Meta-analysis of the accuracy for RASSF1A methylation in bronchial aspirates for the diagnosis of lung cancer.

OBJECTIVE: To establish the diagnostic accuracy of RASSF1A (Ras association domain family 1 isoform) methylation using bronchial aspirates as an auxiliary method for diagnosing lung cancer through a systematic review and meta-analysis. METHODS: Studies published prior to October 30, 2022, were retrieved from the Embase, PubMed, Web of Science, and Wan Fang databases using the keywords "lung cancer", "RASSF1A", "methylation", and "bronchial aspirates". A fixed or random effect model was used to calculate the combined sensitivity, specificity, positive likelihood ratios (LR), negative LR, diagnostic odds ratio (DOR), along with the respective 95% confidence intervals (CIs) and the area under the curve (AUC) with Q index. The threshold effect was defined by using the Spearman correlation coefficient, and the Deeks funnel plot was generated to evaluate publication bias. RESULTS: Among the 12 trials that met the inclusion criteria, a total of 2388 participants were involved. The pooled results for the diagnosis of lung cancer were as follows, when compared to the pathological diagnosis: sensitivity of 0.47 (95% CI: 0.45-0.50), specificity of 0.96 (95% CI: 0.95-0.97), positive LR of 12.18 (95% CI: 8.96-16.55), negative LR of 0.56 (95% CI: 0.52-0.61), DOR of 24.05 (95% CI: 17.29-33.47), and AUC of 0.78 (Q index = 0.72), respectively. The sensitivity of the RASSF1A methylation assay was relatively low in a detailed subgroup analysis, fluctuating between 0.39 and 0.90, indicating a limitation in its diagnostic value for lung cancer. The RASSF1A methylation assay, on the other hand, demonstrated excellent specificity, suggesting a high exclusion value. Of note, the diagnostic sensitivity, specificity, DOR, and AUC for small cell lung cancer were 0.90 (0.84-0.94), 0.95 (0.94-0.97), 249.5 (103.94-598.8), and 0.98, respectively, showing that RASSF1A methylation was a promising biomarker for diagnosing small cell lung cancer with both high diagnostic and exclusion value. Furthermore, RASSF1A methylation using bronchial washings and bronchial aspirates showed a high AUC of 0.998 and 0.93, respectively, indicating excellent diagnostic performance. CONCLUSIONS: The methylation of RASSF1A in bronchial aspirates demonstrated a high level of diagnostic accuracy and has the potential to be a valuable supplementary diagnostic method, especially for identifying small cell lung cancer.

Fermented Astragalus Powder, a New Potential Feed Additive for Broilers to Improve the Growth Performance and Health.

A total of 320 1-day-old broilers were randomly divided into five groups. The control group (CON) received a basal diet, while the FAP4, FAP2, and FAP1 groups were provided with the basal diet supplemented with 4%, 2%, and 1% fermented Astragalus powder, respectively. The unfermented Astragalus powder (UAP2) group was fed the basal diet supplemented with 2% UAP. Each group contained eight replicates of eight chicks each. The results revealed that the final BW and ADG in the FAP 1 and FAP2 were higher than those in the UAP2 and CON groups, while reducing F/G from day 14 to day 42. On day 42, the thymus index in the UAP and FAP groups as well as the bursa index in the FAP4 group showed significant increases compared to those in the CON group. Supplementation with 2% FAP elevated serum IgA levels in broilers on day 28 and day 42, and it also increased serum IgG levels on day 42. Furthermore, supplementation with 2% FAP elevated serum albumin (ALB) levels in broilers, while supplementation with 4% FAP increased serum (glucose) GLU levels in broilers on day 28. The serum biochemical parameters and pathological observation of the liver and kidney in the groups did not show any adverse effects on broilers' health. In addition, the serum total antioxidant capacity (T-AOC) level significantly increased in the FAP4 and FAP2 groups on day 28, and the malondialdehyde (MDA) level in both serum and liver tissue decreased in the FAP2 group on day 28 and day 42. Compared to the CON group, 2% FAP and 2% UAP supplementation reduced the relative abundance of Bacteroides and supplementation with 2% FAP increased the relative abundance of Alistipes on day 42. In conclusion, the dietary supplementation of FAP can enhance the growth performance, immune function, and antioxidant capacity and regulate microflora in broilers, of which 2% FAP is more effective. It indicates FAP exhibits significant application potential as a promising feed additive for broilers.

Tip-Enhanced Sub-Femtomolar Steroid Immunosensing via Micropyramidal Flexible Conducting Polymer Electrodes for At-Home Monitoring of Salivary Sex Hormones.

Noninvasive testing and continuous monitoring of ultralow-concentration hormones in biofluids have attracted increasing interest for health management and personalized medicine, in which saliva could fulfill the demand. Steroid sex hormones such as progesterone (P4) and ß-estradiol (E2) are crucial for female wellness and reproduction; however, their concentrations in saliva can vary down to sub-pM and constantly fluctuate over several orders of magnitude. This remains a major obstacle toward user-friendly and reliable monitoring at home with low-cost flexible biosensors. Herein we introduce a 3D micropyramidal electrode architecture to address such challenges and achieve an ultrasensitive flexible electrochemical immunosensor with sub-fM-level detection capability of salivary sex hormones within a few minutes. This is enabled by micropyramidal electrode arrays consisting of a poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) thin film as the coating layer and electrochemically decorated gold nanoparticles (AuNPs) to improve the antibody immobilization. The enhanced mass transport around the 3D tips provided by the micropyramidal architecture is discovered to improve the detection limit by 3 orders of magnitude, pushing it to as low as ∼100 aM for P4 and ∼20 aM for E2, along with a wide linear range up to µM. Accordingly, these hormones down to sub-fM in >1000-fold-diluted saliva samples can be accurately measured by the printed soft immunosensors, thus allowing at-home testing through simple saliva dilution to minimize the interfering substances instead of centrifugation. Finally, monitoring of the female ovarian hormone cycle of both P4 and E2 is successfully demonstrated based on the centrifuge-free saliva testing during a period of 4 weeks. This ultrasensitive and soft 3D microarchitected electrode design is believed to provide a universal platform for a diverse variety of applications spanning from accurate clinical diagnostics and counselling and in vivo detection of bioactive species to environmental and food quality tracing.

APP/PS1 Gene-Environmental Cadmium Interaction Aggravates the Progression of Alzheimer's Disease in Mice via the Blood-Brain Barrier, Amyloid-ß, and Inflammation.

BACKGROUND: There is limited information about gene-environment interaction on the occurrence and the progression of Alzheimer's disease. OBJECTIVE: To explore the effect of environmental low-dose cadmium (Cd) exposure on the progress of Alzheimer's disease and the underlining mechanism. METHODS: We administered 1 mg/L, 10 mg/L cadmium chloride (treated groups), and water (control group) to C57BL/6J and APP/PS1 mice through drinking water, from one week before mating, until the offspring were sacrificed at 6 months of age. The behaviors, Cd level, blood-brain barrier (BBB) leakage, Aß1-42 deposition, and inflammation expression were evaluated in these mice. RESULTS: Mice of both genotypes had similar blood Cd levels after exposure to the same dose of Cd. The toxic effects of Cd on the two genotypes differed little in terms of neuronal histomorphology and BBB permeability. Cd caused a series of pathological morphological changes in the mouse brains and more fluorescent dye leakage at higher doses. Furthermore, the APP/PS1 mice had more severe damage than the C57BL/6J mice, based on the following five criteria. They were increasing anxiety-like behavior and chaos movement, spatial reference memory damage, Aß plaque deposition in mouse brains, increasing microglia expression in the brain, and IL-6 higher expression in the cortex and in the serum. CONCLUSION: Low-dose Cd exposure for 6 months increases Aß plaque deposition and BBB permeability, exacerbates inflammatory responses, and activates microglia, in APP/PS1 mice. APP/PS1 gene-environmental Cd interaction aggravates the progression of Alzheimer's disease in mice.

Development of a large-field streak tube for underwater imaging lidar.

Streak tube imaging lidar (STIL) can obtain 4-D images of a target, and its performance is mainly determined by the streak tube sensor. To obtain a large field of view, we developed a streak tube with a photocathode length as large as 35.3 mm, which is larger than the commonly used ST-HDR (30 mm). At the same time, the temporal resolution and dynamic spatial resolution are 60 ps and 12 lp/mm, which are very suitable to obtain accurate target coordinates for 4-D imaging. In addition, the streak tube has a high detection sensitivity of 46 mA/W at 500 nm and, hence, prospects in remote imaging. To test the performance of the streak tube, an underwater STIL experiment was conducted. Echo signal processing was performed by means of a bandpass filter and a matched filter, and then the peak detection algorithm was used to reconstruct the image. The results indicate that a spatial resolution better than 9 mm is achieved in the limpid water with a depth of 20 m, and a range accuracy of 1 cm is achieved in the turbid water with a depth of 10 m. Such a performance suggests that the large-field streak tube is of great potential for underwater target imaging and other remote imaging applications.

High-Transconductance, Highly Elastic, Durable and Recyclable All-Polymer Electrochemical Transistors with 3D Micro-Engineered Interfaces.

Organic electrochemical transistors (OECTs) have emerged as versatile platforms for broad applications spanning from flexible and wearable integrated circuits to biomedical monitoring to neuromorphic computing. A variety of materials and tailored micro/nanostructures have recently been developed to realized stretchable OECTs, however, a solid-state OECT with high elasticity has not been demonstrated to date. Herein, we present a general platform developed for the facile generation of highly elastic all-polymer OECTs with high transconductance (up to 12.7 mS), long-term mechanical and environmental durability, and sustainability. Rapid prototyping of these devices was achieved simply by transfer printing lithium bis(trifluoromethane)sulfonimide doped poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS/LiTFSI) microstructures onto a resilient gelatin-based gel electrolyte, in which both depletion-mode and enhancement-mode OECTs were produced using various active channels. Remarkably, the elaborate 3D architectures of the PEDOT:PSS were engineered, and an imprinted 3D-microstructured channel/electrolyte interface combined with wrinkled electrodes provided performance that was retained (> 70%) through biaxial stretching of 100% strain and after 1000 repeated cycles of 80% strain. Furthermore, the anti-drying and degradable gelatin and the self-crosslinked PEDOT:PSS/LiTFSI jointly enabled stability during > 4 months of storage and on-demand disposal and recycling. This work thus represents a straightforward approach towards high-performance stretchable organic electronics for wearable/implantable/neuromorphic/sustainable applications.

Reversibly Stretchable Organohydrogel-Based Soft Electronics with Robust and Redox-Active Interfaces Enabled by Polyphenol-Incorporated Double Networks.

Hydrogel electrolytes as soft ionic conductors have been extensively exploited to establish skinlike and biocompatible devices. However, in many common hydrogels, there exists irreversible elongation upon prolonged stretching cycles and poor interfacial contact, which have significantly hindered their practical applications where long-term operation at large deformations is needed. Herein, multifunctional soft electronic devices with reversible stretchability and improved electrode/electrolyte interfaces are demonstrated by employing polyacrylamide-based double-network organohydrogel electrolytes soaked with a high content of tannic acid (TA) that affords multiple noncovalent interactions and redox activity. Performances of the TA-rich gels are evaluated for the first time in realizing shape-recoverable stretchable devices against repeated deformations to 500% strain, with superior gel-electrode interfaces exhibiting both intimate adhesion and boosted electrochemical capacitance of >200 mF·cm-2. A maximal 4-fold higher capacitance can be achieved by introducing TA and ethylene glycol (EG) into hydrogels. Moreover, a soft electronic system consisting of stretchable supercapacitors and gel-based microsensors was demonstrated, in which the electronic performance of these devices can be well preserved after >1000 repeated cycles at strains of up to 200%, without obvious residual strain or electrode delamination. This could pave a route to the design of multifunctional gel networks tackling both the mechanical and interfacial issues in soft and biocompatible devices.

Sub-chronic low-dose arsenic in rice exposure induces gut microbiome perturbations in mice.

Long-term consumption of arsenic-contaminated rice has become a public health issue that urgently needs to be addressed. In this study, mice were exposed to arsenic in rice (low dose, 0.91 mg/kg; medium dose, 9.1 mg/kg) for 30 days and 60 days, respectively, and the effects on pathological structures of spleen and skin, as well as the structure of the fecal microbiome were examined. The findings revealed dose/time cumulative effects on pathological changes, with even a low dose exposure for 30 days causing destruction of splenic follicular structure and thickening of dermal keratinized and epidermal layers. The Firmicutes/Bacteroidetes ratio in the community and the positive/negative ratio in network links were higher in arsenic groups, suggesting that arsenic resulted in a less healthy and unstable microbiome for the host. Thus lifetime consumption of arsenic in rice may have potential health effects on humans and must be carefully assessed to safeguard human health. Furthermore, in arsenic groups, arsenic-resistant bacteria or arsenic hazards remediation bacteria changed to be the dominant bacteria and acted as the core bacteria in the network modules. Some microbial arsenic transforming genes (arsC, arsR, arsA, ACR3, and aoxB) differed, indicating that the gut microbiome changed to withstand arsenic stress. Furthermore, Faecalibaculum, Lachnospiraceae_NK4A136_group, Angelakisella, Ruminiclostridium, and Desulfovibrionaceae are positively associated with arsenic dosage and may be useful in the early detection of arsenicals.

Stretchable, Healable, and Degradable Soft Ionic Microdevices Based on Multifunctional Soaking-Toughened Dual-Dynamic-Network Organohydrogel Electrolytes.

Electronic materials and devices that can mimic biological systems featured with elasticity, toughness, self-healing, degradability, and environmental friendliness drive the technological developments in fields spanning from bioelectronics, biomedical diagnosis and therapy, electronic skin, and soft robotics to Internet-of-Things with "green" electronics. Among them, ionic devices based on gel electrolytes have emerged as attractive candidates for biomimetic systems. Herein, we presented a straightforward approach to demonstrate soft ionic microdevices based on a versatile organohydrogel platform acting as both a free-standing, stretchable, adhesive, healable, and entirely degradable support and a highly conductive, dehydration- and freezing-tolerant electrolyte. This is achieved by forming a gelatin/ferric-ion-cross-linked polyacrylic acid (GEL/PAA) dual dynamic supramolecular network followed by soaking into a NaCl glycerol/water solution to further toughen the gelatin network via solvent displacement, thus obtaining a high toughness of 1.34 MJ·cm-3 and a high ionic conductivity (>7 mS·cm-1). Highly stretchable and multifunctional ionic microdevices are then fabricated based on the organohydrogel electrolytes by simple transfer printing of carbon-based microelectrodes onto the prestretched gel surface. Proof-of-concept microdevices including resistive strain sensors and microsupercapacitors are demonstrated, which displayed outstanding stretchability to 300% strain, resistance to dehydration for >6 months, autonomous self-healing, and rapid room-temperature degradation within hours. The present material design and fabrication approach for the organohydrogel-based ionic microdevices will provide promising scope for life-like and sustainable electronic systems.

Magnetic-, Acoustic-, and Optical-Triple-Responsive Microbubbles for Magnetic Hyperthermia and Pothotothermal Combination Cancer Therapy.

The precision delivery of anti-cancer agents which aim for targeted and deep-penetrated delivery as well as a controlled release at the tumor site has been challenged. Here, we fabricate iron oxide nanoparticle shelled microbubbles (NSMs) through self-assembly, synergizing magnetic, acoustic, and optical responsiveness in one nanotherapeutic platform. Iron oxide nanoparticles serve as both magnetic and photothermal agents. Once intravenously injected, NSMs can be magnetically guided to the tumor site. Ultrasound triggers the release of iron oxide nanoparticles, facilitating the penetration of nanoparticles deep into the tumor due to the cavitation effect of microbubbles. Thereafter, magnetic hyperthermia and photothermal therapy can be performed on the tumor for combinational cancer therapy, a solution for cancer resistance due to the tumor heterogeneity. In this protocol, the synthesis and characterization of NSMs including structural, chemical, magnetic and acoustic properties were performed. In addition, the anti-cancer efficacy by thermal therapy was investigated using in vitro cell cultures. The proposed delivery strategy and combination therapy holds great promise in cancer treatment to improve both delivery and anticancer efficacies.

Highly sensitive resonant sensor using quartz resonator cluster for inclination measurement.

Quartz crystal resonators are suitable for digital output sensors due to their sensitivity to force. This paper presents a highly sensitive inclinometer sensor with a quartz resonator cluster. The force sensitive resonator cluster is designed on the quartz substrate to eliminate common-mode disturbances, such as temperature, as well as to improve sensitivity to force. The inclinometer sensor comprises two quartz resonator clusters that form a push-pull structure. The difference in inclination causes gravitational acceleration to produce an axial force along the input axis, with the resonance frequency shifting in proportion to the axial force. A signal processing and fusion scheme for the inclinometer sensor is presented and then tested. The results show that the scale factor of the sensor prototype is 3.5102 Hz/1' and that nonlinearity is 1.040% full scale in the range of -2°-+2°. The resolution of the inclinometer sensor is better than 0.0055°, making these devices a potentially attractive option for numerous precision inclination measurement applications.

Perfluorooctane sulfonate enhances mRNA expression of PPARγ and ap2 in human mesenchymal stem cells monitored by long-retained intracellular nanosensor.

Perfluorooctane sulfonate (PFOS) has been widely used as a surface coating for household products. It still exists in living environments despite being restricted, due to its bioaccumulation and long half-life. Studies have shown that PFOS has the ability to induce adipogenic differentiation of human cells. Human mesenchymal stem cells (hMSCs) distributed within the adipose tissue might be a potential target of accumulated PFOS. However, traditional end-point toxicity assays failed to examine the subtle changes of cellular function exposed to low-dose persistent organic pollutants in real time. In the present work, highly sensitive and long-retained (more than 30 days) fluorescence based polymeric nanosensors were developed and employed for real-time assessment of cellular functions. hMSCs were engineered with sensor molecules encapsulated poly (lactic-co-glycolic acid) (PLGA) particles. Once internalized by hMSCs, PLGA particles continuously release and replenish sensor molecules to cytoplasm, resulting in prolonged fluorescence signal against photo bleaching and dilution by exocytosis. With this method, the dynamic changes of viability, ROS induction, and adipogenic differentiation related mRNA expression of hMSCs were monitored. PFOS with the concentration as low as 0.1 µM can induce cellular ROS and enhance the PPARγ and ap2 mRNA expression, suggesting the effect on promoting adipogenic differentiation of hMSCs.

Arsenic concentrations, diversity and co-occurrence patterns of bacterial and fungal communities in the feces of mice under sub-chronic arsenic exposure through food.

BACKGROUND: Arsenic, a global pollutant and a threshold-free primary carcinogen, can accumulate in rice. Previous studies have focused on arsenic poisoning in drinking water and the effects on gut microbes. The research on arseniasis through food, which involves the bio-transformation of arsenic, and the related changes in gut microbiome is insufficient. METHOD: Mice were exposed from animal feed prepared with four arsenic species (iAsIII, iAsV, MMA, and DMA) at a dose of 30 mg/kg according to the arsenic species proportion in rice for 30 days and 60 days. The levels of total arsenic (tAs) and arsenic species in mice feces and urine samples were determined using ICP-MS and HPLC-ICP-MS, respectively. 16S rRNA and ITS gene sequencing were conducted on microbial DNA extracted from the feces samples. RESULTS: At 30 days and 60 days exposure, the tAs levels excreted from urine were 0.0092 and 0.0093 mg/day, and tAs levels in feces were 0.0441 and 0.0409 mg/day, respectively. We found significant differences in arsenic species distribution in urine and feces (p < 0.05). In urine, the predominant arsenic species were iAsIII (23% and 14%, respectively), DMA (55% and 70%, respectively), and uAs (unknown arsenic, 14% and 10%, respectively). In feces, the proportion of major arsenic species (iAsV, 26% and 21%; iAsIII, 16% and 15%; MMA, 14% and 14%; DMA, 19% and 19%; and uAs, 22% and 29%, respectively) were evenly distributed. Microbiological analysis (MRPP test, α- and ß-diversities) showed that diversity of gut bacteria was significantly related to arsenic exposure through food, but diversity of gut fungi is less affected. Manhattan plot and LEfSe analysis showed that arsenic exposure significantly changes microbial taxa, which might be directly associated with arsenic metabolism and diseases mediated by arsenic exposure, such as Deltaproteobacteria, Polynucleobacter, Saccharomyces, Candida, Amanitaceae, and Fusarium. Network analysis was used to identify the changing hub taxa in feces along with arsenic exposure. Function predicting analysis indicated that arsenic exposure might also significantly increase differential metabolic pathways and would disturb carbohydrates, lipid, and amino acids metabolism of gut bacteria. CONCLUSIONS: The results demonstrate that subchronic arsenic exposure via food significantly changes the gut microbiome, and the toxicity of arsenic in food, especially in staples, should be comprehensively evaluated in terms of the disturbance of microbiome, and feces might be the main pathway through which arsenic from food exposure is excreted and bio-transformed, providing a new insight into the investigation of bio-detoxification for arseniasis.

Diversity and Co-Occurrence Patterns of Soil Bacterial and Fungal Communities of Chinese Cordyceps Habitats at Shergyla Mountain, Tibet: Implications for the Occurrence.

Chinese Cordyceps is a well-known medicinal larva-fungus symbiote distributed in the Qinghai-Tibetan Plateau and adjacent areas. Previous studies have involved its artificial cultivation but commercial cultivation is difficult to perform because the crucial factors triggering the occurrence of Chinese Cordyceps are not quite clear. The occurrence of Chinese Cordyceps is greatly affected by the soil environment, including the soil's physicochemical and microecological properties. In this study, the effects of these soil properties on the occurrence of Chinese Cordyceps were investigated. The results show that the physicochemical properties, including easily oxidizable organic carbon (EOC), soil organic carbon (SOC), humic acid carbon (HAC), humin carbon (HMC), and pH, might be negatively related to the occurrence of Chinese Cordyceps, and soil water content (SWC) might be positively related. Several soil physicochemical parameters (pH, SOC, HMC, HAC, available potassium (APO), available phosphorus (APH), microbial biomass carbon (MBC), and the ratio of NH4+ to NO3- (NH4+/NO3-)) and microbial properties interact and mix together, which might affect the occurrence of Chinese Cordyceps. Soil microbial community structure was also a possible factor, and a low level of bacterial and fungal diversity was suitable for the occurrence of Chinese Cordyceps. The intra-kingdom network revealed that a closer correlation of the bacterial community might help the occurrence of Chinese Cordyceps, while a closer correlation of the fungal community might suppress it. The inter-kingdom network revealed that the occurrence rate of Chinese Cordyceps might be negatively correlated with the stability of the correlation state of the soil habitat. In conclusion, this study shows that soil physicochemical properties and microbial communities could be greatly related with the occurrence of Chinese Cordyceps. In addition, soil physicochemical properties, the level of bacterial and fungal diversity, and correlations of bacterial and fungal communities should be controlled to a certain level to increase the production of Chinese Cordyceps in artificial cultivation.

Skin-Inspired Surface-Microstructured Tough Hydrogel Electrolytes for Stretchable Supercapacitors.

Double-network tough hydrogels have raised increasing interest in stretchable electronic applications as well as electronic skin (e-skin) owing to their excellent mechanical properties and functionalities. While hydrogels have been extensively explored as solid-state electrolytes, stretchable energy storage devices based on tough hydrogel electrolytes are still limited despite their high stretchability and strength. A key challenge remains in the robust electrode/electrolyte interface under large mechanical strains. Inspired by the skin structure that involves the microstructured interface for the tight connection between the dermis and epidermis, we demonstrated that a surface-microstructured tough hydrogel electrolyte composed of agar/polyacrylamide/LiCl (AG/PAAm/LiCl) could be exploited to allow stretchable supercapacitors with enhanced mechanical and electrochemical performance. The prestretched tough hydrogel electrolyte was treated to generate surface microstructures with a roughness of tens of micrometers simply via mechanical rubbing followed by the attachment of activated carbon electrodes on both sides to realize the fabrication of the stretchable supercapacitor. Through investigating the properties of the tough hydrogel electrolyte and the electrochemical performance of the as-fabricated supercapacitors under varied strains, the surface-microstructured hydrogel electrolyte was shown to enable robust adhesion to electrodes, improving electrochemical behavior and capacitance, as well as having better performance retention under repeated stretching cycles, which surpassed the pristine hydrogel with smooth surfaces. Our approach could provide an alternative and general strategy to improve the interfacial properties between the electrode and the hydrogel electrolyte, driving new directions for functional stretchable devices based on tough hydrogels.

[Synthesis and Study on Adsorption Property of Congo Red Molecularly Imprinted Polymer Nanospheres].

Molecularly imprinted polymer nanospheres (MIP) were prepared with Congo red as the template, methacrylic acid (MAA) as a functional monomer, ethylene glycol dimethacrylate (EGDMA) as the cross linker, azodiisobutyronitrile (AIBN) as an initiator, and acetonitrile as the porogen by precipitation polymerization. The morphology of MIP was characterized by SEM and TEM which showed that the diameter of MIP was nanometer grade (90 nm) and the shape was homogeneous. The specific surface area and pore volumes of MIP and NIP were examined through Brunauer-Emett-Teller method of nitrogen adsorption experiments. Then, the adsorption and selective recognition ability of MIPs were evaluated using the equilibrium rebinding experiments. The results indicated that the prepared MIP showed a good selectivity recognition ability to its template. It concluded that MIP could be employed as an effective material for removing Congo red from waste water.

[Synthesis and adsorption property of Cd(II) - 8-hydroxyquinoline molecularly imprinted polymer microspheres].

Cd(II) ion could form a stable complex with 8-hydroxyquinoline (molar rate = 1 : 1) in ethanol solution as revealed by ultraviolet spectrum analysis. Based on this molar rate of Cd(II) ions and 8-hydroxyquinoline, Cd(II) ions imprinting polymer microspheres were synthesized by water-in-oil-in-water (W/O/W) emulsions polymerization, using metal Cd(II) ions as template, 8-hydroxyquinoline as ligand, methacrylic acid as functional monomer, ethylene acrylic acid methyl ester as cross-linker, and azodiisobutyronitrile as initiator in aqueous phase. The influences of the dosage of emulsifier, porogen and outer aqueous phase on the morphology and adsorption property of MIP were studied. The morphology of MIP was characterized by SEM which showed that the diameter of MIP was of micrometer grade and the shape was homogeneous under some operating conditions. The adsorption properties of MIP synthesized under different conditions were compared. The influences of solution pH, adsorption time, initial concentration and temperature on MIP adsorbed Cd(II) ions were assessed. The results showed that MIP showed fast kinetics for adsorption and desorption of Cd(II) ions. It was concluded that MIP could be employed as an effective material for the selective removal of Cd(II) ions from waste water.

A novel chemiluminescence system with diperiodatonickelate (IV) for the determination of adrenaline.

A novel chemiluminescence (CL) system with diperiodatonickelate (IV) (DPN) was developed for the determination of adrenaline for the first time. The possible CL emission mechanism was briefly discussed by comparing the fluorescence emission spectra with CL spectra. Under the optimum conditions, the relative CL intensity was linear over the concentration of AD ranging from 1.0×10(-7) to 1.0×10(-5) g mL(-1) with a detection limit of 4.0×10(-8) g mL(-1) (3σ). And the relative standard deviation was 3.7% for 2.0×10(-6) g mL(-1) AD (n=11). The developed method has been successfully applied to the determination of AD in pharmaceutical preparations.