RESUMEN
Method development in comprehensive two-dimensional liquid chromatography (LC×LC) is a challenging process. The interdependencies between the two dimensions and the possibility of incorporating complex gradient profiles, such as multi-segmented gradients or shifting gradients, make trial-and-error method development time-consuming and highly dependent on user experience. Retention modeling and Bayesian optimization (BO) have been proposed as solutions to mitigate these issues. However, both approaches have their strengths and weaknesses. On the one hand, retention modeling, which approximates true retention behavior, depends on effective peak tracking and accurate retention time and width predictions, which are increasingly challenging for complex samples and advanced gradient assemblies. On the other hand, Bayesian optimization may require many experiments when dealing with many adjustable parameters, as in LC×LC. Therefore, in this work, we investigate the use of multi-task Bayesian optimization (MTBO), a method that can combine information from both retention modeling and experimental measurements. The algorithm was first tested and compared with BO using a synthetic retention modeling test case, where it was shown that MTBO finds better optima with fewer method-development iterations than conventional BO. Next, the algorithm was tested on the optimization of a method for a pesticide sample and we found that the algorithm was able to improve upon the initial scanning experiments. Multi-task Bayesian optimization is a promising technique in situations where modeling retention is challenging, and the high number of adjustable parameters and/or limited optimization budget makes traditional Bayesian optimization impractical.
Asunto(s)
Algoritmos , Teorema de Bayes , Cromatografía Liquida/métodos , Plaguicidas/aislamiento & purificación , Plaguicidas/análisisRESUMEN
Hydroxypropyl methyl cellulose (HPMC) is a type of cellulose derivative with properties that render it useful in e.g. food, cosmetics, and pharmaceutical industry. The substitution degree and composition of the ß-glucose subunits of HPMC affect its physical and functional properties, but HPMC characterization is challenging due to its high structural heterogeneity, including many isomers. In this study, comprehensive two-dimensional liquid chromatography-mass spectrometry was used to examine substituted glucose monomers originating from complete acid hydrolysis of HPMC. Resolution between the different monomers was achieved using a C18 and cyano column in the first and second LC dimension, respectively. The data analysis process was structured to obtain fingerprints of the monomers of interest. The results revealed that isomers of the respective monomers could be selectively separated based on the position of substituents. The examination of two industrial HPMC products revealed differences in overall monomer composition. While both products contained monomers with a similar degree of substitution, they exhibited distinct regioselectivity.
Asunto(s)
Derivados de la Hipromelosa , Glucosa/química , Glucosa/análisis , Hidrólisis , Derivados de la Hipromelosa/química , Isomerismo , Cromatografía Líquida con Espectrometría de MasasRESUMEN
Method development in comprehensive two-dimensional liquid chromatography (LC × LC) is a complicated endeavor. The dependency between the two dimensions and the possibility of incorporating complex gradient profiles, such as multi-segmented gradients or shifting gradients, renders method development by "trial-and-error" time-consuming and highly dependent on user experience. In this work, an open-source algorithm for the automated and interpretive method development of complex gradients in LC × LC-mass spectrometry (MS) was developed. A workflow was designed to operate within a closed-loop that allowed direct interaction between the LC × LC-MS system and a data-processing computer which ran in an unsupervised and automated fashion. Obtaining accurate retention models in LC × LC is difficult due to the challenges associated with the exact determination of retention times, curve fitting because of the use of gradient elution, and gradient deformation. Thus, retention models were compared in terms of repeatability of determination. Additionally, the design of shifting gradients in the second dimension and the prediction of peak widths were investigated. The algorithm was tested on separations of a tryptic digest of a monoclonal antibody using an objective function that included the sum of resolutions and analysis time as quality descriptors. The algorithm was able to improve the separation relative to a generic starting method using these complex gradient profiles after only four method-development iterations (i.e., sets of chromatographic conditions). Further iterations improved retention time and peak width predictions and thus the accuracy in the separations predicted by the algorithm.
Asunto(s)
Algoritmos , Anticuerpos Monoclonales , Computadores , Espectrometría de Masas , Cromatografía LiquidaRESUMEN
Efforts to model and simulate various aspects of liquid chromatography (LC) separations (e.g., retention, selectivity, peak capacity, injection breakthrough) depend on experimental retention measurements to use as the basis for the models and simulations. Often these modeling and simulation efforts are limited by datasets that are too small because of the cost (time and money) associated with making the measurements. Other groups have demonstrated improvements in throughput of LC separations by focusing on "overhead" associated with the instrument itself - for example, between-analysis software processing time, and autosampler motions. In this paper we explore the possibility of using columns with small volumes (i.e., 5 mm x 2.1 mm i.d.) compared to conventional columns (e.g., 100 mm x 2.1 mm i.d.) that are typically used for retention measurements. We find that isocratic retention factors calculated for columns with these dimensions are different by about 20%; we attribute this difference - which we interpret as an error in measurements based on data from the 5 mm column - to extra-column volume associated with inlet and outlet frits. Since retention factor is a thermodynamic property of the mobile/stationary phase system under study, it should be independent of the dimensions of the column that is used for the measurement. We propose using ratios of retention factors (i.e., selectivities) to translate retention measurements between columns of different dimensions, so that measurements made using small columns can be used to make predictions for separations that involve conventional columns. We find that this approach reduces the difference in retention factors (5 mm compared to 100 mm columns) from an average of 18% to an average absolute difference of 1.7% (all errors less than 8%). This approach will significantly increase the rate at which high quality retention data can be collected to thousands of measurements per instrument per day, which in turn will likely have a profound impact on the quality of models and simulations that can be developed for many aspects of LC separations.
Asunto(s)
Programas Informáticos , Cromatografía Líquida de Alta Presión/métodos , Cromatografía Liquida/métodos , Simulación por Computador , Indicadores y ReactivosRESUMEN
A peak-tracking algorithm was developed for use in comprehensive two-dimensional liquid chromatography coupled to mass spectrometry. Chromatographic peaks were tracked across two different chromatograms, utilizing the available spectral information, the statistical moments of the peaks and the relative retention times in both dimensions. The algorithm consists of three branches. In the pre-processing branch, system peaks are removed based on mass spectra compared to low intensity regions and search windows are applied, relative to the retention times in each dimension, to reduce the required computational power by elimination unlikely pairs. In the comparison branch, similarity between the spectral information and statistical moments of peaks within the search windows is calculated. Lastly, in the evaluation branch extracted-ion-current chromatograms are utilized to assess the validity of the pairing results. The algorithm was applied to peptide retention data recorded under varying chromatographic conditions for use in retention modelling as part of method optimization tools. Moreover, the algorithm was applied to complex peptide mixtures obtained from enzymatic digestion of monoclonal antibodies. The algorithm yielded no false positives. However, due to limitations in the peak-detection algorithm, cross-pairing within the same peaks occurred and six trace compounds remained falsely unpaired.
Asunto(s)
Algoritmos , Anticuerpos Monoclonales/análisis , Cromatografía Liquida/métodos , Péptidos/análisis , Espectrometría de Masas/métodos , Reconocimiento de Normas Patrones Automatizadas , Estándares de ReferenciaRESUMEN
The hydrophobic subtraction model (HSM) for characterizing the selectivity of reversed-phase liquid chromatography (LC) columns has been used extensively by the LC community since it was first developed in 2002. Continuing interest in the model is due in part to the large, publicly available set of column descriptors that has been assembled over the past 18 years. In the work described in this report, we sought to refine the HSM with the goal of improving the predictive accuracy of the model without compromising its physico-chemical interpretability. The approach taken here has the following facets. A set of retention measurements for 635 columns and the 16 probe solutes used to characterize new columns using the HSM was assembled. Principal components analysis (PCA) was used as a guide for the development of a refined version of the HSM. Several outlying columns (84) were eliminated from the analysis because they were either inconsistent with the PCA model or were outliers from the original HSM model. With the retention dataset for the 16 probe solutes on the remaining 551 columns, we determined that a six-component model is the most sophisticated form of the model that can be used without overfitting the data. In our refined version of the HSM, the S*σ term has been removed. Two new terms have been added, which more accurately account for the molecular volume of the solute (Vv), and the solute dipolarity (Dd), and the remaining terms have been adjusted to accommodate these changes. The refined model described here provides improved prediction of retention factors, with the model standard error being reduced from 1.0 for the original HSM to 0.35 for the refined model (16 solutes, 551 columns). Furthermore, the number of retention factors with errors greater than 10% are reduced from 231 to 25. A revised metric for column similarity, F, is also proposed as a part of this work.