RESUMEN
A triboelectric nanogenerator (TENG) is of tremendous interest owing to its high energy efficiency with a simple device architecture and applicability to various materials. Most previous topological surface modifications introduced for further improving the performance of a TENG are detrimental because they require expensive and/or harsh (e.g., high temperature and acidity) postetching processes, which limit the material choice and design of its components. Herein, we demonstrate an one-step route for developing rapid wet-processable surface-conformal triboelectric nanoporous films (STENFs). Our method is based on a simple supramolecular assembly of a ternary polymer blend suitable for various conventional solution processes such as spin-, bar-, spray-, and dip-coating. The one-step wet process of a ternary solution produces thin large-area films in which self-assembled, ordered nanopores of approximately 33 nm in diameter are developed even without an additional etching process. The study reveals that the small amount of amine-terminated poly(ethylene oxide) added to the binary blend of sulfonic-acid-terminated poly(styrene) and poly(2-vinylpyridine) efficiently activates the formation of spontaneous nanopores as a pore-generating agent. Our STENF significantly enhances the open-circuit voltage up to 1.5 times higher than that of a planar one, leading to an improved power density of approximately 77 µW/cm2. The suitability for diverse conventional coating processes offers a convenient approach for fabricating high-performance STENFs not only on flat substrates such as metals, polymers, and oxides but also on topological ones including wrinkled, roughened surfaces, textile fibers, natural leaves, and fabrics over a large area.
RESUMEN
Versatile control of cylindrical nanostructures formed by supramolecular assembly of end-functionalized polymer blends is demonstrated not only in their orientation over large areas but also in their surface chemical functionalities. Two binary blends consisting of supramolecular analogues of diblock copolymers with complementary end-sulfonated and aminated groups are investigated, viz., mono-end-functionalized polymers of (i) one-end-sulfonated polystyrene (SPS) and one-end-aminated poly(butadiene) (APBD) and (ii) one end-aminated polystyrene (APS) and one end-sulfonated poly(butadiene) (SPBD). The orientation of the cylinders with respect to the substrate surface depends on the solvent annealing time; either hexagonally ordered vertical cylinders or in-plane ones are readily obtained by controlling the solvent annealing time. Selective chemical etching of one of the polymers provides four different chemically modified nanostructures, viz., hexagonally ordered cylindrical holes and cylindrical posts with either sulfonate or amine surface functional groups. Additional supramolecular assembly is successfully achieved by solution coating either polymers or organic dyes that complementarily interact with the functional groups on the nanostructures. Furthermore, the supramolecularly assembled nanostructures are controlled by confining them to topographically pre-patterned Si substrates with pattern geometries of various shapes and sizes to produce globally ordered vertical or in-plane cylinders with chemical functionalities on their surfaces.
RESUMEN
Structural colors (SCs) of photonic crystals (PCs) arise from selective constructive interference of incident light. Here, an ink-jet printable and rewritable block copolymer (BCP) SC display is demonstrated, which can be quickly written and erased over 50 times with resolution nearly equivalent to that obtained with a commercial office ink-jet printer. Moreover, the writing process employs an easily modified printer for position- and concentration-controlled deposition of a single, colorless, water-based ink containing a reversible crosslinking agent, ammonium persulfate. Deposition of the ink onto a self-assembled BCP PC film comprising a 1D stack of alternating layers enables differential swelling of the written BCP film and produces a full-colored SC display of characters and images. Furthermore, the information can be readily erased and the system can be reset by application of hydrogen bromide. Subsequently, new information can be rewritten, resulting in a chemically rewritable BCP SC display.
RESUMEN
Nonvolatile field-effect transistor (FET) memories containing transition metal dichalcogenide (TMD) nanosheets have been recently developed with great interest by utilizing some of the intriguing photoelectronic properties of TMDs. The TMD nanosheets are, however, employed as semiconducting channels in most of the memories, and only a few works address their function as floating gates. Here, a floating-gate organic-FET memory with an all-in-one floating-gate/tunneling layer of the solution-processed TMD nanosheets is demonstrated. Molybdenum disulfide (MoS2 ) is efficiently liquid-exfoliated by amine-terminated polystyrene with a controlled amount of MoS2 nanosheets in an all-in-one floating-gate/tunneling layer, allowing for systematic investigation of concentration-dependent charge-trapping and detrapping properties of MoS2 nanosheets. At an optimized condition, the nonvolatile memory exhibits memory performances with an ON/OFF ratio greater than 104 , a program/erase endurance cycle over 400 times, and data retention longer than 7 × 103 s. All-in-one floating-gate/tunneling layers containing molybdenum diselenide and tungsten disulfide are also developed. Furthermore, a mechanically-flexible TMD memory on a plastic substrate shows a performance comparable with that on a hard substrate, and the memory properties are rarely altered after outer-bending events over 500 times at the bending radius of 4.0 mm.
RESUMEN
The development of pressure sensors that are effective over a broad range of pressures is crucial for the future development of electronic skin applicable to the detection of a wide pressure range from acoustic wave to dynamic human motion. Here, we present flexible capacitive pressure sensors that incorporate micropatterned pyramidal ionic gels to enable ultrasensitive pressure detection. Our devices show superior pressure-sensing performance, with a broad sensing range from a few pascals up to 50 kPa, with fast response times of <20 ms and a low operating voltage of 0.25 V. Since high-dielectric-constant ionic gels were employed as constituent sensing materials, an unprecedented sensitivity of 41 kPa-1 in the low-pressure regime of <400 Pa could be realized in the context of a metal-insulator-metal platform. This broad-range capacitive pressure sensor allows for the efficient detection of pressure from a variety of sources, including sound waves, a lightweight object, jugular venous pulses, radial artery pulses, and human finger touch. This platform offers a simple, robust approach to low-cost, scalable device design, enabling practical applications of electronic skin.
RESUMEN
Organic field effect transistor based nonvolatile memory (OFET-NVM) with semiconducting nanofloating gates offers additional benefits over OFET-NVMs with conventional metallic floating gates due to the facile controllability of charge storage based on the energetic structure of the floating gate. In particular, an all-in-one tunneling and floating-gate layer in which the semiconducting polymer nanodomains are self-assembled in the dielectric tunneling layer is promising. In this study, we utilize crystals of a p-type semiconducting polymer in which the crystalline lamellae of the polymer are spontaneously developed and embedded in the tunneling matrix as the nanofloating gate. The widths and lengths of the polymer nanodomains are approximately 20 nm and a few hundred nanometers, respectively. An OFET-NVM containing the crystalline nanofloating gates exhibits memory performance with a large memory window of 10 V, programming/erasing switching endurance for over 500 cycles, and a long retention time of 5000 s. Moreover, the device performance is improved by comixing with an n-type semiconductor; thus, the solution-processed p- and n-type double floating gates capable of storing both holes and electrons allow for the multilevel operation of our OFET-NVM. Four highly reliable levels (two bits per cell) of charge trapping and detrapping are achieved using this OFET-NVM by accurately choosing the programming/erasing voltages.
RESUMEN
While tremendous efforts have been made for developing thin perovskite films suitable for a variety of potential photoelectric applications such as solar cells, field-effect transistors, and photodetectors, only a few works focus on the micropatterning of a perovskite film which is one of the most critical issues for large area and uniform microarrays of perovskite-based devices. Here we demonstrate a simple but robust method of micropatterning a thin perovskite film with controlled crystalline structure which guarantees to preserve its intrinsic photoelectric properties. A variety of micropatterns of a perovskite film are fabricated by either microimprinting or transfer-printing a thin spin-coated precursor film in soft-gel state with a topographically prepatterned elastomeric poly(dimethylsiloxane) (PDMS) mold, followed by thermal treatment for complete conversion of the precursor film to a perovskite one. The key materials development of our solvent-assisted gel printing is to prepare a thin precursor film with a high-boiling temperature solvent, dimethyl sulfoxide. The residual solvent in the precursor gel film makes the film moldable upon microprinting with a patterned PDMS mold, leading to various perovskite micropatterns in resolution of a few micrometers over a large area. Our nondestructive micropatterning process does not harm the intrinsic photoelectric properties of a perovskite film, which allows for realizing arrays of parallel-type photodetectors containing micropatterns of a perovskite film with reliable photoconduction performance. The facile transfer of a micropatterned soft-gel precursor film on other substrates including mechanically flexible plastics can further broaden its applications to flexible photoelectric systems.
RESUMEN
Enhancing the device performance of organic memory devices while providing high optical transparency and mechanical flexibility requires an optimized combination of functional materials and smart device architecture design. However, it remains a great challenge to realize fully functional transparent and mechanically durable nonvolatile memory because of the limitations of conventional rigid, opaque metal electrodes. Here, we demonstrate ferroelectric nonvolatile memory devices that use graphene electrodes as the epitaxial growth substrate for crystalline poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) polymer. The strong crystallographic interaction between PVDF-TrFE and graphene results in the orientation of the crystals with distinct symmetry, which is favorable for polarization switching upon the electric field. The epitaxial growth of PVDF-TrFE on a graphene layer thus provides excellent ferroelectric performance with high remnant polarization in metal/ferroelectric polymer/metal devices. Furthermore, a fully transparent and flexible array of ferroelectric field effect transistors was successfully realized by adopting transparent poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] semiconducting polymer.
Asunto(s)
Electricidad , Grafito/química , Polivinilos/química , Semiconductores , ElectrodosRESUMEN
Herein, nanometer-scale morphologies of graft-copolymer-like supramolecular thin films, composed of sulfonic acid terminated polystyrene (SPS) and poly(2-vinylpyridine) (P2VP), and their application to antireflection coatings were investigated. The intermolecular complexes of SPS and P2VP, formed through nonstoichiometric multiple hydrogen bonding between the sulfonic acid group of SPS and the nitrogen atom in pyridine unit of P2VP, occurring in film deposition allowed for the formation of spherical micelles (with SPS and P2VP as the corona and core, respectively) in the thin film. Interestingly, the domain size of the micelles was tunable from approximately 20 to 90â nm on average by controlling either the blend ratio of components or the concentration of polymer solution. Furthermore, nanoporous thin films could be easily prepared by removing the core of micelle-based nanostructures by using a simple solvent etching process, leaving sulfonic acid groups on the surface of nanopores, which can be utilized as potential functional sites. Those resultant nanoporous thin films were conveniently employed as an antireflection layer on a glass substrate, giving a maximum 97.8 % transmittance in the visible wavelength range.
RESUMEN
The photocurrent conversions of transition metal dichalcogenide nanosheets are unprecedentedly impressive, making them great candidates for visible range photodetectors. Here we demonstrate a method for fabricating micron-thick, flexible films consisting of a variety of highly separated transition metal dichalcogenide nanosheets for excellent band-selective photodetection. Our method is based on the non-destructive modification of transition metal dichalcogenide sheets with amine-terminated polymers. The universal interaction between amine and transition metal resulted in scalable, stable and high concentration dispersions of a single to a few layers of numerous transition metal dichalcogenides. Our MoSe2 and MoS2 composites are highly photoconductive even at bending radii as low as 200 µm on illumination of near infrared and visible light, respectively. More interestingly, simple solution mixing of MoSe2 and MoS2 gives rise to blended composite films in which the photodetection properties were controllable. The MoS2/MoSe2 (5:5) film showed broad range photodetection suitable for both visible and near infrared spectra.
RESUMEN
Design of materials to be heat-conductive in a preferred direction is a crucial issue for efficient heat dissipation in systems using stacked devices. Here, we demonstrate a facile route to fabricate polymer composites with directional thermal conduction. Our method is based on control of the orientation of fillers with anisotropic heat conduction. Melt-compression of solution-cast poly(vinylidene fluoride) (PVDF) and graphene nanoflake (GNF) films in an L-shape kinked tube yielded a lightweight polymer composite with the surface normal of GNF preferentially aligned perpendicular to the melt-flow direction, giving rise to a directional thermal conductivity of approximately 10 W/mK at 25 vol % with an anisotropic thermal conduction ratio greater than six. The high directional thermal conduction was attributed to the two-dimensional planar shape of GNFs readily adaptable to the molten polymer flow, compared with highly entangled carbon nanotubes and three-dimensional graphite fillers. Furthermore, our composite with its density of approximately 1.5 g/cm(3) was mechanically stable, and its thermal performance was successfully preserved above 100 °C even after multiple heating and cooling cycles. The results indicate that the methodology using an L-shape kinked tube is a new way to achieve polymer composites with highly anisotropic thermal conduction.
RESUMEN
The core components of a floating-gate organic thin-film transistor nonvolatile memory (OTFT-NVM) include the semiconducting channel layer, tunneling layer, floating-gate layer, and blocking layer, besides three terminal electrodes. In this study, we demonstrated OTFT-NVMs with all four constituent layers made of polymers based on consecutive spin-coating. Ambipolar charges injected and trapped in a polymer electret charge-controlling layer upon gate program and erase field successfully allowed for reliable bistable channel current levels at zero gate voltage. We have observed that the memory performance, in particular the reliability of a device, significantly depends upon the thickness of both blocking and tunneling layers, and with an optimized layer thickness and materials selection, our device exhibits a memory window of 15.4 V, on/off current ratio of 2 × 10(4), read and write endurance cycles over 100, and time-dependent data retention of 10(8) s, even when fabricated on a mechanically flexible plastic substrate.
RESUMEN
As one of the most emerging next-generation nonvolatile memories, one-transistor (1T)-type nonvolatile memories are of great attention due to their excellent memory performance and simple device architecture suitable for high density memory arrays. In particular, organic 1T-type memories containing both organic semiconductors and insulators are further beneficial because of their mechanical flexibility with low cost fabrication. Here, we demonstrate a new flexible organic 1T-type memory operating at low voltage. The low voltage operation of a memory less than 10 V was obtained by employing a polymer gate insulator solution blended with ionic liquid as a charge storage layer. Ionic liquid homogeneously dissolved in a thin poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) film gave rise to low voltage operation of a device due to its high capacitance. Simultaneously, stable charge trapping of either anions or cations efficiently occurred in the polymer matrix, dependent upon gate bias. Optimization of ionic liquid in PVDF-TrFE thus led to an air-stable and mechanically flexible organic 1T-type nonvolatile memory operating at programming voltage of ±7 V with large ON/OFF current margin of approximately 10(3), reliable time-dependent data retention of more than 10(4) seconds, and write/read endurance cycles of 80.
RESUMEN
High-performance non-volatile memory that can operate under various mechanical deformations such as bending and folding is in great demand for the future smart wearable and foldable electronics. Here we demonstrate non-volatile solution-processed ferroelectric organic field-effect transistor memories operating in p- and n-type dual mode, with excellent mechanical flexibility. Our devices contain a ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) thin insulator layer and use a quinoidal oligothiophene derivative (QQT(CN)4) as organic semiconductor. Our dual-mode field-effect devices are highly reliable with data retention and endurance of >6,000 s and 100 cycles, respectively, even after 1,000 bending cycles at both extreme bending radii as low as 500 µm and with sharp folding involving inelastic deformation of the device. Nano-indentation and nano scratch studies are performed to characterize the mechanical properties of organic layers and understand the crucial role played by QQT(CN)4 on the mechanical flexibility of our devices.
RESUMEN
One-dimensional nanowires (NWs) have been extensively examined for numerous potential nano-electronic device applications such as transistors, sensors, memories, and photodetectors. The ferroelectric-gate field effect transistors (Fe-FETs) with semiconducting NWs in particular in combination with ferroelectric polymers as gate insulating layers have attracted great attention because of their potential in high density memory integration. However, most of the devices still suffer from low yield of devices mainly due to the ill-control of the location of NWs on a substrate. NWs randomly deposited on a substrate from solution-dispersed droplet made it extremely difficult to fabricate arrays of NW Fe-FETs. Moreover, rigid inorganic NWs were rarely applicable for flexible non-volatile memories. Here, we present the NW Fe-FETs with position-addressable polymer semiconducting NWs. Polymer NWs precisely controlled in both location and number between source and drain electrode were achieved by direct electrohydrodynamic NW printing. The polymer NW Fe-FETs with a ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) exhibited non-volatile ON/OFF current margin at zero gate voltage of approximately 10(2) with time-dependent data retention and read/write endurance of more than 10(4) seconds and 10(2) cycles, respectively. Furthermore, our device showed characteristic bistable current hysteresis curves when being deformed with various bending radii and multiple bending cycles over 1000 times.
RESUMEN
Supramolecular assembly of end-functionalized polymers, forming block copolymer-like supramolecules based on ionic interaction, has been utilized as a simple and facile method for generating functionalized nanoporous thin film. Here, the binary blend film of aminated poly(ethylene oxide) dendrimer (APEO-G) and sulfonated polystyrene (SPS) at a stoichiometric composition after benzene/water solvent vapor annealing exhibits spherical domains in multilayers over a large area. By controlling the number of end-functional arms of dendrimer via divergent ring-opening polymerization of ethylene oxide as well as the molecular weights of SPS, the domain sizes can be controlled ranging from mainly 34 to 54 nm, even to 131 nm. Our supramolecular-assembly system provides an alternative approach to fabricating a functional nanotemplate by easily etching domains with selective solvent treatment and leaving functional groups at the pore surfaces.
RESUMEN
A gas-driven ultrafast adhesion switching of water droplets on palladium-coated Si nanowire arrays is demonstrated. By regulating the gas-ambient between the atmosphere and H2 , the super-hydrophobic adhesion is repeatedly switched between water-repellent and water-adhesive. The capability of modulating the super-hydrophobic adhesion on a super-hydrophobic surface with a non-contact mode could be applicable to novel functional lab-on-a-chip platforms.
Asunto(s)
Cristalización/métodos , Hidrógeno/química , Microfluídica/métodos , Nanoestructuras/química , Paladio/química , Silicio/química , Agua/química , Adhesividad , Adsorción , Diseño de Equipo , Análisis de Falla de Equipo , Gases/química , Interacciones Hidrofóbicas e Hidrofílicas , Ensayo de Materiales , Nanoestructuras/ultraestructura , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Printable non-volatile polymer memories are fabricated with solution-processed nanocomposite films of poly(styrene-block-paraphenylene) (PS-b-PPP) and single-wall carbon nanotubes (SWNTs). The devices show stable data retention at high temperatures of up to 100 °C without significant performance degradation due to the strong, non-destructive, and isomorphic π-π interactions between the SWNTs and PPP block.
RESUMEN
Supramolecular assembly through complementary interaction between molecular subgroups belonging to phase-separating polymer species offers a great opportunity, not only for constructing nanoscale soft templates reminiscent of conventional block copolymer morphologies, but also for tailoring surface properties by facile removal of one of the structure components by cleaving complementary interactions. Herein we report the fabrication of a novel, organic, nanoporous film through supramolecular assembly of two complementarily, end-interacting, mono-end-functionalized polymers under solvent annealing. The film of end-functionalized polymer blends under solvent annealing yielded phase-separated nanodomains that resemble nanoscopically ordered structures of block copolymers, but that are more advantageous due to easily cleavable and exchangeable links between the phase-separated domains. The removal of one of the components of the precursor structure formed from the end-functionalized polymers through cleavage of complementary interactions allowed us to fabricate mono- or multilayered nanoporous structures in which the chemically useful end-functionalities of the remnant polymers are rich on the surface of the pores. The resultant, organic, nanoporous films with tailored surface functionality offer a useful platform for various chemical and biological applications.