RESUMEN
PURPOSE: To define factors influencing length of hospital stay (LOS) besides surgery delay. METHODS: We retrospectively analyzed 634 patients operated for hip fractures in 1-year period. Investigated characteristics were age, gender, American Society of Anesthesiologists score (ASA), time to surgery (first 48 h was considered early), type of surgery, anticoagulant therapy and non-routine pre-operative tests. Univariate and multivariable analysis were performed. p values < 0.05 were considered statistically significant. RESULTS: Median LOS was 12 days. Patients operated within 48 h had a LOS of 10 days, while patients operated after 48 h had 4 days longer LOS (p < 0.01). In multiple regression analyses, it was predicted that patients operated after 48 h with every 10 h delay to surgery had 7.3 h longer hospitalizations. All other factors did not influence the LOS. In early operation group, patients with hip arthroplasty had 3.3 days longer hospitalization compared to patients with osteosynthesis, every higher ASA score was associated with 1.4 days longer hospitalization, patients on anticoagulant therapy had 2.6 days longer LOS but surgery delay had no influence on LOS. Preinjury residence at a nursing home was associated with 4.4 days shorter hospitalizations compared to preinjury residence at home in both time frames. CONCLUSIONS: In patients operated in first 48 h longer LOS is associated with ASA, anticoagulant therapy and operation type but not with delay to surgery. If patients are operated after 48 h, surgery delay is the only factor increasing LOS.
Asunto(s)
Fracturas de Cadera , Anticoagulantes/uso terapéutico , Fracturas de Cadera/cirugía , Hospitalización , Humanos , Tiempo de Internación , Estudios RetrospectivosRESUMEN
BACKGROUND: Instrumentation of the pediatric spine is challenging due to anatomical constraints and the absence of specific instrumentation, which may result in iatrogenic injury and implant failure, especially in occipito-cervical constructs. Therefore, preoperative planning and in vitro testing of instrumentation may be necessary. METHODS: In this paper, we present a technical note on the use of 1:1 scale patient-specific 3D printed spinal models for preoperative assessment of feasibility of spinal instrumentation with conventional spinal implants in pediatric spinal pathologies. RESULTS: The printed 3D models fully matched the intraoperative anatomy and allowed a preoperative confirmation of the feasibility of the planned instrumentation with conventional screws for adult patients. In addition, the possibility of intraoperative model assessment resulted in better intraoperative sense of spinal anatomy and easier freehand screw insertion, thereby reducing the potential for iatrogenic injury. All 3D models were printed at the surgical department at a very low cost, and the direct communication between the surgeon and the dedicated specialist allowed for multiple models or special spinal segments to be printed for more detailed consideration. CONCLUSIONS: Our technical note highlights the critical steps for preoperative virtual planning and in vitro testing of spinal instrumentation on patient-specific 3D printed models at 1:1 scale. The simple and affordable method helps to better visualize pediatric spinal anatomy and confirm the suitability of preplanned conventional spinal instrumentation, thereby reducing X-ray exposure and intraoperative complications in freehand screw insertion without navigation.
Asunto(s)
Tornillos Pediculares , Fusión Vertebral , Cirugía Asistida por Computador , Adulto , Niño , Humanos , Enfermedad Iatrogénica , Columna Vertebral , Tomografía Computarizada por Rayos XRESUMEN
PURPOSE: Hypoxia is a well-known complication in cemented arthroplasty; however, it is not known whether the level of hypoxia is related to the intramedullary pressure or to the age of the patient; therefore, we studied the intramedullary pressure and level of hypoxia in patients undergoing cemented arthroplasty. METHODS: A prospective study was performed during cemented arthroplasties in 25 patients with an average age of 66.2 ± 12.1 years old. The intramedullary pressure (IMP) was measured by placing a pressure transducer within the bone while simultaneously measuring the pulse oximetry arterial oxygen saturation (SpO2), pulse, and blood pressure. These variables were obtained immediately after spinal anaesthesia, five minutes after cementation, and 15 minutes after prosthesis insertion. RESULTS: One hundred percent of patients had hypoxia at some level, but 83% of elderly patients (older than 66.5 years) had hypoxia (SpO2 <94%) as compared to only 23% of younger patients (p = 0.006). In the group of young patients, IMP was roughly increased 32 times as compared with baseline level, with as consequences a decrease of 4% of SpO2 (from 98.3 to 94.15%); in the elderly group, the IMP was only increased 20 times, but a decrease of 6% of SpO2 (from 97.25 to 91%) was observed. CONCLUSIONS: This series demonstrated higher hypoxia in elderly healthy patients despite a paradoxical lower femoral increase of intramedullary pressure as compared with younger patients. This hypoxia is probably not only related to the cement but also to the patient's age with decline of maximum oxygen uptake capacity and increase bone porosity. CLINICAL TRIALS: ClinicalTrials.gov Identifier: NCT03930537 https://clinicaltrials.gov/ct2/show/NCT03930537.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Prótesis de Cadera , Anciano , Artroplastia de Reemplazo de Cadera/efectos adversos , Cementos para Huesos , Cementación , Humanos , Hipoxia/epidemiología , Hipoxia/etiología , Persona de Mediana Edad , Oxígeno , Consumo de Oxígeno , Estudios ProspectivosRESUMEN
PURPOSE: To test the effect of 3D printed implants, designed according to surgeon's individual plan, on the accuracy of reduction of an acetabular fracture model. METHODS: Seven identical standardized plastic bone models of an anterior column/posterior hemi-transverse acetabular fracture were used. A CT of one plastic fracture model was made. Using preoperative planning software, three surgeons independently planned the reduction and fixation procedure and designed implants and drill guides. The designed implants and guides were then 3D printed. Each surgeon first executed his plan using his 3D printed plates and guides on one fracture model and then performed another procedure on an identical model with standard implants and instrumentation. Displacement of the fragments at the weight-bearing fracture lines in the acetabulum was measured after fixation. Linear mixed effect models were used to evaluate the effect of different solutions to the same fracture pattern. RESULTS: Mean (SD) displacement of the fracture line between the ischium and stable fragment was 1.1 (0.9) mm for the standard implant and 0.8 (0.6) mm for the 3D printed implant, while the displacements of the fracture line between the stable fragment and anterior column were 0.6 (0.6) and 0.3 (0.3) for the standard and 3D printed methods, respectively (p < 0.001). Mean (SD) fracture line step-off at any fracture line for the standard implant was 1.2 (0.9) mm and 0.4 (0.4) mm for the 3D printed implant (p = 0.022). CONCLUSIONS: Patient-specific 3D printed plates and drill guides may facilitate retaining accurate reduction and fixation of select acetabular fracture patterns.
Asunto(s)
Fracturas Óseas , Fracturas de Cadera , Acetábulo/cirugía , Placas Óseas , Tornillos Óseos , Fijación Interna de Fracturas , Fracturas Óseas/diagnóstico por imagen , Fracturas Óseas/cirugía , Humanos , Impresión TridimensionalRESUMEN
PURPOSE: The aim of this article is to present history, state of the art, and future trends in the treatment of acetabular fractures. METHODS: Review of recent and historical literature. RESULTS: Acetabular fractures are difficult to treat. The first descriptions of this injury already appeared in ancient Greek history, but intensive development started in the second half of the twentieth century after Judet and Letournel's seminal work. Their classification is still the gold standard today. It is actually a pre-operative planning system and is used to determine the most appropriate surgical approach. The therapy of choice for dislocated fractures is open reduction and internal fixation. Recent modern techniques based on high-tech computerized planning systems and 3D printing have been successfully integrated into orthopaedic trauma practice. CONCLUSION: There is no ideal surgical approach for acetabulum fracture treatment, so new approaches have been developed in recent decades. The best outcome series have shown good or excellent results, between 70 and 80%.
Asunto(s)
Fracturas Óseas , Fracturas de Cadera , Fracturas de la Columna Vertebral , Acetábulo/lesiones , Acetábulo/cirugía , Fijación Interna de Fracturas , Fracturas Óseas/epidemiología , Fracturas Óseas/cirugía , Humanos , Impresión Tridimensional , Resultado del TratamientoRESUMEN
OBJECTIVE: The objective of this prospective study was to determine the optimal timing for surgical decompression (SD) in patients with acute traumatic cervical spinal cord injury (tSCI) within the first 24 hours of injury. METHODS: In successive patients with fracture and/or dislocation of the subaxial cervical spine and American Spinal Injury Association Impairment Scale (AIS) grades A-C, receiver operating characteristic curve analysis was used to determine the optimal timing for SD within the first 24 hours of cervical tSCI to obtain a neurological recovery of at least two AIS grades. Multivariate logistic regression was used to model significant neurological recovery with time to SD, degree of spinal canal compromise (SCC), and severity of injury. RESULTS: In this cohort of 64 patients, the optimal timing for SD to obtain a significant neurological improvement was within 4 hours of injury (95% confidence interval 4-9 hours). Increasing the delay from injury to SD or the degree of SCC significantly reduced the likelihood of significant neurological improvement. Due to the strong correlation with SCC, the severity of injury was a marginally significant predictor of neurological recovery. CONCLUSIONS: These findings indicate that in patients with acute cervical tSCI and AIS grades A-C, the optimal timing for SD is within the first 4-9 hours of injury, depending on the degree of SCC and the severity of injury. Further studies are required to better understand the interrelationships among the timing of SD, injury severity, and degree of SCC in these patients.
RESUMEN
Dislocation after hip arthroplasty is still a major concern. Recent study of the volumetric wear of the cup has suggested that stresses studied in a one-legged stance model could predispose arthroplasty dislocation. The aim of this work was to study whether biomechanical parameters of contact stress distribution in total hip arthroplasty during a neutral hip position can predict a higher possibility of the arthroplasty dislocating. Biomechanical parameters were determined using 3-dimensional mathematical models of the one-legged stance within the HIPSTRESS method. Geometrical parameters were measured from standard anteroposterior X-ray images of the pelvis and proximal femora. Fifty-five patients subjected to total hip arthroplasty that later suffered dislocation of the head and, for comparison, ninety-four total hip arthroplasties that were functional at least 10 years after the implantation, were included in the study. Arthroplasties that suffered dislocation had on average a 6% higher resultant hip force than the control group (p = 0.004), 11% higher peak stress on the load-bearing area (p = 0.001) and a 50% more laterally positioned stress pole (p = 0.026), all parameters being less favorable in the group of unstable arthroplasties. There was no statistically significant difference in the gradient index or in the functional angle of the weight bearing. Our study showed that arthroplasties that show a tendency to push the head out of the cup in the representative body position-the one-legged stance-are prone to dislocation. An unfavorable resultant hip force, peak stress on the load bearing and laterally positioned stress pole are predictors of arthroplasty dislocation.
Asunto(s)
Artroplastia de Reemplazo de Cadera/efectos adversos , Fémur/diagnóstico por imagen , Luxación de la Cadera/etiología , Pelvis/diagnóstico por imagen , Anciano , Femenino , Luxación de la Cadera/diagnóstico por imagen , Humanos , Masculino , Persona de Mediana Edad , Modelos Teóricos , Diseño de Prótesis , Falla de Prótesis , Radiografía , Estudios Retrospectivos , Estrés MecánicoRESUMEN
Intraosseous lipomas are rare benign bone neoplasms with an incidence of less than 0.1%; origin in the calcaneus has been reported in only a few patients. First-line treatment remains conservative, but several surgical techniques have also been described. We describe a 44-year-old woman with increasing pain in her left heel for a year and a half, who noticed swelling on the lateral side of the calcaneus. The patient underwent radiography, magnetic resonance imaging, and computed tomography of her left foot, which was suspicious for an intraosseous lipoma with a threatening calcaneal fracture. We performed a surgical procedure, curettage of the tumor, spongioplastics (by autologous bone transplant and ß-tricalcium phosphate), and internal stabilization with a calcaneal plate considering the goal of immediate postoperative weightbearing. Histologic examination confirmed an intraosseous lipoma of the calcaneus. The patient's pain was relieved immediately after surgery. Internal stabilization of the calcaneus allowed the patient to immediately fully weightbear and to return to usual daily activities. Although a benign bone tumor, intraosseous lipoma can cause many complications, such as persistent pain, decreased function, or even pathologic fracture as a result of calcaneal bone weakening. Choosing an appropriate treatment is still controversial. Conservative treatment is the first option, but for patients with severe problems and threatening fracture, surgery is necessary. Internal fixation for stabilization enables immediate postoperative weightbearing and shortens recovery time.
Asunto(s)
Neoplasias Óseas/cirugía , Placas Óseas , Calcáneo/cirugía , Fracturas Espontáneas/prevención & control , Lipoma/cirugía , Adulto , Neoplasias Óseas/complicaciones , Legrado , Femenino , Humanos , Ilion/trasplante , Lipoma/complicacionesRESUMEN
BACKGROUND: Early diagnosis of acute posttraumatic osteomyelitis (POM) is of vital importance for avoiding devastating complications. Diagnosing POM is difficult due to the lack of a highly specific and sensitive test, such as in myocardial infarct, stroke and intracranial bleeding. Serum inflammatory markers, C-reactive protein (CRP), procalcitonin (PCT), white blood cells (WBC) can support clinical findings but they are not able to differentiate between inflammatory response to infection and the host response to non-infection insult with high specificity and sensitivity. AIM: The objectives of the study were to investigate whether the biochemical and immunoinflammatory patient profile could facilitate postoperative monitoring, guide the antibiotic treatment and timing of revision surgery. PATIENTS AND METHODS: This prospective nonrandomised cohort study included 86 patients after high-energy injury to the shin requiring primary surgical treatment (open or closed reduction and internal fixation of tibial fracture). Values of the biochemical and immunoinflammatory profile were measured on admission (ADD), first postoperative day (POD1) and fourth-postoperative day (POD4). RESULTS: We discovered on our sample that the development of POM is associated with increased CRP on ADD, POD1 and decreased albumins on POD4. Further studies are needed to prove that these differences can be useful in diagnosing the risk of infection. The assessment of other important risk factors such as: the extent of soft tissue damage, multiple fractures, transfusion rate, need for conversion primary external fixation to intramedullary (IM) nailing or locking plate fixation can empower our clinical judgment of POM. CONCLUSIONS: We can improve prediction of posttraumatic osteomyelitis by using the perioperative inflammatory biomarker CRP in combination with postoperative albumins levels and other associated independent risk factors.
Asunto(s)
Proteína C-Reactiva/metabolismo , Osteomielitis/sangre , Complicaciones Posoperatorias/sangre , Albúmina Sérica Humana/metabolismo , Infección de la Herida Quirúrgica/sangre , Fracturas de la Tibia/sangre , Reacción de Fase Aguda/sangre , Adulto , Femenino , Fijación Interna de Fracturas , Humanos , Masculino , Persona de Mediana Edad , Osteomielitis/etiología , Osteomielitis/fisiopatología , Periodo Posoperatorio , Valor Predictivo de las Pruebas , Estudios Prospectivos , Infección de la Herida Quirúrgica/fisiopatología , Fracturas de la Tibia/inmunología , Fracturas de la Tibia/fisiopatología , Fracturas de la Tibia/cirugíaRESUMEN
BACKGROUND: Calcaneal fractures are relatively rare and difficult to treat. Treatment options vary based on the type of fracture and the surgeon's experiences. In recent years, surgical procedures have increasingly been used due to the better long-term results. We present a case where guided tissue regeneration was performed in a calcaneal fracture that needed primary subtalar arthrodesis. We used the principles of guided tissue regeneration from oral surgery to perform primary subtalar arthrodesis and minimize the risk of non-union. We used a heterologous collagen membrane, which acts as a mechanical barrier and protects the bone graft from the invasion of unwanted cells that could lead to non-union. The collagenous membrane also has osteoconductive properties and is therefore able to increase the osteoblast proliferation rate. CASE PRESENTATION: A 62-year-old Caucasian woman sustained multiple fractures of her lower limbs and spine after a fall from a ladder. Her left calcaneus had a comminuted multifragmental fracture (Sanders type IV) with severe destruction of the cartilage of her subtalar joint and depression of the Böhler's angle. Therefore, we performed primary arthrodesis of her subtalar joint with elevation of the Böhler's angle using a 7.3 mm titanium screw, a heterologous cortico-cancellous collagenated pre-hydrated bone mix, a heterologous cancellous collagenated bone wedge, and a heterologous collagen membrane (Tecnoss®, Italy). The graft was fully incorporated 12 weeks after the procedure and a year and a half later our patient walks without limping. We present a new use of guided tissue regeneration with heterologous materials that can be used to treat extensive bone defects after bone injuries. CONCLUSIONS: We believe that guided tissue regeneration using heterologous materials, including a heterologous collagen membrane that presents a mechanical barrier between soft tissues and bone as well as a stimulative component that enhances bone formation, could be more often used in bone surgery.
Asunto(s)
Artrodesis/métodos , Trasplante Óseo/métodos , Calcáneo/cirugía , Colágeno , Fracturas Óseas/cirugía , Fracturas Conminutas/cirugía , Regeneración Tisular Dirigida/métodos , Articulación Talocalcánea/cirugía , Accidentes por Caídas , Regeneración Ósea , Tornillos Óseos , Calcáneo/lesiones , Femenino , Humanos , Persona de Mediana Edad , Articulación Talocalcánea/lesiones , Trasplante HeterólogoRESUMEN
OBJECTIVES: There is substantial variation in the classification and management of scapula fractures. The first purpose of this study was to analyze the interobserver reliability of the OTA/AO classification and the New International Classification for Scapula Fractures. The second purpose was to assess the proportion of agreement among orthopaedic surgeons on operative or nonoperative treatment. DESIGN: Web-based reliability study. SETTING: Independent orthopaedic surgeons from several countries were invited to classify scapular fractures in an online survey. PARTICIPANTS: One hundred three orthopaedic surgeons evaluated 35 movies of three-dimensional computerized tomography reconstruction of selected scapular fractures, representing a full spectrum of fracture patterns. MAIN OUTCOME MEASUREMENTS: Fleiss kappa (κ) was used to assess the reliability of agreement between the surgeons. RESULTS: The overall agreement on the OTA/AO classification was moderate for the types (A, B, and C, κ = 0.54) with a 71% proportion of rater agreement (PA) and for the 9 groups (A1 to C3, κ = 0.47) with a 57% PA. For the New International Classification, the agreement about the intraarticular extension of the fracture (Fossa (F), κ = 0.79) was substantial and the agreement about a fractured body (Body (B), κ = 0.57) or process was moderate (Process (P), κ = 0.53); however, PAs were more than 81%. The agreement on the treatment recommendation was moderate (κ = 0.57) with a 73% PA. CONCLUSIONS: The New International Classification was more reliable. Body and process fractures generated more disagreement than intraarticular fractures and need further clear definitions.
Asunto(s)
Fracturas Óseas/clasificación , Fracturas Óseas/terapia , Escápula/lesiones , Femenino , Fracturas Óseas/diagnóstico por imagen , Fracturas Óseas/cirugía , Humanos , Imagenología Tridimensional , Masculino , Variaciones Dependientes del Observador , Reproducibilidad de los Resultados , Escápula/diagnóstico por imagen , Tomografía Computarizada por Rayos XRESUMEN
Operative fixation of fragments in acetabular fracture treatment is not strong enough to allow weight bearing before the bone is healed. In some patients, even passive or active nonweight-bearing exercises could lead to dislocation of fragments and posttraumatic osteoarthritis. Therefore, early rehabilitation should avoid loading the acetabulum in the regions of fracture lines. The aim of the paper is to estimate acetabular loading in nonweight-bearing upright, supine, and side-lying leg abduction. Three-dimensional mathematical models of the hip joint reaction force and the contact hip stress were used to simulate active exercises in different body positions. The absolute values of the hip joint reaction force and the peak contact hip stress are the highest in unsupported supine abduction (1.3 MPa) and in side-lying abduction (1.2 MPa), lower in upright abduction (0.5 MPa), and the lowest in supported supine abduction (0.2 MPa). All body positions the hip joint reaction force and the peak contact hip stress are the highest in the posterior-superior quadrant of acetabulum, followed by anterior-superior quadrant, posterior-inferior quadrant, and finally anterior-inferior quadrant. Spatial distribution of the average acetabular loading shows that early rehabilitation should be planned according to location of the fracture lines.
Asunto(s)
Acetábulo/fisiología , Articulación de la Cadera/fisiología , Modelos Biológicos , Movimiento/fisiología , Contracción Muscular/fisiología , Músculo Esquelético/fisiología , Postura/fisiología , Fuerza Compresiva/fisiología , Simulación por Computador , Humanos , Equilibrio Postural/fisiología , Rango del Movimiento Articular , Estrés Mecánico , Resistencia a la Tracción/fisiología , Soporte de Peso/fisiologíaRESUMEN
An experimental computer program for virtual operation of fractured pelvis and acetabulum based on real data of the fracture is presented. The program consists of two closely integrated tools, the 3D viewing tools and the surgeon simulation tools. Using 3D viewing tools the virtual model of a fractured pelvis is built. This procedure is performed by computer engineers. Data from CT of a real injury in DICOM format are used. With segmentation process each fracture segment becomes a separate object and is assigned a different colour. The virtual object is then transferred to the personal computer of the surgeon. Bone fragments can be moved and rotated in all three planes and reduction is performed. After reduction, fixation can be undertaken. The appropriate ostheosynthetic material can be chosen. Contouring of the plate is performed automatically to the reduced pelvis. The screws can be inserted into the plate or across the fracture. The direction and length of the screws is controlled by turning the pelvis or by making bones more transparent. The modeling of the plate in all three axes can be recorded as the exact length of the screws. There is also a simulation tool for intraoperative C-arm imaging in all directions. All the steps of the procedure are recorded and printed out. Postoperative matching of real operation and virtual procedure is also possible. We operated on 10 cases using virtual preoperative planning and found it very useful. The international study is still in progress. One case is presented demonstrating all the possibilities of the virtual planning and surgery. The presented computer program is an easily usable application which brings significant value and new opportunities in clinical practice (preoperative planning), teaching and research.