RESUMEN
OBJECTIVES: To compare implant supported crowns (ISCs) designed using deep learning (DL) software with those designed by a technician using conventional computer-aided design software. METHODS: Twenty resin-based partially edentulous casts (maxillary and mandibular) used for fabricating ISCs were evaluated retrospectively. ISCs were designed using a DL-based method with no modification of the as-generated outcome (DB), a DL-based method with further optimization by a dental technician (DM), and a conventional computer-aided design method by a technician (NC). Time efficiency, crown contour, occlusal table area, cusp angle, cusp height, emergence profile angle, occlusal contacts, and proximal contacts were compared among groups. Depending on the distribution of measured data, various statistical methods were used for comparative analyses with a significance level of 0.05. RESULTS: ISCs in the DB group showed a significantly higher efficiency than those in the DM and NC groups (P ≤ 0.001). ISCs in the DM group exhibited significantly smaller volume deviations than those in the DB group when superimposed on ISCs in the NC group (DB-NC vs. DM-NC pairs, P ≤ 0.008). Except for the number and intensity of occlusal contacts (P ≤ 0.004), ISCs in the DB and DM groups had occlusal table areas, cusp angles, cusp heights, proximal contact intensities, and emergence profile angles similar to those in the NC group (P ≥ 0.157). CONCLUSIONS: A DL-based method can be beneficial for designing posterior ISCs in terms of time efficiency, occlusal table area, cusp angle, cusp height, proximal contact, and emergence profile, similar to the conventional human-based method. CLINICAL SIGNIFICANCE: A deep learning-based design method can achieve clinically acceptable functional properties of posterior ISCs. However, further optimization by a technician could improve specific outcomes, such as the crown contour or emergence profile angle.
Asunto(s)
Diseño Asistido por Computadora , Coronas , Aprendizaje Profundo , Oclusión Dental , Diseño de Prótesis Dental , Prótesis Dental de Soporte Implantado , Humanos , Estudios Retrospectivos , Diseño de Prótesis Dental/métodos , Programas Informáticos , Arcada Parcialmente Edéntula/rehabilitación , Implantes DentalesRESUMEN
This study aimed to investigate the effects of sandblasting on the physical properties and bond strength of two types of translucent zirconia: niobium-oxide-containing yttria-stabilized tetragonal zirconia polycrystals ((Y, Nb)-TZP) and 5 mol% yttria-partially stabilized zirconia (5Y-PSZ). Fully sintered disc specimens were either sandblasted with 125 µm alumina particles or left as-sintered. Surface roughness, crystal phase compositions, and surface morphology were explored. Biaxial flexural strength (n=10) and shear bond strength (SBS) (n=12) were evaluated, including thermocycling conditions. Results indicated a decrease in flexural strength of 5Y-PSZ from 601 to 303 MPa upon sandblasting, while (Y, Nb)-TZP improved from 458 to 544 MPa. Both materials significantly increased SBS after sandblasting (p<0.001). After thermocycling, (Y, Nb)-TZP maintained superior SBS (14.3 MPa) compared to 5Y-PSZ (11.3 MPa) (p<0.001). The study concludes that (Y, Nb)-TZP is preferable for sandblasting applications, particularly for achieving durable bonding without compromising flexural strength.
Asunto(s)
Materiales Dentales , Niobio , Óxidos , Materiales Dentales/química , Ensayo de Materiales , Propiedades de Superficie , Circonio/química , Itrio/química , Óxido de Aluminio , Resistencia al CorteRESUMEN
OBJECTIVES: This study compared the tooth morphology, internal fit, occlusion, and proximal contacts of dental crowns automatically generated via two deep learning (DL)-based dental software systems with those manually designed by an experienced dental technician using conventional software. METHODS: Thirty partial arch scans of prepared posterior teeth were used. The crowns were designed using two DL-based methods (AA and AD) and a technician-based method (NC). The crown design outcomes were three-dimensionally compared, focusing on tooth morphology, internal fit, occlusion, and proximal contacts, by calculating the geometric relationship. Statistical analysis utilized the independent t-test, Mann-Whitney test, one-way ANOVA, and Kruskal-Wallis test with post hoc pairwise comparisons (α = 0.05). RESULTS: The AA and AD groups, with the NC group as a reference, exhibited no significant tooth morphology discrepancies across entire external or occlusal surfaces. The AD group exhibited higher root mean square and positive average values on the axial surface (P < .05). The AD and NC groups exhibited a better internal fit than the AA group (P < .001). The cusp angles were similar across all groups (P = .065). The NC group yielded more occlusal contact points than the AD group (P = .006). Occlusal and proximal contact intensities varied among the groups (both P < .001). CONCLUSIONS: Crowns designed by using both DL-based software programs exhibited similar morphologies on the occlusal and axial surfaces; however, they differed in internal fit, occlusion, and proximal contacts. Their overall performance was clinically comparable to that of the technician-based method in terms of the internal fit and number of occlusal contact points. CLINICAL SIGNIFICANCE: DL-based dental software for crown design can streamline the digital workflow in restorative dentistry, ensuring clinically-acceptable outcomes on tooth morphology, internal fit, occlusion, and proximal contacts. It can minimize the necessity of additional design optimization by dental technician.
Asunto(s)
Aprendizaje Profundo , Porcelana Dental , Cerámica , Coronas , Diseño Asistido por Computadora , Diseño de Prótesis Dental/métodos , Adaptación Marginal Dental , Programas InformáticosRESUMEN
OBJECTIVES: This study aimed to investigate the antimicrobial properties of three dimensionally-printed dental polymers (3DPs) incorporated with microencapsulated phytochemicals (MPs) and to assess their surface characteristics and cytotoxicity. METHODS: MPs derived from phytoncide oil and their specific chemical components were introduced into suspensions of three microbial species: Streptococcus gordonii, Streptococcus oralis, and Candida albicans. Optical density was measured to determine the microbial growth in the presence of MPs for testing their antimicrobial activity. MPs at 5% (w/w) were mixed with dental polymers and dispersants to 3DP discs. These microbial species were then seeded onto the discs and incubated for 24 h. The antibacterial and antifungal activities of MP-containing 3DPs were evaluated by counting the colony-forming units (n = 3). The biofilm formation on the 3DP was assessed by crystal violet staining assay (n = 3). Microbial viability was determined using a live-dead staining and CLSM observation (n = 3). Surface roughness and water contact angle were assessed (n = 10). Cytotoxicity of MP-containing 3DPs for human gingival fibroblast was evaluated by MTT assay. RESULTS: MPs, particularly (-)-α-pinene, suppressed the growth of all tested microbial species. MP-containing 3DPs significantly reduced the colony count (P ≤ 0.001) and biofilm formation (P ≤ 0.009), of all tested microbial species. Both surface roughness (P < 0.001) and water contact angle (P < 0.001) increased. The cytotoxicity remained unchanged after incorporating MPs to the 3DPs (P = 0.310). CONCLUSIONS: MPs effectively controlled the microbial growth on 3DPs as evidenced by the colony count, biofilm formation, and cell viability. Although MPs modified the surface characteristics, they did not influence the cytotoxicity of 3DPs. CLINICAL SIGNIFICANCE: Integration of MPs into 3DPs could produce dental prostheses or appliances with antimicrobial properties. This approach not only provides a proactive solution to reduce the risk of oral biofilm-related infection but also ensures the safety and biocompatibility of the material, thereby improving dental care.
Asunto(s)
Antiinfecciosos , Biopelículas , Humanos , Propiedades de Superficie , Antiinfecciosos/farmacología , Candida albicans , Fitoquímicos/farmacología , AguaRESUMEN
OBJECTIVES: To evaluate the time efficiency, occlusal morphology, and internal fit of dental crowns designed using generative adversarial network (GAN)-based dental software compared to conventional dental software. METHODS: Thirty datasets of partial arch scans for prepared posterior teeth were analyzed. Each crown was designed on each abutment using GAN-based software (AI) and conventional dental software (non-AI). The AI and non-AI groups were compared in terms of time efficiency by measuring the elapsed work time. The difference in the occlusal morphology of the crowns before and after design optimization and the internal fit of the crown to the prepared abutment were also evaluated by superimposition for each software. Data were analyzed using independent t tests or Mann-Whitney test with statistical significance (α=.05). RESULTS: The working time was significantly less for the AI group than the non-AI group at T1, T5, and T6 (P≤.043). The working time with AI was significantly shorter at T1, T3, T5, and T6 for the intraoral scan (P≤.036). Only at T2 (P≤.001) did the cast scan show a significant difference between the two groups. The crowns in the AI group showed less deviation in occlusal morphology and significantly better internal fit to the abutment than those in the non-AI group (both P<.001). CONCLUSIONS: Crowns designed by AI software showed improved outcomes than that designed by non-AI software, in terms of time efficiency, difference in occlusal morphology, and internal fit. CLINICAL SIGNIFICANCE: The GAN-based software showed better time efficiency and less deviation in occlusal morphology during the design process than the conventional software, suggesting a higher probability of optimized outcomes of crown design.
Asunto(s)
Coronas , Diseño de Prótesis Dental , Adaptación Marginal Dental , Diseño Asistido por Computadora , Programas Informáticos , Porcelana DentalRESUMEN
Acute myocardial infarction is an acute-stage disease that requires prompt diagnosis and treatment. Primary percutaneous coronary intervention (pPCI) for ST-elevation myocardial infarction (STEMI) is a high-risk factor for post-contrast acute kidney injury (PC-AKI). This retrospective cohort study analyzed the data of 754 patients with STEMI who underwent pPCI and were integrated into the Fast Interrogation Rule for STEMI critical pathway program between 2015 and 2019. We aimed to determine the optimal cutoff baseline eGFR for identifying a high risk of PC-AKI after multivariable adjustment with statistically significant risk factors. We also compared the incidence rates of PC-AKI between the previous and current diagnostic criteria. The probability of PC-AKI increased when the baseline estimated glomerular filtration rate (eGFR) was ≤ 79mL/min/1.73 m2. The optimal cutoff baseline eGFR for high risk of PC-AKI was found to be an eGFR of ≤ 61 mL/min/1.73 m2 after multivariable adjustment. The current diagnostic criteria more accurately identified the patient group with impaired renal function. Our results have clinically significant implications for identifying patients at a high risk of developing PC-AKI, especially before and after the use of contrast agents in patients who require PCI for STEMI in the emergency department.
Asunto(s)
Lesión Renal Aguda , Intervención Coronaria Percutánea , Infarto del Miocardio con Elevación del ST , Humanos , Estudios Retrospectivos , Intervención Coronaria Percutánea/efectos adversos , Intervención Coronaria Percutánea/métodos , Tasa de Filtración Glomerular , Medios de Contraste/efectos adversos , Lesión Renal Aguda/diagnóstico , Lesión Renal Aguda/epidemiología , Lesión Renal Aguda/etiología , Factores de Riesgo , Servicio de Urgencia en HospitalRESUMEN
STATEMENT OF PROBLEM: Selecting the sterilization method is important because sterilization can alter the surface chemistry of implant materials, including zirconia, and influence their cellular biocompatibility. Studies on the biological effects of sterilization on implant materials are lacking. PURPOSE: The purpose of this in vitro study was to evaluate the biocompatibility of gamma-ray irradiated 3 mol% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) compared with unirradiated titanium, 3Y-TZP, and pure gold. MATERIAL AND METHODS: Disk-shaped specimens each of commercially pure grade 4 titanium, 3Y-TZP, gamma-rayed 3Y-TZP, and pure gold were prepared and evaluated for osteogenic potential by using a clonal murine cell line of immature osteoblasts derived from mice (MC3T3-E1 cells). The surface topography (n=3), chemical analysis of the disks (n=3), and cell morphology cultured on these surfaces were examined using scanning electron microscopy, confocal laser scanning microscopy, and energy dispersive spectroscopy. Cellular biocompatibility was analyzed for 1 and 3 days after seeding. Cell adhesion and spreading were evaluated using confocal laser scanning microscopy (n=3). Cell proliferation was evaluated using methyl thiazolyl tetrazolium assay (n=3). Kruskal-Wallis and Bonferroni corrections were used to evaluate the statistical significance of the intergroup differences (α=.05). RESULTS: Gamma-ray sterilization of 3Y-TZP showed significantly higher surface roughness compared with titanium and gold (P<.002). On day 1, the proliferation and adhesion of MC3T3-E1 cells cultured on gamma-rayed 3Y-TZP were significantly higher than those cultured on gold (P<.05); however, cell spreading was significantly lower than that of titanium on days 1 and 3 (P<.05). On day 3, cell proliferation of gamma-rayed 3Y-TZP was significantly lower than that of unirradiated 3Y-TZP (P<.05). Cell adhesion of gamma-rayed 3Y-TZP was slightly lower than that of zirconia and titanium but without significant difference (P>.05). CONCLUSIONS: Gamma-rayed zirconia exhibited increased surface roughness compared with titanium and significantly decreased bioactivity compared with titanium and zirconia. The use of gamma-ray sterilization on zirconia is not promising regarding biocompatibility, and the effect of this sterilization method on implant materials warrants further investigation.
Asunto(s)
Materiales Dentales , Titanio , Ratones , Animales , Ensayo de Materiales , Materiales Dentales/química , Circonio/química , Itrio/química , Propiedades de SuperficieRESUMEN
The triage process in emergency departments (EDs) relies on the subjective assessment of medical practitioners, making it unreliable in certain aspects. There is a need for a more accurate and objective algorithm to determine the urgency of patients. This paper explores the application of advanced data-synthesis algorithms, machine learning (ML) algorithms, and ensemble models to predict patient mortality. Patients predicted to be at risk of mortality are in a highly critical condition, signifying an urgent need for immediate medical intervention. This paper aims to determine the most effective method for predicting mortality by enhancing the F1 score while maintaining high area under the receiver operating characteristic curve (AUC) score. This study used a dataset of 7325 patients who visited the Yonsei Severance Hospital's ED, located in Seoul, South Korea. The patients were divided into two groups: patients who deceased in the ED and patients who didn't. Various data-synthesis techniques, such as SMOTE, ADASYN, CTGAN, TVAE, CopulaGAN, and Gaussian Copula, were deployed to generate synthetic patient data. Twenty two ML models were then utilized, including tree-based algorithms like Decision tree, AdaBoost, LightGBM, CatBoost, XGBoost, NGBoost, TabNet, which are deep neural network algorithms, and statistical algorithms such as Support Vector Machine, Logistic Regression, Random Forest, k-nearest neighbors, and Gaussian Naive Bayes, as well as Ensemble Models which use the results from the ML models. Based on 21 patient information features used in the pandemic influenza triage algorithm (PITA), the models explained previously were applied to aim for the prediction of patient mortality. In evaluating ML algorithms using an imbalanced medical dataset, conventional metrics like accuracy scores or AUC can be misleading. This paper emphasizes the importance of using the F1 score as the primary performance measure, focusing on recall and specificity in detecting patient mortality. The highest-ranked model for predicting mortality utilized the Gaussian Copula data-synthesis technique and the CatBoost classifier, achieving an AUC of 0.9731 and an F1 score of 0.7059. These findings highlight the effectiveness of machine learning algorithms and data-synthesis techniques in improving the prediction performance of mortality in EDs.
Asunto(s)
Cubomedusas , Aprendizaje Profundo , Humanos , Animales , Teorema de Bayes , Servicio de Urgencia en Hospital , Algoritmos , BenchmarkingRESUMEN
Bacterial two-component systems are crucial features of bacterial pathogens such as methicillin-resistant Staphylococcus aureus to overcome environmental and antimicrobial stresses by activating regulons to interfere with the bactericidal mechanisms. GraRS is a unique subset of two-component systems belonging to the intramembrane-sensing histidine kinase family (IM-HK) and is responsible for resistance to cationic host defense peptides. However, the precise manner by which the short 9-residue extracellular loop of the membrane sensor GraS detects the antimicrobial peptides and transduces the signal is not comprehensively understood. Here, we show that a single point mutation (D35A) in the extracellular loop of GraS blocked activation of GraRS, but this effect was also abrogated with graS mutations in the N-terminal transmembrane segments without any accompanying effect on GraS protein expression. Additionally, mutations in H120 and T172 in the dimerization/histidine phosphotransfer (DHp) domain of GraS increased activation without any accompanying enhancement in dimerization, likely due to disruption of the H120-T172 interaction that restricts rotational movements of the DHp helices since swapping H120 and T172 did not alter GraS activation. Notably, the enhancing effects of H120 and T172 mutations were abolished with a D35 mutation, highlighting the pivotal role of D35 in the 9-residue extracellular loop of GraS in GraR phosphorylation. In summary, our study delivers the significance of the D35 in the extracellular loop of GraS and ensuing changes in the N-terminal transmembrane helices as a model to illustrate signaling in the IM-HK subset of two-component regulatory systems. IMPORTANCE Methicillin-resistant Staphylococcus aureus (MRSA) is a human pathogen capable of infecting skin, blood, internal organs, and artificial medical devices. Generally, personal hygiene and a robust immune system can limit the spread of this pathogen; however, MRSA possesses an assortment of phenotypic tools to survive the hostile host environment including host defense peptides. More specifically, S. aureus utilizes two-component systems to sense noxious environmental cues to respond to harmful environmental elements. Our study focused on a two-component system called GraRS that S. aureus deploys against host defense peptides. We showed that one single residue in the extracellular loop of GraS and the adjacent membrane segment controlled the activation of GraRS, indicating the importance of a well-tuned-charged residue in the extracellular loop of GraS for sensing activity.
RESUMEN
BACKGROUND: This study used a single-institution cohort, the Severance dataset, validated the results by using the surveillance, epidemiology, and end results (SEER) database, adjusted with propensity-score matching (PSM), and analyzed by using a machine learning method. To determine whether the 5-year, disease-free survival (DFS) and overall survival (OS) of patients undergoing nipple-sparing mastectomy (NSM) with immediate breast reconstruction (IBR) are not inferior to those of women treated with total mastectomy/skin-sparing mastectomy (TM/SSM). METHODS: The Severance dataset enrolled 611 patients with early, invasive breast cancer from 2010 to 2017. The SEER dataset contained data for 485,245 patients undergoing TM and 14,770 patients undergoing NSM between 2000 and 2018. All patients underwent mastectomy and IBR. Intraoperative, frozen-section biopsy for the retro-areolar tissue was performed in the NSM group. The SEER dataset was extracted by using operation types, including TM/SSM and NSM. The primary outcome was DFS for the Severance dataset and OS for the SEER dataset. PSM analysis was applied. Survival outcomes were analyzed by using the Kaplan-Meier method and Cox proportional hazard (Cox PH) regression model. We implemented XGBSE to predict mortality with high accuracy and evaluated model prediction performance using a concordance index. The final model inspected the impact of relevant predictors on the model output using shapley additive explanation (SHAP) values. RESULTS: In the Severance dataset, 151 patients underwent NSM with IBR and 460 patients underwent TM/SSM with IBR. No significant differences were found between the groups. In multivariate analysis, NSM was not associated with reduced oncologic outcomes. The same results were observed in PSM analysis. In the SEER dataset, according to the SHAP values, the individual feature contribution suggested that AJCC stage ranks first. Analyses from the two datasets confirmed no impact on survival outcomes from the two surgical methods. CONCLUSIONS: NSM with IBR is a safe and feasible procedure in terms of oncologic outcomes. Analysis using machine learning methods can be successfully applied to identify significant risk factors for oncologic outcomes.
Asunto(s)
Neoplasias de la Mama , Mamoplastia , Mastectomía Subcutánea , Humanos , Femenino , Neoplasias de la Mama/patología , Mastectomía/métodos , Mastectomía Simple , Pezones/cirugía , Pezones/patología , Mamoplastia/métodos , Estudios RetrospectivosRESUMEN
Phthalates in contaminated foods and personal care products are one of the most frequently exposed chemicals with a public health concern. Phthalate exposure is related to cardiovascular diseases, including diabetic vascular complications and cerebrovascular diseases, yet the mechanism is still unclear. The blood-brain barrier (BBB) integrity disruption is strongly associated with cardiovascular and neurological disease exacerbation. We investigated BBB damage by di-(2-ethylhexyl) phthalate (DEHP) or its metabolite mono-(2-ethylhexyl) phthalate (MEHP) using brain endothelial cells and rat models. BBB damage by the subthreshold level of MEHP, but not a DEHP, significantly increased by the presence of methylglyoxal (MG), a reactive dicarbonyl compound whose levels increase in the blood in hyperglycemic conditions in diabetic patients. Significant potentiation in apoptosis and autophagy activation, mitochondria-derived reactive oxygen species (ROS) production, and mitochondrial metabolic disturbance were observed in brain ECs by co-exposure to MG and MEHP. N-acetyl cysteine (NAC) restored autophagy activation as well as tight junction protein impairment induced by co-exposure to MG and MEHP. Intraperitoneal administration of MG and MEHP significantly altered mitochondrial membrane potential and tight junction integrity in rat brain endothelium. This study may provide novel insights into enhancing phthalate toxicity in susceptible populations, such as diabetic patients.
Asunto(s)
Dietilhexil Ftalato , Ratas , Animales , Dietilhexil Ftalato/toxicidad , Piruvaldehído , Barrera Hematoencefálica/metabolismo , Células Endoteliales/metabolismo , Estrés Oxidativo , Metabolismo Energético , Mitocondrias/metabolismoRESUMEN
PURPOSE: This in vitro study aimed to evaluate the effects of restorative materials and scanning aid conditions on the accuracy and time efficiency of intraoral scans. MATERIALS AND METHODS: Identical anatomic contour crowns were fabricated using the following materials: hybrid ceramic, 3 mol% yttria-stabilized tetragonal zirconia, 4 mol% yttria-partially stabilized zirconia, 5 mol% yttria-partially stabilized zirconia, cobalt-chromium (Co-Cr), resin, lithium disilicate, and feldspathic ceramic. The models were digitized and analyzed for accuracy (n = 10) under three scanning aid conditions (powder-based, liquid-based, and none). Additionally, the effect of metal restorations on the scan accuracy of other crowns was investigated. The scan time for complete arches was also recorded. One-way analysis of variance, Welch analysis of variance, and post-hoc comparison or independent t-tests were used for trueness analysis, and the F-test was used to examine precision (α = 0.05). RESULTS: Significant differences were observed in the trueness of the different restorative materials under the no-scanning aid condition (P < 0.05). In contrast, no statistically significant difference among the groups was observed with the powder- or liquid-based scanning aid. For each restorative material, the no-scanning aid condition showed significantly lower trueness than that with powder- or liquid-based scanning aids. The presence of a Co-Cr crown did not affect the trueness of other restorations in the arch. The scan time efficiency significantly increased on applying a powder- or liquid-based scanning aid. CONCLUSIONS: Using a scanning aid was effective to improve the scan accuracy of the tested restorative materials and scan time efficiency. Applying scanning aids to existing intraoral restorations can help improve prosthesis quality and reduce the need for clinical adjustment at the occlusal or proximal contacts.
Asunto(s)
Cerámica , Materiales Dentales , Polvos , Coronas , Diseño Asistido por ComputadoraRESUMEN
STATEMENT OF PROBLEM: Support structures are essential for the quality of resin-based prostheses made by the digital light processing (DLP), but few studies have evaluated the effect of support structure on the accuracy of zirconia-based anatomic contour prostheses. PURPOSE: The purpose of this in vitro study was to evaluate the effect of maximum support attachment angle (MSA) on the intaglio surface trueness of anatomic contour prostheses made by DLP and compare the trueness of 2-unit anatomic contour prostheses with that of those produced by milling. MATERIAL AND METHODS: Anatomic contour single-unit prostheses were manufactured using DLP and a suspension with 3-mol% yttria-stabilized zirconia. Four different conditions of MSA values to the vertical axis of the object (50, 55, 60, and 65 degrees) were applied (n=10). After printing, postprocessing, and sintering, all successfully produced prostheses were evaluated for intaglio surface trueness by considering the root mean square (RMS). Using the MSA showing the highest trueness, the 2-unit prostheses made by DLP (DLP group) were compared with milled (MIL group) prostheses in terms of intaglio accuracy (n=10). One-way analysis of variance and a post hoc pairwise comparison or independent t test were used for trueness analysis (α=.05). RESULTS: Three MSA groups (50, 55, and 60 degrees) were successfully produced with significant differences between the trueness of the single-unit prostheses for the groups with different MSA values (P<.05). The highest trueness was in the 50-degree MSA group. The 2-unit prostheses of the DLP group with 50-degree MSA showed significantly lower trueness than those of the MIL group (P<.05); however, the RMS values of both groups were lower than 50 µm. CONCLUSIONS: The intaglio surface trueness of anatomic contour DLP-generated prostheses can be improved by changing the MSA. The 50-degree MSA was beneficial for the accuracy of both single-unit and 2-unit DLP-generated prostheses, produced within clinically acceptable limits.
Asunto(s)
Diseño Asistido por Computadora , Implantes Dentales , Circonio , Dentadura CompletaRESUMEN
Patients with cystic fibrosis (CF) often suffer recurrent bronchial bacterial infections that lead to deterioration of lung function over time. The infections in CF patients are often due to S. aureus and P. aeruginosa that colonize the airways. Significantly, methicillin-resistant S. aureus (MRSA) makes it challenging for treatment in CF patients due to its feature of multiple antibiotic resistance. In bronchial airways, cationic antimicrobial peptides are often present in mucosa cells, neutrophils, and macrophages that interfere with bacterial proliferation. The major mechanism for resistance to the bactericidal activity of cationic peptides in S. aureus is mediated by the GraRS two-component system that activates expression of MprF and DltABCD to increase surface positive charge to repel interactions with cationic peptides. We recently found that VraG, a membrane permease component of the VraFG efflux pumps, harbors a long 200-residue extracellular loop (EL) that utilizes K380 to interact with the negatively charged 9-residue extracellular loop of the membrane sensor GraS to control mprF expression in a community-acquired MRSA strain JE2. In this study, we extended this observation to a CF MRSA strain CF32A1 where we affirmed that the EL loop of VraG controls GraS-mediated signal transduction; however, in contrast to community acquired MRSA strain JE2, the CF MRSA strain CF32A1 requires both K380 and K388 in the EL of VraG to properly modulate signal transduction mediated by GraS. This effect was not attributable to the several single nucleotide polymorphisms that exist between VraG and GraS in the two MRSA strains.
Asunto(s)
Fibrosis Quística , Staphylococcus aureus Resistente a Meticilina , Infecciones Estafilocócicas , Antibacterianos/metabolismo , Antibacterianos/farmacología , Péptidos Catiónicos Antimicrobianos/metabolismo , Proteínas Bacterianas/genética , Proteínas Bacterianas/metabolismo , Fibrosis Quística/microbiología , Humanos , Staphylococcus aureus Resistente a Meticilina/genética , Staphylococcus aureus Resistente a Meticilina/metabolismo , Pruebas de Sensibilidad Microbiana , Infecciones Estafilocócicas/microbiología , Staphylococcus aureus/metabolismoRESUMEN
Teg49 is a Staphylococcus aureus trans-acting regulatory sRNA derived from cleavage of the sarA P3 transcript. We showed by RNA-Seq here that the 5' trident-like structure in Teg49 regulates transcriptionally (direct and indirect) 22 genes distinct from sarA. Among these, Teg49 was noted to repress spn, encoding a 102 residue preprotein which yields the mature 73 residue peptide which inhibits the catalytic activity of myeloperoxidase in human neutrophils. Teg49 was found to regulate spn mRNA post-transcriptionally in strain SH1000 through 9-nt base-pairing between hairpin loop 2 of Teg49 and an exposed bulge of the spn mRNA. Mutations of the Teg49 binding site disrupted the repression of spn, leading to reduced degradation, and increased half-life of spn mRNA in the Teg49 mutant. The spn-Teg49 interaction was also confirmed with a synonymous spn mutation to yield enhanced spn expression in the mutant vs. the parent. The Teg49 mutant with increased spn expression exhibited enhanced resistance to MPO activity in vitro. Killing assays with human neutrophils showed that the Teg49 mutant was more resistant to killing after phagocytosis. Altogether, this study shows that Teg49 in S. aureus has a distinct and important regulatory profile whereby this sRNA modulates resistance to myeloperoxidase-mediated killing by human neutrophils.
Asunto(s)
ARN Pequeño no Traducido , Infecciones Estafilocócicas , Proteínas Bacterianas/genética , Proteínas Bacterianas/metabolismo , Regulación Bacteriana de la Expresión Génica/genética , Humanos , Neutrófilos , Peroxidasa/genética , Peroxidasa/metabolismo , ARN Mensajero/metabolismo , ARN Pequeño no Traducido/genética , ARN Pequeño no Traducido/metabolismo , Staphylococcus aureus/genética , Staphylococcus aureus/metabolismoRESUMEN
In optical communications, sphere shaping is used to limit the energy of lightwaves to within a certain value over a period. This minimizes the energy required to contain information, allowing the rate of information transmission to approach the theoretical limit if the transmission medium is linear. However, when shaped lightwaves are transmitted through optical fiber, Kerr nonlinearity manifests itself as nonlinear interference in a peculiar way, potentially lowering communications capacity. In this article, we show that the impact of sphere shaping on Kerr nonlinearity varies with chromatic dispersion, shaping block length and symbol rate, and that this impact can be predicted using a novel statistical measure of light energy. As a practical consequence, by optimally controlling the parameters of sphere-shaped lightwaves, it is experimentally demonstrated that the information rate can be increased by up to 25% in low-dispersion channels on a 2824 km dispersion-managed wavelength-division multiplexed optical fiber link.
RESUMEN
BACKGROUND: The conventional methods for teaching neurological examination with real patients to medical students have some limitations if the patient with the symptom or disease is not available. Therefore, we developed a Virtual Reality-based Neurological Examination Teaching Tool (VRNET) and evaluated its usefulness in in teaching neurological examinations for the medical students. METHODS: In this prospective, randomized, single-blind study, we recruited 98 medical students and divided them into two groups: 1) A standardized patient(SP) group that received the clinical performance examination utilizing standard patients complaining of dizziness was provided neurological findings using conventional method such as verbal description, photographs, and video clips; 2) A SP with VRNET group that was provided the neurological findings using the newly developed tool. Among the 98 students, 3 did not agree to participate, and 95 were enrolled in this study. The SP group comprised 39 students and the SP with VRNET group had 56 students. RESULTS: There were no statistical differences in VRNET's realness and student satisfaction between the SP and SP with VRNET groups. However, a statistically significant difference was found in the Neurologic Physical Exam (NPE) score (p = 0.043); the SP with VRNET group had higher NPE scores (3.81 ± 0.92) than the SP group (3.40 ± 1.01). CONCLUSIONS: VRNET is useful in teaching senior (graduating) medical students with SP with a neurologic problem.
Asunto(s)
Educación de Pregrado en Medicina , Estudiantes de Medicina , Realidad Virtual , Competencia Clínica , Humanos , Examen Neurológico , Examen Físico , Estudios Prospectivos , Método Simple Ciego , EnseñanzaRESUMEN
GraS is a membrane sensor in Staphylococcus aureus that induces mprF and dltABCD expression to alter the surface positive charge upon exposure to cationic human defense peptides (HDPs). The sensing domain of GraS likely resides in the 9-residue extracellular loop (EL). In this study, we assessed a hospital-acquired methicillin-resistant S. aureus (HA-MRSA) strain (COL) for the specific role of two distinct EL mutations: F38G (bulk) and D/35/37/41K (charged inversion). Activation of mprF by polymyxin B (PMB) was reduced in the D35/37/41K mutant versus the D35/37/41G mutant, correlating with reduced surface positive charge; in contrast, these effects were less prominent in the F38G mutant but still lower than those in the parent. These data indicated that both electrostatic charge and steric bulk of the EL of GraS influence induction of genes impacting HDP resistance. Using mprF expression as a readout, we confirmed GraS signaling was pH dependent, increasing as pH was lowered (from pH 7.5 down to pH 5.5). In contrast to PMB activation, reduction of mprF was comparable at pH 5.5 between the P38G and D35/37/41K point mutants, indicating a mechanistic divergence between GraS activation by acidic pH versus cationic peptides. Survival assays in human blood and purified polymorphonuclear leukocytes (PMNs) revealed lower survival of the D35/37/41K mutant versus the F38G mutant, with both being lower than that of the parent. Virulence studies in the rabbit endocarditis model mirrored whole blood and PMN killing assay data described above. Collectively, these data confirmed the importance of specific residues within the EL of GraS in conferring essential bacterial responses for MRSA survival in infections.
Asunto(s)
Proteínas Bacterianas/genética , Infecciones Cardiovasculares/metabolismo , Infecciones Cardiovasculares/microbiología , Farmacorresistencia Bacteriana/genética , Staphylococcus aureus Resistente a Meticilina/genética , Neutrófilos/metabolismo , Infecciones Estafilocócicas/metabolismo , Animales , Péptidos Catiónicos Antimicrobianos/metabolismo , Endocarditis/metabolismo , Endocarditis/microbiología , Femenino , Regulación Bacteriana de la Expresión Génica/genética , Humanos , Pruebas de Sensibilidad Microbiana/métodos , Viabilidad Microbiana/genética , Neutrófilos/microbiología , Conejos , Infecciones Estafilocócicas/microbiologíaRESUMEN
Antimicrobial peptides (AMPs) are one of the key immune responses that can eliminate pathogenic bacteria through membrane perturbation. As a successful skin commensal, Staphylococcus epidermidis can sense and respond to AMPs through the GraXRS two-component system and an efflux system comprising the VraG permease and VraF ATPase. GraS is a membrane sensor known to function in AMP resistance through a negatively charged, 9-residue extracellular loop, which is predicted to be linear without any secondary structure. An important question is how GraS can impart effective sensing of AMPs through such a small unstructured sequence. In this study, we verified the role of graS and vraG in AMP sensing in S. epidermidis, as demonstrated by the failure of the ΔgraS or ΔvraG mutants to sense. Deletion of the extracellular loop of VraG did not affect sensing but reduced survival with polymyxin B. Importantly, a specific region within the extracellular loop, termed the guard loop (GL), has inhibitory activity since sensing of polymyxin B was enhanced in the ΔGL mutant, indicating that the GL may act as a gatekeeper for sensing. Bacterial two-hybrid analysis demonstrated that the extracellular regions of GraS and VraG interact, but interaction appears dispensable to sensing activity. Mutation of the extracellular loop of VraG, the GL, and the active site of VraF suggested that an active detoxification function of VraG is necessary for AMP resistance. Altogether, we provide evidence for a unique sensory scheme that relies on the function of a permease to impart effective information processing. IMPORTANCE Staphylococcus epidermidis has become an important opportunistic pathogen that is responsible for nosocomial and device-related infections that account for considerable morbidity worldwide. A thorough understanding of the mechanisms that enable S. epidermidis to colonize human skin successfully is essential for the development of alternative treatment strategies and prophylaxis. Here, we demonstrate the importance of an AMP response system in a clinically relevant S. epidermidis strain. Furthermore, we provide evidence for a unique sensory scheme that would rely on the detoxification function of a permease to effect information processing.
Asunto(s)
Adenosina Trifosfatasas/metabolismo , Proteínas Bacterianas/metabolismo , Proteínas de Transporte de Membrana/química , Proteínas de Transporte de Membrana/metabolismo , Infecciones Estafilocócicas/microbiología , Staphylococcus epidermidis/enzimología , Adenosina Trifosfatasas/química , Adenosina Trifosfatasas/genética , Péptidos Catiónicos Antimicrobianos/metabolismo , Proteínas Bacterianas/química , Proteínas Bacterianas/genética , Humanos , Proteínas de Transporte de Membrana/genética , Conformación Proteica en Hélice alfa , Infecciones Estafilocócicas/metabolismo , Staphylococcus epidermidis/química , Staphylococcus epidermidis/efectos de los fármacos , Staphylococcus epidermidis/genéticaRESUMEN
BACKGROUND: The Life Extension Medical Decision law enacted on February 4, 2018 in South Korea was the first to consider the suspension of futile life-sustaining treatment, and its enactment caused a big controversy in Korean society. However, no study has evaluated whether the actual implementation of life-sustaining treatment has decreased after the enforcement of this law. This study aimed to compare the provision of patient consent before and after the enforcement of this law among cancer patients who visited a tertiary university hospital's emergency room to understand the effects of this law on the clinical care of cancer patients. METHODS: This retrospective single cohort study included advanced cancer patients aged over 19 years who visited the emergency room of a tertiary university hospital. The two study periods were as follows: from February 2017 to January 2018 (before) and from May 2018 to April 2019 (after). The primary outcome was the length of hospital stay. The consent rates to perform cardiopulmonary resuscitation (CPR), intubation, continuous renal replacement therapy (CRRT), and intensive care unit (ICU) admission were the secondary outcomes. RESULTS: The length of hospital stay decreased after the law was enforced from 4 to 2 days (p = 0.001). The rates of direct transfers to secondary hospitals and nursing hospitals increased from 8.2 to 21.2% (p = 0.001) and from 1.0 to 9.7%, respectively (p < 0.001). The consent rate for admission to the ICU decreased from 6.7 to 2.3% (p = 0.032). For CPR and CRRT, the consent rates decreased from 1.0 to 0.0% and from 13.9 to 8.8%, respectively, but the differences were not significant (p = 0.226 and p = 0.109, respectively). CONCLUSION: After the enforcement of the Life Extension Medical Decision law, the length of stay in the tertiary university hospital decreased in patients who established their life-sustaining treatment plans in the emergency room. Moreover, the rate of consent for ICU admission decreased.