Development of Static Mixers for Millireactors and Their Production by Vat Photopolymerization.

The addition of static mixers within reactors leads to higher productivity of a process and an additional increase in mass and energy transfer. In this study, we developed millireactors with static mixers using stereolithography, an additive manufacturing technology. Computational fluid dynamics (CFD) simulations were conducted to study the flow, identify potential dead volumes, and optimize the design of the millireactors. We produced five millireactors with various static mixers and one tubular reactor without static mixers, which served as a reference. The Fenton reaction was performed as a model reaction to evaluate the performance of the millireactors. We observed that some of the reactors with static mixers had air plugs that created a significant dead volume but still exhibited higher conversions compared to the reference reactor. Our results demonstrate the potential of stereolithography for producing intricate millireactors with static mixers, which can enhance the productivity of chemical processes.

Investigating the thermal and mechanical properties of novel LDPE/TiO2 and LDPE/TiO2/CNT composites for 3D printing applications.

The development of new materials is essential for advancing technology and improving the quality of life. With new materials, we can create products that are stronger, more durable, and more efficient. The ongoing research and development of new materials for 3D printing applications continue to drive innovation in various fields, leading to improved products and processes with great benefits. The main goal of this work was to produce a functional filament with a 1.75-mm diameter that may be used for 3D printing. Composite materials were prepared using a low-density polyethylene (LDPE) resin as polymer matrix, and titanium dioxide (TiO2) and carbon nanotubes (CNT) as fillers in various ratios. Up to 15 wt% of TiO2 and 0.25 wt% of CNT were added. Some of the greatest difficulties with high filler content composites are achieving good homogeneity, and in the case of the 3D printing, greatest difficulties are producing the filament with a specific and stable filament diameter. During the 3D printing itself, the fillers can also often cause the nozzle clogging. This paper reports findings of thermal and mechanical properties of the LDPE/TiO2/CNT composites which are significant for the 3D printing process and the applicability of the composite materials. All of the planed composite materials are successfully prepared and 3D printed into the tensile test specimens. The melting point shift caused by the addition of fillers did not show consistent pattern at differential scanning calorimetry, as all of the samples had melting temperatures around 113.5 ± 1.4 °C. The addition of filler, according to the TGA, increased the threshold temperature for the material decomposition, in case of TiO2 5.4 °C increase, while TiO2 and CNT combination increased the threshold temperature for 6.8 °C. The results of the tensile test show a general increase trend with addition of TiO2 filler but do not show to a trend for the tensile strength as a result of the addition of CNT filler. The sample with highest TiO2 filler ratio of 15% (LDPE 15T0C) showed the greatest tensile strength of 14.5 MPa, compared to the 13.0 MPa of pure LDPE. The sample with 5% of TiO2 filler and 0.1% of CNT filler (LDPE 5T0.1C) showed the greatest elongation of 73.9%, compared to the 68.9% of pure LDPE.

Thermal and Mechanical Characterization of the New Functional Composites Used for 3D Printing of Static Mixers.

This paper investigates the possibility of integrating the combination of nanofillers, titanium dioxide (TiO2) and carbon nanotubes (CNT) into the thermoplastic polymer matrix. This combination of fillers can possibly modify the physico-chemical properties of composites compared to the pure polymer matrix. The composites were blended using the extrusion method. The composite filament produced was used to manufacture static mixers on a 3D printer using the additive manufacturing technology fused filament fabrication (FFF). The aim of this work was to inspect the influence of the filler addition on the thermal and mechanical properties of glycol-modified polyethylene terephthalate (PET-G) polymer composites. The fillers were added to the PET-G polymer matrix in several ratios. Tensile test results showed an increase in the overall strength and decrease in the elongation at break of the material. Melt flow rate (MFR) showed a decrease in the viscosity with the initial filler addition and reaching a plateau after 2 wt% filler was added. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) showed minor changes in the thermal properties. Scanning electron microscope (SEM) results showed homogenous distribution of the filler in the matrix and strong filler-matrix adhesion. The results indicate suitable properties of new functional composites for the 3D printing of static mixers for application in tubular reactors.