We investigated absorption and field enhancements of shallow nanocavities on top of high-aspect-ratio dielectric pillars in the infrared range. The structure includes a high-aspect-ratio nanopillar array of high refractive index, with nano-cavities on top of the pillars, and a metal plane at the bottom. The enhancement factor of electric field intensity reaches 3180 in the nanocavities and peak absorption reaches 99%. We also investigated the finite-size effect of the presented structure to simulate real experiments. Due to its narrow absorption bandwidth 3.5 nm, it can work as a refractive index sensor with sensitivity 297.5 nm/RIU and figure of merit 85. This paves the way to directly control light field at the nanoscales in the infrared light range. The investigated nanostructure will find applications in multifunctional photonics devices such as chips for culturing cells, refractive index sensors, biosensors of single molecule detection and nonlinear sensors.
AlGaAs-on-insulator (AlGaAs-OI) has recently emerged as a promising platform for nonlinear optics at the nanoscale. Among the most remarkable outcomes, second-harmonic generation (SHG) in the visible/near infrared spectral region has been demonstrated in AlGaAs-OI nanoantennas (NAs). In order to extend the nonlinear frequency generation towards the short wave infrared window, in this work we propose and demonstrate via numerical simulations difference frequency generation (DFG) in AlGaAs-OI NAs. The NA geometry is finely adjusted in order to obtain simultaneous optical resonances at the pump, signal and idler wavelengths, which results in an efficient DFG with conversion efficiencies up to 0.01%. Our investigation includes the study of the robustness against random variations of the NA geometry that may occur at fabrication stage. Overall, these outcomes identify what we believe to be a new potential and yet unexplored application of AlGaAs-OI NAs as compact devices for the generation and control of the radiation pattern in the near to short infrared spectral region.
We investigate transient, photo-thermally induced metasurface effects in a planar thin-film multilayer based on a phase-transition material. Illumination of a properly designed multilayer with two obliquely incident and phase-coherent pulsed pumps induces a transient and reversible temperature pattern in the phase-transition layer. The deep periodic modulation of the refractive index, caused by the interfering pumps, produces a transient Fano-like spectral feature associated with a guided-mode resonance. A coupled opto-thermal model is employed to analyze the temporal dynamics of the transient metasurface and to evaluate its speed and modulation capabilities. Using near-infrared pump pulses with peak intensities of the order of 100â MW/cm2 and duration of a few picoseconds, we find that the characteristic time scale of the transient metasurface is of the order of nanoseconds. Our results indicate that inducing transient metasurface effects in films of phase-transition materials can lead to new opportunities for dynamic control of quality (Q)-factor in photonic resonances, and for light modulation and switching.
The surface plasmon resonance (SPR) technique is a well-known optical method that can be used to measure the refractive index of organic nano-layers adsorbed on a thin metal film. Although there are many configurations for measuring biomolecular interactions, SPR-based techniques play a central role in many current biosensing experiments, since they are the most suited for sensitive and quantitative kinetic measurements. Here we give some results from the analysis and numerical elaboration of SPR data from integrated optics experiments in a particular borosilicate glass, chosen for its composition offering the rather low refractive index of 1.4701 at 633 nm wavelength. These data regard the flow over the sensing region (metal window) of different solutions with refractive indexes in the range of interest (1.3÷1.5) for the detection of contaminants in aqueous solutions. After a discussion of the principles of SPR, of the metal window design optimization by means of optical interaction numerical modeling, and of waveguide fabrication techniques, we give a description of system setup and experimental results. Optimum gold film window thickness and width in this guided-wave configuration has been for the first time derived and implemented on an integrated optic prototype device. Its characterization is given by means of the real time waveguide output intensity measurements, which correspond to the interaction between the sensing gold thin film window and the flowing analyte. The SPR curve was subsequently inferred. Finally, a modified version of the device is reported, with channel waveguides arranged in a Y-junction optical circuit, so that laser source stability requirements are lowered by a factor of 85 dB, making possible the use of low cost sources in practical applications.
Producing channel waveguides requires a photolithographic mask, but the standard technique of using thermally evaporated metal films for proton exchange has proved to be unsuitable for withstanding the rather aggressive process of reverse proton exchange. We report the fabrication of a nonstoichiometric silica mask by ion-plating plasma-assisted deposition. This mask is strong enough to resist both direct and reverse proton exchange and is also compatible with anisotropic dry etching for patterning the mask and with electric field poling. Our technique is a practical alternative to the use of SiO2 sputtered masks.
