RESUMEN
Tryptophan metabolites, such as 5-hydroxytryptophan (5-HTP), serotonin, and melatonin, hold significant promise as supplements for managing various mood-related disorders, including depression and insomnia. However, their chemical production via chemical synthesis and phytochemical extraction presents drawbacks, such as the generation of toxic byproducts and low yields. In this study, we explore an alternative approach utilizing S. cerevisiae STG S101 for biosynthesis. Through a series of eleven experiments employing different combinations of tryptophan supplementation, Tween 20, and HEPES buffer, we investigated the production of these indolamines. The tryptophan metabolites were analyzed using liquid chromatography with tandem mass spectrometry (LC-MS/MS). Notably, setups replacing peptone in the YPD media with tryptophan (Run 3) and incorporating tryptophan along with 25 mM HEPES buffer (Run 4) demonstrated successful biosynthesis of 5-HTP and serotonin. The highest 5-HTP and serotonin concentrations were 58.9 ± 16.0 mg L-1 and 0.0650 ± 0.00211 mg L-1, respectively. Melatonin concentrations were undetected in all the setups. These findings underscore the potential of using probiotic yeast strains as a safer and conceivably more cost-effective alternative for indolamine synthesis. The utilization of probiotic strains presents a promising avenue, potentially offering scalability, sustainability, reduced environmental impact, and feasibility for large-scale production.
Asunto(s)
5-Hidroxitriptófano , Vías Biosintéticas , Saccharomyces cerevisiae , Serotonina , Triptófano , Triptófano/metabolismo , Saccharomyces cerevisiae/metabolismo , Serotonina/metabolismo , Serotonina/biosíntesis , 5-Hidroxitriptófano/metabolismo , Melatonina/metabolismo , Melatonina/biosíntesis , Espectrometría de Masas en Tándem , Cromatografía Liquida/métodosRESUMEN
This study investigated the spatiotemporal variation and source characteristics of volatile organic compounds (VOCs) in Kaohsiung Harbor, one of the busiest ports in the world. The VOCs' potential to form ozone (O3) and secondary organic aerosols (SOAs) was also examined. The temporal variation was studied in February, May, July, and November of 2020, while the spatial distribution was investigated in the export processing zone (KEPZ) and at the two port entrances (E1 and E2). The most polluted month in the harbor was November (37.7 ± 12.6 ppbv), while the most polluted site was the industrial area (KEPZ). A significant positive correlation was found between VOCs and O3 (r = 0.985). Meanwhile, a moderate positive correlation (r = 0.449) was observed between VOCs and secondary organic aerosol formation potential (SOAFP), mainly affected by the concentration of toluene in the study area. The diagnostic ratios indicated that the air parcels in the site were "fresh," and three possible ambient sources of VOC were identified by the positive matrix factorization (PMF): industrial emissions (53.6%), freight transport emissions (29.6%), and others (17.7%). The study highlights the current state of VOCs and their potential sources in the port city of Kaohsiung, which can be used to enhance the strategies for regulating and controlling industrial activities and improving air pollution control measures to reduce VOC emissions.
Asunto(s)
Contaminantes Atmosféricos , Ozono , Compuestos Orgánicos Volátiles , Contaminantes Atmosféricos/análisis , Emisiones de Vehículos/análisis , Compuestos Orgánicos Volátiles/análisis , Monitoreo del Ambiente , Ciudades , Ozono/análisis , ChinaRESUMEN
This study developed and examined the application of bismuth sulfide doped on graphitic carbon nitride (Bi2S3@g-C3N4) in the degradation of NO under solar irradiation. Bi2S3@g-C3N4 was prepared through the calcination method. The morphological structure and chemical properties of the synthesized photocatalyst were analyzed before the degradation tests. After doping with Bi2S3@g-C3N4, the bandgap was reduced to 2.76 eV, which increased the absorption of solar light. As a result, the Bi2S3@g-C3N4 achieved higher NO degradation (55%) compared to pure Bi2S3 (35%) and g-C3N4 (45%). The trapping test revealed that the electrons were the primary species responsible for most of the NO degradation. The photocatalyst was stable under repeated solar irradiation, maintaining degradation efficiencies of 50% after five consecutive recycling tests. The present work offers strong evidence that Bi2S3@g-C3N4 is a stable and efficient catalyst for the photocatalytic oxidation of NO over solar irradiation.
RESUMEN
This study presents the real-time energy consumption of a container ship's generator engine on two round-trips from the West Coast of the US to the East Asian ports and analyzes the ship's PM10, PM2.5, NOx, SOx, CO, and HC emissions, shore power usage, and factors affecting energy consumption. The average total energy consumption and air emissions for the two round trips were 1.72 GWh and 42.1 tons, respectively. The transpacific crossing segment had the highest average energy consumption (2848 ± 361 kWh) and pollutant emission rate (78.9 ± 10.0 kg h-1). On the other hand, the West Coast of the US had the least energy consumption due to shore power adoption. Furthermore, switching from heavy fuel oil (HFO) to ultra-low-sulfur fuel oil (ULSFO) greatly reduced the emissions of PM and SOx by > 96% and NOx by 17.0%. However, CO and HC increased by 16.9% and 36.1%, respectively, implying incomplete combustion. In addition, the energy consumption was influenced by the number of reefers and wind. Therefore, this study recommends further research on energy-efficient reefers, generator engine optimization, and shore power adoption to reduce emissions from container ships.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Aceites Combustibles , Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Navíos , Emisiones de Vehículos/análisisRESUMEN
This review investigates the findings of the most up-to-date literature on bioremediation via composting technology. Studies on bioremediation via composting began during the 1990s and have exponentially increased over the years. A total of 655 articles have been published since then, with 40% published in the last six years. The robustness, low cost, and easy operation of composting technology make it an attractive bioremediation strategy for organic contaminants prevalent in soils and sediment. Successful pilot-and large-scale bioremediation of organic contaminants, e.g., total petroleum hydrocarbons, plasticizers, and persistent organic pollutants (POPs) by composting, has been documented in the literature. For example, composting could remediate >90% diesel with concentrations as high as 26,315 mg kg-a of initial composting material after 24 days. Composting has unique advantages over traditional single- and multi-strain bioaugmentation approaches, including a diverse microbial community, ease of operation, and the ability to handle higher concentrations. Bioremediation via composting depends on the diverse microbial community; thus, key parameters, including nutrients (C/N ratio = 25-30), moisture (55-65%), and oxygen content (O2 > 10%) should be optimized for successful bioremediation. This review will provide bioremediation and composting researchers with the most recent finding in the field and stimulate new research ideas.
Asunto(s)
Compostaje/métodos , Sedimentos Geológicos/química , Contaminantes del Suelo/química , Biodegradación Ambiental , Hidrocarburos/análisis , Publicaciones Periódicas como Asunto/tendencias , Plaguicidas/análisis , Petróleo/análisisRESUMEN
Mycoremediation of unsterilized PCDD/F-contaminated field soil was successfully demonstrated by solid-state fermentation coupled with Pleurotus pulmonarius utilizing a patented incubation approach. The experiments were carried out in four setups with two as controls. The contaminated soil was homogenously mixed with solid inocula, 1:0.5 dry w/w, resulting in an initial concentration of 4432 ± 623 ng WHO-TEQ kg-1. After a 30-day incubation under controlled conditions, the overall removal (approx. 60%) was non-specific. The removal was attributed to degradation by extracellular ligninolytic enzymes and uptake into the fruiting tissue (~110 ng WHO-TEQ kg-1 of mushroom). Furthermore, less recalcitrant chlorinated metabolites were found, implying ether bond cleavage and dechlorination happened during the mycoremediation. These metabolites resulted from the complex interaction between P. pulmonarius and the indigenous microbes from the unsterilized soil. This study provides a new step toward scaling up this mycoremediation technique to treat unsterilized PCDD/F-contaminated field soil.
Asunto(s)
Benzofuranos , Dibenzodioxinas Policloradas , Contaminantes del Suelo , Benzofuranos/análisis , Dibenzofuranos Policlorados , Pleurotus , Dibenzodioxinas Policloradas/análisis , Suelo , Contaminantes del Suelo/análisisRESUMEN
The human health risks caused by heavy metal contamination (As, Cd, Cr, Cu, Hg, Pb, Ni, and Zn) in the surface water of the Houjing River, the most contaminated river in southern Taiwan, were assessed in this study. Firstly, heavy metal contamination was evaluated by the contamination factors (CF) and the metal indexes (MI). Secondly, the human health risks due to heavy metal contamination were simulated using the Adaptive Risk Assessments Modeling System (ARAMS) through three scenarios; fish ingestion, dermal water contact, and incidental water ingestion during swimming. The hazard quotient (HQ) and the hazard index (HI) were used to evaluate non-carcinogenic risks, while carcinogenic risks were estimated by the lifetime cancer incidence risk index (CR) and the cumulative cancer risk (CCR). The results showed that the synergistic contamination of heavy metals in the surface water was severe (MI = 12.4), with the highest contribution from Cu, Ni, and Pb. Copper had the highest non-carcinogenic risk at the "adverse effect" level, while Ni and Cr had the highest carcinogenic risk at an "unacceptable" level. In addition, the cumulative risks of fish ingestion (HIFI = 6.75 and CCRFI = 1.25E-03) were significantly higher than those of the swimming scenarios (HI(DC + WI) = 1.94E-03 and CCR(DC + WI) = 9.32E-08). The results from this study will be beneficial for immediate and future contamination control measures and human health management plans for this study area. This study has also demonstrated the effectiveness of using ARAMS in human health risk assessment.
Asunto(s)
Metales Pesados , Ríos , Animales , China , Monitoreo del Ambiente , Humanos , Industrias , Metales Pesados/análisis , Medición de RiesgoRESUMEN
The overall dioctyl terephthalate (DOTP) degradation efficiency during food waste composting was 98%. The thermophilic phases contributed to 76% of the overall degradation efficiency, followed by the maturation phase (22%), then the mesophilic phase (0.7%). The thermophilic phase had the highest specific degradation rate of 0.149 d-1. The progression of the bacterial community during the composting process was investigated to understand DOTP biodegradation. The results showed that the bacterial richness and the alpha diversity of the DOTP composting were similar to a typical composting process, indicating that the high concentration of DOTP did not hinder the thriving and evolution of the bacterial community. Additionally, Firmicutes was the most dominant at the phylum level, followed by Proteobacteria and Bacteroidetes. Bacilli was the most dominant class (70%) in the mesophilic phase, with the abundance decreasing thereafter in the thermophilic and maturation phase. Moreover, Lactobacillus sp. was the dominant species at the beginning of the experiment, which was probably responsible for DOTP biodegradation. The high removal efficiency observed in the maturation phase indicates that degradation occurs in all the composting phases, and that compost can be used to enhance natural attenuation. These findings provide a better understanding of the bacterial communities during biodegradation of DOTP and plasticizers via food waste composting and should facilitate the development of appropriate green bioremediation technologies.
Asunto(s)
Compostaje , Eliminación de Residuos , Alimentos , Ácidos Ftálicos , Suelo , Microbiología del SueloRESUMEN
This article provides a comprehensive review on aerobic composting remediation of soil contaminated with total petroleum hydrocarbons (TPHs). The studies reviewed have demonstrated that composting technology can be applied to treat TPH contamination (as high as 380,000 mg kg-1) in clay, silt, and sandy soils successfully. Most of these studies reported more than 70% removal efficiency, with a maximum of 99%. During the composting process, the bacteria use TPHs as carbon and energy sources, whereas the fungi produce enzymes that can catalyze oxidation reactions of TPHs. The mutualistic and competitive interactions between the bacteria and fungi are believed to sustain a robust biodegradation system. The highest biodegradation rate is observed during the thermophilic phase. However, the presence of a diverse and dynamic microbial community ensures that TPH degradation occurs in the entire composting process. Initial concentration, soil type, soil/compost ratio, aeration rate, moisture content, C/N ratio, pH, and temperature affect the composting process and should be monitored and controlled to ensure successful degradation. Nevertheless, there is insufficient research on optimizing these operational parameters, especially for large-scale composting. Also, toxic and odorous gas emissions during degradation of TPHs, usually unaddressed, can be potential air pollution sources and need further insightful characterization and mitigation/control research.
Asunto(s)
Compostaje , Petróleo , Contaminantes del Suelo , Biodegradación Ambiental , Hidrocarburos , Suelo , Microbiología del SueloRESUMEN
A typical two-day start-up of municipal solid waste incinerators (MSWIs) can yield polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) and polychlorinated biphenyl (PCB) emission quantities around 10 times higher than those from an entire year of normal operations, as measured in this study. Thus, we tested specific control strategies for inhibiting the formation of chlorinated persistent organic pollutants (Cl-POPs), namely, extensively cleaning the ash accumulated beneath the furnace bed of the combustion chamber and deposited on the walls of the superheater and economizer and shortening the residence time of the flue gas in the optimal temperature window for Cl-POP formation. Also, we advanced the injection times of the activated carbon and lime slurry to lower Cl-POP emissions during start-up. Our findings show that these strategies were highly effective and reduced the Cl-POP emissions by > 98%, most of which (96.4-98.2%) was attributable to inhibiting formation. In summary, the proposed control strategies require no modifications to existing air pollution control devices, have little influence on operational cost, and are effective and feasible for the majority of MSWIs.
Asunto(s)
Contaminantes Atmosféricos , Contaminantes Ambientales , Dibenzodioxinas Policloradas , Contaminantes Atmosféricos/análisis , Dibenzofuranos Policlorados/análisis , Monitoreo del Ambiente , Incineración , Dibenzodioxinas Policloradas/análisis , Residuos SólidosRESUMEN
As yet, the effect of biodiesels on the emissions of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from heavy-duty diesel engines (HDDEs) has only been studied using limited fuel blend ratios. To clarify the influence of using higher fractions of biodiesel on the emissions of toxic organic pollutants from diesel engines, in this research, the emissions of PM, PAHs, and persistent organic pollutants (POPs) from EURO IV and EURO III HDDEs fueled by low to high waste cooking oil (WCO)-based biodiesel-petrodiesel fuel blends were studied, including D100 (0% biodiesel), B20 (20%), B40 (40%), B60 (60%), B80 (80%), and B100 (100%). The engines were tested according to the US FTP-75 test procedure. The results for the EURO IV diesel engine showed that the PM and toxic organic pollutant emissions were reduced with increases in the blending ratio up until the B60 scenario when compared to the D100 scenario. This is because biodiesel has higher oxygen content and no or lower aromatic content than petrodiesel. Nevertheless, during the B80 and B100 scenarios, the PM and toxic organic pollutant emissions increased due to the high viscosity property of biodiesel, which negatively affected the combustion process. The biodiesel effect on the emissions from EURO III engine was more pronounced because of its lower combustion efficiency, and therefore the improvement in combustion using biodiesel resulted in greater PCDD/F reductions.