination of microwave heating and dry distillation performed at atmospheric pressure without the addition of water or organic solvents that has been proposed as a green method for the extraction of essential oils from aromatic and medicinal herbs. In this work, SFME and the conventional techniques of steam distillation (SD) and hydrodistillation (HD) were compared with respect to the extraction and antioxidant and antimicrobial activities of Thymus mastichina essential oil. The main constituent of essential oils obtained using different methods was 1,8-cineole (eucalyptol). The results showed that the essential oils extracted by means of SFME in 30 min were quantitatively (yield) and qualitatively (aromatic profile) similar to those obtained using conventional HD over 120 min. In addition, SFME generates less waste and less solvent, consumes less energy, and provides a higher yield for a shorter extraction time, which is advantageous for the extraction of the T. mastichina essential oil compared to SD. The antioxidant and antimicrobial activities of the T. mastichina essential oil obtained from either SFME or conventional extraction methods (SD or HD) showed a similar pattern. Large-scale experiments using this SFME procedure showed a potential industrial application.
Natural rubber is an essential material, especially for plane and truck tyres but also for medical gloves. Asia ranks first in the production of natural rubber, of which the Hevea tree is currently the sole source. However, it is anticipated that this source alone will not be able to fulfill the growing demand. Guayule, a shrub native to northern Mexico and southern United States, may also contribute. This plant not only contains polyisoprene, but also resin, a mixture of lipids and terpenoids. This review summarizes various aspects of this plant, from the usage history, botanical description, geographical distribution and cultivation practices, down to polyisoprene and resin biosynthesis including their distribution within the plant and molecular composition. Finally, the main processes yielding dry rubber or latex are depicted, as well as the properties of the various extracts along with economic considerations. The aim is to provide a wide picture of current knowledge available about this promising crop, a good feedstock candidate for a multiple-product biorefinery.
Asteraceae/chemistry , Resins, Plant/chemistry , Animals , Asia , Humans , Latex/chemistry , Mexico , Rubber/chemistry , United States
The water-based extraction of bioactive components from flavonoid-rich medicinal plants is a key step that should be better investigated. This is especially true when dealing with easy-to-use home-made conditions of extractions, which are known to be a bottleneck in the course for a better control and optimization of the daily uptake of active components from medicinal plants. In this work, the water-based extraction of Blackcurrant (Ribes nigrum) leaves (BC) and Chrysanthellum americanum (CA), known to have complementary pharmacological properties, was studied and compared with a previous work performed on the extraction of Hawthorn (Crataegus, HAW). Various extraction modes in water (infusion, percolation, maceration, ultrasounds, microwaves) were compared for the extraction of bioactive principles contained in BC and CA in terms of extraction yield, of amount of flavonoids, phenolic compounds, and proanthocyanidin oligomers, and of UHPLC profiles of the extracted compounds. The qualitative and quantitative aspects of the extraction, in addition to the kinetic of extraction, were studied. The optimized easy-to-use-at-home extraction protocol developed for HAW was found very efficient to easily extract bioactive components from BC and CA plants. UHPLC-ESI-MS and high-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) were also implemented to get more qualitative information on the specific and common chemical compositions of the three plants (including HAW). Their antihyaluronidase, antioxidant, and antihypertensive activities were also determined and compared, demonstrating similar activities as the reference compound for some of these plants.
The objective of this study was to evaluate the potential of green solvents for extractions of bioactive compounds (BACs) and essential oils from wild thyme (Thymus serpyllum L.) using theoretical and experimental procedures. Theoretical prediction was assessed by Hansen solubility parameters (HSPs) and conductor-like screening model for realistic solvents (COSMO-RS), to predict the most suitable solvents for extraction of BACs. An experimental procedure was performed by nonthermal technology high voltage electrical discharge (HVED) and it was compared with modified conventional extraction (CE). Obtained extracts were analyzed for chemical and physical changes during the treatment. Theoretical results for solution of BACs in ethanol and water, as green solvents, were confirmed by experimental results, while more accurate data was given by COSMO-RS assessment than HSPs. Results confirmed high potential of HVED for extraction of BACs and volatile compounds from wild thyme, in average, 2.03 times higher yield of extraction in terms of total phenolic content was found compared to CE. The main phenolic compound found in wild thyme extracts was rosmarinic acid, while the predominant volatile compound was carvacrol. Obtained extracts are considered safe and high-quality source reach in BACs that could be further used in functional food production.
Chemical Fractionation/methods , Electric Conductivity , Phenols/chemistry , Phenols/isolation & purification , Thymus Plant/chemistry , Volatile Organic Compounds/chemistry , Volatile Organic Compounds/isolation & purification , Chromatography, High Pressure Liquid , Electricity , Gas Chromatography-Mass Spectrometry , Green Chemistry Technology , Phenols/pharmacology , Plant Extracts/chemistry , Plant Extracts/isolation & purification , Plant Extracts/pharmacology , Solubility , Tandem Mass Spectrometry , Volatile Organic Compounds/pharmacology
Rosemary (Rosmarinus officinalis L.) is a Mediterranean medicinal and aromatic plant widely used due to valuable bioactive compounds (BACs) and aromas. The aim of the study was to evaluate the extraction of intracellular compounds from rosemary combining experimental procedure by means of high voltage electrical discharge (HVED), with a theoretical approach using two computational simulation methods: conductor-like screening model for real solvents and Hansen solubility parameters. The optimal HVED parameters were as follows: frequency 100 Hz, pulse width 400 ns, gap between electrodes 15 mm, liquid to solid ratio 50 mL/g, voltage 15 and 20 kV for argon, and 20 and 25 kV for nitrogen gas. Green solvents were used, water and ethanol (25% and 50%). The comparison was done with modified conventional extraction (CE) extracted by magnetic stirring and physicochemical analyses of obtained extracts were done. Results showed that HVED extracts in average 2.13-times higher total phenol content compared to CE. Furthermore, nitrogen, longer treatment time and higher voltage enhanced higher yields in HVED extraction. HVED was confirmed to have a high potential for extraction of BACs from rosemary. The computational stimulation methods were confirmed by experimental study, ethanol had higher potential of solubility of BACs and aromas from rosemary compared to water.
Odorants/analysis , Plant Extracts/analysis , Plant Extracts/isolation & purification , Rosmarinus/chemistry , Solvents/chemistry , Chemical Fractionation , Electricity , Models, Theoretical
This review presents a complete picture of current knowledge on 2-methyloxolane (2-MeOx), a bio-based solvent for the extraction of natural products and food ingredients. It provides the necessary background about the properties of 2-MeOx, not only its solvent power and extraction efficiency, but its detailed toxicological profile and environmental impacts are discussed. We compared 2-MeOx with hexane which is the most used petroleum-based solvent for extraction of lipophilic natural products. The final part focuses on successful industrial transfer, including technologic, economic, and safety impacts. The replacement of petroleum-based solvents is a hot research topic, which affects several fields of modern plant-based chemistry. All the reported applications have shown that 2-MeOx is an environmentally and economically viable alternative to conventional petroleum-based solvents for extraction of lipophilic foodstuff and natural products.
Biological Products/chemistry , Green Chemistry Technology , Hexanes/chemistry
A valued marine oil rich in omega-3 lipids and natural astaxanthin is obtained with remarkably high yield (up to 5 wt %) extending to pink shrimp waste (head and carapace) using the approach to extract fish oil from fish processing byproducts using d-limonene. Biobased limonene is an excellent solvent for both unsaturated lipids and astaxanthin-based carotenoids preventing oxidative degradation during the extraction cycle including solvent separation at 85 °C. Explaining the deep red color of the shrimp oil obtained, computational simulation suggests that d-limonene is also a good solvent for natural astaxanthin abundant in shrimp.
