A rational study of the influence of Mn2+-insertion in Prussian blue nanoparticles on their photothermal properties.

We investigated a series of Mn2+-Prussian blue (PB) nanoparticles NazMnxFe1-x[Fe(CN)6]1-y□y·nH2O of similar size, surface state and cubic morphology with various amounts of Mn2+ synthesized through a one step self-assembly reaction. We demonstrated by a combined experimental-theoretical approach that during the synthesis, Mn2+ substituted Fe3+ up to a Mn/Na-Mn-Fe ratio of 32 at% in the PB structure, while for higher amounts, the Mn2[Fe(CN)6] analogue is obtained. For comparison, the post-synthetic insertion of Mn2+ in PB nanoparticles was also investigated and completed with Monte-Carlo simulations to probe the plausible adsorption sites. The photothermal conversion efficiency (η) of selected samples was determined and showed a clear dependence on the Mn2+amount with a maximum efficiency for a Mn/Na-Mn-Fe ratio of 10 at% associated with a dependence on the nanoparticle concentration. Evaluation of the in vitro photothermal properties of these nanoparticles performed on triple negative human breast adenocarcinoma (MDA-MB-231) cells by using continuous and pulsed laser irradiation confirm their excellent PTT efficiency permitting low dose use.

Optimization of a Solid-Phase Extraction Procedure for the Analysis of Drug-Loaded Lipid Nanoparticles and its Application to the Determination of Leakage and Release Profiles.

To understand and predict the efficacy and toxicity of nanoparticle-based drugs in vivo, the free and entrapped forms of the drug have to be determined using suitable characterization methods. Herein, a solid-phase extraction (SPE) method combined with high-performance liquid chromatography (HPLC) measurements were used to separately quantify free and entrapped cyclosporine A (CsA) in 50 and 120 nm-sized lipid nanoparticles (NPs). Combined with colloidal stability measurements, HPLC quantification of the free and entrapped drug, separated using SPE, was used to monitor the stability of the nanotherapeutics under storage or physiological conditions. The SPE method was proven not to alter the core-shell template of the lipid nanocarriers. Method validation demonstrated suitable linearity, repeatability, accuracy, and specificity to quantify the free, entrapped, and total drug. Under storage conditions, the %free and %entrapped CsA remained constant over 9 weeks for both NPs. Under physiological conditions, the release profile was similar for both buffers/mediums used, indicating a biphasic mode of release. The validated SPE method was proven to be suitable for the determination of a wide range of free versus entrapped compounds.

Liposomes Containing Nickel-Bis(dithiolene) Complexes for Photothermal Theranostics.

New thermosensitive liposomes with a phase transition at 42 °C, containing nickel-bis(dithiolene) complexes as efficient and stable photothermal agents, have been formulated and characterized. These liposomes are highly stable and keep their contents at 37 °C for more than 30 days. On the contrary, the mild hyperthermia generated by the nickel-bis(dithiolene) complex under 940 nm NIR irradiation allows for the fine controlled release of the liposome contents, making such liposomes highly suitable for on-demand drug delivery in the human body under NIR laser irradiation. These liposomes can also be directly used, as shown here, as nanoagents for photothermal therapy. In fact, strong cell death can be generated under laser irradiation in the presence of these photothermally active nanocargos containing less than 10% w/w of metal complex. We also demonstrate, for the first time, that nickel-bis(dithiolene) complexes are good photoacoustic agents, generating easily detectable ultrasonic signals directly proportional to the concentration of complexes and the used laser power.

Development and validation of a novel UPLC-ELSD method for the assessment of lipid composition of nanomedicine formulation.

Lipid nanocarriers incorporating glycerides, polyethylene glycol (PEG)-stearates and phospholipids have attracted great attention for in vivo diagnostic, in vivo imaging, activated or non-activated targeted drug delivery. For quality control purposes, the development of appropriate methods for the quantification of their lipid components is needed. In the present study, we developed an analytical method for lipid quantification in formulated nanoparticles. PEG-stearates and glycerides were analyzed in a single run by RP-UPLC-ELSD using a two-step gradient elution program, while the analysis of phospholipids was accomplished by HILIC-UPLC-ELSD after isolation using an SPE silica column. Using both isolated compounds and commercial lipid standards, calibration curves were produced using second-order polynomials to attain the quantitative evaluation of each lipid excipient. Relative standard deviation of all analytes was between 0.9% and 5.3% for intra-day precision and recovery ranged from 83.5% to 112.2%. The presented method was successfully implemented to study the manufacturing process and stability of the formulated lipid excipients during long-term storage and accelerated conditions. The formulation lipid yield was determined and found equal to 82.5%.

Biocompatible nanoparticles containing hydrophobic nickel-bis(dithiolene) complexes for NIR-mediated doxorubicin release and photothermal therapy.

Biocompatible nanoparticles (NPs) constituted by amphiphilic poly(ethylene glycol)-block-poly(benzyl malate), PEG-b-PMLABe, have been designed for site-specific PhotoThermal Controlled Release (PTCR) of drugs thanks to the presence of a near infra-red (NIR) photothermally active nickel-bis(dithiolene) complex in the inner core of the NPs, together with doxorubicin (Dox). A nanoprecipitation technique was used to prepare well-defined nickel-bis(dithiolene) and nickel-bis(dithiolene)/Dox loaded NPs, which were characterized by dynamic light scattering (DLS), zeta-potential measurements and Transmission Electron Microscopy (TEM). We have shown that the Dox release was effectively controlled by NIR irradiation (long or pulsed NIR laser irradiation). Cytotoxicity experiments on HeLa and MDA-MB-231 cells have shown that the incorporation of more than 10 w% of nickel-bis(dithiolene) complexes does not increase the intrinsic toxicity of the polymer nanoparticles. Finally, the viability of MDA-MB-231 cells was assessed after their incubation, for 24 hours, with empty NPs, Ni4C12 loaded NPs, Dox loaded NPs or Ni4C12/Dox loaded NPs, without or with NIR irradiation. Above all, the results have highlighted that the Ni4C12 loaded NPs after 5 min NIR laser irradiation can induce strong cell death up to 80% at 50 µg mL-1. These results demonstrate that these NPs are good candidates for photothermal therapy.

Fine and Clean Photothermally Controlled NIR Drug Delivery from Biocompatible Nickel-bis(dithiolene)-Containing Liposomes.

This work demonstrates that metal-bis(dithiolene) complexes can be efficiently incorporated inside organic nanocarriers and, that under near-infrared (NIR) irradiation, their high photothermal activity can be finely used to release encapsulated drugs on demand. In contrast to gold nanoparticles and other organic NIR dyes, nickel-bis(dithiolene) complexes do not produce singlet oxygen under irradiation, a highly desirable characteristic to preserve the chemical integrity and activity of the loaded drug during the NIR-triggered release from the nanocarriers. Finally, cytotoxicity experiments performed on various cell lines have shown that the incorporation of such metal complexes do not increase the toxicity of the final liposomal formulation. These results offer great promise for the development of innovative biocompatible drug nanocargos that are able to safely deliver their content on demand under NIR laser irradiation. Moreover, this work demonstrates that metal-bis(dithiolene) complexes, owing to their versatility of functionalization and metal complexation, are attractive photothermal agents for the development of original NIR-responsive materials for application not only in biotechnology but also in materials science.

Laser triggered phase transition in photothermal liquid crystals.

Reversible high temperature phase transitions were easily induced under laser irradiation in pure thermotropic liquid crystals built around photothermal nickel-bis(dithiolene) cores. The strong photothermal activity of nickel-bis(dithiolene) liquid crystalline thin films allows reaching a temperature as high as 250 °C directly from room temperature in a few seconds with high spatial control.