RESUMEN
The investigation of ultrafast dynamics, taking place on the few to sub-picosecond time scale, is today a very active research area pursued in a variety of scientific domains. With the recent advent of X-ray free-electron lasers (XFELs), providing very intense X-ray pulses of duration as short as a few femtoseconds, this research field has gained further momentum. As a consequence, the demand for access strongly exceeds the capacity of the very few XFEL facilities existing worldwide. This situation motivates the development of alternative sub-picosecond pulsed X-ray sources among which femtoslicing facilities at synchrotron radiation storage rings are standing out due to their tunability over an extended photon energy range and their high stability. Following the success of the femtoslicing installations at ALS, BESSY-II, SLS and UVSOR, SOLEIL decided to implement a femtoslicing facility. Several challenges were faced, including operation at the highest electron beam energy ever, and achievement of slice separation exclusively with the natural dispersion function of the storage ring. SOLEIL's setup also enables, for the first time, delivering sub-picosecond pulses simultaneously to several beamlines. This last feature enlarges the experimental capabilities of the facility, which covers the soft and hard X-ray photon energy range. In this paper, the commissioning of this original femtoslicing facility is reported. Furthermore, it is shown that the slicing-induced THz signal can be used to derive a quantitative estimate for the degree of energy exchange between the femtosecond infrared laser pulse and the circulating electron bunch.
RESUMEN
It is now well established that laser plasma acceleration (LPA) is an innovative and good candidate in the beam acceleration field. Relativistic beams are indeed produced up to several GeV but their quality remains to be demonstrated in the highly demanding case of free-electron lasers (FELs). Several experiments have already shown the feasibility of synchrotron radiation delivery based on LPA but free-electron lasing has still to be achieved. Since the quality of the LPA beam inside the undulator is the critical issue, any LPA-based FEL experiment requires a refined characterization of the beam properties along the transport line and of the photon beam at the undulator exit. This characterization relies on diagnostics which must be adapted to the LPA specificities. Here, the electron and photon diagnostics already used on LPAs and required for LPA-based FELs are reviewed, and the critical points are illustrated using recent experiments performed around the world.
RESUMEN
Removal of the undesired time-energy correlations in the electron beam is of paramount importance for efficient lasing of a high-gain free-electron laser. Recently, it has been theoretically and experimentally demonstrated that the longitudinal wakefield excited by the electrons themselves in a corrugated structure allows for precise control of the electron beam phase space. In this Letter, we report the first utilization of a corrugated structure as a beam linearizer in the operation of a seeded free-electron laser driven by a 140 MeV linear accelerator, where a gain of â¼10 000 over spontaneous emission was achieved at the second harmonic of the 1047 nm seed laser, and a free-electron laser bandwidth narrowing by 50% was observed, in good agreement with the theoretical expectations.
RESUMEN
Working with wavelengths shorter than the deep ultraviolet involves the development of dedicated optics for free-electron lasers with devoted coating techniques and characterizations. High-performance deep-ultraviolet optics are specially developed to create low-loss, high-reflectivity dielectric mirrors with long lifetimes in harsh synchrotron radiation environments. In February 2001, lasing at 189.7 nm, the shortest wavelength obtained so far with free-electron-laser oscillators, was obtained at the European Free-electron-laser project at ELETTRA Synchrotron Light Laboratory, Trieste, Italy. In July 2001, 330-mW extracted power at 250 nm was measured with optimized transmission mirrors. Research and development of coatings correlated to lasing performance are reported.
