Carbonization of quercetin into nanogels: a leap in anticoagulant development.

Quercetin, a flavonoid abundantly found in onions, fruits, and vegetables, is recognized for its pharmacological potential, especially for its anticoagulant properties that work by inhibiting thrombin and coagulation factor Xa. However, its clinical application is limited due to poor water solubility and bioavailability. To address these limitations, we engineered carbonized nanogels derived from quercetin (CNGsQur) using controlled pyrolysis and polymerization techniques. This led to substantial improvements in its anticoagulation efficacy, water solubility, and biocompatibility. We generated a range of CNGsQur by subjecting quercetin to varying pyrolytic temperatures and then assessed their anticoagulation capacities both in vitro and in vivo. Coagulation metrics, including thrombin clotting time (TCT), activated partial thromboplastin time (aPTT), and prothrombin time (PT), along with a rat tail bleeding assay, were utilized to gauge the efficacy. CNGsQur showed a pronounced extension of coagulation time compared to uncarbonized quercetin. Specifically, CNGsQur synthesized at 270 °C (CNGsQur270) exhibited the most significant enhancement in TCT, with a binding affinity to thrombin exceeding 400 times that of quercetin. Moreover, variants synthesized at 310 °C (CNGsQur310) and 290 °C (CNGsQur290) showed the most substantial delays in PT and aPTT, respectively. Our findings indicate that the degree of carbonization significantly influences the transformation of quercetin into various CNGsQur forms, each affecting distinct coagulation pathways. Additionally, both intravenous and oral administrations of CNGsQur were found to extend rat tail bleeding times by up to fivefold. Our studies also demonstrate that CNGsQur270 effectively delays and even prevents FeCl3-induced vascular occlusion in a dose-dependent manner in mice. Thus, controlled pyrolysis offers an innovative approach for generating quercetin-derived CNGs with enhanced anticoagulation properties and water solubility, revealing the potential for synthesizing self-functional carbonized nanomaterials from other flavonoids for diverse biomedical applications.

Synthesis of Fluorescent C-C Bonded Triazole-Purine Conjugates.

A design toward C-C bonded 2,6-bis(1H-1,2,3-triazol-4-yl)-9H-purine and 2-piperidinyl-6-(1H-1,2,3-triazol-4-yl)-9H-purine derivatives was established using the combination of Mitsunobu, Sonogashira, copper (I) catalyzed azide-alkyne cycloaddition, and SNAr reactions. 11 examples of 2,6-bistriazolylpurine and 14 examples of 2-piperidinyl-6-triazolylpurine intermediates were obtained, in 38-86% and 41-89% yields, respectively. Obtained triazole-purine conjugates expressed good fluorescent properties which were studied in the solution and in the thin layer film for the first time. Quantum yields reached up to 49% in DMSO for bistriazolylpurines and up to 81% in DCM and up to 95% in DMSO for monotriazolylpurines. Performed biological studies in mouse embryo fibroblast, human keratinocyte, and transgenic adenocarcinoma of the mouse prostate cell lines showed that most of obtained triazole-purine conjugates are not cytotoxic. The 50% cytotoxic concentration of the tested derivatives was in the range from 59.6 to 1528.7 µM.

Dual-emissive carbonized polymer dots for the ratiometric fluorescence imaging of singlet oxygen in living cells.

Singlet oxygen (1O2) is a type of reactive oxygen species (ROS), playing a vital role in the physiological and pathophysiological processes. Specific probes for monitoring intracellular 1O2 still remain challenging. In this study, we develop a ratiometric fluorescent probe for the real-time intracellular detection of 1O2 using o-phenylenediamine-derived carbonized polymer dots (o-PD CPDs). The o-PD CPDs possessing dual-excitation-emission properties (blue and yellow fluorescence) were successfully synthesized in a two-phase system (water/acetonitrile) using an ionic liquid tetrabutylammonium hexafluorophosphate as a supporting electrolyte through the electrolysis of o-PD. The o-PD CPDs can act as a photosensitizer to produce 1O2 upon white LED irradiation, in turn, the generated 1O2 selectively quenches the yellow emission of the o-PD CPDs. This quenching behavior is ascribed to the specific cycloaddition reaction between 1O2 and alkene groups in the polymer scaffolds on o-PD CPDs. The interior carbon core can be a reliable internal standard since its blue fluorescence intensity remains unchanged in the presence of 1O2. The ratiometric response of o-PD CPDs is selective toward 1O2 against other ROS species. The developed o-PD CPDs have been successfully applied to monitor the 1O2 level in the intracellular environment. Furthermore, in the inflammatory neutrophil cell model, o-PD CPDs can also detect the 1O2 and other ROS species such as hypochlorous acid after phorbol 12-myristate 13-acetate (PMA)-induced inflammation. Through the dual-channel fluorescence imaging, the ratiometric response of o-PD CPDs shows great potential for detecting endogenous and stimulating 1O2in vivo.

Pulsed laser irradiation induces the generation of alloy cluster ions for the screening of protease activity.

Pulsed laser irradiation can cause the fragmentation of nanoparticles, which generates cluster ions. This allows nanoparticles to be adopted as mass tag/signal amplifiers in laser desorption/ionization mass spectrometry (LDI-MS) bioassays. Herein, we demonstrate the potential of using the signal from alloy cluster ions in bioassays through a fibrin clot model to determine the activity of thrombin. A mixed solution of silver and gold nanoparticles functionalized with fibrinogen (Fg‒Ag NPs/Fg‒Au NPs) treated with thrombin can form clots composed of aggregated fibrin-Au NPs/Ag NPs. These clots analyzed with LDI-MS are noted to form intense Ag-Au alloy cluster ions, especially [Ag2Au]+, which were used to detect thrombin concentration with a dynamic range of 2.5-50 pM in human plasma. This sensing platform was further employed for the screening of direct thrombin inhibitors. This work developed a novel bioassay utilizing metallic gas-phase reactions generated from pulsed laser irradiation of aggregated nanoparticles to monitor enzymatic activity and to screen inhibitors. We believe that LDS-MS can serve as a new platform for gas-phase reaction-based bioassays.

Carbon nanogels exert multipronged attack on resistant bacteria and strongly constrain resistance evolution.

Developing antimicrobial agents that can eradicate drug-resistant (DR) bacteria and provide sustained protection from DR bacteria is a major challenge. Herein, we report a mild pyrolysis approach to prepare carbon nanogels (CNGs) through polymerization and the partial carbonization of l-lysine hydrochloride at 270 °C as a potential broad-spectrum antimicrobial agent that can inhibit biopolymer-producing bacteria and clinical drug-resistant isolates and tackle drug resistance issues. We thoroughly studied the structures of the CNGs, their antibacterial mechanism, and biocompatibility. CNGs possess superior bacteriostatic effects against drug-resistant bacteria compared to some commonly explored antibacterial nanomaterials (silver, copper oxide, and zinc oxide nanoparticles, and graphene oxide) through multiple antimicrobial mechanisms, including reactive oxygen species generation, membrane potential dissipation, and membrane function disruption, due to the positive charge and flexible colloidal structures resulting strong interaction with bacterial membrane. The minimum inhibitory concentration (MIC) values of the CNGs (0.6 µg mL-1 against E. coli and S. aureus) remained almost the same against the bacteria after 20 passages; however, the MIC values increased significantly after treatment with silver nanoparticles, antibiotics, the bacteriostatic chlorhexidine, and especially gentamicin (approximately 140-fold). Additionally, the CNGs showed a negligible MIC value difference against the obtained resistant bacteria after acclimation to the abovementioned antimicrobial agents. The findings of this study unveil the development of antimicrobial CNGs as a sustainable solution to combat multidrug-resistant bacteria.

Thermally driven formation of polyphenolic carbonized nanogels with high anticoagulant activity from polysaccharides.

We have demonstrated that alginate with negligible anticoagulant activity can be converted into carbonized nanogels with potent anticoagulant activity through a solid-state heating process. The conversion of alginate into graphene-like nanosheet (GNS)-embedded polyphenolic-alginate nanogels (GNS/Alg-NGs) has been carried out through condensation and carbonization processes. The GNS/Alg-NGs exhibit much stronger anticoagulant activity (>520-fold) compared to untreated alginate, mainly because their polyphenolic structures have a high binding affinity [dissociation constant (Kd) = 2.1 × 10-10 M] toward thrombin. In addition, the thrombin clotting time delay caused by the GNS/Alg-NGs is 10-fold longer than that of natural polyphenolic compounds, such as quercetin, catechin, naringenin, caffeic acid, and ferulic acid. The thrombin- or kaolin-activated thromboelastography of whole-blood coagulation reveals that the GNS/Alg-NGs display a much stronger anticoagulant ability than that of untreated alginate and naturally sulfated polysaccharides (fucoidan). The GNS/Alg-NGs exhibit superior biocompatibility and anticoagulant activity, as observed with an in vivo rat model, revealing their potential as a blood thinner for the treatment of thrombotic disorders.

A review on metal nanozyme-based sensing of heavy metal ions: Challenges and future perspectives.

Large scale mining, manufacturing industries, exploitation of underground water, depletion of groundwater level, and uncontrolled discharge of industrial wastes have caused severe heavy metal ion pollution to the environment throughout the world. Therefore, the rapid detection of such toxic metal ions is inevitable. However, conventional methods require sophisticated instruments and skilled manpower and are difficult to operate in on-field conditions. Recently, metal nanozyme-based assays have been found to have the potential as an alternative to conventional methods due to their portability, simplicity, and high sensitivity to detect metal ion concentration to as low as parts per trillion (ppt). Metal nanozyme-based systems for heavy metal ions enable rapid and cheap screening on the spot with a very simple instrument such as a UV-vis absorption spectrophotometer and therefore, are convenient for use in field operations, especially in remote parts of the world. The sensing mechanism of a nanozyme-based sensor is highly dependent on its surface properties and specific interactions with particular metal ion species. Such method often encounters selectivity issues, unlike natural enzyme-based assays. Therefore, in this review, we mainly focus our discussion on different types of target recognition and inhibition/enhancement mechanisms, and their responses toward the catalytic activity in the sensing of target metal ions, design strategies, challenges, and future perspectives.

Carbon quantum dots for the detection of antibiotics and pesticides.

Carbon quantum dots (CQDs) are novel nanomaterials with interesting physical and chemical properties, which are intensely studied only in the last decade. Unique properties, such as its inherent fluorescent property, high resistance to photobleaching, high surface area, ease of synthesis, flexible choice of precursor, and surface tunability enable CQDs for promising application in biosensing. Therefore, it is highly useful in clinical, forensic, medical, food and drug analyses, disease diagnosis, and various other fields of biosensing. In addition, their fluorescence properties are tunable by the interaction with certain molecules via different mechanisms, which enables their application for sensing of those molecules, such as pesticides and antibiotics. The detection of antibiotics and pesticides is especially important as they are commonly used in both the medical and agricultural fields and can affect both humans and their environment. However, these molecules do not have a specific recognition element unlike for antibodies, proteins, enzymes, and other biomarkers. Thus, the fluorescence quenching mechanism alone cannot be applied as a sensing mechanism for the CQDs-based sensing of pesticides and antibiotics. In this review, we discuss the application of various CQDs, in the detection of antibiotics, pesticides (herbicide, fungicide, insecticide), and other medicinal drugs through various detection strategies and their current limitations.

High Amplification of the Antiviral Activity of Curcumin through Transformation into Carbon Quantum Dots.

It is demonstrated that carbon quantum dots derived from curcumin (Cur-CQDs) through one-step dry heating are effective antiviral agents against enterovirus 71 (EV71). The surface properties of Cur-CQDs, as well as their antiviral activity, are highly dependent on the heating temperature during synthesis. The one-step heating of curcumin at 180 °C preserves many of the moieties of polymeric curcumin on the surfaces of the as-synthesized Cur-CQDs, resulting in superior antiviral characteristics. It is proposed that curcumin undergoes a series of structural changes through dehydration, polymerization, and carbonization to form core-shell CQDs whose surfaces remain a pyrolytic curcumin-like polymer, boosting the antiviral activity. The results reveal that curcumin possesses insignificant inhibitory activity against EV71 infection in RD cells [half-maximal effective concentration (EC50 ) >200 µg mL-1 ] but exhibits high cytotoxicity toward RD cells (half-maximal cytotoxic concentration (CC50 ) <13 µg mL-1 ). The EC50 (0.2 µg mL-1 ) and CC50 (452.2 µg mL-1 ) of Cur-CQDs are >1000-fold lower and >34-fold higher, respectively, than those of curcumin, demonstrating their far superior antiviral capabilities and high biocompatibility. In vivo, intraperitoneal administration of Cur-CQDs significantly decreases mortality and provides protection against virus-induced hind-limb paralysis in new-born mice challenged with a lethal dose of EV71.

Supramolecular Aptamers on Graphene Oxide for Efficient Inhibition of Thrombin Activity.

Graphene oxide (GO), a two-dimensional material with a high aspect ratio and polar functional groups, can physically adsorb single-strand DNA through different types of interactions, such as hydrogen bonding and π-π stacking, making it an attractive nanocarrier for nucleic acids. In this work, we demonstrate a strategy to target exosites I and II of thrombin simultaneously by using programmed hybrid-aptamers for enhanced anticoagulation efficiency and stability. The targeting ligand is denoted as Supra-TBA15/29 (supramolecular TBA15/29), containing TBA15 (a 15-base nucleotide, targeting exosite I of thrombin) and TBA29 (a 29-base nucleotide, targeting exosite II of thrombin), and it is designed to allow consecutive hybridization of TBA15 and TBA29 to form a network of TBAs (i.e., supra-TBA15/29). The programmed hybrid-aptamers (Supra-TBA15/29) were self-assembled on GO to further boost anticoagulation activity by inhibiting thrombin activity, and thus suppress the thrombin-induced fibrin formation from fibrinogen. The Supra-TBA15/29-GO composite was formed mainly through multivalent interaction between poly(adenine) from Supra-TBA15/29 and GO. We controlled the assembly of Supra-TBA15/29 on GO by regulating the preparation temperature and the concentration ratio of Supra-TBA15/29 to GO to optimize the distance between TBA15 and TBA29 units, aptamer density, and aptamer orientation on the GO surfaces. The dose-dependent thrombin clotting time (TCT) delay caused by Supra-TBA15/29-GO was >10 times longer than that of common anticoagulant drugs including heparin, argatroban, hirudin, and warfarin. Supra-TBA15/29-GO exhibits high biocompatibility, which has been proved by in vitro cytotoxicity and hemolysis assays. In addition, the thromboelastography of whole-blood coagulation and rat-tail bleeding assays indicate the anticoagulation ability of Supra-TBA15/29-GO is superior to the most widely used anticoagulant (heparin). Our highly biocompatible Supra-TBA15/29-GO with strong multivalent interaction with thrombin [dissociation constant (K d) = 1.9 × 10-11 M] shows great potential as an effective direct thrombin inhibitor for the treatment of hemostatic disorders.

In situ synthesis of core-shell carbon nanowires as a potent targeted anticoagulant.

We have developed a one-pot synthesis of bio-carbon nanowires from the natural product sodium alginate at low temperature, without using any catalyst, for anticoagulation applications. Sodium alginate is carbonized and sulfated/sulfonated in situ by solid state heating of a mixture of sodium alginate and ammonium sulfite. By regulating the heating temperature and the ratio of ammonium sulfite to sodium alginate, we modulated the degree of sulfation/sulfonation and carbonization, as well as the morphology of the carbon nanomaterials. The core-shell sulfated/sulfonated bio-carbon nanowires (CNWsAlg@SOx) made by the reaction of a mixture of ammonium sulfite and sodium alginate with a mass ratio of 5 (ammonium sulfite to sodium alginate) at 165 °C for 3 h, exhibit strong inhibition of thrombin activity due to their ultrahigh binding affinity towards it (dissociation constant (Kd) = 8.7 × 10-11 M). The possible formation mechanism of the carbon nanowires has been proposed. The thrombin-clotting time delay caused by CNWsAlg@SOx is ∼ 170 times longer than that caused by sodium alginate. Hemolysis and cytotoxicity assays demonstrated the high biocompatibility of CNWsAlg@SOx. Furthermore, the thromboelastography of whole-blood coagulation and rat-tail bleeding assays further reveal that CNWsAlg@SOx have a much stronger anticoagulation activity than sodium alginate and naturally sulfated polysaccharides (e.g., fucoidan). Our results suggest that the low-temperature prepared, cost-effective, and highly biocompatible CNWsAlg@SOx show great potential as an efficient anticoagulant for the prevention and treatment of diseases associated with thrombosis.

Nanoparticle-Based LDI-MS Immunoassay for the Multiple Diagnosis of Viral Infections.

Many serious public health emergencies around the globe are caused by viral epidemics. Thus, developing a reliable method for viral screening is in high demand. Multiplex assays for simultaneous detection and fast screening of high-risk pathogens are especially needed. This study employs metal nanoparticles to generate specific mass spectral signals for different RNA viruses, which enables simultaneous detection of whole viruses by laser desorption/ionization mass spectrometry (LDI-MS). We developed a nanoparticle-based sandwich immunosorbent assay as a sensing platform for the detection of viruses and viral nonstructural protein by LDI-MS. Cellulose acetate membrane (CAM) serves as the substrate for the fabrication of the sandwich immunosorbent assay with the advantages of clean mass spectra and high enrichment of analytes. Antibody-modified metal nanoparticles (Ab-MNPs; M = Au or Ag) act as metallic biocodes for the LDI-MS detection. The signal amplification readout for the virus is through the pulsed laser-induced formation of metal cluster ions ([M n]+; n = 1-3) from the Ab-MNPs which specifically bind on the CAM. Our sensing system is effective for the detection of intact viruses [Enterovirus 71 (EV71) and Japanese encephalitis virus (JEV)], nonstructural protein 1 (NS1) of Zika virus (ZIKV), EV71-spiked human serum samples, and the simultaneous detection of EV71 and ZIKV. Our probe efficiently detects EV71 in real clinical serum samples with >95% agreement with RT-qPCR results. This high-throughput LDI-MS viral detection system is simple, reliable, and high-throughput. We believe this platform has the potential to be employed for the routine screening of patients with viral infections.

Nanoparticle-based laser desorption/ionization mass spectrometric analysis of drugs and metabolites.

Nanoparticle-assisted laser desorption/ionization mass spectrometry (LDI-MS) is a powerful tool for the analysis of a wide range of molecules. Many of the drawbacks in the matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) can be avoided with the application of nanomaterials as matrices as well as substrates for the LDI-MS to achieve a low background noise in low m/z region and high reproducibility. Surface-assisted LDI (SALDI)-MS, especially the nanoparticle-based LDI-MS, has emerged as a promising technique for the analysis of trace amounts of substances in various biological samples due to their high surface area for analyte enrichment, efficient desorption/ionization, and homogeneous crystallization of sample. Therefore, it is highly useful in clinical, forensic, medical, food and drug analyses, disease diagnosis, and various other fields. In this review, we briefly discuss the application of various nanomaterials, which include metal-based, carbon-based, silicon-based nanomaterials and nanocomposites, as matrices and substrates for LDI-MS based drug and metabolite analyses and possible detection strategies. Also, we discuss the idea of using "mass tag" for signal amplification for drug and metabolite detection using nanoparticle assisted LDI-MS.

Self-assembled, bivalent aptamers on graphene oxide as an efficient anticoagulant.

Graphene oxide (GO) has unique structural properties, can effectively adsorb single-strand DNA through π-π stacking, hydrogen bonding and hydrophobic interactions, and is useful in many biotechnology applications. In this study, we developed a thrombin-binding-aptamers (15- and 29-mer) conjugated graphene oxide (TBA15/TBA29-GO) composite for the efficient inhibition of thrombin activity towards the formation of fibrin from fibrinogen. The TBA15/TBA29-GO composite was simply obtained by the self-assembly of TBA15/TBA29 hybrids on GO. The high density and appropriate orientation of TBA15/TBA29 on the GO surface enabled TBA15/TBA29-GO to acquire an ultrastrong binding affinity for thrombin (dissociation constant = 2.9 × 10-12 M). Compared to bivalent TBA15h20A20/TBA29h20A20 hybrids, the TBA15/TBA29-GO composite exhibited a superior anticoagulant potency (ca. 10-fold) against thrombin-mediated coagulation as a result of steric blocking effects and a higher binding affinity for thrombin. In addition, the prolonged thrombin clotting time, prothrombin time (PT), and activated partial thromboplastin time (aPTT) of TBA15/TBA29-GO were at least 2 times longer than those of commercially available drugs (heparin, argatroban, hirudin, and warfarin). The in vitro cytotoxicity and hemolysis analyses revealed the high biocompatibility of TBA15/TBA29-GO. The rat-tail bleeding assay of the hemostasis time and ex vivo PT and aPTT further revealed that TBA15/TBA29-GO is superior (>2-fold) to heparin, which is commonly used in the treatment and prevention of thrombotic diseases. Our multivalent, oligonucleotide-modified GO nanocomposites are easy to prepare, cost-effective, and highly biocompatible and they show great potential as effective anticoagulants for the treatment of thrombotic disorders.

Graphene oxide membrane as an efficient extraction and ionization substrate for spray-mass spectrometric analysis of malachite green and its metabolite in fish samples.

A graphene oxide (GO) nanosheet-modified N+-nylon membrane (GOM) has been prepared and used as an extraction and spray-ionization substrate for robust mass spectrometric detection of malachite green (MG), a highly toxic disinfectant in liquid samples and fish meat. The GOM is prepared by self-deposition of GO thin film onto an N+-nylon membrane, which has been used for efficient extraction of MG in aquaculture water samples or homogenized fish meat samples. Having a dissociation constant of 2.17 × 10-9 M-1, the GOM allows extraction of approximately 98% of 100 nM MG. Coupling of the GOM-spray with an ion-trap mass spectrometer allows quantitation of MG in aquaculture freshwater and seawater samples down to nanomolar levels. Furthermore, the system possesses high selectivity and sensitivity for the quantitation of MG and its metabolite (leucomalachite green) in fish meat samples. With easy extraction and efficient spray ionization properties of GOM, this membrane spray-mass spectrometry technique is relatively simple and fast in comparison to the traditional LC-MS/MS methods for the quantitation of MG and its metabolite in aquaculture products.

Pulse laser-induced fragmentation of carbon quantum dots: a structural analysis.

Carbon quantum dots (CQDs) have attracted enormous interest in recent years owing to their low cytotoxicity, excellent biocompatibility and strong fluorescence. They have been successfully employed in sensor, bio-imaging, and drug carrier applications. A complete understanding of their core-surface structure is essential for tuning their physical and chemical properties for various applications. Conventional characterizations of CQDs are conducted with electron microscopy or spectroscopy, such as transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and Raman spectroscopy. However, these techniques cannot fully resolve the core-surface structure of CQDs. In this study, we attempt to analyze the structures of CQDs by laser desorption/ionization mass spectrometry (LDI-MS) using three model CQDs synthesized from citric acid (CA-CQDs), diammonium citrate (AC-CQDs) and spermidine trihydrochloride (Spd-CQDs). Both CA-CQDs and AC-CQDs produced anionic carbon cluster ions ([Cn]-, n = 4-9) during the laser desorption/ionization process. Additionally, AC-CQDs produced fragments containing C, N, and O that appeared at m/z values of 41.999, 91.015, and 107.008, which were identified by 15N isotopes as [CNO]-, [CH3N2O3]-, and [CH3N2O4]-, respectively. By contrast, subjecting Spd-CQDs to the same analysis did not yield carbon cluster ions ([Cn]-); instead, strong chlorine-associated ions with a unique isotopic pattern were observed, strongly implying that Spd-CQDs contain chlorine. The lack of carbon cluster ion formation in nitrogen- and chlorine-doped Spd-CQDs indicates that nitrogen and chlorine are abundantly and homogenously doped in the CQDs. We also found a shot-dependent fragmentation behavior for AC-CQDs that produces nitrogen- and oxygen-containing ions and carbon cluster ions ([Cn]-) during initial fragmentation of the surface, with a gradual destruction of the nanocrystalline carbon core after additional shots. These results suggest that LDI-MS can be used as a tool for analyzing the core-surface structure of CQDs, particularly when it contains a heteroatom doped carbon core with various surface functional groups containing nitrogen, oxygen and halogens.

Tetramethyl-m-benziporphodimethene and isomeric alpha,beta-unsaturated gamma-lactam embedded N-confused tetramethyl-m-benziporphodimethenes.

The condensation reaction of alpha,alpha'-dihydroxy-1,3-diisopropylbenzene, pyrrole, and an aldehyde leads to the formation of tetramethyl-m-benziporphodimethene and outer alpha-pyrrolic carbon oxygenated N-confused tetramethyl-m-benziporphodimethenes containing a gamma-lactam ring in the macrocycle. Two isomers with the carbonyl group of the lactam ring either close to (O-Up) or away from (O-Down) the neighboring sp(3) meso carbon were synthesized and characterized. The single crystal X-ray diffraction analysis on the regular and gamma-lactam containing tetramethyl-m-benziporphodimethenes showed highly distorted macrocycles for all compounds. For O-Up and O-Down isomers, dimeric structures, assembling by intermolecular hydrogen-bonding interactions through lactam rings, were observed in the solid state. Fitting the concentration dependent chemical shifts of the outer NH proton using the non-linear regression method give a maximum association constant of 108.9 M(-1) for the meso 4-methylcarboxyphenyl substituted O-Down isomer. The DFT calculations concluded that the O-Up isomer is energetically more stable, and the keto form is more stable than the enol form.

Formation of a sulfur-atom-inserted N-confused porphyrin iron nitrosyl complex by denitrosation and C-S bond cleavage of an S-nitrosothiol.

The reaction of nitrosothiol, Ph3CSNO, with a divalent iron N-confused porphyrin complex, Fe(HCTPPH)Br, yields a {Fe(NO)}6 iron nitrosyl complex with a sulfur atom inserted in the Fe-C bond. The crystal structure reveals a bent Fe-N-O geometry and an eta2-(C,S) bonding mode between iron and the C-S bond. A reaction mechanism involving a transnitrosation and a nitrosothiol C-S bond cleavage is proposed.