A mononuclear four-coordinate Co(II) complex with a [CoIIO4] core, namely, PPN[Li(MeOH)4][Co(L)2] (1) (PPN = bis(phosphoranediyl)iminium; H2L = perfluoropinacol), has been studied by X-ray crystallography, magnetic characterization, and theoretical calculations. This complex presents a severely distorted coordination geometry. The O-Co-O bite angle is 83.42°/83.65°, and the dihedral twist angle between the O-Co-O chelate planes is 55.6°. The structural distortion results in a large easy-axis magnetic anisotropy with D = -104(1) cm-1 and a transverse component with |E| = +4(2) cm-1. Alternating current (ac) susceptibility measurements demonstrate that 1 exhibits slow relaxation of magnetization at zero static field. However, the frequency-dependent out-of-phase (χ"M) susceptibilities of 1 at 0 Oe do not show a characteristic maximum. Upon the application of a dc field or the dilution with a diamagnetic Zn matrix, the quantum tunneling of magnetization (QTM) process can be successfully suppressed. Notably, after dilution with the Zn matrix, the obtained sample exhibits a structure different from that of the pristine complex. In this altered sample, the asymmetric unit does not contain the Li(MeOH)4+ cation, resulting in an O-Co-O bite angle of 86.05° and a dihedral twist angle of 75.84°, thereby leading to an approximate D2d symmetry. Although such differences are not desirable for magnetic studies, this study still gives some insights. Theoretical calculations reveal that the D parameter is governed by the O-Co-O bite angle, in line with our previous report for other tetrahedral Co(II) complex with a [CoIIN4] core. On the other hand, the rhombic component is found to increase as the dihedral angle deviates from 90°. These findings provide valuable guidelines for fine-tuning the magnetic properties of Co(II) complexes.
D-A type axially chiral biphenyl luminescent molecules are directly constructed through ingenious functionalization of the octahydro-binaphthol skeleton without optical resolution. The circularly polarized organic light-emitting diodes based on them display remarkable circularly polarized electroluminescence emission, a high luminance of >10â¯000 cd m-2, a maximum external quantum efficiency of 6.6%, and an extremely low-efficiency roll-off. This work provides a universal strategy for developing efficient and diverse axially chiral biphenyl emitters.
Single-step ethylene (C2H4) production from acetylene (C2H2), ethylene (C2H4), and ethane (C2H6) mixtures was realized via the strategy of a flow channel with recognition corners in MOF NTUniv-64. Both the uptake amounts and the enthalpy of adsorption (Qst) showed the same order of C2H2 > C2H6 > C2H4. Breakthrough testing also verified the above data and the C2H4 purification ability. Grand Canonical Monte Carlo (GCMC) simulations indicated that uneven corners could precisely detain C2H2 and C2H6, in which the C-H···π interaction distance between C2H2 (2.84 Å) and C2H6 (3.03 Å) and the framework was shorter than that of C2H4 (3.85 Å).
One-step C2H4 purification from a mixture of C2H2/C2H4/C2H6 could be achieved by metal-organic framework (MOF) NTUniv-70 with an F-functional group. The selectivities of C2H4/C2H6 and C2H4/C2H2 of NTUnvi-70 based on ideal adsorbed solution theory were at least twice that of the original MOF platform, which was in line with the enthalpy of adsorption (Qst) and breakthrough testing. Grand canonical Monte Carlo simulations indicated that the C-H···F interactions played an important role in enhanced C2H4/C2H6 and C2H4/C2H2 adsorption selectivities.
The concept of an expanding MOF with unexpanded channel size was realized in MOF NTUniv-61 by the utilization of a ketone-functional-group-decorated semirigid ligand and pillar-layer platform. After this unusual expansion, the preferential C2H6 adsorption was preserved via the unchanged pore size, and the functional group was inserted into the MOF. Interestingly, the C2H2 uptake ability, C2H4 selective adsorption ability, and structural stability were obviously enhanced due to the incorporation of the ketone functional group, which were further verified by isosteric heats of adsorption (Qst), GCMC modeling, and breakthrough experiments.
One-step C2H4 purification from a mixture of C2H2/C2H4/C2H6 by physical adsorption separation was realized via creating an ethane trap in MOF NTUniv-63 by the utilization of a ketone-decorated semirigid ligand, which has further been verified by the breakthrough experiment, isosteric heats of adsorption (Qst), and Grand Canonical Monte Carlo (GCMC) modeling.
Two isomeric Co(II) complexes with the same general molecular formula of [Co(napy)2(NO3)2] (napy = 1,8-naphthyridine) have been synthesized. X-ray single crystal structural determination demonstrates that the two compounds exhibit highly irregular six- (1) and seven-coordinate (2) geometries, respectively. The magnetic measurements, X-band EPR data and theoretical calculations were thoroughly investigated. Both complexes show field-induced slow magnetic relaxation, of which the slow magnetic relaxation in 2 is attributed to an easy-plane anisotropy.
Due to the similar kinetic diameters of C2H2, C2H4, and C2H6, one-step purification of C2H4 from a ternary C2H2/C2H4/C2H6 mixture by adsorption separation is still a challenge. Based on a C2H6-trapping platform and crystal engineering strategy, the N atom and amino group were introduced into NTUniv-58 and NTUniv-59, respectively. Gas adsorption testing of NTUniv-58 showed that both the C2H2 and C2H4 uptake capacities and the C2H2/C2H4 separation ability were boosted compared with the original platform. However, the C2H4 uptake value exceeds the C2H6 adsorption data. For NTUniv-59, the C2H2 uptake at low pressure increased and the C2H4 uptake decreased; thus, the C2H2/C2H4 selectivity was enhanced and the one-step purification of C2H4 from a ternary C2H2/C2H4/C2H6 mixture was realized, which was supported by the enthalpy of adsorption (Qst) and breakthrough testing. Grand canonical monte carlo (GCMC) simulation indicated that the preference for C2H2 over C2H4 originates from multiple hydrogen-bonding interactions between amino groups and C2H2 molecules.
The biological nitrogen removal of municipal wastewater was successfully improved by integrating anammox in a step-feed sequencing biofilm batch reactor. Despite fluctuating influent carbon to nitrogen ratio (1.9-5.1) and decreasing temperature (24.1-16.3 â), nitrogen removal efficiency of 95.9 ± 1.4 % and nitrogen removal rate of 0.23 ± 0.02 kg N/(m3·d) were successfully maintained without requirement of external carbon sources. The advanced removal performance was mainly attributed to the enhanced anammox. Anammox bacteria presented a high relative abundance (42.9% in biofilms, 1.5% in flocs) and anammox activity was as high as 5.42 ± 0.12 mg N/(g volatile suspended solids·h). Further analysis suggested that flexible control of influent organic and ammonium through step-feeding could provide multiple substrate supply for anammox reaction, potentially resulting in stable combination of anammox with hybrid-nitrite-shunt processes. Overall, this study provides a promising anammox-related application with simple-control step-feed strategy for enhanced and stable nitrogen removal from carbon-limited municipal wastewater.
Ammonium Compounds , Wastewater , Denitrification , Nitrogen/analysis , Carbon , Anaerobic Ammonia Oxidation , Bioreactors/microbiology , Oxidation-Reduction , Biofilms , Sewage/microbiology
A gradual amide truncation strategy was presented to tune the pore chemistry and CO2 capture performance of a series of tetracarboxylate-based Cu-MOFs. These MOFs exhibited a high density of Lewis basic sites (LBSs) and open metal sites and were prepared with the goal to enhance CO2 selective adsorption capacity. [Cu2(L1)(H2O)2]n (NJU-Bai42: NJU-Bai for Nanjing University Bai's group), [Cu2(L2) (H2O)2]n (NJU-Bai17), and [Cu2(L3)(H2O)2]n (NTUniv-60: NTUniv for Nantong University) were synthesized, and we observed that the CO2 adsorption capacities and MOF structures were impacted by subtle changes in ligands. Interestingly, although the NTUniv-60 was decorated with the least LBSs in these three MOFs, its CO2 adsorption capacity reached 270 (53.0 wt %) and 164 (32.2 wt %) cm3 g-1 at 273 and 296 K under 1 bar, respectively, which is the highest data reported for MOFs under similar conditions. From the grand canonical Monte Carlo (GCMC) simulation, the cooperative interactions between the CO2 molecules within the shuttle-shaped cages of NTUniv-60 could potentially explain why the CO2 uptake is high in this material.
Carbon Dioxide , Lewis Bases , Humans , Adsorption , Amides , Biological Transport
A polar flow channel with embedded gas recognition pockets was made in a 10-connected hexanuclear yttrium-based metal-organic frameworks (MOF) NTUniv-57 (NTUniv = Nantong University) by lowering the symmetry of the ligand, which showed high chemical stability and obviously enhanced gas adsorption selectivities.
The choice of axial ligands is of great importance for the construction of high-performance Dy-based single-molecule magnets (SMMs). Here, combining axial ligands Ph3SiO- (anion of triphenylsilanol) and 2,6-dichloro-4-nitro-PhO- (the anion of 2,6-dichloro-4-nitrophenol) with a neutral macrocyclic ligand 2,14-dimethyl-3,6,10,13,19-pentaazabicyclo[13.3.1]nonadeca-1(19),2,13,15,17-pentaene (L2N5) generates two new pentagonal bipyramidal Dy(III) complexes [DyIII(L2N5) (X)2](BPh4) (X = Ph3SiO-, 1; 2,6-dichloro-4-nitro-PhO-, 2) with strong axial ligand fields. Magnetic characterizations show that 1 possesses a large energy barrier above 1000 K and a magnetic hysteresis up to 9 K, whereas 2 only displays field-induced peaks of alternating-current susceptibilities without the hysteresis loop, even though 2 has a similar coordination geometry with 1. Detailed Ab initio calculations indicate an apparent difference in the axial negative charge between both complexes, which is caused by the diverse electron-donating properties of the axial ligands. The present work provides an efficient strategy to enhance the SMMs' properties, which highlights that the electron-donating property of the axial ligands is especially important for constructing the high-performance Dy-based SMMs.
Antifungal Agents , Magnets , Ligands , Electrons , Nitrophenols
The synthesis of air-stable, high-performance single-molecule magnets (SMMs) is of great significance for their practical applications. Indeed, Ln complexes with high coordination numbers are satisfactorily air stable. However, such geometries easily produce spherical ligand fields that minimize magnetic anisotropy. Herein, we report the preparation of three air-stable eight-coordinate mononuclear Dy(iii) complexes with triangular dodecahedral geometries, namely, [Dy(BPA-TPA)Cl](BPh4)2 (1) and [Dy(BPA-TPA)(X)](BPh4)2·nCH2Cl2 (X = CH3O- and n = 1 for 2; L = PhO- and n = 2 for 3), using a novel design concept in which the bulky heptadentate [2,6-bis[bis(2-pyridylmethyl)amino]methyl]-pyridine (BPA-TPA) ligand enwraps the Dy(iii) ion through weak coordinate bonds leaving only a small vacancy for a negatively charged (Cl-), methoxy (CH3O-) or phenoxy (PhO-) moiety to occupy. Magnetic measurements reveal that the single-molecule magnet (SMM) property of complex 1 is actually poor, as there is almost no energy barrier. However, complexes 2 and 3 exhibit fascinating SMM behavior with high energy barriers (U eff = 686 K for 2; 469 K for 3) and magnetic hysteresis temperatures up to 8 K, which is attributed to the pseudolinear ligand field generated by one strong, highly electrostatic Dy-O bond. Ab initio calculations were used to show the apparent difference in the magnetic dynamics of the three complexes, confirming that the pseudo-mono-axial ligand field has an important effect on high-performance SMMs compared with the local symmetry. This study not only presents the highest energy barrier for a triangular dodecahedral SMM but also highlights the enormous potential of the pseudolinear Dy-L ligand field for constructing promising SMMs.
By shortening the previous shortest tetracarboxylate ligand, the first ligand-to-ligand and axial-to-axial pillaring method was realized in the prototype MOF NTUniv-56 (NTUniv = Nantong University), which exhibit a rare (2,4,6)-connected net with a new topology and interesting gas adsorption performance.
Recently, the choice of ligand and geometric control of mononuclear complexes, which can affect the relaxation pathways and blocking temperature, have received wide attention in the field of single-ion magnets (SIMs). To find out the influence of the coordination environment on SIMs, two four-coordinate mononuclear Co(II) complexes [NEt4][Co(PPh3)X3] (X = Cl-, 1; Br-, 2) have been synthesized and studied by X-ray single crystallography, magnetic measurements, high-frequency and -field EPR (HF-EPR) spectroscopy and theoretical calculations. Both complexes are in a cubic space group Pa3Ì (No. 205), containing a slightly distorted tetrahedral moiety with crystallographically imposed C3v symmetry through the [Co(PPh3)X3]- anion. The direct-current (dc) magnetic data and HF-EPR spectroscopy indicated the anisotropic S = 3/2 spin ground states of the Co(II) ions with the easy-plane anisotropy for 1 and 2. Ab initio calculations were performed to confirm the positive magnetic anisotropies of 1 and 2. Frequency- and temperature-dependent alternating-current (ac) magnetic susceptibility measurements revealed slow magnetic relaxation for 1 and 2 at an applied dc field. Finally, the magnetic properties of 1 and 2 were compared to those of other Co(II) complexes with a [CoAB3] moiety.
Two air-stable Co(III)-Co(II) mixed-valence complexes of molecular formulas [CoIICoIII(L)(DMAP)3(CH3COO)]·H2O·CH3OH (1) and [CoIICoIII(L)(4-Pyrrol)3 (CH3COO)]·0.5CH2Cl2 (2) (H4L = 1,3-bis-(5-methyl pyrazole-3-carboxamide) propane; DMAP = 4-dimethylaminopyridine; and 4-Pyrrol = 4-pyrrolidinopyridine) were synthesized and characterized by single-crystal X-ray crystallography, high-field electron paramagnetic resonance (HFEPR) spectroscopy, and magnetic measurements. Both complexes possess one five-coordinated paramagnetic Co(II) ion and one six-coordinated Co(III) ion with octahedral geometry. Direct-current magnetic susceptibility and magnetization measurements show the easy-axis magnetic anisotropy that is also confirmed by low-temperature HFEPR measurements and theoretical calculations. Frequency- and temperature-dependent alternating-current magnetic susceptibility measurements reveal their field-assisted slow magnetic relaxation, which is a characteristic behavior of single-molecule magnets (SMMs), caused by the individual Co(II) ion. The effective energy barrier of complex 1 (49.2 cm-1) is significantly higher than those of the other dinuclear Co(III)-Co(II) SMMs. This work hence presents the first instance of the dinuclear Co(III)-Co(II) single-molecule magnets with a five-coordinated environment around the Co(II) ion.
Taking advantage of the pentaethylene glycol (EO5) and deprotonation of EO5, a family of new structurally hexagonal bipyramidal Dy(III) complexes, [Dy(EO5)(2,6-dichloro-4-nitro-PhO)2](2,6-dichloro-4-nitro-PhO) (1), [Dy(EO5-BPh2)(2,6-dichloro-4-nitro-PhO)2] (2), and [Dy(EO5-BPh2)(2,6-dichloro-4-nitro-PhO)Cl] (3), were controbllably synthesized and structurally characterized. Magnetic measurements show that complex 1 is a zero-field SIM and has an observable hysteresis opening up to 4 K. Conversely, only under extra magnetic field is slow magnetic relaxation observed in 2 and 3. This considerable difference in the magnetic behavior is mainly caused by the change of the equatorial negative charge. Detailed ab initio calculations further elucidate that the quantum tunneling is induced by the presence of equatorial negative charge, and the magnetic anisotropy depends on the axial ligands. This work demonstrates that the absence of the equatorial negative charge should also be considered in the rational design of promising single molecular magnets based on the oblate ions.
By systematic ligand tuning for control of the secondary building units, the use of tridentate carboxylic acid to construct the rod scandium metal-organic framework NTUniv-55 (NTUniv = Nantong University) with high chemical stability and interesting selective gas adsorption was reported.
The metal-organic framework (MOF) NTUniv-54 (NTUniv = Nantong University) was assembled via utilizing click chemistry with densely decorated trizole units and exposed metal sites, which exhibited the best methane working ability (197 cm3·cm-3 from 100 to 5 bar and 177 cm3·cm-3 from 65 to 5 bar at 298 K), and the lowest CO2 Qst of 22.8 kJ·mol-1 in all triazole-MOFs at room temperature.
In this study, an innovative partial nitrification-anammox (PN/A) and endogenous partial denitrification-anammox (EPD/A) process was developed in a single-stage integrated fixed film activated sludge sequencing batch reactor (IFAS-SBR) treating real municipal wastewater with C/N ratio below 3.2. Enhanced efficiency of total nitrogen (TN) removal reached 90.1% with low HRT of 12â¯h and DO of 0.4⯱â¯0.1â¯mg/L. Detailed nitrogen removal mechanism analysis of typical cycle revealed that 89.9% of TN was eliminated through anammox pathway. Anammox bacteria (Candidatus Brocadia) and endogenous denitrifying bacteria (Candidatus Competibacter) were abundant both in biofilms and suspended sludge, meanwhile ammonium-oxidizing bacteria has outcompeted nitrite-oxidizing bacteria, which all favored the synergistic effect of anammox with PN and EPD and contributed to the improvement of nitrogen removal. Overall, the above results confirmed that combined PN/A and EPD/A process is a reliable and efficient alternative for mainstream anammox process.
Nitrification , Wastewater , Bioreactors , Denitrification , Nitrogen , Oxidation-Reduction , Sewage
