RESUMEN
The process of mineralization fundamentally alters collagenous tissue biomechanics. While the structure and organization of mineral particles have been widely studied, the impact of mineralization on collagen matrix structure, particularly at the molecular scale, requires further investigation. In this study, synchrotron X-ray scattering (XRD) and polarization-resolved second harmonic generation microscopy (pSHG) were used to study normally mineralizing turkey leg tendon in tissue zones representing different stages of mineralization. XRD data demonstrated statistically significant differences in collagen D-period, intermolecular spacing, fibril and molecular dispersion and relative supramolecular twists between non-mineralizing, early mineralizing and late mineralizing zones. pSHG analysis of the same tendon zones showed the degree of collagen fibril organization was significantly greater in early and late mineralizing zones compared to non-mineralizing zones. The combination of XRD and pSHG data provide new insights into hierarchical collagen-mineral interactions, notably concerning possible cleavage of intra- or interfibrillar bonds, occlusion and reorganization of collagen by mineral with time. The complementary application of XRD and fast, label-free and non-destructive pSHG optical measurements presents a pathway for future investigations into the dynamics of molecular scale changes in collagen in the presence of increasing mineral deposition.
RESUMEN
The catalytic direct hydroarylation of alkynamides is a highly efficient approach for accessing functionalized trisubstituted arylalkenes with amide groups. Herein, we report a rhodium-catalyzed pyridylation of alkynamides with pyridylboronic acids, yielding diverse primary, secondary, and tertiary enamides in good to excellent yields (up to 94%). This reaction demonstrates broad tolerance towards various alkyl and aryl functional groups, providing convenient access to a diverse array of alkenylpyridine derivatives. To demonstrate potential applications in late-stage hydropyridylation, we synthesized α,ß-unsaturated ketones, aldehydes, and esters with high yields from the pyridylation product of Weinreb amides. This indirect expansion of the substrate scope enhances the practicality of this strategy. Additionally, the α,ß-unsaturated ketone obtained can be further reduced to yield a chiral alcohol with a 99% ee, further demonstrating the versatility and potential utility of this approach.
RESUMEN
Osteocyte lacuno-canalicular network (LCN) is comprised of micrometre-sized pores and submicrometric wide channels in bone. Accumulating evidence suggests multiple functions of this network in material transportation, mechanobiological signalling, mineral homeostasis and bone remodelling. Combining rhodamine staining and confocal laser scanning microscopy, the longitudinal cross-sections of six mouse tibiae were imaged, and the connectome of the network was quantified with a focus on the spatial heterogeneities of network density, connectivity and length of canaliculi. In-vivo loading and double calcein labelling on these tibiae allowed differentiating the newly formed bone from the pre-existing regions. The canalicular density of the murine cortical bone varied between 0.174 and 0.243 µm/µm3, and therefore is three times larger than the corresponding value for human femoral midshaft osteons. The spatial heterogeneity of the network was found distinctly more pronounced across the cortex than along the cortex. We found that in regions with a dense network, the LCN conserves its largely tree-like character, but increases the density by including shorter canaliculi. The current study on healthy mice should serve as a motivating starting point to study the connectome of genetically modified mice, including models of bone diseases and of reduced mechanoresponse.
Asunto(s)
Conectoma , Osteocitos , Animales , Osteocitos/metabolismo , Osteocitos/fisiología , Ratones , Tibia/diagnóstico por imagen , Tibia/fisiología , Ratones Endogámicos C57BL , Microscopía Confocal , HumanosRESUMEN
The role of the biomechanical stimulation generated from soft tissue has not been well quantified or separated from the self-regulated hard tissue remodeling governed by Wolff's Law. Prosthodontic overdentures, commonly used to restore masticatory functions, can cause localized ischemia and inflammation as they often compress patients' oral mucosa and impede local circulation. This biomechanical stimulus in mucosa is found to accelerate the self-regulated residual ridge resorption (RRR), posing ongoing clinical challenges. Based on the dedicated long-term clinical datasets, we developed an in-silico framework with a combination of techniques, including advanced image post-processing, patient-specific finite element models and unsupervised machine learning Self-Organizing map algorithm, to identify the soft tissue induced residual ridge resorption and quantitatively elucidate the governing relationship between the RRR and hydrostatic pressure in mucosa. The proposed governing equation has not only enabled a predictive simulation for RRR as showcased in this study, providing a biomechanical basis for optimizing prosthodontic treatments, but also extended our understanding of the mechanobiological responses in the soft-hard tissue interfaces and the role in bone remodeling. This article is protected by copyright. All rights reserved.
RESUMEN
This research centers on the development and synthesis of a longwave fluorescence probe, labeled as 60T, designed for the simultaneous detection of hydrogen sulfide, cysteine/homocysteine, and glutathione. The probe showcases a swift response, good linearity range, and heightened sensitivity, boasting that the detection limits of the probe for Cys, Hcy, GSH and H2S were 0.140, 0.202, 0.259 and 0.396 µM, respectively. Notably, its efficacy in monitoring thiol status changes in live MCF-7 cells is underscored by a substantial decrease in fluorescence intensity upon exposure to the thiol trapping reagent, N-ethyl maleimide (NEM). With an impressive red emission signal at 630 nm and a substantial Stokes shift of 80 nm, this probe exhibits remarkable sensitivity and selectivity for biothiols and H2S, indicating promising applications in the diagnosis and surgical navigation of relevant cancers.
Asunto(s)
Sulfuro de Hidrógeno , Colorantes Fluorescentes , Diagnóstico por Imagen , Cisteína , Glutatión , Homocisteína , Compuestos de SulfhidriloRESUMEN
PURPOSE: Arthroplasty phantoms, including total knee replacement (TKR) phantoms, have been frequently used to test metal artefact reduction methods applied to positron emission tomography/computed tomography (PET/CT) images. These phantoms generally simulate either simple anatomical features or simple activity distribution around the metal inserts in the PET/CT scans. 3D printing has been used recently to fabricate fillable anthropomorphic phantoms that accurately simulate volume and geometry. This study aims to describe the process of image segmentation, phantom modelling, 3D printing and validation of a population-based fillable TKR phantom that simulates human TKR PET/CT metal artefacts. METHODS: 10 participants (5 male and 5 female) were scanned using 3T MRI and the images were segmented to create average male and average female 3D knee models, inversely with void cortical and porous trabecular compartments for 3D printing and contrast media. Virtual total knee replacement (TKR) surgery was implemented on these models to prepare the insertion locations for knee prosthetic implants. Subsequently, TKR models were printed using a 3D photopolymer resin printer and then injected with normal saline to test the phantoms for any leaks. Subsequently, diluted iodinated contrast media was injected into the cortical compartment and saline with 18F-FDG was injected into the trabecular compartment and the phantom was scanned with PET/CT. The images were then evaluated and compared to the human knee radiographic features reported in the literature. RESULTS: Phantoms were shown to be fluid-tight with distinct compartments. They showed comparable volume and geometry to the segmented human MRI knees. The phantoms demonstrated similar values for x-ray attenuation and Hounsfield units (HU) to the literature for both cortical and trabecular compartments. The phantoms displayed a uniform distribution for the radioactive tracer, resembling that seen in human trabecular bone PET. TKR phantom PET/CT images with metal inserts replicated the clinical metal artefacts seen clinically in the periprosthetic area. CONCLUSION: This novel, 3D-printed, and customisable phantom effectively mimics the geometric, radiographic and radiotracer distribution features of real TKRs. Importantly, it simulates TKR image metal artefacts, making it suitable for repeatable and comprehensive evaluation of various metal artefact reduction methods in future research.
RESUMEN
The bone-periodontal ligament-tooth (BPT) complex is a unique mechanosensing soft-/hard-tissue interface, which governs the most rapid bony homeostasis in the body responding to external loadings. While the correlation between such loading and alveolar bone remodelling has been widely recognised, it has remained challenging to investigate the transmitted mechanobiological stimuli across such embedded soft-/hard-tissue interfaces of the BPT complex. Here, we propose a framework combining three distinct bioengineering techniques (i, ii, and iii below) to elucidate the innate functional non-uniformity of the PDL in tuning mechanical stimuli to the surrounding alveolar bone. The biphasic PDL mechanical properties measured via nanoindentation, namely the elastic moduli of fibres and ground substance at the sub-tissue level (i), were used as the input parameters in an image-based constitutive modelling framework for finite element simulation (ii). In tandem with U-net deep learning, the Gaussian mixture method enabled the comparison of 5195 possible pseudo-microstructures versus the innate non-uniformity of the PDL (iii). We found that the balance between hydrostatic pressure in PDL and the strain energy in the alveolar bone was maintained within a specific physiological range. The innate PDL microstructure ensures the transduction of favourable mechanobiological stimuli, thereby governing alveolar bone homeostasis. Our outcomes expand current knowledge of the PDL's mechanobiological roles and the proposed framework can be adopted to a broad range of similar soft-/hard- tissue interfaces, which may impact future tissue engineering, regenerative medicine, and evaluating therapeutic strategies. STATEMENT OF SIGNIFICANCE: A combination of cutting-edge technologies, including dynamic nanomechanical testing, high-resolution image-based modelling and machine learning facilitated computing, was used to elucidate the association between the microstructural non-uniformity and biomechanical competence of periodontal ligaments (PDLs). The innate PDL fibre network regulates mechanobiological stimuli, which govern alveolar bone remodelling, in different tissues across the bone-PDL-tooth (BPT) interfaces. These mechanobiological stimuli within the BPT are tuned within a physiological range by the non-uniform microstructure of PDLs, ensuring functional tissue homeostasis. The proposed framework in this study is also applicable for investigating the structure-function relationship in broader types of fibrous soft-/hard- tissue interfaces.
RESUMEN
In order to develop new electrode and electrolyte materials for advanced sodium-ion batteries (SIBs), it is crucial to understand a number of fundamental issues. These include the compositions of the bulk and interface, the structures of the materials used, and the electrochemical reactions in the batteries. Solid-state NMR (SS-NMR) has unique advantages in characterizing the local or microstructure of solid electrode/electrolyte materials and their interfaces-one such advantage is that these are determined in a noninvasive and nondestructive manner at the atomic level. In this review, we provide a survey of the recent advances in the understanding of the fundamental issues of SIBs using advanced NMR techniques. First, we summarize the applications of SS-NMR in characterizing electrode material structures and solid electrolyte interfaces (SEI). In particular, we elucidate the key role of in-situ NMR/MRI in revealing the complex reactions and degradation mechanisms of SIBs. Next, the characteristics and shortcomings of SS-NMR and MRI techniques in SIBs are also discussed in comparison to similar Li-ion batteries. Finally, an overview of SS-NMR and MRI techniques for sodium batteries are briefly discussed and presented.
RESUMEN
The formation of inactive lithium by side reactions with liquid electrolyte contributes to cell failure of lithium metal batteries. To inhibit the formation and growth of inactive lithium, further understanding of the formation mechanisms and composition of inactive lithium are needed. Here we study the impact of gas producing reactions on the formation of inactive lithium using ethylene carbonate as a case study. Ethylene carbonate is a common electrolyte component used with graphite-based anodes but is incompatible with Li metal anodes. Using mass spectrometry titrations combined with 13C and 2H isotopic labeling, we reveal that ethylene carbonate decomposition continuously releases ethylene gas, which further reacts with lithium metal to form the electrochemically inactive species LiH and Li2C2. In addition, phase-field simulations suggest the non-ionically conducting gaseous species could result in an uneven distribution of lithium ions, detrimentally enhancing the formation of dendrites and dead Li. By optimizing the electrolyte composition, we selectively suppress the formation of ethylene gas to limit the formation of LiH and Li2C2 for both Li metal and graphite-based anodes.
RESUMEN
Background and aim: Moxibustion is widely used in China and other East Asian countries to manage the symptom of ankylosing spondylitis (AS). This study investigated the effects of moxibustion intervention on protein expression through proteomics analysis in AS mice. Experimental procedure: Proteoglycan-induced spondylitis (PGISp) was established in Balb/c mice. PGISp mice were intervened with daily moxibustion at ST36, BL23, and DU4 for four weeks. Various biochemical (including pro-inflammatory cytokines and bone metabolism indexes) and histopathological parameters were determined. The effects of moxibustion on protein changes in AS mice were analyzed using data-independent acquisition-mass spectrometry (DIA-MS). The target proteins were then confirmed by Western blot analysis. Results: Moxibustion significantly decreased pro-inflammatory cytokine expression including IL-1ß, TNF-α, IL-17, and IL-6, reduced the mRNA expression of RANKL, RANK, ALP, and OCN, and improved the histopathological examination in AS mice. DIA-MS proteomic technique has identified 25 candidate proteins involved in the mechanisms of moxibustion for AS mice, most of which are mainly associated with the regulation of Wnt/ß-catenin. Integrated pathway analysis revealed that glycine, serine and threonine metabolism together with lipid metabolism were the most important canonical pathways involved in the anti-AS effect of moxibustion. In line with the multi-omic data, the levels of BPGM, APOC2, APOE, and GPD1 modified in the AS mice, intervened with moxibustion as confirmed by Western blot. In particular, APOE may play a key role in linking the lipid metabolism and the Wnt/ß-catenin pathway of new bone formation. Conclusion: In conclusion, moxibustion may reduce pro-inflammatory cytokines and improve bone erosion for AS mice. The regulation of APOE by moxibustion may have a potential inhibitory effect on the Wnt/ß-catenin pathway in AS mice. However, due to the lack of silencing or overexpression of key molecules of the signal pathway, whether the beneficial and positive effect of moxibustion involved in the regulation of Wnt/ß-catenin signaling pathway by APOE or other aspects, needed to be explored in further study.
RESUMEN
The demand for revision knee replacement (RKR) has increased dramatically with rising patient life expectancy and younger recipients for primary TKR. However, significant challenges to RKR arise from osseous defects, reduced bone quality, potential bone volume loss from implant removal and the need to achieve implant stability. This study utilizes the outcomes of an ongoing RKR clinical trial using porous metaphyseal cones 3D-printed of titanium, to investigate 1) bone mineral density (BMD) changes in three fixation zones (epiphysis, metaphysis, and diaphysis) over a year and 2) the biomechanical effects of the cones at 6 months post-surgery. It combines dual-energy x-ray absorptiometry (DXA), computed tomography (CT) with patient-specific based finite element (FE) modelling. Bone loss (-0.086 ± 0.05 g/cm2) was found in most patients over the first year. The biomechanical assessment considered four different loading scenarios from standing, walking on a flat surface, and walking downstairs, to a simulated impact of the knee. The patient-specific FE models showed that the cones marginally improved the strain distribution in the bone and shared the induced load but played a limited role in reducing the risks of bone fracture or cement debonding. This technique of obtaining real live data from a randomized clinical trial and inserting it into an in-silico FE model is unique and innovative in RKR research. The tibia RKR biomechanics examined open up further possibilities, allowing the in-silico testing of prototypes and implant combinations without putting patients at risk as per the recommended IDEAL framework standards. This process with further improvements could allow rapid innovation, optimization of implant design, and improve surgical planning.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Prótesis de la Rodilla , Artroplastia de Reemplazo de Rodilla/efectos adversos , Fenómenos Biomecánicos , Humanos , Articulación de la Rodilla/cirugía , Diseño de Prótesis , Reoperación/métodos , Tibia/diagnóstico por imagen , Tibia/cirugíaRESUMEN
To investigate bone remodelling responses to mandibulectomy, a joint external and internal remodelling algorithm is developed here by incorporating patient-specific longitudinal data. The primary aim of this study is to simulate bone remodelling activity in the conjunction region with a fibula free flap (FFF) reconstruction by correlating with a 28-month clinical follow-up. The secondary goal of this study is to compare the long-term outcomes of different designs of fixation plate with specific screw positioning. The results indicated that the overall bone density decreased over time, except for the Docking Site (namely DS1, a region of interest in mandibular symphysis with the conjunction of the bone union), in which the decrease of bone density ceased later and was followed by bone apposition. A negligible influence on bone remodeling outcome was found for different screw positioning. This study is believed to be the first of its kind for computationally simulating the bone turn-over process after FFF maxillofacial reconstruction by correlating with patient-specific follow-up.
Asunto(s)
Colgajos Tisulares Libres , Reconstrucción Mandibular , Procedimientos de Cirugía Plástica , Remodelación Ósea , Trasplante Óseo , Peroné/cirugía , Colgajos Tisulares Libres/cirugía , Humanos , Mandíbula/fisiología , Mandíbula/cirugía , Reconstrucción Mandibular/métodos , Procedimientos de Cirugía Plástica/métodos , Estudios RetrospectivosRESUMEN
PURPOSE: 18F-NaF PET is valuable for detecting bone metabolism through osteoblastic activity in the assessment of bone disease. Hawkins, Patlak, and standardised uptake value (SUV) are the most common quantitative measurements used to evaluate bone metabolism. This systematic review evaluates the correlation between quantitative positron emission tomography (PET) methods and to compare their precision. METHODS: A systematic search in Medline, PubMed, SCOPUS, and Web of Science was undertaken to find relevant papers published from 2000. All studies with human adults undergoing 18F-NaF PET, PET/CT, or PET/MRI were included except for subjects diagnosed with non-diffuse metabolic bone disease or malignancy. Quality Assessment Tool for Studies of Diverse Designs (QATSDD) was used to assess risk of bias. A qualitative review and meta-analysis using Hedges random-effect model was used producing summary size effects of the correlation between methods in healthy and unhealthy bone sites and assessing study heterogeneity. RESULTS: 228 healthy and unhealthy participants were included across 12 studies resulted from the systematic search. One-third of studies had a moderate quality percentage while the rest had relatively high quality. The pooled correlation coefficient in meta-analysis showed a high correlation of more than 0.88 (0.71-1.05. 95 %CI) between SUV and Hawkins and more than 0.96 (0.88-1.03. 95 %CI) between Patlak and Hawkins within all subgroups, suggesting all methods yield similar results in healthy and unhealthy bone sites. SUV has the lowest precision error followed by Patlak while Hawkins method showed the highest precision error. CONCLUSION: Patlak is the best within research and SUV is better within clinical practice.
Asunto(s)
Tomografía Computarizada por Tomografía de Emisión de Positrones , Tomografía de Emisión de Positrones , Adulto , Huesos/diagnóstico por imagen , Fluorodesoxiglucosa F18 , Humanos , Cinética , Imagen por Resonancia Magnética , RadiofármacosRESUMEN
The periodontal ligament (PDL) is a highly heterogeneous fibrous connective tissue and plays a critical role in distributing occlusal forces and regulating tissue remodeling. Its mechanical properties are largely determined by the extracellular matrix, comprising a collagenous fiber network interacting with the capillary system as well as interstitial fluid containing proteoglycans. While the phase-contrast micro-CT technique has portrayed the 3D microscopic heterogeneity of PDL, the topological parameters of its network, which is crucial to understanding the multiscale constitutive behavior of this tissue, has not been characterized quantitatively. This study aimed to provide new understanding of such microscopic heterogeneity of the PDL with quantifications at both tissue and collagen network levels in a spatial manner, by combining phase-contrast micro-CT imaging and a purpose-built image processing algorithm for fiber analysis. Both variations within a PDL and among the PDL with different shapes, i.e. round-shaped and kidney-shaped PDLs, are described in terms of tissue thickness, fiber distribution, local fiber densities, and fiber orientation (namely azimuthal and elevation angles). Furthermore, the tissue and collagen fiber network responses to mechanical loading were evaluated in a similar manner. A 3D helical alignment pattern was observed in the fiber network, which appears to regulate and adapt a screw-like tooth motion under occlusion. The microstructural heterogeneity quantified here allows development of sample-specific constitutive models to characterize the PDL's functional and pathological loading responses, thereby providing a new multiscale framework for advancing our knowledge of this complex limited mobility soft-hard tissue interface.
Asunto(s)
Ligamento Periodontal , Diente , Fenómenos Biomecánicos/fisiología , Matriz Extracelular , Ligamento Periodontal/fisiología , Estrés Mecánico , Microtomografía por Rayos XRESUMEN
BACKGROUND: Drug use disorder has high potential for relapse and imposes an enormous burden on public health in China. Since the promulgation of the Anti-drug law in 2008, community-based rehabilitation has become the primary approach to treat drug addiction. However, multiple problems occurred in the implementation process, leading to a low detoxification rate in the community. Mobile health (mHealth) serves as a promising tool to improve the effectiveness and efficiency of community-based rehabilitation. Community-based addiction rehabilitation electronic system (CAREs) is an interactive system for drug users and their assigned social workers. OBJECTIVE: The study aimed to examine the feasibility and preliminary efficacy of CAREs in community-based rehabilitation from the perspective of drug users and social workers in Shanghai, China. METHODS: In this pilot randomized controlled trial, 40 participants were recruited from the community in Shanghai from January to May 2019. Participants randomized to the intervention group (n=20) received CAREs + community-based rehabilitation, while participants in the control group (n=20) received community-based rehabilitation only for 6 months. CAREs provided education, assessment, and SOS (support) functions for drug users. The assigned social workers provided service and monitored drug use behavior as usual except that the social workers in the intervention group could access the webpage end to obtain drug users' information and fit their routine workflow into CAREs. The primary outcome was the feasibility of CAREs, reflected in the overall proportion and frequency of CAREs features used in both app and webpage end. The secondary outcomes were the effectiveness of CAREs, including the percentage of drug-positive samples, longest period of abstinence, contact times with social workers, and the change of Addiction Severity Index (ASI) from baseline to the 6-month follow-up. RESULTS: The number of participants logged in to the app ranged from 7 to 20 per week, and CAREs had relatively high levels of continued patient use. Drug users preferred assessment and education features in the app end while their social workers showed high levels of use in urine results record and viewing assessment results on the webpage end. After the 6-month intervention, 3.3% (17/520) of samples in the intervention group and 7.5% (39/520) in the control group were drug-positive (F=4.358, P=.04). No significant differences were noted between the control and intervention groups in terms of longest duration of abstinence, number of contact times and ASI composite scores. CONCLUSIONS: The study preliminarily demonstrated that with relatively good feasibility and acceptability, CAREs may improve the effectiveness and efficiency of the community-based rehabilitation, which provided instruction for further improvement of the system. TRIAL REGISTRATION: ClinicalTrials.gov NCT03451344; https://clinicaltrials.gov/ct2/show/NCT03451344. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): RR2-10.3389/fpsyt.2018.00556.
Asunto(s)
Trastornos Relacionados con Sustancias , China , Electrónica , Estudios de Factibilidad , Humanos , Proyectos PilotoRESUMEN
Mechanical failure of zirconia-based full-arch implant-supported fixed dental prostheses (FAFDPs) remains a critical issue in prosthetic dentistry. The option of full-arch implant treatment and the biomechanical behaviour within a sophisticated screw-retained prosthetic structure have stimulated considerable interest in fundamental and clinical research. This study aimed to analyse the biomechanical responses of zirconia-based FAFDPs with different implant configurations (numbers and distributions), thereby predicting the possible failure sites and the optimum configuration from biomechanical aspect by using finite element method (FEM). Five 3D finite element (FE) models were constructed with patient-specific heterogeneous material properties of mandibular bone. The results were reported using volume-averaged von-Mises stresses (σVMVA) to eliminate numerical singularities. It was found that wider placement of multi-unit copings was preferred as it reduces the cantilever effect on denture. Within the limited areas of implant insertion, the adoption of angled multi-unit abutments allowed the insertion of oblique implants in the bone and wider distribution of the multi-unit copings in the prosthesis, leading to lower stress concentration on both mandibular bone and prosthetic components. Increasing the number of supporting implants in a FAFDPs reduced loading on each implant, although it may not necessarily reduce the stress concentration in the most posterior locations significantly. Overall, the 6-implant configuration was a preferable configuration as it provided the most balanced mechanical performance in this patient-specific case.
Asunto(s)
Implantes Dentales , Circonio , Prótesis Dental de Soporte Implantado , Análisis de Elementos Finitos , Humanos , Mandíbula , Estrés MecánicoRESUMEN
The biomechanics associated with buccal bone thickness (BBT) augmentation remains poorly understood, as there is no consistent agreement in the adequate BBT to avoid over-loading resorption or over-augmenting surgical difficulty. This study utilizes longitudinal clinical image data to establish a self-validating time-dependent finite element (FE)-based remodeling procedure to explore the effects of different buccal bone thicknesses on long-term bone remodeling outcomes in silico. Based upon the clinical computed tomography (CT) scans, a patient-specific heterogeneous FE model was constructed to enable virtual BBT augmentation at four different levels (0.5, 1.0, 1.5, and 2.0 mm), followed by investigation into the bone remodeling behavior of the different case scenarios. The findings indicated that although peri-implant bone resorption decreased with increasing initial BBT from 0.5 to 2 mm, different levels of the reduction in bone loss were associated with the amount of bone augmentation. In the case of 0.5 mm BBT, overloading resorption was triggered during the first 18 months, but such bone resorption was delayed when the BBT increased to 1.5 mm. It was found that when the BBT reached a threshold thickness of 1.5 mm, the bone volume can be better preserved. This finding agrees with the consensus in dental clinic, in which 1.5 mm BBT is considered clinically justifiable for surgical requirement of bone graft. In conclusion, this study introduced a self-validating bone remodeling algorithm in silico, and it divulged that the initial BBT affects the bone remodeling outcome significantly, and a sufficient initial BBT is considered essential to assure long-term stability and success of implant treatment.
Asunto(s)
Remodelación Ósea , Implantes Dentales , Maxilar/cirugía , Boca/fisiología , Algoritmos , Densidad Ósea , Femenino , Análisis de Elementos Finitos , Humanos , Imagenología Tridimensional , Modelos Lineales , Persona de Mediana Edad , Reproducibilidad de los Resultados , Estrés MecánicoRESUMEN
Correction for 'MoS2 nanoflowers encapsulated into carbon nanofibers containing amorphous SnO2 as an anode for lithium-ion batteries' by Huanhui Chen et al., Nanoscale, 2019, 11, 16253-16261.
RESUMEN
SnO2 with high abundance, large theoretical capacity, and nontoxicity is considered to be a promising candidate for use as advanced electrodes. However, the poor electronic conductivity and large volume variations hinder the practical applications of SnO2-based electrodes for use in lithium-ion batteries (LIBs). Herein, the MoS2-SnO2 heterostructures were encapsulated into carbon nanofibers (CNFs) via facile solvothermal and electrospinning methods. Remarkably, when the binder-free and robust MoS2-SnO2@CNF is employed as the anode for LIBs, such a clever structure yields a discharge capacity of 983 mA h g-1 at a current density of 200 mA g-1 after 100 cycles and a capacity of 710 mA h g-1 after 800 cycles at a current density of 2000 mA g-1. Moreover, full cells and flexible full cells were constructed, which exhibited high flexibility and delivered a high reversible capacity of 463 mA h g-1 after 100 cycles at 500 mA g-1. The exceptional performance of MoS2-SnO2@CNF could be attributed to the rational design of the electrode structure. On one hand, the robust structure of the amorphous SnO2 and MoS2 nanoflowers in the conductive carbon network not only provides direct current pathways, but also enhances electron transfer. On the other hand, the abundance of p-n heterogeneous interfaces considerably reduces the charge transfer resistance and enhances the surface reaction kinetics. This work proposes a feasible strategy to enhance the capacity and stability of SnO2-based electrodes and opens up a new avenue for the potential applications of SnO2 anode materials.
RESUMEN
Orthodontic root resorption is a common side effect of orthodontic therapy. It has been shown that high hydrostatic pressure in the periodontal ligament (PDL) generated by orthodontic forces will trigger recruitment of odontoclasts, leaving resorption craters on root surfaces. The patterns of resorption craters are the traces of odontoclast activity. This study aimed to investigate resorptive patterns by: (i) quantifying spatial root resorption under two different levels of in vivo orthodontic loadings using microCT imaging techniques and (ii) correlating the spatial distribution pattern of resorption craters with the induced mechanobiological stimulus field in PDL through nonlinear finite-element analysis (FEA) in silico. Results indicated that the heavy force led to a larger total resorption volume than the light force, mainly by presenting greater individual crater volumes ( p < 0.001) than increasing crater numbers, suggesting that increased mechano-stimulus predominantly boosted cellular resorption activity rather than recruiting more odontoclasts. Furthermore, buccal-cervical and lingual-apical regions in both groups were found to have significantly larger resorption volumes than other regions ( p < 0.005). These clinical observations are complemented by the FEA results, suggesting that root resorption was more likely to occur when the volume average compressive hydrostatic pressure exceeded the capillary blood pressure (4.7 kPa).