Limitations in electrochemical performance as well as supply chain challenges have rendered positive electrode materials a critical bottleneck for Li-ion batteries. State-of-the-art Li-ion batteries fall short of accessing theoretical capacities. As such, there is intense interest in the design of strategies that enable the more effective utilization of active intercalation materials. Pre-intercalation with alkali-metal ions has attracted interest as a means of accessing higher reversible capacity and improved rate performance. However, the structural basis for improvements in electrochemical performance remains mostly unexplored. Here we use topochemical single-crystal-to-single-crystal transformations in a tunnel-structured ζ-V2O5 positive electrode to illustrate the effect of pre-intercalation in modifying the host lattice and altering diffusion pathways. Furthermore, operando synchrotron X-ray diffraction is used to map Li-ion site preferences and occupancies as a function of the depth of discharge in pre-intercalated materials. Na- and K-ion intercalation 'props open' the one-dimensional tunnel, reduces electrostatic repulsions between inserted Li ions and entirely modifies diffusion pathways, enabling orders of magnitude higher Li-ion diffusivities and accessing higher capacities. Deciphering the atomistic origins of improved performance in pre-intercalated materials on the basis of single-crystal-to-single-crystal topochemical transformation and operando diffraction studies paves the way to site-selective modification approaches for positive electrode design.
Despite impressive demonstrations of memristive behavior with halide perovskites, no clear pathway for material and device design exists for their applications in neuromorphic computing. Present approaches are limited to single element structures, fall behind in terms of switching reliability and scalability, and fail to map out the analog programming window of such devices. Here, we systematically design and evaluate robust pyridinium-templated one-dimensional halide perovskites as crossbar memristive materials for artificial neural networks. We compare two halide perovskite 1D inorganic lattices, namely (propyl)pyridinium and (benzyl)pyridinium lead iodide. The absence of conjugated, electron-rich substituents in PrPyr+ prevents edge-to-face type π-stacking, leading to enhanced electronic isolation of the 1D iodoplumbate chains in (PrPyr)[PbI3], and hence, superior resistive switching performance compared to (BnzPyr)[PbI3]. We report outstanding resistive switching behaviours in (PrPyr)[PbI3] on the largest flexible crossbar implementation (16 × 16) to date - on/off ratio (>105), long term retention (105 s) and high endurance (2000 cycles). Finally, we put forth a universal approach to comprehensively map the analog programming window of halide perovskite memristive devices - a critical prerequisite for weighted synaptic connections in artificial neural networks. This consequently facilitates the demonstration of accurate handwritten digit recognition from the MNIST database based on spike-timing-dependent plasticity of halide perovskite memristive synapses.
Halide exchange is a popular strategy to tune the properties of CsPbX3 nanocrystals after synthesis. However, while Cl â Br and Br â I exchanges proceed through the formation of stable mixed-halide nanocrystals, the Cl â I exchange is more elusive. Indeed, the large size difference between chloride and iodide ions causes a miscibility gap in the CsPbCl3-CsPbI3 system, preventing the isolation of stable CsPb(ClxI1-x)3 nanocrystals. Yet, previous works have claimed that a full CsPbCl3 â CsPbI3 exchange can be achieved. Even more interestingly, interrupting the exchange prematurely yields a mixture of CsPbCl3 and CsPbI3 nanocrystals that coexist without undergoing further transformation. Here, we investigate the reaction mechanism of CsPbCl3 â CsPbI3 exchange in nanocrystals. We show that the reaction proceeds through the early formation of iodide-doped CsPbCl3 nanocrystals covered by a monolayer shell of CsI. These nanocrystals then leap over the miscibility gap between CsPbCl3 and CsPbI3 by briefly transitioning to short-lived and nonrecoverable CsPb(ClxI1-x)3 nanocrystals, which quickly expel the excess chloride and turn into the chloride-doped CsPbI3 nanocrystals found in the final product.
A highly active and stable Cu-based catalyst for CO2 to CO conversion was demonstrated by creating a strong metal-support interaction (SMSI) between Cu active sites and the TiO2-coated dendritic fibrous nano-silica (DFNS/TiO2) support. The DFNS/TiO2-Cu10 catalyst showed excellent catalytic performance with a CO productivity of 5350 mmol g-1 h-1 (i.e., 53,506 mmol gCu-1 h-1), surpassing that of almost all copper-based thermal catalysts, with 99.8% selectivity toward CO. Even after 200 h of reaction, the catalyst remained active. Moderate initial agglomeration and high dispersion of nanoparticles (NPs) due to SMSI made the catalysts stable. Electron energy loss spectroscopy confirmed the strong interactions between copper NPs and the TiO2 surface, supported by in situ diffuse reflectance infrared Fourier transform spectroscopy and X-ray photoelectron spectroscopy. The H2-temperature programmed reduction (TPR) study showed α, ß, and γ H2-TPR signals, further confirming the presence of SMSI between Cu and TiO2. In situ Raman and UV-vis diffuse reflectance spectroscopy studies provided insights into the role of oxygen vacancies and Ti3+ centers, which were produced by hydrogen, then consumed by CO2, and then again regenerated by hydrogen. These continuous defect generation-regeneration processes during the progress of the reaction allowed long-term high catalytic activity and stability. The in situ studies and oxygen storage complete capacity indicated the key role of oxygen vacancies during catalysis. The in situ time-resolved Fourier transform infrared study provided an understanding of the formation of various reaction intermediates and their conversion to products with reaction time. Based on these observations, we have proposed a CO2 reduction mechanism, which follows a redox pathway assisted by hydrogen.
Hybrid lead halide perovskites and their derivatives are important optoelectronic materials but suffer from water instability. Combining both the optoelectronics and the water stability of such systems is a major challenge in material design today. To address this issue, we employ the well-known π-conjugation and cation-π interaction concepts in designing a hybrid lead halide perovskite derivative system. (4,4'-VDP)Pb2Br6 (VDP = vinylenedipyridinium) single crystals are prepared. They have a one-dimensional (1D) arrangement of inorganic Pb-Br sublattices connected via the 4,4'-VDP organic sublattice. The π-conjugation in the 4,4'-VDP sublattice allows electronic communication between the 1D Pb-Br units, reducing the band gap and improving the photoconductivity. Importantly, N+ of one 4,4'-VDP molecular ion interacts with the π-electron cloud of the adjacent one. This intermolecular cation-π interaction extends throughout the organic sublattice, making the hybrid crystal stable when stored under water for more than a year without requiring any encapsulations.
Since the inception of the unprecedented rise of halide perovskites for photovoltaic research, ion migration has shadowed this material class with undesirable hysteresis and degradation effects, limiting its practical implementations. Unfortunately, the localized doping and electrochemical reactions triggered by ion migration cause many more undesirable effects that are often unreported or misinterpreted because they deviate from classical semiconductor behavior. In this Perspective, we provide a concise overview of such effects in halide perovskites, such as operational instability in photovoltaics, polarization-induced abnormal external quantum efficiency in light-emitting diodes, and energy channel shift and anomalous sensitivities in hard radiation detection. Finally, we highlight a unique use case of exploiting ion migration as a boon to design emerging memory technologies such as memristors for information storage and computing.
Mineral exploration forms a key approach for unveiling functional battery electrode materials. The synthetic preparation of naturally found minerals and their derivatives can aid in designing of new electrodes. Herein, saranchinaite Na2Cu(SO4)2 and its hydrated derivative kröhnkite Na2Cu(SO4)2·2H2O bisulfate minerals have been prepared using a facile spray drying route for the first time. The phase stability relation during the (de)hydration process was examined synergising in situ X-ray diffraction and thermochemical studies. Kröhnkite forms the thermodynamically stable phase as the hydration of saranchinaite to kröhnkite is highly exothermic (-51.51 ± 0.63 kJ mol-1). Structurally, kröhnkite offers a facile 2D pathway for Na+ ion migration resulting in 20 times higher total conductivity than saranchinaite at 60 °C. Both compounds exhibited a conversion redox mechanism for Li-ion storage with the first discharge capacity exceeding 650 mA h g-1 (at 2 mA g-1vs. Li+/Li) upon discharge up to 0.05 V. Post-mortem analysis revealed that the presence of metallic Cu in the discharged state is responsible for high irreversibility during galvanostatic cycling. This study reaffirms the exploration of Cu-based polyanionic sulfates, which while having limited (de)insertion properties, can be harnessed for conversion-based electrode materials for batteries.
The discovery of novel materials for industrial-standard hydrogen production is the present need considering the global energy infrastructure. A novel electrocatalyst, Pt3 Ge, which is engineered with a desired crystallographic facet (202), accelerates hydrogen production by water electrolysis, and records industrially desired operational stability compared to the commercial catalyst platinum is introduced. Pt3 Ge-(202) exhibits low overpotential of 21.7 mV (24.6 mV for Pt/C) and 92 mV for 10 and 200 mA cm-2 current density, respectively in 0.5 m H2 SO4 . It also exhibits remarkable stability of 15 000 accelerated degradation tests cycles (5000 for Pt/C) and exceptional durability of 500 h (@10 mA cm-2 ) in acidic media. Pt3 Ge-(202) also displays low overpotential of 96 mV for 10 mA cm-2 current density in the alkaline medium, rationalizing its hydrogen production ability over a wide pH range required commercial operations. Long-term durability (>75 h in alkaline media) with the industrial level current density (>500 mA cm-2 ) has been demonstrated by utilizing the electrochemical flow reactor. The driving force behind this stupendous performance of Pt3 Ge-(202) has been envisaged by mapping the reaction mechanism, active sites, and charge-transfer kinetics via controlled electrochemical experiments, ex situ X-ray photoelectron spectroscopy, in situ infrared spectroscopy, and in situ X-ray absorption spectroscopy further corroborated by first principles calculations.
Internal Ni-vacancy-enriched spherical AuNi nanoalloys (AuNi1-2-T) have been prepared via a noble electrochemical etching method. AuNi1.5-T showed the highest oxygen evolution reaction (OER) activity compared to bare AuNi1.5, and it demands only 239 mV overpotential, which was 134 mV lesser than the overpotential required by commercial RuO2 at 10 mA cm-2 current density in a 1 M KOH solution (pH = 14). The calculated turnover frequency (TOF) value for AuNi1.5-T (0.0229 s-1) was 11.74 times higher than that of AuNi1.5 (0.00195 s-1). Also, the electrochemically activated AuNi1.5-T showed superior neutral water oxidation activity by demanding only 335 mV overpotential with a TOF value of 0.000135 s-1 in a 1 M Na2SO4 solution (pH = 7) at 10 mA cm-2. The long-term stability studies (over 60 h) reveal the excellent robustness of an electrochemically treated alloy system. Density functional theory based electronic structure calculations showed that in the case of AuNi and AuNi1.5, Au d, Au s, and Ni d orbitals have significant contributions, whereas in the Ni-vacant systems, the density of states is mainly governed by d orbitals of Au and Ni. Also, the Ni-vacant system possesses a work function value of 4.96 eV, which is lower than that of the pristine system (5.27 eV) and thereby favored OH- binding with an optimum adsorption energy. This result is in reasonable agreement with the experimental outcome of an accelerated OER in a vacancy-enriched Ni-rich AuNi alloy system. Also, mechanistic analysis reveals that the creation of a Ni vacancy can effectively alter the overall mechanism of the OER and thereby facilitate the same with a lower applied energy.
Electronic structure calculations based on density functional theory are used to identify the catalytically active sites for the hydrogen evolution reaction on single layers of the two transition metal tri-chalcogenide compounds CoPS3 and NiPS3. Some of the under-coordinated P and S atoms at the edges are found to act as the active sites, the details of which depend on the coverage of H on the electrode. Overpotentials along the two possible pathways for HER are also estimated for the two materials. These findings not only resolve an apparent discrepancy between published experimental results and our earlier calculations, but also provide insights which can be used to enhance catalytic efficiency of these materials further.
We demonstrate synthesis of a new low-D hybrid perovskitoid (a perovskite-like hybrid halide structure, yellow crystals, P21/n space group) using zwitterion cysteamine (2-aminoethanethiol) linker, and its remarkable molecular diffusion-controlled crystal-to-crystal transformation to Ruddlesden-Popper phase (Red crystals, Pnma space group). Our stable intermediate perovskitoid distinctly differs from all previous reports by way of a unique staggered arrangement of holes in the puckered 2D configuration with a face-sharing connection between the corrugated-1D double chains. The PL intensity for the yellow phase is 5 orders higher as compared to the red phase and the corresponding average lifetime is also fairly long (143â ns). First principles DFT calculations conform very well with the experimental band gap data. We demonstrate applicability of the new perovskitoid yellow phase as an excellent active layer in a self-powered photodetector and for selective detection of Ni2+ via On-Off-On photoluminescence (PL) based on its composite with few-layer black phosphorous.
An excessive amount of CO2 is the leading cause of climate change, and hence, its reduction in the Earth's atmosphere is critical to stop further degradation of the environment. Although a large body of work has been carried out for post-combustion low-temperature CO2 capture, there are very few high temperature pre-combustion CO2 capture processes. Lithium silicate (Li4SiO4), one of the best known high-temperature CO2 capture sorbents, has two main challenges, moderate capture kinetics and poor sorbent stability. In this work, we have designed and synthesized lithium silicate nanosheets (LSNs), which showed high CO2 capture capacity (35.3 wt% CO2 capture using 60% CO2 feed gas, close to the theoretical value) with ultra-fast kinetics and enhanced stability at 650 °C. Due to the nanosheet morphology of the LSNs, they provided a good external surface for CO2 adsorption at every Li-site, yielding excellent CO2 capture capacity. The nanosheet morphology of the LSNs allowed efficient CO2 diffusion to ensure reaction with the entire sheet as well as providing extremely fast CO2 capture kinetics (0.22 g g-1 min-1). Conventional lithium silicates are known to rapidly lose their capture capacity and kinetics within the first few cycles due to thick carbonate shell formation and also due to the sintering of sorbent particles; however, the LSNs were stable for at least 200 cycles without any loss in their capture capacity or kinetics. The LSNs neither formed a carbonate shell nor underwent sintering, allowing efficient adsorption-desorption cycling. We also proposed a new mechanism, a mixed-phase model, to explain the unique CO2 capture behavior of the LSNs, using detailed (i) kinetics experiments for both adsorption and desorption steps, (ii) in situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy measurements, (iii) depth-profiling X-ray photoelectron spectroscopy (XPS) of the sorbent after CO2 capture and (iv) theoretical investigation through systematic electronic structure calculations within the framework of density functional theory (DFT) formalism.
A facile microwave-assisted strategy was employed to synthesize Ni3 Bi2 S2 nanocrystals. Variation in the synthesis conditions tuned the composition of monoclinic and orthorhombic phases of Ni3 Bi2 S2 . The electrochemical hydrogen evolution activity of the catalyst with highest percentage of monoclinic phase demonstrated a negligible onset potential of only 24â mV close to that of state-of-the-art Pt/C with an overpotential as low as 88â mV. Density functional theory calculations predicted the monoclinic phase exhibit the lowest adsorption free energy corresponding to hydrogen adsorption ( Δ G ads H * ) and, therefore, the highest hydrogen evolution activity amongst the considered phases. The quasi-2D structure of monoclinic phase facilitated an increased charge-transfer between Ni and Bi, favoring the downward shift of the d-band center to enhance the catalytic activity.
Symmetry broken configurations within a long-range atomic arrangement exhibit new physical properties, and distinctive strategies are needed to resuscitate the localized symmetry by introducing measured defects, which can be attractive in displaying enhanced catalytic activities for energy applications. Our hypothesis is validated by introducing lattice defects due to the strain originating from a slightly higher doped grain boundary (GB) than at the interconnected grains of perovskite oxide. When Pd is doped at the B-site of ABO3-type La0.7Sr0.3CoO3-δ, a marginally higher ionic radius of Pd4+ than Co3+ enables partial deportation of Pd4+ to the GB. Consequently, the GB unit cell is relatively expanded with a higher interplanar spacing, as observed by microscopic analysis. When the Pd concentration is increased, oxygen vacancy sites are reduced and both metallic Pd and PdOx are exsolved at the perovskite oxide surface. With the Pd/Co ratio of 0.05, the defects originating from the Pd-modulated GB can be maximized to 1.29 ± 0.21% which enhances the bifunctional O2 activation ability by lowering the combined overpotential of oxygen evolution and reduction reactions (OER/ORR) to 0.91 V, duly corroborated by computational studies. The fabricated rechargeable Zn-air battery has a specific capacity of 740 mA·h/gZn (851 mW·h/gZn) when discharge is performed at 10 mA/cm2. Galvanostatic charge-discharge cycling with a 1 h cycle time shows 60 h stable performance. The OER/ORR bifunctional activity is found to be strongly correlated to the repositioned lattice symmetry at the perovskite GB.
Light-emitting lead halide perovskite nanocrystals are typically obtained in a six-faceted cube shape. However, for applications such as catalysis, more active facets for the adsorption/desorption of reactants/products and the suppression of carrier recombination are essentially required. To meet these challenges, herein CsPbBr3 perovskite nanocrystals in cube and faceted noncube shapes were explored for photocatalytic reductions of CO2. Importantly, halide-deficient dim multifaceted noncube emitters having less than 1% photoluminescence quantum yields showed superior catalytic activity compared to that of bright halide-rich cube nanocrystals. Beyond these, hexapod-shaped nanocrystals were also explored, and these remained in an intermediate state. With the support of density functional theory, the adsorption and desorption probabilities of reactants/products on different facets were also calculated and correlated with experimental findings. These results indicated that facets and defects of perovskite nanocrystals are equally important for carrying out catalytic reactions.
Recent experiments showed that some layered ternary transition metal trichalcogenide compounds are efficient catalysts for the hydrogen evolution reaction (HER). Motivated by these, we have combinatorially designed and computationally screened, through an efficient, automated approach based on density functional theory, single layers of such compounds, including those not reported in widely used crystal structure database like the International Crystal Structure Database (ICSD), for their efficiency as HER catalysts. On the basis of our theoretical prediction of overpotentials determined from the reaction coordinate mapping corresponding to the HER mechanism, 13 of these compounds are found to be promising catalysts, out of which three are suggested to be as efficient as platinum, the best known HER catalyst to date.
Five-fold intertwined Agx Ni1-x (x=0.01-0.25) heterogeneous alloy nanocrystal (NC) catalysts, prepared through unique reagent combinations, are presented. With only ca. 5â at % Ag (AgNi-5), Pt-like activity has been achieved at pHâ 14. To reach a current density of 10â mA cm-2 the extremely stable AgNi-5 requires an overpotential of 24.0±1.2â mV as compared to 20.1±0.8â mV for 20 % Pt/C, both with equal catalyst loading of 1.32â mg cm-2 . The turnover frequency (TOF) is as high as 2.1 H2 â s-1 at 50â mV (vs. RHE). Site-specific elemental analyses show the Ag:Ni compositional variation, where the apex and edges of the decahedra are Ag-rich, thereby exposing Ni onto the faces to achieve maximum charge transport for an exceptional pH universal HER activity. DFT calculations elucidate the relative H-atom adsorption capability of the Ni centers as a function of their proximity to Ag atom.
We have envisaged the hydrogen evolution and oxygen evolution reactions (HER and OER) on a two-dimensional (2D) noble-metal-free titanium disulfide (TiS2 ) monolayer, which belongs to the exciting family of transition metal dichalcogenides (TMDCs). Our theoretical investigation to probe the HER and OER on both the H and T phases of 2D TiS2 is based on electronic-structure calculations witihin the framework of density functional theory (DFT). Since TiS2 is the lightest compound among the group-IV TMDCs, it is worth exploring the catalytic activity of a TiS2 monolayer through the functionalization at the anion (S) site, substituting with P, N, and C dopants as well as by incorporating single sulfur vacancy defects. We have investigated the effect of functionalization and vacancy defects on the structural, electronic, and optical response of a TiS2 monolayer by determining the density of states, work-function, and optical absorption spectra. We have determined the HER and OER activities for the functionalized and defective TiS2 monolayers based on the reaction coordinate, which can be constructed from the adsorption free energies of the intermediates (H*, O*, OH* and OOH*, where * denotes the adosrbed state) in the HER and OER mechanisms. Finally, we have shown that TiS2 monolayers are emerging as a promising material for the HER and OER mechanisms under the influence of functionalization and defects.
