RESUMEN
System-level fault diagnosis model, namely, the PMC model, detects fault nodes only through the mutual testing of nodes in the system without physical equipment. In order to achieve server nodes fault diagnosis in large-scale data center networks (DCNs), the traditional algorithm based on the PMC model cannot meet the characteristics of high diagnosability, high accuracy and high efficiency due to its inability to ensure that the test nodes are fault-free. This paper first proposed a fault-tolerant Hamiltonian cycle fault diagnosis (FHFD) algorithm, which tests nodes in the order of the Hamiltonian cycle to ensure that the test nodes are faultless. In order to improve testing efficiency, a hierarchical diagnosis mechanism was further proposed, which recursively divides high scale structures into a large number of low scale structures based on the recursive structure characteristics of DCNs. Additionally, we proved that $ 2(n-2){n^{k-1}} $ and $ (n-2){t_{n, k}}/{t_{n, 1}} $ faulty nodes could be detected for $ BCub{e_{n, k}} $ and $ DCel{l_{n, k}} $ within a limited time for the proposed diagnosis strategy. Simulation experiments have also shown that our proposed strategy has improved the diagnosability and test efficiency dramatically.
RESUMEN
Grey wolf optimizer (GWO) is a global search algorithm based on grey wolf hunting activity. However, the traditional GWO is prone to fall into local optimum, affecting the performance of the algorithm. Therefore, to solve this problem, an equalized grey wolf optimizer with refraction opposite learning (REGWO) is proposed in this study. In REGWO, the issue about the low swarm population variety of GWO in the late iteration is well overcome by the opposing learning of refraction. In addition, the equilibrium pool strategy reduces the likelihood of wolves going to the local extremum. To investigate the effectiveness of REGWO, it is evaluated on 21 widely used benchmark functions and IEEE CEC 2019 test functions. Experimental results show/ that REGWO performs better than the other competitors on most benchmarks.
Asunto(s)
Algoritmos , Aprendizaje , Simulación por Computador , ProbabilidadRESUMEN
Node localization is an essential requirement in the increasing prevalence of wireless sensor networks applications. As the most commonly used localization algorithm, the DV_Distance algorithm is more sensitive to ranging error, and also has lower localization accuracy. Therefore, this paper proposes a novel difference DV_Distance localization algorithm using correction coefficients of unknown nodes. Taking account of the fact that correction coefficients of unknown nodes should be different, the proposed method has employed the correction model based on unknown nodes. Some correction coefficients for different direction anchor nodes can be indirectly calculated using the known difference of actual Euclidean distance and corresponding accumulated hop distance between anchor nodes, and then the weighting factors for the correction coefficients of different direction anchor nodes are also computed according to their actual contribution degree, so as to make sure that the corrected distances from unknown nodes to anchor nodes, modified by the final correction coefficient, are closer to the actual distances. At last, the positions of unknown nodes can be calculated using multilateral distance measurement. The simulation results demonstrate that the proposed approach is a localization algorithm with easier implementation, and it not only has better performance on localization accuracy than existing DV_Distance localization algorithm, but also improves the localization stability under the same experimental conditions.
RESUMEN
A robot-based three-dimensional (3D) measurement system is presented. In the presented system, a structured light vision sensor is mounted on the arm of an industrial robot. Measurement accuracy is one of the most important aspects of any 3D measurement system. To improve the measuring accuracy of the structured light vision sensor, a novel sensor calibration approach is proposed to improve the calibration accuracy. The approach is based on a number of fixed concentric circles manufactured in a calibration target. The concentric circle is employed to determine the real projected centres of the circles. Then, a calibration point generation procedure is used with the help of the calibrated robot. When enough calibration points are ready, the radial alignment constraint (RAC) method is adopted to calibrate the camera model. A multilayer perceptron neural network (MLPNN) is then employed to identify the calibration residuals after the application of the RAC method. Therefore, the hybrid pinhole model and the MLPNN are used to represent the real camera model. Using a standard ball to validate the effectiveness of the presented technique, the experimental results demonstrate that the proposed novel calibration approach can achieve a highly accurate model of the structured light vision sensor.
RESUMEN
Several observational studies on the association between Cd exposure and risk of prostate cancer have yielded inconsistent results. To address this issue, we conducted a meta-analysis to evaluate the correlation between Cd exposure and risk of prostate cancer.Relevant studies in PubMed and Embase databases were retrieved until October 2015. We compared the highest and lowest meta-analyses to quantitatively evaluate the relationship between Cd exposure and risk of prostate cancer. Summary estimates were obtained using a random-effects model.In the general population, high Cd exposure was not associated with increased prostate cancer (OR 1.21; 95% CI 0.91-1.64), whereas the combined standardized mortality ratio of the association between Cd exposure and risk of prostate cancer was 1.66 (95% CI 1.10-2.50) in populations exposed to occupational Cd. In addition, high D-Cd intake (OR 1.07; 95% CI 0.96-1.20) and U-Cd concentration (OR 0.86; 95% CI 0.48-1.55) among the general population was not related to the increased risk of prostate cancer. In the dose analysis, the summary relative risk was 1.07 (95% CI 0.73-1.57) for each 0.5 µg/g creatinine increase in U-Cd and 1.02 (95% CI 0.99-1.06) for each 10 µg/day increase of dietary Cd intake. However, compared with nonoccupational exposure, high occupational Cd exposure may be associated with the increased risk of prostate cancer.This meta-analysis suggests high Cd exposure as a risk factor for prostate cancer in occupational rather than nonoccupational populations. However, these results should be carefully interpreted because of the significant heterogeneity among studies. Additional large-scale and high-quality prospective studies are needed to confirm the association between Cd exposure and risk of prostate cancer.
Asunto(s)
Cadmio/toxicidad , Exposición a Riesgos Ambientales/efectos adversos , Contaminantes Ambientales/toxicidad , Neoplasias de la Próstata/inducido químicamente , Humanos , Masculino , Modelos Estadísticos , Exposición Profesional/efectos adversos , Factores de RiesgoRESUMEN
Analytical solutions of groundwater travel time to a pumping well in an unconfined aquifer have been developed in previous studies, however, the change in evapotranspiration was not considered. Here, we develop a mathematical model of unconfined flow toward a discharge well with redistribution of groundwater evapotranspiration for travel time analysis. Dependency of groundwater evapotranspiration on the depth to water table is described using a linear formula with an extinction depth. Analytical solutions of groundwater level and travel time are obtained. For a typical hypothetical example, these solutions perfectly agree with the numerical simulation results based on MODFLOW and MODPATH. As indicated in a dimensionless framework, a lumped parameter which is proportional to the pumping rate controls the distributions of groundwater evapotranspiration rate and the travel time along the radial direction.