Poly (lactic acid) blends with excellent low temperature toughness: A comparative study on poly (lactic acid) blends with different toughening agents.

Poly (lactic acid) (PLA) blends with different toughening agents were prepared by melt compounding, and the effects of toughening agents on the toughness of PLA, especially the low-temperature toughness, were investigated. All blends were immiscible systems, but the rheological Cole-Cole diagram showed that the blends had certain compatibility, and the interfacial bonding of PLA/Ethylene/butyl methacrylate/Glycidyl Methacrylate Terpolymer (GEBMA) blend was the best. With addition of the toughening agents, all blends showed improvement of the tensile and impact toughness both at room temperature and low temperature. GEBMA was the best toughening agent, the elongation at break and impact strength at room temperature and low temperature were greatly improved. The elongation at break, tensile strength and impact strength of PLA blend with 20 wt% GEBMA at -20 °C was 55.8 MPa, 195.9% and 18.8 kJ/m2, respectively, which showed the reinforcement and super ductility at low temperature. However, the toughening effect of Poly (propylene carbonate) polyurethane (PPCU) at low temperature was poor. The Tg and interfacial bonding were the main factors affecting the toughness of the blends, especially at low temperature. The lower the Tg and the better the interfacial bonding, the better the toughness of the blends.

Improvement of the strength and toughness of biodegradable polylactide/silica nanocomposites by uniaxial pre-stretching.

Highly toughened polylactide (PLA) nanocomposites with balanced stiffness and strength were successfully prepared by combining the modification of 5 wt% silica (SiO2) nanoparticles and uniaxial pre-stretching. The PLA/5 wt% SiO2 nanocomposites fractured in a brittle way due to the network structure composed of cohesional entanglements. After pre-stretching, the elongation at break was increased to 168% at pre-stretching ratio (PSR) of only 0.5, which should be attributed to the destruction of the network structure of cohesional entanglements. With the increment of PSR, the modulus and tensile strength were improved obviously (2725 MPa, 101.6 MPa at PSR = 2.0) while the elongation at break (56% at PSR = 2.0) reduced gradually because of the formation of orientation and mesophase. However, the elongation at break was still larger than that of undrawn PLA (5.4%) and undrawn PLA nanocomposites (7.2%), indicating that the uniaxial pre-stretching was an effect way to strengthen and toughen PLA nanocomposites.

Preparation and properties of poly(L-lactic acid) blends with excellent low-temperature toughness by blending acrylic ester based impact resistance agent.

Poly(L-lactic acid) (PLLA) blends with excellent low-temperature toughness and strength were prepared by melt compounding with acrylic ester based impact resistance agent (AEIR). The morphology, thermal properties, mechanical properties and biodegradability of the blends were investigated. Morphology observations revealed the blend was immiscible but had good compatibility with the dispersed phase size of about 200-300 nm. With the addition of AEIR, dramatic improvement in toughness of PLLA was achieved in a wide temperature range, especially at low temperatures the tensile strength was effectively remained. For the blend with 20 wt% AEIR, the tensile strength, elongation at break and impact strength were 51.6 MPa, 72% and 77.1 KJ/m2 at -20 °C, respectively, much greater than that reported. The calculated Tg of AEIR was lower than the test temperatures, and the brittle-tough transition occurred. The PLLA matrix demonstrated obvious shear yielding which induced energy dissipation and therefore lead to excellent toughness of the blends. Moreover, the biodegradation of PLLA was enhanced after blends preparation.

Chemical, microbial, and metabolic analysis of Taisui cultured in honey solution.

Taisui, a special substance occasionally found in China, can now be artificially cultured. In order to evaluate the safety of an artificially cultured Taisui (acTS) and develop it into fermented, functional food or oral liquid, the macronutrients, trace elements, microbial community, and extracellular metabolites of Taisui have been investigated in this study. Results showed that the concentrations of total carbohydrates, protein, fat, total ash, and moisture of wet acTS were 2.13 g/100 g, 0.13 g/100 g, 0.07 g/100 g, 0.04 g/100 g, and 88.3%, respectively. The concentrations of top three trace elements of K, Ca, and P, are 1,424.92 mg/kg, 159.96 mg/kg, and 67.89 mg/kg, respectively. Proteobacteria, Euryarchaeota, and Ascomycota were the dominant phyla of bacteria, archaea, and fungi, respectively. Uncultured_bacterium_f_Anaerolineaceae, Alcaligenes, and Ochrobactrum were the three most abundant genera of bacteria; Methanosaeta, Methanosphaera, and Natronomonas, the most abundant genera of archaea; Zygosaccharomyces, Mortierella, and Fusarium, the most abundant genera of fungi. There were 311 metabolites increased in acTS. Most of the metabolites are beneficial to human. These metabolites can be contributed to microbes in acTS. In conclusion, acTS is not a good source of macronutrients and of trace elements, while the safeness of some microorganisms in acTS is also unknown. Nevertheless, it still provides some probiotics and beneficial metabolites for human. It is thus possible to develop acTS into foods when the safety of each microorganism is proved.

Recovery of Ggt7 and Ace Expressions in the Colon Alleviates Collagen-Induced Arthritis in Rats by Specific Bioactive Polysaccharide Intervention.

Rheumatoid arthritis (RA) causes swollen joints and irreversible joint damage and may even elevate cancer risks. Several bioactive nonstarch polysaccharides (NSPs) were reported to alleviate RA, but the key colonic genes accountable for this alleviation were elusive. Using collagen-induced arthritis as an RA model, colonic candidate genes related to RA were selected by transcriptome and methylome. The key genes were determined by comparing the transcriptome, methylome, and quantitative reverse transcription polymerase chain reaction profiles in RA rats with and without Lycium barbarum polysaccharides' treatment and further validated using Angelica sinensis polysaccharides and Astragalus propinquus polysaccharides for comparison. Both colonic genes γ-glutamyltransferase 7 (Ggt7) and angiotensin-I-converting enzyme (Ace) were downregulated by RA, and they were upregulated after L. barbarum polysaccharides' and A. sinensis polysaccharides' intervention that reduced the RA-caused hypermethylation status in nucleotide sites in the exon/promoter region of the two genes. However, the A. propinquus polysaccharides' intervention barely reduced the hypermethylation in the corresponding sites, failing to recover the expressions of these two genes and improve RA. Therefore, the colonic Ggt7 and Ace can be considered as key genes accountable for RA alleviation by bioactive NSP intervention. This study provides a more comprehensive insight into diet intervention to improve RA.

TERT rs10069690 polymorphism and cancers risk: A meta-analysis.

BACKGROUND: Studies have identified that the telomerase reverse transcriptase (TERT) gene polymorphism rs10069690 (C>T) is associated with cancer risk, but the results remain inconclusive. METHODS: To provide a more precise estimation of the relationship, we performed a meta-analysis of 45 published studies including 329,035 cases and 730,940 controls. We conducted a search in PubMed, Google Scholar and Web of Science to select studies on the association between rs10069690 and cancer risk. Stratification by ethnicity, cancer type, cancers' classification, source of control, sample size, and genotype method was used to explore the source of heterogeneity. The pooled odds ratios (ORs) and corresponding 95% confidence intervals (CIs) were evaluated using random effects models. Sensitivity, publication bias, false-positive report probability (FPRP) and statistical power were also assessed. RESULTS: The result demonstrated that rs10069690 was significantly associated with an increased risk of cancer overall (OR = 1.09, 95% CI: 1.06-1.12, p < .001) under the allele model. Stratification analysis revealed an increased cancer risk in subgroups of breast cancer, ovarian cancer, lung cancer, thyroid cancer, and renal cell carcinoma (RCC). However, a significantly decreased association was observed in pancreatic cancer in the European population (OR = 0.93,95% CI: 0.87-0.99, p = .031). In the subgroup analysis based on cancer type, no significant association was found in prostate cancer, leukemia, colorectal cancer and glioma. CONCLUSIONS: This meta-analysis suggested that the TERT rs10069690 polymorphism may be a risk factor for cancer, especially breast cancer, ovarian cancer, lung cancer, thyroid cancer, and RCC. Further functional studies are warranted to reveal the role of the polymorphism in carcinogenesis.

Evaluation of GALNT16 polymorphisms to breast cancer risk in Chinese population.

BACKGROUND: Polypeptide N-acetylgalactosaminyltransferase 16 (GALNT16) is an N-acetylgalactosaminyltransferase gene that alters protein O-glycosylation, which plays a role in tumor development. This study aims to explore the association of eight GALNT16 polymorphisms with susceptibility to breast cancer (BC). METHODS: This case-control study included 563 BC patients and 552 age-matched healthy controls from the Chinese Han population. The genotypes of GALNT16 polymorphisms were detected using the Agena MassARRAY. The relationship between GALNT16 polymorphisms and BC risk was evaluated using a chi-squared test with an odds ratio (OR) and 95% confidence intervals (CI) under five genetic models. RESULTS: We observed that rs2105269 and rs72625676 were associated with higher BC risk in younger patients with age ≤51 (rs2105269, codominant: p = .006; recessive: p = .005 additive: p = .018; and allele: p = .012; rs72625676, codominant: p = .038; recessive: p = .037). For rs1275678 polymorphism, there was a significantly decreased risk of BC among elder patients (codominant: p = .017; dominant: p = .019; additive: p = .030; and allele: p = .029). Further analysis by clinical characteristics showed rs2105269 was associated with tumor size and lymph node metastasis. CONCLUSION: Our study suggests that GALNT16 polymorphisms are associated with BC susceptibility in Chinese population.

Ductile and biodegradable poly (lactic acid) matrix film with layered structure.

Polylactide (PLA), as a biodegradable packing material, has attracted plenty of attention. However, some problems still limit the application of PLA in packing industry such as the inherent brittleness and low crack propagation resistance. In order to overcome these challenges, we blended PLA with a reactive toughening agent (Ethylene-Acrylic ester-Glycidyl methacrylate terpolymer) during extrusion and film processing. The glycidyl methacrylate groups in toughening agent offered some sites to react with COOH and OH groups of PLA thus leaded to a great interfacial compatibility. The proper compatibility was the premise of adjusting the phase structure of blend and film based on different processing methods. The blend had a sea-island structure after melting extrusion and heat pressed technologies while film formed annular layer structure after film blowing. The structure determined properties. Both the toughness and melt strength of blends had been improved. Moreover, it was interesting to found that tear strength of film with 10% toughening agent dramatically increased to 197.8 KN/m and 137.7 KN/m in the transverse direction (TD) and in the machine direction (MD), respectively. Besides, the elongation at break of film could reach 242.2% in MD. This work exhibited that phase morphology was significant for mechanical performances.

Analysis of MIR155HG variants and colorectal cancer susceptibility in Han Chinese population.

BACKGROUND: MIR155HG plays an important role in malignant tumors, but it is rarely reported in the occurrence and development of colorectal cancer (CRC). This study investigated the effects of MIR155HG polymorphisms on CRC susceptibility from the perspective of molecular genetics. METHODS: Eight SNPs in MIR155HG were selected and genotyped among 514 CRC cases and 510 healthy controls using the Agena MassARRAY platform. The associations between these SNPs and the CRC risk were evaluated under genetic models using conditional logistic regression analysis. The HaploReg v4.1 database was used for SNPs functional prediction. RESULTS: The allele "C" of rs12482371 (p = 0.047), allele "C" of rs1893650 (p = 0.025), and the allele "A" of rs928883 (p = 0.037) in MIR155HG were significantly associated with CRC risk. Genetic model analysis revealed that rs12482371 and rs1893650 increased CRC risk; whereas rs928883 was associated with reduced CRC risk. Stratification analysis showed that rs9383938 was a protective factor in CRC patients under 60 years old. Rs12482371 and rs1893650 were associated with the CRC risk in females. Rs11911469 and rs34904192 may affect the clinical stage and lymph node metastasis. Moreover, the haplotypes CTT and GTC of LD block rs4143370|rs77218221|rs12482371, and the haplotypes CATGA and CACGG of LD block rs77699734|rs11911469|rs1893650|rs34904192|rs928883 were significantly associated with CRC risk. CONCLUSION: This study revealed that MIR155HG SNPs were associated with CRC susceptibility and could be predictive biomarkers for CRC risk.

Effect of molecular stereoregularity on the transcrystallinization properties of poly(l-lactide)/basalt fiber composites.

A comparative study on interfacial crystallization of poly(l-lactic acid) (PLLA) with different stereoregularity (PLLA2003D 96.0%, PLLA4032D 98.5%, and PLLA290 99.2%) surrounding macroscopic basalt fibers (BF) has been carried out in polymer composites. The effect of stereoregularity on the interface crystallization was systemically studied by microstructure. From polarized optical microscopy (POM) analysis, it was found that the transcrystallinity of PLLA was influenced by temperature. Moreover, stereoregularity significantly affects the crystallization kinetics. It was also found that increased molecular mobility providing faster orientation with high stereoregularity and low molecular weight. It might be the reason for the observation that the PLLA290 samples crystallized more rapidly than the PLLA4032D samples. Appropriate molecular stereoregularity exhibits a clear increase in extensional stress that is directly correlated with the crystalline orientation of the crystallization samples. The mechanism of formation of transcrystallinity underwent the process of "a mismatch in thermal expansion coefficients" with the extensional stress.

Effect of Ethylene/butyl methacrylate/Glycidyl Methacrylate Terpolymer on toughness and biodegradation of poly (l-lactic acid).

The super toughed poly(l-lactic acid) (PLLA) blends with various content of Ethylene/butyl methacrylate/Glycidyl Methacrylate Terpolymer (GEBMA) were prepared by melt compounding. The blend was an immiscible system but had good compatibility due to the chemical reaction between the epoxy groups of GEBMA and the end group of PLLA during the blending process. The addition of GEBMA suppressed the cold crystallization and non-isothermal melt crystallization of PLLA. GEBMA was a very effective toughening agent for PLLA. The addition of only 15 wt% GEBMA, the elongation at break and impact strength of the blend were significantly improved compared to neat PLLA, which were 63 and 18 times that of neat PLLA, respectively. Scanning electron microscopy (SEM) images of the impact fracture surfaces of the blends showed a large amount of cavities and plastic deformation in the blend, which induced energy dissipation and therefore led to the improvement in toughness of the PLLA/GEBMA blends. For the PLLA/GEBMA blown films, the addition of GEBMA significantly improved the flexibility of PLLA/GEBMA blown film. The tear strength reached a maximum of 143.5 kN/m in the machine direction (MD) and 166.7 kN/m in the transverse direction (TD). Moreover, the biodegradation of PLLA was enhanced after blends preparation.

Improved heat resistance properties of poly(l-lactide)/basalt fiber biocomposites with high crystallinity under forming hybrid-crystalline morphology.

In this work, the heat resistance and thermomechanical properties of biodegradable poly(l­lactide) (PLLA) was improved greatly by using short basalt fibers (SBF). The heat deformation temperature (HDT) of PLLA/SBF composites was markedly improved from 62.5 to158.8 °C when its crystallinity was increased from 44.3% to 67.7% after appropriate thermal treatment. Fibers reinforcement and interface crystalline morphology were the two important reasons for the change of in heat deformation and storage modulus of PLLA before and after crystallization. Polarized optical microscopy (POM) demonstrated that the transcrystalline and shish-kebab were successfully induced by SBF, and the "crystalline-network" structure was formed in the composites after isothermal treatment. The PLLA/SBF composites with the formation of interface crystalline had a significantly higher overall heat resistance compared with the common PLLA. As the scanning electron microscope (SEM) analysis, the low values of impact strength might be due to the presence of large spherulites cracks and weak interfacial adhesion.

Porous poly(L-lactic acid) sheet prepared by stretching with starch particles as filler for tissue engineering.

Porous poly(L-lactic acid) (PLLA) sheets were prepared by uniaxial stretching PLLA sheets containing starch filler. Here, the starch filler content, stretching ratio, stretching rate and stretching temperature are important factors to influence the structure of the porous PLLA sheets, therefore, they have been investigated in detail. The pore size distribution and tortuosity were characterized by Mercury Intrusion Porosimetry. The results revealed that the porosity and pore size enlarged with the increase of the starch filler content and stretching ratio, while shrank with the rise of stretching temperature. On the other hand, the pore structure almost had no changes with the stretching rate ranging between 5 and 40 mm/min. In order to test and verify that the porous PLLA sheet was suitable for the tissue engineering, the starch particles were removed by selective enzymatic degradation and its in vitro biocompatibility to osteoblast-like MC3T3-E1 cells was investigated.

Clinical and pathological analysis of the kidney in patients with hypertensive nephropathy.

The aim of the present study was to identify the association between pathological types of kidney and clinical manifestations in patients with hypertensive nephropathy. The blood pressure, fundus, urinalysis test results and renal function changes were analysed in patients who were treated for hypertensive nephropathy. Downward kidney puncture biopsy was performed using a 16G ejection needle with the aid of B ultrasound in 47 cases. The specimens were observed using light microscopy and immunofluorescence. The pathological changes observed in the patients exhibiting symptoms of hypertensive nephropathy varied. The majority of clinical manifestations were benign arteriolar nephrosclerosis, hyaline degeneration of the renal artery and the appearance of a thickened wall of a thickened renal artery wall. Severe cases showed malignant arteriolar nephrosclerosis characterised by fibrinoid necrosis of renal arterioles and intimal hyperplasia. In addition, in the severe cases, fibrinoid necrosis of the afferent arteriole and arcuate artery wall was observed, with severe interlobular artery and arcuate artery myointimal thickening. Renal biopsy in patients with hypertensive nephropathy is safe and feasible. The prognosis and treatment of pathological and clinical disease related to renal pathology is necessary.