RESUMEN
This study surveyed the fates of artificial sweeteners in influent, effluent, and sewage sludge (SS) in wastewater treatment plant, and investigated the effects of Micro-Kaolin (Micro-KL) and Nano-Kaolin (Nano-KL) on nitrogen transformation and sucralose (SUC) and acesulfame (ACE) degradation during SS composting. Results showed the cumulative rate of ACE and SUC in SS was â¼76 %. During SS composting, kaolin reduced NH3 emissions by 30.2-45.38 %, and N2O emissions by 38.4-38.9 %, while the Micro-KL and Nano-KL reduced nitrogen losses by 14.8 % and 12.5 %, respectively. Meanwhile, Micro-KL and Nano-KL increased ACE degradation by 76.8 % and 84.2 %, and SUC degradation by 75.3 % and 77.7 %, and significantly shifted microbial community structure. Furthermore, kaolin caused a positive association between Actinobacteria and sweetener degradation. Taken together, kaolin effectively inhibited nitrogen loss and promoted the degradation of ACE and SUC during the SS composting, which is of great significance for the removal of emerging organic pollutants in SS.
Asunto(s)
Compostaje , Caolín , Aguas del Alcantarillado , Edulcorantes , Caolín/química , Aguas del Alcantarillado/química , Compostaje/métodos , Aguas Residuales/química , Biodegradación Ambiental , Contaminantes Químicos del Agua , Purificación del Agua/métodos , Nitrógeno , Nanopartículas/química , Sacarosa/metabolismo , Sacarosa/análogos & derivadosRESUMEN
Directly electrochemical conversion of nitrate (NO3 -) is an efficient and environmentally friendly technology for ammonia (NH3) production but is challenged by highly selective electrocatalysts. High-entropy alloys (HEAs) with unique properties are attractive materials in catalysis, particularly for multi-step reactions. Herein, we first reported the application of HEA (FeCoNiAlTi) for electrocatalytic NO3 - reduction to NH3 (NRA). The bulk HEA is active for NRA but limited by the unsatisfied NH3 yield of 0.36â mg h-1 cm-2 and Faradaic efficiency (FE) of 82.66 %. Through an effective phase engineering strategy, uniform intermetallic nanoparticles are introduced on the bulk HEA to increase electrochemical active surface area and charge transfer efficiency. The resulting nanostructured HEA (n-HEA) delivers enhanced electrochemical NRA performance in terms of NH3 yield (0.52â mg h-1 cm-2) and FE (95.23 %). Further experimental and theoretical investigations reveal that the multi-active sites (Fe, Co, and Ni) dominated electrocatalysis for NRA over the n-HEA. Notably, the typical Co sites exhibit the lowest energy barrier for NRA with *NH2 to *NH3as the rate-determining step.
RESUMEN
Quinone-based electrodes using carbonyl redox reactions are promising candidates for aqueous energy storage due to their high theoretical specific capacity and high-rate performance. However, the proton storage manners and their influences on the electrochemical performance of quinone are still not clear. Herein, we reveal that proton storage could determine the products of the enol conversion and the electrochemical stability of the organic electrode. Specifically, the protons preferentially coordinated with the prototypical pyrene-4,5,9,10-tetraone (PTO) cathode, and increasing the proton concentration in the electrolyte can improve its working potentials and cycling stability by tailoring the enol conversion reaction. We also found that exploiting Al2(SO4)3 as a pH buffer can increase the energy density of the Zn||PTO batteries from 242.8 to 284.6 Wh kg-1. Our research has a guiding significance for emphasizing proton storage of organic electrodes based on enol conversion reactions and improving their electrochemical performance.
RESUMEN
In order to comprehensively evaluate the effects of vermicomposting on compost quality and the conversion of heavy metals under different control conditions, 109 studies were reviewed. The effects of earthworm species, pre-compost time, ventilation methods, initial C/N, initial pH, and initial moisture of the raw materials on compost quality and the heavy metal toxicity were quantitatively discussed during the vermicomposting process through Meta-analysis. The results showed that the six subgroups of factors all showed obvious influences on the compost quality and heavy metal toxicity. After vermicomposting, the contents of NO3--N (116.2%), TN (29.1%), TP (31.2%), and TK (15.0%) were significantly increased, whereas NH4+-N (-14.8%) and C/N (-36.3%) were significantly decreased. Meanwhile, the total amount of Cu and Cr of the final compost and their bioavailability were significantly reduced. Considering the influences of grouping factors on compost quality and heavy metals, it is recommended to adjust the initial moisture of pile materials to 70%-80%, C/N to 30-85, and pH to 6-7 and to conduct pre-composting for 0-15 d; additionally, vermicomposting should be naturally placed when the composting is aimed at promoting the compost quality. If the main purpose is to weaken the perniciousness of heavy metals in the raw material, it is recommended to adjust the initial moisture of the material to 50%-60%, C/N to less than 30, and pH to 7-8; to conduct no pre-compost; regularly turn the piles; and use the earthworm Eudrilus eugeniae for vermicomposting.
Asunto(s)
Compostaje , Metales Pesados , Oligoquetos , Animales , Suelo/química , Aguas del Alcantarillado/química , Metales Pesados/análisisRESUMEN
The rechargeable aqueous Zn||MnO2 chemistry has been extensively explored, but its electrochemical reaction mechanisms, especially in the context of MnO2/Mn2+ conversion and Zn2+/H+ intercalation chemistry, remain not fully understood. Here, we designed an amphiphilic hydrogel electrolyte, which distinguished the MnO2/Mn2+ conversion, Zn2+ intercalation, and H+ intercalation and conversion processes at three distinct discharge plateaus of an aqueous Zn||MnO2 battery. The amphiphilic hydrogel electrolyte is featured with an extended electrochemical stability window up to 3.0â V, high ionic conductivity, Zn2+-selective ion tunnels, and hydrophobic associations with cathode materials. This specifically designed electrolyte allows the MnO2/Mn2+ conversion reaction at a discharge plateau of 1.75â V. More interesting, the discharge plateaus of ~1.33â V, previously assigned as the co-intercalation of Zn2+ and H+ ions in the MnO2 cathode, are specified as the exclusive intercalation of Zn2+ ions, leading to an ultra-flat voltage plateau. Furthermore, with a distinct three-step electrochemical energy storage process, a high areal capacity of 1.8â mAh cm-2 and high specific energy of 0.858â Wh cm-2, even at a low MnO2 loading mass of 0.5â mg cm-2 are achieved. To our knowledge, this is the first report to fully distinguish different mechanisms at different potentials in aqueous Zn||MnO2 batteries.
RESUMEN
As the need for sustainable battery chemistry grows, non-metallic ammonium ion (NH4 + ) batteries are receiving considerable attention because of their unique properties, such as low cost, nontoxicity, and environmental sustainability. In this study, the solvation interactions between NH4 + and solvents are elucidated and design principles for NH4 + weakly solvated electrolytes are proposed. Given that hydrogen bond interactions dominate the solvation of NH4 + and solvents, the strength of the solvent's electrostatic potential directly determines the strength of its solvating power. As a proof of concept, succinonitrile with relatively weak electronegativity is selected to construct a metal-free eutectic electrolyte (MEE). As expected, this MEE is able to significantly broaden the electrochemical stability window and reduce the solvent binding energy in the solvation shell, which leads to a lower desolvation energy barrier and a fast charge transfer process. As a result, the as-constructed NH4 -ion batteries exhibit superior reversible rate capability (energy density of 65 Wh kg-1 total active mass at 600 W kg-1 ) and unprecedent long-term cycling performance (retention of 90.2% after 1000 cycles at 1.0 A g-1 ). The proposed methodology for constructing weakly hydrogen bonded electrolytes will provide guidelines for implementing high-rate and ultra-stable NH4 + -based energy storage systems.
RESUMEN
High iodine loading and high-temperature adaptability of the iodine cathode are prerequisites to achieving high energy density at full battery level and promoting the practical application for the zinc-iodine (Zn-I2 ) battery. However, it would aggravate the polyiodide shuttle effect when employing high iodine loading and working temperature. Here, a sustainable cationic cellulose nanofiber (cCNF) was employed to confine the active iodine species through strong physiochemical adsorption to enlarge the iodine loading and stabilize it even at high temperatures. The cCNF could accommodate dual-functionality by enlarging the iodine loading and suppressing the polyiodide shuttle effect, owing to the unique framework structure with abundant surface positive charges. As a result, the iodine cathode based on the cCNF could deliver high iodine mass loading of 14.1â mg cm-2 with a specific capacity of 182.7â mAh g-1 , high areal capacity of 2.6â mAh cm-2 , and stable cycling over 3000 cycles at 2â A g-1 , thus enabling a high energy density of 34.8â Wh kg-1 and the maximum power density of 521.2â W kg-1 at a full Zn-I2 battery level. In addition, even at a high temperature of 60 °C, the Zn-I2 battery could still deliver a stable cycling.
RESUMEN
Most current research is devoted to electrochemical nitrate reduction reaction for ammonia synthesis under alkaline/neutral media while the investigation of nitrate reduction under acidic conditions is rarely reported. In this work, we demonstrate the potential of TiO2 nanosheet with intrinsically poor hydrogen-evolution activity for selective and rapid nitrate reduction to ammonia under acidic conditions. Hybridized with iron phthalocyanine, the resulting catalyst displays remarkably improved efficiency toward ammonia formation owing to the enhanced nitrate adsorption, suppressed hydrogen evolution and lowered energy barrier for the rate-determining step. Then, an alkaline-acid hybrid Zn-nitrate battery was developed with high open-circuit voltage of 1.99 V and power density of 91.4 mW cm-2. Further, the environmental sulfur recovery can be powered by above hybrid battery and the hydrazine-nitrate fuel cell can be developed for simultaneously hydrazine/nitrate conversion and electricity generation. This work demonstrates the attractive potential of acidic nitrate reduction for ammonia electrosynthesis and broadens the field of energy conversion.
RESUMEN
Among the promising batteries for electric vehicles, rechargeable Li-air (O2) batteries (LABs) have risen keen interest due to their high energy density. However, safety issues of conventional nonaqueous electrolytes remain the bottleneck of practical implementation of LABs. Solid-state electrolytes (SSEs) with non-flammable and eco-friendly properties are expected to alleviate their safety concerns, which have become a research focus in the research field of LABs. Herein, we present a systematic review on the progress of SSEs for rechargeable LABs, mainly focusing on the interfacial issues existing between the SSEs and electrodes. The discussion highlights the challenges and feasible strategies for designing suitable SSEs for LABs.
RESUMEN
Uncontrollable dendrite formation in the Zn anode is the bottleneck of the commercialization of rechargeable aqueous zinc-based batteries (RAZBs). Interface, the location of the charge transfer process occuring, can significantly affect the further morphology evolution in ways that have not yet been fully comprehended, for example, the crystal facet and orientation of the coating layer. In this study, we demonstrated that the morphology and kinetics of the Zn anode could be tuned by the crystal facet. The fabricated textured ZnSe (T-ZnSe) layer can significantly enhance the reaction kinetics and induce uniform (0002)Zn deposition. In stark contrast, the polycrystalline P-ZnSe coating hinders the charge transfer process at the interface. With this T-ZnSe@Zn as the anode, the full cell with an I2 cathode and a practical areal capacity (2 mAh cm-2) can work well for 900 cycles. The effectiveness of this anode has also been testified by a pouch cell with an overall capacity of 150 mAh. This research contributes to the understanding of the interface and the feasible strategy for the practical application of the Zn anode.
RESUMEN
PURPOSE: To determine whether the morphological parameters of prostate zones and tumors on magnetic resonance imaging (MRI) can predict the tumor-stage (T-stage) of prostate cancer (PCa) and establish an optimal T-stage diagnosis protocol based on three-dimensional reconstruction and quantization after image segmentation. METHODS: A dataset of the prostate MRI scans and clinical data of 175 patients who underwent biopsy and had pathologically proven PCa from January 2018 to November 2020 was retrospectively analyzed. The authors manually segmented and measured the volume, major axis, and cross-sectional area of the peripheral zone (PZ), transition zone, central zone (CZ), anterior fibromuscular stroma, and tumor. The differences were evaluated by the One-Way analysis of variance, Pearson's chi-squared test, or independent samples t-test. Spearman's correlation coefficient and receiver operating characteristic curve analyses were also performed. The cut-off values of the T-stage diagnosis were generated using Youden's J index. RESULTS: The prostate volume (PV), PZ volume (PZV), CZ volume, tumor's major axis (TA), tumor volume (TV), and volume ratio of the TV and PV were significantly different among stages T1 to T4. The cut-off values of the PV, PZV, CZV, TA, TV, and the ratio of TV/PV for the discrimination of the T1 and T2 stages were 53.63 cm3, 11.60 cm3, 1.97 cm3, 2.30 mm, 0.90 cm3, and 0.03 [area under the curves (AUCs): 0.628, 0.658, 0.610, 0.689, 0.724, and 0.764], respectively. The cut-off values of the TA, TV, and the ratio of TV/PV for the discrimination of the T2 and T3 stages were 2.80 mm, 8.29 cm3, and 0.12 (AUCs: 0.769, 0.702, and 0.688), respectively. The cut-off values of the TA, TV, and the ratio of TV/PV for the discrimination of the T3 and T4 stages were 4.17 mm, 18.71 cm3, and 0.22 (AUCs: 0.674, 0.709, and 0.729), respectively. CONCLUSION: The morphological parameters of the prostate zones and tumors on the MRIs are simple and valuable diagnostic factors for predicting the T-stage of patients with PCa, which can help make accurate diagnoses and lateral treatment decisions.
Asunto(s)
Próstata , Neoplasias de la Próstata , Masculino , Humanos , Próstata/diagnóstico por imagen , Próstata/patología , Estudios Retrospectivos , Neoplasias de la Próstata/patología , Imagen por Resonancia Magnética/métodos , Curva ROCRESUMEN
Metal-organic framework-based materials are promising single-site catalysts for electrocatalytic nitrate (NO3 - ) reduction to value-added ammonia (NH3 ) on account of well-defined structures and functional tunability but still lack a molecular-level understanding for designing the high-efficient catalysts. Here, we proposed a molecular engineering strategy to enhance electrochemical NO3 - -to-NH3 conversion by introducing the carbonyl groups into 1,2,4,5-tetraaminobenzene (BTA) based metal-organic polymer to precisely modulate the electronic state of metal centers. Due to the electron-withdrawing properties of the carbonyl group, metal centers can be converted to an electron-deficient state, fascinating the NO3 - adsorption and promoting continuous hydrogenation reactions to produce NH3 . Compared to CuBTA with a low NO3 - -to-NH3 conversion efficiency of 85.1 %, quinone group functionalization endows the resulting copper tetraminobenzoquinone (CuTABQ) distinguished performance with a much higher NH3 FE of 97.7 %. This molecular engineering strategy is also universal, as verified by the improved NO3 - -to-NH3 conversion performance on different metal centers, including Co and Ni. Furthermore, the assembled rechargeable Zn-NO3 - battery based on CuTABQ cathode can deliver a high power density of 12.3â mW cm-2 . This work provides advanced insights into the rational design of metal complex catalysts through the molecular-level regulation for NO3 - electroreduction to value-added NH3 .
RESUMEN
New pollutants, pharmaceuticals and personal care products (PPCPs), accumulate in sewage sludge (SS) in wastewater treatment plants (WWTPs), posing risks to the environment and to human health. In the present study, the fates of typical PPCPs, carbamazepine (CBZ), triclosan (TCS), ibuprofen (IBU) and galaxolide (HHCB), were examined during WW treatment. Additionally, SS collected from a WWTP was used for aerobic composting to investigate the influences of micron-sized Fe3O4 (M-Fe) and nano-sized Fe3O4 (N-Fe) on the degradation of these PPCPs and the succession of microbial communities during the composting process. The results showed that the mean concentrations of CBZ, TCS, IBU and HHCB in the influent of the WWTP were 926.5, 174.4, 8869, and 967.3 ng/g, respectively, and in the effluent were 107.6, 47.0, 283.4, and 88.4 ng/g, respectively. The removal rate averaged â¼80%, while the enrichment rates of the PPCPs in SS ranged from 37.2% to 60.5%. M-Fe and N-Fe reduced NH3 emissions by 32.9% and 54.1% and N2O emissions by 26.2% and 50.8%, respectively. Moreover, the addition of M-Fe and N-Fe effectively increased PPCP degradation rates 1.12-1.66-fold. During the whole process, the additions of M-Fe and N-Fe significantly shifted microbial community structure, and the abundances of Proteobacteria, Chloroflexi, and Actinobacteria were increased during the thermophilic stage, marking them as key PPCP-degrading phyla. Taken together, our results indicated that the addition of M-Fe and N-Fe is an effective method for improving the quality of end compost and accelerating the degradation of PPCPs.
RESUMEN
The development of flexible lithium-ion batteries (LIBs) imposes demands on energy density and high mechanical durability simultaneously. Due to the limited deformability of electrodes, as well as the flat and smooth surface of the metal current collectors, stable/durable/reliable contact between electrode materials and the current collectors remains a challenge, in particular, for electrodes with high loading mass and heavily deformed batteries. Binders play an essential role in binding particles of electrode materials and adhering them to current collectors. Herein, inspired by spider silk, a binder for flexible LIBs is developed, which equips a cross-linked supramolecular poly(urethane-urea) to the polyacrylic acid. The binder imparts super high elastic restorability originating from the meticulously engineered hydrogen-bonding segments as well as extraordinary adhesion. The developed binder provides excellent flexibility and intact electrode morphologies without disintegration even when the electrode is largely deformed, enabling a stable cycling and voltage output even when the batteries are put under tough dynamic deformation tests. The flexible LIBs exhibit a high energy density of 420 Wh L-1 , which is remarkably higher than reported numbers. The unique binder design is greatly promising and offers a valuable material solution for LIBs with high-loading mass and flexible designs.
RESUMEN
Metal hexacyanoferrates are recognized as superior cathode materials for zinc and zinc hybrid batteries, particularly the Prussian blue analog (PBA). However, PBA development is hindered by several limitations, including small capacities (<70 mAh g-1 ) and short lifespans (<1000 cycles). These limitations generally arise due to incomplete activation of redox sites and structure collapse during intercalation/deintercalation of metal ions in PBAs. According to this study, the adoption of a hydroxyl-rich (OH-rich) hydrogel electrolyte with extended electrochemical stability windows (ESWs) can effectively activate the redox site of low-spin Fe of the Kx Fey Mn1-y [Fe(CN)6 ]w ·zH2 O (KFeMnHCF) cathode while tuning its structure. Additionally, the strong adhesion of the hydrogel electrolyte inhibits KFeMnHCF particles from falling off the cathode and dissolving. The easy desolvation of metal ions in the developed OH-rich hydrogel electrolytes can lead to a fast and reversible intercalation/deintercalation of metal ions in the PBA cathode. As a result, the Zn||KFeMnHCF hybrid batteries achieve the unprecedented characteristics of 14 500 cycles, a 1.7 V discharge plateau, and a 100 mAh g-1 discharge capacity. The results of this study provide a new understanding of the development of zinc hybrid batteries with PBA cathode materials and present a promising new electrolyte material for this application.
RESUMEN
OBJECTIVES: To statistically study the 3D shape of oesophageal cancer (EC) and its spatial relationships based on computed tomography angiography (CTA) 3D reconstruction, to determine its relationship with T-stages, and to create an optimal T-stage diagnosis protocol based on CTA calculation. METHODS: Pre-operative CTA images of 155 patients with EC were retrospectively collected and divided into four groups: T1-T4. We used Amira software to segment and 3D reconstruct the EC, oesophagus, aorta, pericardium and peripheral lymph nodes and measured their surface area, volume, major axis, minor axis, longitudinal length, roughness and relationship to the aorta of the EC. One-way ANOVA, independent sample t-test, ROC, etc., were performed and critical values between different T-stages were calculated. We also invited two radiologists to evaluate the measurements. RESULTS: There were no significant differences in EC longitudinal length, roughness score and relationship with the aorta between the different T-stages of EC. There were significant differences in EC surface area, EC volume and mean major and minor axis among the different T-stages. The volumes of the T1-T4 tumours were 12,934.36 ± 7739.25, 23,095.27 ± 14,975.67, 37,577.98 ± 36,085.64 and 58,579.25 ± 41,073.96 mm3 separately (p < 0.05), and the T1-T4 volume cut-off values were 11,712.00, 19,809.00 and 44,103.50 mm3 separately. For comparison with radiologists, the AUC value of our measurements was 0.704, which was higher than the radiologists of AUC = 0.630. CONCLUSIONS: EC volume, major and minor axis can be used as important factors for surgeons in the T-stage diagnosis of EC, which helps to improve prognosis and treatment decisions after CTA.
Asunto(s)
Angiografía por Tomografía Computarizada , Neoplasias Esofágicas , Humanos , Carga Tumoral , Estudios Retrospectivos , Tomografía Computarizada por Rayos X/métodos , Neoplasias Esofágicas/diagnóstico por imagen , Neoplasias Esofágicas/cirugíaRESUMEN
Electrolyte environments, including cations, anions, and solvents are critical for the performance delivery of cathodes of batteries. Most works focused on interactions between cations and cathode materials, in contrast, there is a lack of in-depth research on the correlation between anions and cathodes. Here, we systematically investigated how anions manipulate the coulombic efficiency (CE) of cathodes of zinc batteries. We take intercalation-type V2 O5 and conversion-type I2 cathodes as typical cases for profound studies. It was found that electronic properties of anions, including charge density and its distribution, can tune conversion or intercalation reactions, leading to significant CE differences. Using operando visual Raman microscopy and theoretical simulations, we confirm that competitive coordination between anions and I- can regulate CEs by modulating polyiodide diffusion rates in Zn-I2 cells. In Zn-V2 O5 cells, anion-tuned solvation structures vastly affect CEs through varying Zn2+ intercalation kinetics. Conversion I2 cathode achieves a 99 % CE with highly electron-donating anions, while anions with preferable charge structures that interact strongly with Zn2+ afford an intercalation V2 O5 a nearly 100 % CE. Understanding the mechanism of anion-governed CEs will help us evaluate compatibility of electrolytes with electrodes, thus providing a guideline for anion selection and electrolyte design for high-energy, long-cycling zinc batteries.
RESUMEN
Aqueous rechargeable batteries are prospective candidates for large-scale grid energy storage. However, traditional anode materials applied lack acid-alkali co-tolerance. Herein, we report a covalent organic framework containing pyrazine (C=N) and phenylimino (-NH-) groups (HPP-COF) as a long-cycle and high-rate anode for both acidic and alkaline batteries. The HPP-COF's robust covalent linkage and the hydrogen bond network between -NH- and water molecules collectively improve the acid-alkaline co-tolerance. More importantly, the hydrogen bond network promotes the rapid transport of H+ /OH- by the Grotthuss mechanism. As a result, the HPP-COF delivers a superior capacity and cycle stability (66.6â mAh g-1 @ 30â A g-1 , over 40000 cycles in 1â M H2 SO4 electrolyte; 91.7â mAh g-1 @ 100â A g-1 , over 30000 cycles @ 30â A g-1 in 1â M NaOH electrolyte). The work opens a new direction for the structural design and application of COF materials in acidic and alkaline batteries.
RESUMEN
Zn-based solid polymer electrolytes (SPEs) have enormous potential in realizing high-performance zinc-ion batteries. Polymeric single-ion conductor (PSIC)-based SPEs can largely eradicate anion migration and side reactions of electrodes with decreased polarization, but the ionic conductivity is still unsatisfactory due to the tight localized ion interactions and sluggish chain motion. Herein, by employing the heterocyclic tetrazole as the anionic center of the side chain, a novel PSIC is fabricated with optimized charge delocalization and enhanced side-chain motion. The as-prepared PSIC delivers an ionic conductivity up to 5.4 × 10-4 S cm-1 with an ultrahigh Zn2+ transference number of 0.94. Based on the PSIC, dendrite-free and hydrogen-free Zn plating/stripping cycling (2000 h) is achieved. A further assembled ZnâV2 O5 battery exhibits superior performances to other solid ZIBs, including a high discharge capacity, excellent rate capability, and long cycling life. In addition, a remarkable shelf-life (90 d), low self-discharge rate, and good temperature adaptability of the solid battery can be achieved benefiting from the high stability of the SPE during operation. The PSIC-based SPEs with advanced ion-transport structure endow solid ZIBs with significant performance improvement, high safety, and durability.
RESUMEN
Aqueous batteries that use metal anodes exhibit maximum anodic capacity, whereas the energy density is still unsatisfactory partially due to the high redox potential of the metal anode. Current metal anodes are plagued by the dilemma that the redox potential of Zn is not low enough, whereas Al, Mg, and others with excessively low redox potential cannot work properly in aqueous electrolytes. Mn metal with a suitably low redox potential is a promising candidate, which was rarely explored before. Here, we report a rechargeable aqueous Mn-metal battery enabled by a well-designed electrolyte and robust inorganic-organic interfaces. The inorganic Sn-based interface with a bottom-up microstructure was constructed to preliminarily suppress water decomposition. With this bubble-free interface, the organic interface can be formed via an esterification reaction of sucrose triggered by acyl chloride in the electrolyte, generating a dense physical shield that isolates water while permitting Mn2+ diffusion. Hence, a Mn symmetric cell achieves a superior plating/stripping stability for 200â hours, and a Mn||V2 O5 battery maintains approximately 100 % capacity after 200â cycles. Moreover, the Mn||V2 O5 battery realizes a much higher output voltage than that of the Zn||V2 O5 battery, evidencing the possibility of increasing the energy density through using a Mn anode. This work develops a systematic strategy to stabilize a Mn-metal anode for Mn-metal batteries, opening a new door towards enhanced voltage of aqueous batteries.