CdSe nanoplatelets (NPLs) are promising 2D semiconductors for optoelectronic applications, in which efficient charge transport properties are desirable. It is reported that thermal annealing constitutes an effective strategy to control the optical absorption and electrical properties of CdSe NPLs by tuning the inter-NPL distance. Combining optical absorption, transmission electron microscopy, and thermogravimetric analysis, it is revealed that the thermal decomposition of ligands (e.g., cadmium myristate) governs the inter-NPL distance and thus the inter-NPL electronic coupling strength. Employing ultrafast terahertz spectroscopy, it is shown that this enhanced electronic coupling increases both the free carrier generation efficiency and the short-range mobility in NPL solids. The results show a straightforward method of controlling the interfacial electronic coupling strength for developing functional optoelectronic devices through thermal treatments.
Two-dimensional conjugated metal-organic frameworks (2D c-MOFs) are emerging as a unique subclass of layer-stacked crystalline coordination polymers that simultaneously possess porous and conductive properties, and have broad application potential in energy and electronic devices. However, to make the best use of the intrinsic electronic properties and structural features of 2D c-MOFs, the controlled synthesis of hierarchically nanostructured 2D c-MOFs with high crystallinity and customized morphologies is essential, which remains a great challenge. Herein, we present a template strategy to synthesize a library of 2D c-MOFs with controlled morphologies and dimensions via insulating MOFs-to-c-MOFs transformations. The resultant hierarchically nanostructured 2D c-MOFs feature intrinsic electrical conductivity and higher surface areas than the reported bulk-type 2D c-MOFs, which are beneficial for improved access to active sites and enhanced mass transport. As proof-of-concept applications, the hierarchically nanostructured 2D c-MOFs exhibit a superior performance for electrical properties related applications (hollow Cu-BHT nanocubes-based supercapacitor and Cu-HHB nanoflowers-based chemiresistive gas sensor), achieving over 225 % and 250 % improvement in specific capacity and response intensity over the corresponding bulk type c-MOFs, respectively.
Dual-atom catalysts (DACs) have arisen as a novel type of heterogeneous catalyst that extends from single-atom catalysts (SACs) by incorporating two kinds of metals. These materials have demonstrated enhanced performance when compared to SACs. The choice of metal precursors plays an important role in the synthesis of DACs. Here, we choose Fe and Co as DAC models and study types, contents, molar ratios of two precursors, and oxygen reduction reaction (ORR) activity. The Fe,Co DACs were synthesized by an adsorption-annealing approach, using nitrogen-doped graphitic carbon (NC) as the support. As a result, the adsorption ability of metal precursors on the support determines the metal loadings in Fe and Co DACs, leading to differences in ORR performance. The Fe precursors win the adsorption competitions in most cases, resulting in a much higher loading than that of Co precursors. Importantly, it is difficult to increase the precursor content by simply increasing the initial amount. Choosing the right combination of metal precursors, such as ferrocene and cobalt chloride, can yield Fe,Co DACs with enhanced ORR performance..
A general approach to promote IR light-driven CO2 reduction within ultrathin Cu-based hydrotalcite-like hydroxy salts is presented. Associated band structures and optical properties of the Cu-based materials are first predicted by theory. Subsequently, Cu4(SO4)(OH)6 nanosheets were synthesized and are found to undergo cascaded electron transfer processes based on d-d orbital transitions under infrared light irradiation. The obtained samples exhibit excellent activity for IR light-driven CO2 reduction, with a production rate of 21.95 and 4.11 µmol g-1 h-1 for CO and CH4, respectively, surpassing most reported catalysts under the same reaction conditions. X-ray absorption spectroscopy and in situ Fourier-transform infrared spectroscopy are used to track the evolution of the catalytic sites and intermediates to understand the photocatalytic mechanism. Similar ultrathin catalysts are also investigated to explore the generality of the proposed electron transfer approach. Our findings illustrate that abundant transition metal complexes hold great promise for IR light-responsive photocatalysis.
Coordination Complexes , Electric Stimulation Therapy , Female , Pregnancy , Humans , Carbon Dioxide , Parity , Electron Transport
Two-dimensional conjugated polymers (2DCPs), composed of multiple strands of linear conjugated polymers with extended in-plane π-conjugation, are emerging crystalline semiconducting polymers for organic (opto)electronics. They are represented by two-dimensional π-conjugated covalent organic frameworks, which typically suffer from poor π-conjugation and thus low charge carrier mobilities. Here we overcome this limitation by demonstrating two semiconducting phthalocyanine-based poly(benzimidazobenzophenanthroline)-ladder-type 2DCPs (2DCP-MPc, with M = Cu or Ni), which are constructed from octaaminophthalocyaninato metal(II) and naphthalenetetracarboxylic dianhydride by polycondensation under solvothermal conditions. The 2DCP-MPcs exhibit optical bandgaps of ~1.3 eV with highly delocalized π-electrons. Density functional theory calculations unveil strongly dispersive energy bands with small electron-hole reduced effective masses of ~0.15m0 for the layer-stacked 2DCP-MPcs. Terahertz spectroscopy reveals the band transport of Drude-type free carriers in 2DCP-MPcs with exceptionally high sum mobility of electrons and holes of ~970 cm2 V-1 s-1 at room temperature, surpassing that of the reported linear conjugated polymers and 2DCPs. This work highlights the critical role of effective conjugation in enhancing the charge transport properties of 2DCPs and the great potential of high-mobility 2DCPs for future (opto)electronics.
Metal-Organic Frameworks , Polymers , Electronics , Electrons , Indoles
Emerging rechargeable aluminium batteries (RABs) offer a sustainable option for next-generation energy storage technologies with low cost and exemplary safety. However, the development of RABs is restricted by the limited availability of high-performance cathode materials. Herein, we report two polyimide two-dimensional covalent organic frameworks (2D-COFs) cathodes with redox-bipolar capability in RAB. The optimal 2D-COF electrode achieves a high specific capacity of 132â mAh g-1 . Notably, the electrode presents long-term cycling stability (with a negligible ≈0.0007 % capacity decay per cycle), outperforming early reported organic RAB cathodes. 2D-COFs integrate n-type imide and p-type triazine active centres into the periodic porous polymer skeleton. With multiple characterizations, we elucidate the unique Faradaic reaction of the 2D-COF electrode, which involves AlCl2+ and AlCl4 - dual-ions as charge carriers. This work paves the avenue toward novel organic cathodes in RABs.
Iron-nitrogen-carbon (FeNC) materials have emerged as a promising alternative to platinum-group metals for catalyzing the oxygen reduction reaction (ORR) in proton-exchange-membrane fuel cells. However, their low intrinsic activity and stability are major impediments. Herein, an FeN-C electrocatalyst with dense FeN4 sites on hierarchically porous carbons with highly curved surfaces (denoted as FeN4 -hcC) is reported. The FeN4 -hcC catalyst displays exceptional ORR activity in acidic media, with a high half-wave potential of 0.85 V (versus reversible hydrogen electrode) in 0.5 m H2 SO4 . When integrated into a membrane electrode assembly, the corresponding cathode displays a high maximum peak power density of 0.592 W cm-2 and demonstrates operating durability over 30 000 cycles under harsh H2 /air conditions, outperforming previously reported Fe-NC electrocatalysts. These experimental and theoretical studies suggest that the curved carbon support fine-tunes the local coordination environment, lowers the energies of the Fe d-band centers, and inhibits the adsorption of oxygenated species, which can enhance the ORR activity and stability. This work provides new insight into the carbon nanostructure-activity correlation for ORR catalysis. It also offers a new approach to designing advanced single-metal-site catalysts for energy-conversion applications.
The liver is the hub of human metabolism and involves many diseases. To better work on the mechanism and treatment of liver diseases, it is of particular interest to design 3-dimensional scaffolds suitable for culturing hepatocytes in vitro to simulate their metabolic and regenerative abilities. In this study, sulfated bacterial cellulose (SBC) was prepared as the building block of cell scaffolds, motivated by the anionic nature and 3-dimensional structure of hepatic extracellular matrix, and its reaction condition for sulfate esterification was optimized by changing the reaction time. The analysis and study of the microscopic morphology, structure, and cytocompatibility of SBCs showed that they possess good biocompatibility and meet the requirements for tissue engineering. Next, SBC was mixed with gelatin for composite scaffolds (SBC/Gel) for culturing hepatocytes by homogenization and freeze-drying methods, whose physical properties such as pore size, porosity, and compression properties were compared with gelatin (Gel) scaffolds as the control group, and the cytological activity and hemocompatibility of the composite scaffolds were investigated. The results showed that the SBC/Gel composite has better porosity and compression properties, as well as good cytocompatibility and hemocompatibility, and could be applied to 3-dimensional culture of hepatocytes for drug screening or liver tissue engineering.
Although two-dimensional conjugated metal-organic frameworks (2D c-MOFs) provide an ideal platform for precise tailoring of capacitive electrode materials, high-capacitance 2D c-MOFs for non-aqueous supercapacitors remain to be further explored. Herein, we report a novel phthalocyanine-based nickel-bis(dithiolene) (NiS4)-linked 2D c-MOF (denoted as Ni2[CuPcS8]) with outstanding pseudocapacitive properties in 1 M TEABF4/acetonitrile. Each NiS4 linkage is disclosed to reversibly accommodate two electrons, conferring the Ni2[CuPcS8] electrode a two-step Faradic reaction with a record-high specific capacitance among the reported 2D c-MOFs in non-aqueous electrolytes (312 F g-1) and remarkable cycling stability (93.5% after 10,000 cycles). Multiple analyses unveil that the unique electron-storage capability of Ni2[CuPcS8] originates from its localized lowest unoccupied molecular orbital (LUMO) over the nickel-bis(dithiolene) linkage, which allows the efficient delocalization of the injected electrons throughout the conjugated linkage units without inducing apparent bonding stress. The Ni2[CuPcS8] anode is used to demonstrate an asymmetric supercapacitor device that delivers a high operating voltage of 2.3 V, a maximum energy density of 57.4 Wh kg-1, and ultralong stability over 5000 cycles.
Nitrogen-doped graphitic carbon materials hosting single-atom iron (Fe-N-C) are major non-precious metal catalysts for the oxygen reduction reaction (ORR). The nitrogen-coordinated Fe sites are described as the first coordination sphere. As opposed to the good performance in ORR, that in the oxygen evolution reaction (OER) is extremely poor due to the sluggish O-O coupling process, thus hampering the practical applications of rechargeable zinc (Zn)-air batteries. Herein, we succeed in boosting the OER activity of Fe-N-C by additionally incorporating phosphorus atoms into the second coordination sphere, here denoted as P/Fe-N-C. The resulting material exhibits excellent OER activity in 0.1 M KOH with an overpotential as low as 304 mV at a current density of 10 mA cm-2. Even more importantly, they exhibit a remarkably small ORR/OER potential gap of 0.63 V. Theoretical calculations using first-principles density functional theory suggest that the phosphorus enhances the electrocatalytic activity by balancing the *OOH/*O adsorption at the FeN4 sites. When used as an air cathode in a rechargeable Zn-air battery, P/Fe-N-C delivers a charge-discharge performance with a high peak power density of 269 mW cm-2, highlighting its role as the state-of-the-art bifunctional oxygen electrocatalyst.
Pressure, analogous with temperature and composition, is other meaningful variant for tuning the structure-activity properties of layered materials. In-situ high-pressure electrical results discover that Vanadium based MXene (V2CTx MXene) conductivity is increased by one order of magnitude from ambient to 10.4 GPa, and then the conductivity is still fixated on meeting growth as pressure releasing. Increased carrier concentration due to denser compactness is the most important factor in improving sample conductivity. Furthermore, abundant of V2CTx samples after preloading different pressures are prepared by the mean of the double-anvil hydraulic press for the first time, and results of increased conductivity were reproduced at ambient conditions. The first-principles calculation of V2C (non-functional group), V2CF, V2CO, and V2COH explains for the lattice expansion by tracing emotion of different function groups upon decompression. Electrochemical results obtain that once forming V2CTx MXene anode rapidly quenched from 2.0 GPa in hydraulic press shows better performance, obviously weakening electric polarization and increasing Li-ion transport rate due to its proper interlaminar densification and improved conductivity. This work opens up a new, simple, and universal approach to develop MXene materials with superior electrical and electrochemical properties, as well as expanding the potential applications for energy storage.
Fe-N-C electrocatalysts, comprising FeN4 single atom sites immobilized on N-doped carbon supports, offer excellent activity in the oxygen reduction reaction (ORR), especially in alkaline solution. Herein, we report a simple synthetic strategy for improving the accessibility of FeN4 sites during ORR and simultaneously fine-tuning the microenvironment of FeN4 sites, thus enhancing the ORR activity. Our approach involved a simple one-step pyrolysis of a Fe-containing zeolitic imidazolate framework in the presence of NaCl, yielding a hierarchically porous Fe-N-C electrocatalyst containing tailored FeN4 sites with slightly elongated Fe-N bond distances and reduced Fe charge. The porous carbon structure improved mass transport during ORR, whilst the microenvironment optimized FeN4 sites benefitted the adsorption/desorption of ORR intermediates. Accordingly, the developed electrocatalyst, possessing a high FeN4 site density (9.9 × 1019 sites g-1) and turnover frequency (2.26 s-1), delivered remarkable ORR performance with a low overpotential (a half-wave potential of 0.90 V vs. reversible hydrogen electrode) in 0.1 mol L-1 KOH.
The Cu2Ni0.05Zn0.95Sn(S,Se)4 (CNZTSSe) films were synthesized by sol-gel combined with selenidation treatment. To further enhance the crystal quality of the film, the selenidation conditions were optimized, and the effects of selenidation time on the properties of the CNZTSSe films and devices were systematically studied. The results show that the crystallinity of the films increased remarkably with the increase of selenidation time. Under the optimum selenidation time of 15 min, smooth and dense films were obtained. Through the analysis of EDS results, it is found that Se occupies more S positions with the increase of selenidation time, which decreases the band gap of the film from 1.14 eV to 1.0 eV. In addition, the formation of Zn-related defects is effectively suppressed by Ni doping to enhance the open circuit voltage (Voc) of the CNZTSSe solar cells. When the selenidation time is 15 min, the CNZTSSe film has the highest carrier concentration of 1.68 × 1016 cm-3, and the best efficiency of the device prepared based on the film as the absorption layer is 5.0%, and the Voc is 337 mV.
We studied the structure-function relationship of compressed Ti3C2Tx MXene using high-pressure in situ synchrotron radiation, impedance spectroscopy, Hall effect measurements, and first-principles calculations. With increasing pressure, the conductivity of Ti3C2Tx MXene increases along with its continued lattice shrinkage. A pressure range of 0.4-2.2 GPa exhibits a sharp decrease in resistance, which decreases by more than one order of magnitude from 3.3 × 104 to 1.4 × 103 Ω. A pressure range of 2.2-6.6 GPa exhibits a steady resistance with a slight decrease of 0.2%. As the pressure drops to atmospheric conditions, the resistance increases slightly to 4.2 × 103 Ω. This is accompanied by a transformation of the semiconductor into metal. An irreversible increase in conductivity is observed owing to an increase in the electron concentration and a decrease in the grain-boundary potential barrier. Furthermore, abundant Ti3C2Tx undergoing prepressure treatments (0.4, 2.0, and 4.0 GPa) was first prepared using a double-anvil hydraulic press. The recycled samples retain an accordion-like layered structure with slight lattice shrinkage while the voids between the sheets contract considerably, increasing the density. Correspondingly, electrochemical results show a pressure threshold of 2.0 GPa based on the rapid quenching from the hydraulic press. This weakens the electric polarization in redox reactions and increases the ionic transport rate for the formation of a Ti3C2Tx anode owing to pressure improving the conductivity and interlaminar densification. Our study shows a new, simple, and universal way to regulate various MXenes and also promotes the application of MXene-based materials in energy storage and related fields.
The electrocatalytic splitting of water is recognized to be the most sustainable and clean technology for the production of hydrogen (H2 ). Unfortunately, the efficiency is seriously restricted by the sluggish kinetics of the oxygen evolution reaction (OER) at the anode. In contrast to the OER, the electrooxidation of organic compounds (EOO) is more thermodynamically and kinetically favorable. Thus, the coupling of the EOO and hydrogen evolution reaction (HER) has emerged as an alternative route, as it can greatly improve the catalytic efficiency for the production of H2 . Simultaneously, value-added organic compounds can be generated on the anode through electrooxidation upgrading. In this Minireview, we highlight the latest progress and milestones in coupling the EOO with the HER. Emphasis is focused on the design of the anode catalyst, understanding the reaction mechanism, and the construction of the electrolyzer. Moreover, challenges and prospects are offered relating to the future development of this emerging technology.
Ruthenium (Ru) has been theoretically considered a viable alkaline hydrogen evolution reaction electrocatalyst due to its fast water dissociation kinetics. However, its strong affinity to the adsorbed hydroxyl (OHad ) blocks the active sites, resulting in unsatisfactory performance during the practical HER process. Here, we first reported a competitive adsorption strategy for the construction of SnO2 nanoparticles doped with Ru single-atoms supported on carbon (Ru SAs-SnO2 /C) via atomic galvanic replacement. SnO2 was introduced to regulate the strong interaction between Ru and OHad by the competitive adsorption of OHad between Ru and SnO2 , which alleviated the poisoning of Ru sites. As a consequence, the Ru SAs-SnO2 /C exhibited a low overpotential at 10â mA cm-2 (10â mV) and a low Tafel slope of 25â mV dec-1 . This approach provides a new avenue to modulate the adsorption strength of active sites and intermediates, which paves the way for the development of highly active electrocatalysts.
The anode-free battery concept is proposed to pursue the aspiration of energy-dense, rechargeable metal batteries, but this has not been achieved with dual-ion batteries. Herein, the first anode-free Zn-graphite battery enabled by efficient Zn plating-stripping onto a silver-coated Cu substrate is demonstrated. The silver coating guides uniform Zn deposition without dendrite formation or side reaction over a wide range of electrolyte concentrations, enabling the construction of anode-free Zn cells. In addition, the graphite cathode operates efficiently under reversible bis(trifluoromethanesulfonyl)imide anion (TFSI- ) intercalation without anodic corrosion. An extra high-potential TFSI- intercalation plateau is recognized at 2.75 V, contributing to the high capacity of graphite cathode. Thanks to efficient Zn plating-stripping and TFSI- intercalation-deintercalation, an anode-free Zn-graphite dual-ion battery that exhibits impressive cycling stability with 82% capacity retention after 1000 cycles is constructed. At the same time, a specific energy of 79 Wh kg-1 based on the mass of cathode and electrolyte is achieved, which is over two times higher than conventional Zn-graphite batteries (<30 Wh kg-1 ).
OBJECTIVE: Recent observations in systemic juvenile idiopathic arthritis (JIA) suggest an increasing incidence of high-mortality interstitial lung disease often characterized by a variant of pulmonary alveolar proteinosis (PAP). Co-occurrence of macrophage activation syndrome (MAS) and PAP in systemic JIA suggests a shared pathology, but patients with lung disease associated with systemic JIA (designated SJIA-LD) also commonly experience features of drug reaction such as atypical rashes and eosinophilia. This study was undertaken to investigate immunopathology and identify biomarkers in systemic JIA, MAS, and SJIA-LD. METHODS: We used SOMAscan to measure ~1,300 analytes in sera from healthy controls and patients with systemic JIA, MAS, SJIA-LD, or other related diseases. We verified selected findings by enzyme-linked immunosorbent assay and lung immunostaining. Because the proteome of a sample may reflect multiple states (systemic JIA, MAS, or SJIA-LD), we used regression modeling to identify subsets of altered proteins associated with each state. We tested key findings in a validation cohort. RESULTS: Proteome alterations in active systemic JIA and MAS overlapped substantially, including known systemic JIA biomarkers such as serum amyloid A and S100A9, and novel elevations in the levels of heat-shock proteins and glycolytic enzymes. Interleukin-18 levels were elevated in all systemic JIA groups, particularly MAS and SJIA-LD. We also identified an MAS-independent SJIA-LD signature notable for elevated levels of intercellular adhesion molecule 5 (ICAM-5), matrix metalloproteinase 7 (MMP-7), and allergic/eosinophilic chemokines, which have been previously associated with lung damage. Immunohistochemistry localized ICAM-5 and MMP-7 in the lungs of patients with SJIA-LD. The ability of ICAM-5 to distinguish SJIA-LD from systemic JIA/MAS was independently validated. CONCLUSION: Serum proteins support a systemic JIA-to-MAS continuum; help distinguish systemic JIA, systemic JIA/MAS, and SJIA-LD; and suggest etiologic hypotheses. Select biomarkers, such as ICAM-5, could aid in early detection and management of SJIA-LD.
Arthritis, Juvenile , Lung Diseases , Macrophage Activation Syndrome , Arthritis, Juvenile/complications , Biomarkers , Humans , Lung Diseases/epidemiology , Matrix Metalloproteinase 7 , Proteome
A highly effective electrocatalyst is the central component of advanced electrochemical energy conversion. Recently, two-dimensional conjugated metal-organic frameworks (2D c-MOFs) have emerged as a class of promising electrocatalysts because of their advantages including 2D layered structure with high in-plane conjugation, intrinsic electrical conductivity, permanent pores, large surface area, chemical stability, and structural diversity. In this Review, we summarize the recent advances of 2D c-MOF electrocatalysts for electrochemical energy conversion. First, we introduce the chemical design principles and synthetic strategies of the reported 2D c-MOFs, as well as the functional design for the electrocatalysis. Subsequently, we present the representative 2D c-MOF electrocatalysts in various electrochemical reactions, such as hydrogen/oxygen evolution, and reduction reactions of oxygen, carbon dioxide, and nitrogen. We highlight the strategies for the structural design and property tuning of 2D c-MOF electrocatalysts to boost the catalytic performance, and we offer our perspectives in regard to the challenges to be overcome.
Arthritis, Juvenile , Lung Diseases , Macrophage Activation Syndrome , Still's Disease, Adult-Onset , Arthritis, Juvenile/complications , Arthritis, Juvenile/therapy , Humans , Lung Diseases/therapy , Macrophage Activation Syndrome/complications , Macrophage Activation Syndrome/therapy , Plasma Exchange/adverse effects , Still's Disease, Adult-Onset/complications
