Factors associated with willingness to receive coronavirus disease vaccination during the pandemic: A nationwide survey in Taiwan.

BACKGROUND/PURPOSE: Vaccination is the most important preventive measure to protect people from coronavirus disease 2019 (COVID-19). Governments worldwide have prioritized their vaccination policy against COVID-19. However, there is a lack of relevant research on Taiwanese attitudes and considerations toward COVID-19 vaccination. This study aimed to investigate the cognition, preventive behaviors, and attitudes toward COVID-19 vaccines that influence people's willingness to get vaccinated in Taiwan. METHODS: From October 1 to 31, 2021, a computer-assisted telephone interview system was used to randomly select Taiwanese people to investigate their COVID-19 preventive behaviors, knowledge, and willingness to be vaccinated. RESULTS: We included 2000 participants of whom 96.45% showed vaccination willingness. The overall mean age and knowledge scores were 48.6 years and 5.78, respectively. All of the participants chose to wear masks, and 80% chose to be vaccinated to prevent COVID-19. Compared with the non-willing vaccination participants, those with younger ages, higher incomes, and higher knowledge scores regarding masks and vaccination were more likely to be vaccinated. Furthermore, apprehensions about vaccine side effects and negative news about COVID-19 vaccines were the major reasons for vaccination hesitancy. CONCLUSION: To improve people's willingness to get vaccinated, the government should strive to deliver correct knowledge and refute inappropriate negative information about COVID-19 vaccination. Moreover, recommendation by physicians was an important factor for older individuals to decide on receiving the COVID-19 vaccine, and policies could be implemented from this aspect.

Application of near-infrared spectroscopy to assess the effect of the cupping size on the spatial hemodynamic response from the area inside and outside the cup of the biceps.

Cupping therapy is a popular intervention for improving muscle recovery after exercise although clinical evidence is weak. Previous studies demonstrated that cupping therapy may improve microcirculation of the soft tissue to accelerate tissue healing. However, it is unclear whether the cupping size could affect the spatial hemodynamic response of the treated muscle. The objective of this study was to use 8-channel near-infrared spectroscopy to assess this clinical question by assessing the effect of 3 cupping sizes (35, 40, and 45 mm in inner diameter of the circular cup) under -300 mmHg for 5 min on the muscle hemodynamic response from the area inside and outside the cup, including oxyhemoglobin and deoxy-hemoglobin in 18 healthy adults. Two-way factorial design was used to assess the interaction between the cupping size (35, 40, and 45 mm) and the location (inside and outside the cup) and the main effects of the cupping size and the location. The two-way repeated measures ANOVA demonstrated an interaction between the cupping size and the location in deoxy-hemoglobin (P = 0.039) but no interaction in oxyhemoglobin (P = 0.100), and a main effect of the cup size (P = 0.001) and location (P = 0.023) factors in oxyhemoglobin. For the cupping size factor, the 45-mm cup resulted in a significant increase in oxyhemoglobin (5.738±0.760 µM) compared to the 40-mm (2.095±0.312 µM, P<0.001) and 35-mm (3.134±0.515 µM, P<0.01) cup. Our findings demonstrate that the cupping size and location factors affect the muscle hemodynamic response, and the use of multi-channel near-infrared spectroscopy may help understand benefits of cupping therapy on managing musculoskeletal impairment.

Successful Treatment of Severe Case of Lipid Overload Syndrome with Pancreatitis and Pneumonia: A Case Report.

Background: Fat overload syndrome is a rare and severe adverse reaction triggered by the infusion of a single source of lipid emulsion, resulting in elevated blood triacylglycerol (TG) levels. The majority of literature reports focus on cases of fat overload syndrome in patients with mild symptoms. This case is significant because it demonstrates the diagnostic and therapeutic experience and provide valuable insights for the management for severe fat overload syndrome. Case Presentation: We present a case report of a female patient who developed fat overload syndrome following prolonged and excessive infusion of lipid emulsion after colon resection surgery. In the setting of compromised immune function and malnutrition, the patient's pulmonary infection and respiratory distress symptoms have further exacerbated. Hence, in addition to severe pancreatitis, the patient has also contracted severe pneumonia. Upon admission, tracheal intubation, plasma exchange and blood perfusion were performed. Subsequently, comprehensive treatment was provided, including anti-infection, antispasmodic, acid suppression, enzyme inhibition, as well as targeted supportive measures to stabilize electrolytes and nutritional status. After treatment, there was a progressive reduction in blood lipid levels. After assessing the relevant risks, it was deemed necessary to perform an emergency computed tomography (CT)-guided percutaneous drainage tube placement procedure targeting the necrotic area of the pancreas while the patient was still intubated. Finally, the patient was discharged from the hospital. Conclusion: The case highlights the association between fat overload syndrome and pancreatitis as well as the use of lipid emulsions and suggests the treatment strategies for severe fat overload syndrome.

Arbitrary engineering of spatial caustics with 3D-printed metasurfaces.

Caustics occur in diverse physical systems, spanning the nano-scale in electron microscopy to astronomical-scale in gravitational lensing. As envelopes of rays, optical caustics result in sharp edges or extended networks. Caustics in structured light, characterized by complex-amplitude distributions, have innovated numerous applications including particle manipulation, high-resolution imaging techniques, and optical communication. However, these applications have encountered limitations due to a major challenge in engineering caustic fields with customizable propagation trajectories and in-plane intensity profiles. Here, we introduce the "compensation phase" via 3D-printed metasurfaces to shape caustic fields with curved trajectories in free space. The in-plane caustic patterns can be preserved or morphed from one structure to another during propagation. Large-scale fabrication of these metasurfaces is enabled by the fast-prototyping and cost-effective two-photon polymerization lithography. Our optical elements with the ultra-thin profile and sub-millimeter extension offer a compact solution to generating caustic structured light for beam shaping, high-resolution microscopy, and light-matter-interaction studies.

Insights into spinach domestication from genome sequences of two wild spinach progenitors, Spinacia turkestanica and Spinacia tetrandra.

Cultivated spinach (Spinacia oleracea) is a dioecious species. We report high-quality genome sequences for its two closest wild relatives, Spinacia turkestanica and Spinacia tetrandra, which are also dioecious, and are used to study the genetics of spinach domestication. Using a combination of genomic approaches, we assembled genomes of both these species and analyzed them in comparison with the previously assembled S. oleracea genome. These species diverged c. 6.3 million years ago (Ma), while cultivated spinach split from S. turkestanica 0.8 Ma. In all three species, all six chromosomes include very large gene-poor, repeat-rich regions, which, in S. oleracea, are pericentromeric regions with very low recombination rates in both male and female genetic maps. We describe population genomic evidence that the similar regions in the wild species also recombine rarely. We characterized 282 structural variants (SVs) that have been selected during domestication. These regions include genes associated with leaf margin type and flowering time. We also describe evidence that the downy mildew resistance loci of cultivated spinach are derived from introgression from both wild spinach species. Collectively, this study reveals the genome architecture of spinach assemblies and highlights the importance of SVs during the domestication of cultivated spinach.

Physical function as a predictor of chemotherapy-induced peripheral neuropathy in patients with pancreatic cancer.

BACKGROUND: A growing body of research indicates that poor functional status before chemotherapy may be correlated with the severity of chemotherapy-induced peripheral neuropathy (CIPN) after the neurotoxic treatment. However, little is known about the associations between pre-chemotherapy physical function and CIPN in patients with pancreatic cancer. PURPOSE: To identify the predictors of CIPN in relation to pre-chemotherapy physical function in patients with pancreatic cancer. METHODS: This secondary analysis included data from patients with pancreatic cancer who participated in a longitudinal research study at National Cheng Kung University Hospital, Tainan, Taiwan. Four physical function tests (i.e., grip strength, Timed Up and Go (TUG), 2-minute step test (2MST), and Romberg test) and two questionnaires (The European Organisation for Research and Treatment of Cancer Quality of Life Questionnaire Core 30 [EORTC QLQ-C30] and Chemotherapy-Induced Peripheral Neuropathy Module [CIPN20]) were assessed at baseline (i.e., before first chemotherapy session) and 2-, 3-, 4-, and 6-month follow-up. Multiple linear regression with adjustment for confounding factors was used to assess the associations between the four functional tests at baseline and the CIPN20 total score and individual subscale scores (sensory, motor, and autonomic) at 6-month follow-up. RESULTS: Data from a total of 209 pancreatic cancer patients (mean age: 64.4 years, 54.5% male) were analyzed. The findings showed that the severity of CIPN at 6-month follow-up was significantly associated with the baseline TUG completion time (ß = 0.684, p = 0.003). The TUG completion time was also positively correlated with the 6-month CIPN sensory and autonomic subscales. In addition, a baseline positive Romberg test (ß = 0.525, p = 0.009) was a significant predictor of the severity of motor neuropathy at 6-month follow-up. CONCLUSION: The TUG completion time and positive Romberg test before chemotherapy may be predictive factors of the CIPN severity 6 months after the commencement of chemotherapy. Accordingly, the incorporation of TUG and Romberg tests into the clinical assessment protocol emerges as imperative for individuals diagnosed with pancreatic carcinoma undergoing chemotherapy regimens.

Reconstruction of a three-dimensional temperature field in flames based on ES-ResNet18.

Currently, the method of establishing the correspondence between the flame light field image and the temperature field by deep learning is widely used. Based on convolutional neural networks (CNNs), the reconstruction accuracy has been improved by increasing the depth of the network. However, as the depth of the network increases, it will lead to gradient explosion and network degradation. To further improve the reconstruction accuracy of the flame temperature field, this paper proposes an ES-ResNet18 model, in which SoftPool is used instead of MaxPool to preserve feature information more completely and efficient channel attention (ECA) is introduced in the residual block to reassign more weights to feature maps of critical channels. The reconstruction results of our method were compared with the CNN model and the original ResNet18 network. The results show that the average relative error and the maximum relative error of the temperature field reconstructed by the ES-ResNet18 model are 0.0203% and 0.1805%, respectively, which are reduced by one order of magnitude compared to the CNN model. Compared to the original ResNet18 network, they have decreased by 17.1% and 43.1%, respectively. Adding Gaussian noise to the flame light field images, when the standard deviation exceeds 0.03, the increase in reconstruction error of the ES-ResNet18 model is lower than that of ResNet18, demonstrating stronger anti-noise performance.

Globular adiponectin induces esophageal adenocarcinoma cell pyroptosis via the miR-378a-3p/UHRF1 axis.

BACKGROUND: Antiapoptosis is a major factor in the resistance of tumor cells to chemotherapy and radiotherapy. Thus, activation of cell pyroptosis may be an effective option to deal with antiapoptotic cancers such as esophageal adenocarcinoma (EAC). METHODS: Differential expression of ubiquitin-like versus PHD and ring finger structural domain 1 (UHRF1) in EAC and near normal tissues was analyzed, as well as the prognostic impact on survival in EAC. Also, the same study was done for globular adiponectin (gAD). Simultaneously, the mRNA expression of UHRF1 was observed in different EAC cell lines. Real time cellular analysis (RTCA) was used to detect cell proliferation, and flow cytometry and inverted fluorescence microscopy were used to detect pyroptosis. Biocredit analysis was conducted to observe the correlation between UHRF1 and key pyroptosis proteins. OD values and CCK8 assay were used to determine the effect of miR-378a-3p on EAC cells. Quantitative real-time polymerase chain reaction and Western blot were used to detect the correlation between UHRF1, gAD, and miR-378a-3p in EAC cells. Moreover, in vivo and in vitro experiments were performed to detect the relevant effects on tumor migration and invasion after inhibiting UHRF1 expression. RESULTS: UHRF1 was negatively correlated with the survival of patients with EAC, while miR-378a-3p showed the opposite effect. Additionally, gAD promoted EAC cell pyroptosis, upregulated miR-378a-3p, and significantly inhibited the proliferation of EAC cells. gAD directly reduced UHRF1 expression in EAC cells by upregulating miR-378a-3p. In cell migration and invasion assays, inhibition of UHRF1 expression significantly suppressed EAC cell metastasis. In animal experiments, we again demonstrated that gAD induced pyroptosis in EAC cells by inhibiting the expression of UHRF1. CONCLUSION: gAD-induced upregulation of miR-378a-3p significantly inhibited the proliferation of EAC by targeting UHRF1. Therefore, gAD may serve as an alternative therapy for chemotherapy- and radiation-refractory EAC or other cancers with the same mechanism of pyroptosis action.

Modified three-layer vesicourethral reconstruction in robot-assisted radical prostatectomy can change cystography pattern and improve early recovery of continence.

BACKGROUND AND OBJECTIVES: To determine early continence outcomes after three-layer vesicourethral reconstruction during robot-assisted radical prostatectomy (RARP) and the role of postoperative cystography pattern. METHODS: Between May 2015 and January 2019, a total of 170 consecutive patients with localized prostate cancer who underwent RARP, were divided into one- and three-layer groups based on the method of vesicourethral reconstruction. Continent status, preoperative, intraoperative, postoperative, clinicopathological variables, and cystography parameters were analyzed. The patients were followed up for at least 12 months. RESULTS: Of the 170 consecutive patients, 85 with one-layer vesicourethral anastomosis, and 85 with three-layer reconstruction. The continence rates immediately after catheter removal, 4, 12, and 24 weeks after RARP were 47.1%, 75.3%, 92.9%, and 98.8% in the three-layer group; compared to 15.3%, 60%, 78.8%, and 90.6% in the one-layer group, respectively. In the multivariate analysis, three-layer reconstruction was the only independent variable with a 42% risk reduction of postprostatectomy incontinence (hazard ratio (HR): 0.58, 95% confidence interval (CI) = 0.42-0.80, p = 0.001). Cystography in the three-layer group revealed less anastomotic leakage, less sharp bladder neck angle, and higher bladder neck level category. CONCLUSIONS: Three-layer anatomical reconstruction demonstrated promising early continence outcomes, and postoperative cystography revealed a specific pattern more associated with continence.

The usage of dental cone-beam computed tomography during the COVID-19 pandemic (from 2020 to 2022): A survey of a regional hospital in the northern Taiwan.

Background/purpose: In Taiwan, cone-beam computed tomography (CBCT) has already widely used in dentistry. This study explored preliminarily the usage of dental CBCT during the COVID-19 pandemic (from 2020 to 2022) through a survey of a regional hospital in the northern Taiwan. Materials and methods: This study used purposeful sampling to select a regional hospital in the northern Taiwan to survey its usage of dental CBCT during the COVID-19 pandemic. Results: In the surveyed hospital, the number of patients' visits for the usage of dental CBCT increased from 355 in 2020 to 449 in 2021 and further to 488 in 2022 with a growth rate of 37.46 %, while the growth rates compared to the previous year were 26.48 % in 2021 and 8.69 % in 2022, respectively. There were a total of 1292 patients' visits for the dental CBCT. The ages of the 1292 patients (573 males and 719 females) ranged from 4 to 89 years. The 50-59-year age group had the highest number of patients' visits (371, 28.72 %), followed in a descending order by the 60-69-year (293, 22.68 %) and 40-49-year (206, 15.94 %) age groups. The dental CBCT was used mainly for the assessment of dental implants, accounting for 1148 (78.85 %) of the total 1456 irradiations. Conclusion: During the COVID-19 pandemic, the medical services for dental care and treatments in Taiwan are still maintained normally, and the dental CBCT is also used widely and popularly by the dental patients of all ages, various dental procedures, and various dental specialties.

Effect of 3D printing technology-assisted TKA on cartilage tissue in rabbit with knee osteoarthritis.

BACKGROUND: Knee osteoarthritis (KOA) is a common chronic degenerative joint disease. 3D printing technology has become one of the important directions of medical development along with individualized precision treatment in orthopedics. OBJECTIVE: To investigate the effect of 3D printing technology-assisted total knee arthroplasty (TKA) on cartilage in rabbits with KOA. METHODS: A rabbit model of KOA was established and treated by TKA or 3D printing-assisted TKA. Four weeks after treatment, radiological evaluation of rabbit knees was performed by X-ray examination, in order to observe the severity of osteoarthritic lesions. Then the knee joints of rabbits were collected for Hematoxylin-eosin, Toluidine blue, and Safranin O-Fast green staining. The expressions of cartilage matrix metabolism-related and apoptosis-related genes were scrutinized by real-time quantitative reverse transcription-polymerase chain reaction, Western blot, and immunohistochemistry. The levels of inflammatory-related factors in the cartilage tissues of rabbits were tested by enzyme-linked immunosorbent assay. RESULTS: In rabbits with KOA, 3D printing technology-assisted TKA alleviated the inflammation and bone remodeling of the knee joint, relieved synovial hyperplasia and inflammatory cell infiltration in the articular cartilage, reduced articular cartilage degradation, suppressed cartilage matrix metabolism, and mitigated the inflammatory response and apoptosis of cartilage cells. CONCLUSION: 3D printing technology-assisted TKA exhibits a good treatment effect in rabbit KOA. This study provides an important basis for the clinical application of 3D printing technology-assisted TKA in KOA treatment.