Kinetic Evaluation on Lithium Polysulfide in Weakly Solvating Electrolyte toward Practical Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are highly considered as next-generation energy storage techniques. Weakly solvating electrolyte with low lithium polysulfide (LiPS) solvating power promises Li anode protection and improved cycling stability. However, the cathodic LiPS kinetics is inevitably deteriorated, resulting in severe cathodic polarization and limited energy density. Herein, the LiPS kinetic degradation mechanism in weakly solvating electrolytes is disclosed to construct high-energy-density Li-S batteries. Activation polarization instead of concentration or ohmic polarization is identified as the dominant kinetic limitation, which originates from higher charge-transfer activation energy and a changed rate-determining step. To solve the kinetic issue, a titanium nitride (TiN) electrocatalyst is introduced and corresponding Li-S batteries exhibit reduced polarization, prolonged cycling lifespan, and high actual energy density of 381 Wh kg-1 in 2.5 Ah-level pouch cells. This work clarifies the LiPS reaction mechanism in protective weakly solvating electrolytes and highlights the electrocatalytic regulation strategy toward high-energy-density and long-cycling Li-S batteries.

Improving Rate Performance of Encapsulating Lithium-Polysulfide Electrolytes for Practical Lithium-Sulfur Batteries.

The cycle life of high-energy-density lithium-sulfur (Li-S) batteries is severely plagued by the incessant parasitic reactions between Li metal anodes and reactive Li polysulfides (LiPSs). Encapsulating Li-polysulfide electrolyte (EPSE) emerges as an effective electrolyte design to mitigate the parasitic reactions kinetically. Nevertheless, the rate performance of Li-S batteries with EPSE is synchronously suppressed. Herein, the sacrifice in rate performance by EPSE is circumvented while mitigating parasitic reactions by employing hexyl methyl ether (HME) as a co-solvent. The specific capacity of Li-S batteries with HME-based EPSE is nearly not decreased at 0.1 C compared with conventional ether electrolytes. With an ultrathin Li metal anode (50 µm) and a high-areal-loading sulfur cathode (4.4 mgS cm-2 ), a longer cycle life of 113 cycles was achieved in HME-based EPSE compared with that of 65 cycles in conventional ether electrolytes at 0.1 C. Furthermore, both high energy density of 387 Wh kg-1 and stable cycle life of 27 cycles were achieved in a Li-S pouch cell (2.7 Ah). This work inspires the feasibility of regulating the solvation structure of LiPSs in EPSE for Li-S batteries with balanced performance.

Correlating Polysulfide Solvation Structure with Electrode Kinetics towards Long-Cycling Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are promising due to ultrahigh theoretical energy density. However, their cycling lifespan is crucially affected by the electrode kinetics of lithium polysulfides. Herein, the polysulfide solvation structure is correlated with polysulfide electrode kinetics towards long-cycling Li-S batteries. The solvation structure derived from strong solvating power electrolyte induces fast anode kinetics and rapid anode failure, while that derived from weak solvating power electrolyte causes sluggish cathode kinetics and rapid capacity loss. By contrast, the solvation structure derived from medium solvating power electrolyte balances cathode and anode kinetics and improves the cycling performance of Li-S batteries. Li-S coin cells with ultra-thin Li anodes and high-S-loading cathodes deliver 146 cycles and a 338 Wh kg-1 pouch cell undergoes stable 30 cycles. This work clarifies the relationship between polysulfide solvation structure and electrode kinetics and inspires rational electrolyte design for long-cycling Li-S batteries.

Cathode Kinetics Evaluation in Lean-Electrolyte Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries afford great promise on achieving practical high energy density beyond lithium-ion batteries. Lean-electrolyte conditions constitute the prerequisite for achieving high-energy-density Li-S batteries but inevitably deteriorates battery performances, especially the sulfur cathode kinetics. Herein, the polarizations of the sulfur cathode are systematically decoupled to identify the key kinetic limiting factor in lean-electrolyte Li-S batteries. Concretely, an electrochemical impedance spectroscopy combined galvanostatic intermittent titration technique method is developed to decouple the cathodic polarizations into activation, concentration, and ohmic parts. Therein, activation polarization during lithium sulfide nucleation emerges as the dominant polarization as the electrolyte-to-sulfur ratio (E/S ratio) decreases, and the sluggish interfacial charge transfer kinetics is identified as the main reason for degraded cell performances under lean-electrolyte conditions. Accordingly, a lithium bis(fluorosulfonyl)imide electrolyte is proposed to decrease activation polarization, and Li-S batteries adopting this electrolyte provide a discharge capacity of 985 mAh g-1 under a low E/S ratio of 4 µL mg-1 at 0.2 C. This work identifies the key kinetic limiting factor of lean-electrolyte Li-S batteries and provides guidance on designing rational promotion strategies to achieve advanced Li-S batteries.

Electrolyte Design for Improving Mechanical Stability of Solid Electrolyte Interphase in Lithium-Sulfur Batteries.

Practical lithium-sulfur (Li-S) batteries are severely plagued by the instability of solid electrolyte interphase (SEI) formed in routine ether electrolytes. Herein, an electrolyte with 1,3,5-trioxane (TO) and 1,2-dimethoxyethane (DME) as co-solvents is proposed to construct a high-mechanical-stability SEI by enriching organic components in Li-S batteries. The high-mechanical-stability SEI works compatibly in Li-S batteries. TO with high polymerization capability can preferentially decompose and form organic-rich SEI, strengthening mechanical stability of SEI, which mitigates crack and regeneration of SEI and reduces the consumption rate of active Li, Li polysulfides, and electrolytes. Meanwhile, DME ensures high specific capacity of S cathodes. Accordingly, the lifespan of Li-S batteries increases from 75 cycles in routine ether electrolyte to 216 cycles in TO-based electrolyte. Furthermore, a 417 Wh kg-1 Li-S pouch cell undergoes 20 cycles. This work provides an emerging electrolyte design for practical Li-S batteries.

An Organodiselenide Comediator to Facilitate Sulfur Redox Kinetics in Lithium-Sulfur Batteries with Encapsulating Lithium Polysulfide Electrolyte.

Lithium-sulfur (Li-S) batteries are regarded as promising high-energy-density energy storage devices. However, the cycling stability of Li-S batteries is restricted by the parasitic reactions between Li metal anodes and soluble lithium polysulfides (LiPSs). Encapsulating LiPS electrolyte (EPSE) can efficiently suppress the parasitic reactions but inevitably sacrifices the cathode sulfur redox kinetics. To address the above dilemma, a redox comediation strategy for EPSE is proposed to realize high-energy-density and long-cycling Li-S batteries. Concretely, dimethyl diselenide (DMDSe) is employed as an efficient redox comediator to facilitate the sulfur redox kinetics in Li-S batteries with EPSE. DMDSe enhances the liquid-liquid and liquid-solid conversion kinetics of LiPS in EPSE while maintains the ability to alleviate the anode parasitic reactions from LiPSs. Consequently, a Li-S pouch cell with a high energy density of 359 Wh kg-1 at cell level and stable 37 cycles is realized. This work provides an effective redox comediation strategy for EPSE to simultaneously achieve high energy density and long cycling stability in Li-S batteries and inspires rational integration of multi-strategies for practical working batteries.

Regulating Lithium Salt to Inhibit Surface Gelation on an Electrocatalyst for High-Energy-Density Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries have great potential as high-energy-density energy storage devices. Electrocatalysts are widely adopted to accelerate the cathodic sulfur redox kinetics. The interactions among the electrocatalysts, solvents, and lithium salts significantly determine the actual performance of working Li-S batteries. Herein, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), a commonly used lithium salt, is identified to aggravate surface gelation on the MoS2 electrocatalyst. In detail, the trifluoromethanesulfonyl group in LiTFSI interacts with the Lewis acidic sites on the MoS2 electrocatalyst to generate an electron-deficient center. The electron-deficient center with high Lewis acidity triggers cationic polymerization of the 1,3-dioxolane solvent and generates a surface gel layer that reduces the electrocatalytic activity. To address the above issue, Lewis basic salt lithium iodide (LiI) is introduced to block the interaction between LiTFSI and MoS2 and inhibit the surface gelation. Consequently, the Li-S batteries with the MoS2 electrocatalyst and the LiI additive realize an ultrahigh actual energy density of 416 W h kg-1 at the pouch cell level. This work affords an effective lithium salt to boost the electrocatalytic activity in practical working Li-S batteries and deepens the fundamental understanding of the interactions among electrocatalysts, solvents, and salts in energy storage systems.

Toward Practical High-Energy-Density Lithium-Sulfur Pouch Cells: A Review.

Lithium-sulfur (Li-S) batteries promise great potential as high-energy-density energy-storage devices due to their ultrahigh theoretical energy density of 2600 Wh kg-1 . Evaluation and analysis on practical Li-S pouch cells are essential for achieving actual high energy density under working conditions and affording developing directions for practical applications. This review aims to afford a comprehensive overview of high-energy-density Li-S pouch cells regarding 7 years of development and to point out further research directions. Key design parameters to achieve actual high energy density are addressed first, to define the research boundaries distinguished from coin-cell-level evaluation. Systematic analysis of the published literature and cutting-edge performances is then conducted to demonstrate the achieved progress and the gap toward practical applications. Following that, failure analysis as well as promotion strategies at the pouch cell level are, respectively, discussed to reveal the unique working and failure mechanism that shall be accordingly addressed. Finally, perspectives toward high-performance Li-S pouch cells are presented regarding the challenges and opportunities of this field.

Anode Material Options Toward 500 Wh kg-1 Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) battery is identified as one of the most promising next-generation energy storage systems due to its ultra-high theoretical energy density up to 2600 Wh kg-1 . However, Li metal anode suffers from dramatic volume change during cycling, continuous corrosion by polysulfide electrolyte, and dendrite formation, rendering limited cycling lifespan. Considering Li metal anode as a double-edged sword that contributes to ultrahigh energy density as well as limited cycling lifespan, it is necessary to evaluate Li-based alloy as anode materials to substitute Li metal for high-performance Li-S batteries. In this contribution, the authors systematically evaluate the potential and feasibility of using Li metal or Li-based alloys to construct Li-S batteries with an actual energy density of 500 Wh kg-1 . A quantitative analysis method is proposed by evaluating the required amount of electrolyte for a targeted energy density. Based on a three-level (ideal material level, practical electrode level, and pouch cell level) analysis, highly lithiated lithium-magnesium (Li-Mg) alloy is capable to achieve 500 Wh kg-1 Li-S batteries besides Li metal. Accordingly, research on Li-Mg and other Li-based alloys are reviewed to inspire a promising pathway to realize high-energy-density and long-cycling Li-S batteries.

Semi-Immobilized Molecular Electrocatalysts for High-Performance Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries constitute promising next-generation energy storage devices due to the ultrahigh theoretical energy density of 2600 Wh kg-1. However, the multiphase sulfur redox reactions with sophisticated homogeneous and heterogeneous electrochemical processes are sluggish in kinetics, thus requiring targeted and high-efficient electrocatalysts. Herein, a semi-immobilized molecular electrocatalyst is designed to tailor the characters of the sulfur redox reactions in working Li-S batteries. Specifically, porphyrin active sites are covalently grafted onto conductive and flexible polypyrrole linkers on graphene current collectors. The electrocatalyst with the semi-immobilized active sites exhibits homogeneous and heterogeneous functions simultaneously, performing enhanced redox kinetics and a regulated phase transition mode. The efficiency of the semi-immobilizing strategy is further verified in practical Li-S batteries that realize superior rate performances and long lifespan as well as a 343 Wh kg-1 high-energy-density Li-S pouch cell. This contribution not only proposes an efficient semi-immobilizing electrocatalyst design strategy to promote the Li-S battery performances but also inspires electrocatalyst development facing analogous multiphase electrochemical energy processes.

Invasive thymoma extending into the superior vena cava and right atrium: The value of multimodal cardiac magnetic resonance.

The purpose of this case report is to describe the multimodal cardiac magnetic resonance (CMR) imaging features of an invasive thymoma extending into the superior vena cava and right atrium. This unusual case indicates that multimodal CMR can not only reveal the morphological features of thymoma but also enable the identification of histological types, which provides a reasonable surgical plan in the perioperative management. .

Borneol for Regulating the Permeability of the Blood-Brain Barrier in Experimental Ischemic Stroke: Preclinical Evidence and Possible Mechanism.

Borneol, a natural product in the Asteraceae family, is widely used as an upper ushering drug for various brain diseases in many Chinese herbal formulae. The blood-brain barrier (BBB) plays an essential role in maintaining a stable homeostatic environment, while BBB destruction and the increasing BBB permeability are common pathological processes in many serious central nervous system (CNS) diseases, which is especially an essential pathological basis of cerebral ischemic injury. Here, we aimed to conduct a systematic review to assess preclinical evidence of borneol for experimental ischemic stroke as well as investigate in the possible neuroprotective mechanisms, which mainly focused on regulating the permeability of BBB. Seven databases were searched from their inception to July 2018. The studies of borneol for ischemic stroke in animal models were included. RevMan 5.3 was applied for data analysis. Fifteen studies investigated the effects of borneol in experimental ischemic stroke involving 308 animals were ultimately identified. The present study showed that the administration of borneol exerted a significant decrease of BBB permeability during cerebral ischemic injury according to brain Evans blue content and brain water content compared with controls (P < 0.01). In addition, borneol could improve neurological function scores (NFS) and cerebral infarction area. Thus, borneol may be a promising neuroprotective agent for cerebral ischemic injury, largely through alleviating the BBB disruption, reducing oxidative reactions, inhibiting the occurrence of inflammation, inhibiting apoptosis, and improving the activity of lactate dehydrogenase (LDH) as well as P-glycoprotein (P-GP) and NO signaling pathway.

Borneol, a messenger agent, improves central nervous system drug delivery through enhancing blood-brain barrier permeability: a preclinical systematic review and meta-analysis.

To achieve sufficient blood-brain barrier (BBB), penetration is one of the biggest challenges in the development of diagnostic and therapeutic for central nervous system (CNS) disorders. Here, we conducted a systematic review and meta-analysis to assess the preclinical evidence and possible mechanisms of borneol for improving co-administration of CNS drug delivery in animal models. The electronic literature search was conducted in six databases. Fifty-eight studies with 63 comparisons involved 1137 animals were included. Among 47 studies reporting the assessments of CNS drug concentration, 45 studies showed the significant effects of borneol for improving CNS drug delivery (p<.05), whereas 2 studies showed no difference (p>.05). Nineteen comparisons showed borneol up-regulated BBB permeability (p<.05) using brain EB content (n = 8), Rh 123 content (n = 4), brain imaging agent content (n = 2), brain water content (n = 1) and observing ultrastructure of BBB (n = 4), whereas three studies showed no difference or unclear results. Seven studies reported the safety, in which one study showed borneol was reversible changes in the BBB penetration; six studies showed borneol did not increase co-administration of blood drugs concentration of peripheral tissues (p > .05). Effects of borneol are closely associated with inhibition of efflux protein function, releasement of tight junction protein, increasement of vasodilatory neurotransmitters, and inhibition of active transport by ion channels. In conclusion, borneol is a promising candidate for CNS drug delivery, mainly through mediating a multi-targeted BBB permeability.

Decompression plus fusion versus decompression alone for degenerative lumbar spondylolisthesis: a systematic review and meta-analysis.

PURPOSE: To compare the clinical effectiveness of decompression plus fusion and decompression alone for patients with degenerative lumbar spondylolisthesis, a systematic review and meta-analysis of all available evidence was performed. METHODS: A search of the literature was conducted on PubMed/MEDLINE, EMBASE, and the Cochrane Collaboration Library. Relevant studies comparing decompression plus fusion and decompression alone were selected according to eligibility criteria. Predefined endpoints were extracted and meta-analyzed from the identified studies. RESULTS: Four randomized controlled trials and 13 observational studies were eligible. The pooled data revealed that fusion was associated with significantly higher rates of satisfaction and lower leg pain scores when compared with decompression alone. However, fusion significantly increased the intraoperative blood loss, operative time and hospital stay. Both techniques had similar ODI, back pain scores, complication rate, and reoperation rate. CONCLUSIONS: Based on the available evidence, decompression plus fusion maybe be better than decompression alone in the treatment of degenerative spondylolisthesis. Fusion had advantages of improvement of clinical satisfaction, as well as reduction of postoperative leg pain, with similar complication rate to decompression alone.

Sham Electroacupuncture Methods in Randomized Controlled Trials.

Sham electroacupuncture (EA) control is commonly used to evaluate the specific effects of EA in randomized-controlled trials (RCTs). However, establishing an inert and concealable sham EA control remains methodologically challenging. Here, we aimed to systematically investigate the sham EA methods. Eight electronic databases were searched from their inception to April 2015. Ten out of the 17 sham EA methods were identified from 94 RCTs involving 6134 participants according to three aspects: needle location, depth of needle insertion and electrical stimulation. The top three most frequently used types were sham EA type A, type L and type O ordinally. Only 24 out of the 94 trials reported credibility tests in six types of sham EA methods and the results were mainly as follows: sham EA type A (10/24), type B (5/24) and type Q (5/24). Compared with sham EA controls, EA therapy in 56.2% trials reported the specific effects, of which the highest positive rate was observed in type N (3/4), type F (5/7), type D (4/6) and type M (2/3). In conclusion, several sham EA types were identified as a promising candidate for further application in RCTs. Nonetheless, more evidence for inert and concealable sham EA control methods is needed.

Electroacupuncture Exerts Neuroprotection through Caveolin-1 Mediated Molecular Pathway in Intracerebral Hemorrhage of Rats.

Spontaneous intracerebral hemorrhage (ICH) is one of the most devastating types of stroke. Here, we aim to demonstrate that electroacupuncture on Baihui (GV20) exerts neuroprotection for acute ICH possibly via the caveolin-1/matrix metalloproteinase/blood-brain barrier permeability pathway. The model of ICH was established by using collagenase VII. Rats were randomly divided into three groups: Sham-operation group, Sham electroacupuncture group, and electroacupuncture group. Each group was further divided into 4 subgroups according to the time points of 6 h, 1 d, 3 d, and 7 d after ICH. The methods were used including examination of neurological deficit scores according to Longa's scale, measurement of blood-brain barrier permeability through Evans Blue content, in situ immunofluorescent detection of caveolin-1 in brains, western blot analysis of caveolin-1 in brains, and in situ zymography for measuring matrix metalloproteinase-2/9 activity in brains. Compared with Sham electroacupuncture group, electroacupuncture group has resulted in a significant improvement in neurological deficit scores and in a reduction in Evans Blue content, expression of caveolin-1, and activity of matrix metalloproteinase-2/9 at 6 h, 1 d, 3 d, and 7 d after ICH (P < 0.05). In conclusion, the present results suggested that electroacupuncture on GV20 can improve neurological deficit scores and reduce blood-brain barrier permeability after ICH, and the mechanism possibly targets caveolin-1/matrix metalloproteinase/blood-brain barrier permeability pathway.