Precision-milled simulated curved root canals in bovine dentine for the assessment of chemo-mechanical root canal preparation.

AIM: The aim was to develop a standardized curved root canal model in bovine dentine and to assess whether that natural substrate would behave differently from the resin in standard plastic training blocks when prepared chemo-mechanically. The impact of substrate microhardness on simulated canal transportation was considered. METHODOLOGY: High-precision computer numerical control (CNC) milling was used to recreate a simulated root canal from a resin training block (Endo Training Bloc J-Shape, size 15) in longitudinally sectioned, dis- and re-assembled bovine incisor roots. Optical overlays obtained from 10 resin blocks were used to identify an average canal and program the CNC milling apparatus accordingly. Resin and dentine microhardness were measured. Simulated root canals in resin training blocks and their bovine counterparts were then instrumented at 37°C using Reciproc R25 instruments (VDW) with water or 17% EDTA (n = 10). Open-access image processing software was used to superimpose and analyse pre- and postoperative images obtained with a digital microscope. Centering ratios were averaged to indicate canal transportation. The effects of substrate and irrigant on canal transportation were assessed by two-way anova. RESULTS: Superimposed images showed that resin blocks under investigation varied considerably in terms of simulated canal length and curvature, whilst the milled canals were highly similar. The microhardness of dentine was more than three times higher than that of the resin. Conversely, canal transportation was considerably greater in dentine compared to resin, and in dentine had a tendency to be increased by EDTA. There was a strong effect of substrate on canal transportation (p < .001), no overall effect of irrigant, and a marginally significant interaction between irrigant and substrate (p = .077). CONCLUSIONS: CNC milling allows to create standardized simulated curved root canals in bovine dentine. These models may be useful to test and compare materials and concepts of chemo-mechanical root canal instrumentation. Microhardness is a bulk feature that does not predict the response to chemo-mechanical instrumentation of a composite material such as dentine.

A laboratory pilot study on voids in flowable bulk-fill composite restorations in bovine Class-II and endodontic access cavities after sonic vibration.

This pilot study investigated whether sonic-powered application of a bulk-fill resin-based composite (RBC) in Class-II or endodontic access cavities reduces void formation. The crowns and roots of 60 bovine teeth with Class-II cavities (C) and endodontic access cavities (E) respectively, were assigned to ten groups (C1-C5, E1-E5). Cavities were filled with RBC (SDR flow + , one increment) using different application techniques: no adaptation (C1 + E1), spreading of RBC on the cavity surfaces with a dental explorer tip (C2 + E2), low (C3 + E3) or high frequency (C4 + E4) direct activation by inserting a sonic-powered tip into RBC and high frequency indirect activation with an ultrasonic insertion tip (C5 + E5). The restorations were light-cured and investigated for voids using microtomography. The number of voids and percentage of voids related to the volume were statistically analysed (α < 0.05). While most voids in Class-II restorations were observed in C4 (p ≤ 0.0031), no significant differences were found between the other groups (p > 0.05). The percentage of voids showed no differences in E1-E5 (p > 0.05). C4 showed a significantly higher percentage of voids compared to C2 (p < 0.001). There is no benefit in applying sonic vibration when filling Class-II or endodontic access cavities.

Toothpastes with Enzymes Support Gum Health and Reduce Plaque Formation.

Enzymes in toothpastes can support host immune responses, and thus maintain oral health. This study aimed to investigate gingival health and the plaque-reducing effects of enzyme-containing toothpastes. A laboratory study tested the antimicrobial potential of different enzyme-containing toothpaste formulations. Two promising formulations (enzyme-containing toothpastes with glucose oxidase and D-glucose with (C+) and without Citrox (C-) Citrox) were investigated in a clinical crossover trial (two slurries: sodium lauryl sulfate-containing (SLS), a toothpaste without SLS (reference), and water). Subjects (n = 20) abstained from toothbrushing for four days and rinsed with a toothpaste slurry. Bleeding on probing (BOP) and plaque indices (PI) were measured. A mixed linear model was used to statistically compare the slurries with respect to BOP and PI change. The in vitro bacterial growth-inhibiting evaluation showed the best results for SLS, followed by C+ and C-. The change in BOP and PI exhibited statistically significant differences to water rinsing (BOP; PI changes in % points (difference of the baseline and post-rinse values: water = 8.8%; 90.0%; C+ = -1.4%; 80.4%; SLS = 1.5%; 72.1%; reference = 0.8%; 77.5%; C- = -1.8%; 75.1%). All slurries exhibited anti-gingivitis and anti-plaque effects, resulting in a prophylactic benefit for limited-access regions during brushing.

Silane Effect of Universal Adhesive on the Composite-Composite Repair Bond Strength after Different Surface Pretreatments.

This study investigated the impact of a separate silanization step on the repair bond strength of composite substrates using a universal adhesive after various mechanical surface treatments. Composite specimens were aged and exposed to the following mechanical roughening treatments: diamond bur abrasion, aluminum oxide sandblasting, or silica coating. The specimens were then either left untreated or conditioned with universal adhesive (Scotchbond Universal), or a silane coupling agent was applied before the use of the universal adhesive or a conventional adhesive (Optibond FL). The conditioned surfaces and fresh substrate (positive control group) were covered with repair composite, and microtensile bond strength testing was performed. The significantly highest bond strength was obtained in the positive control group. Repair bond strength of the universal adhesive applied after a separate silanization step was similar to that without prior silanization, independent of the mechanical surface treatment. Moreover, after silica coating, no significant differences in the repair bond strength were detected among the different adhesive treatments. In conclusion, a separate silanization step before surface conditioning with the universal adhesive does not enhance the repair bond strength. On silica-coated composite substrates, repair bond strength values of the universal adhesive were similar to those of the conventional adhesive.

Transforming Growth Factor Beta 1 Distribution and Content in the Root Dentin of Young Mature and Immature Human Premolars.

INTRODUCTION: Transforming growth factor beta 1 (TGF-ß1) is a key morphogen in regenerative endodontics; yet, its location within the hard tissue phase of dentin and its availability in mature roots have not been fully elucidated. METHODS: Young mature (n = 8) and immature (n = 11) roots from sound premolars were obtained from 13 orthodontic patients aged 17 ± 1 and 12 ± 1 years, respectively. Roots were cleaned of organic remnants in 5% sodium hypochlorite. The width of the minor foramen was measured using a digital microscope. TGF-ß1 distribution was assessed in 3 roots per group by immunostaining combined with confocal laser scanning microscopy. The root dentin of the remaining 13 roots was powdered and decalcified in 17% EDTA to determine the overall levels of hard tissue-embedded TGF-ß1 by enzyme-linked immunosorbent assay. Data were compared between groups using the Student t test (α = .05). RESULTS: The minor foramen was 168 ± 49 µm versus 557 ± 295 µm in mature compared with immature roots (P < .05). TGF-ß1 was highly stainable toward the pulp space in both groups. It was clearly associated with peritubular dentin and apparently absent in nontubular outer dentin. TGF-ß1 content was 115 ± 31 pg and 74 ± 35 pg/100 mg mature versus immature root dentin, respectively (P > .05). CONCLUSIONS: TGF-ß1 is deposited into the peritubular dentin. It should be possible to release this molecule in regenerative endodontic procedures from young mature roots as well as immature roots.

Influence of Different Pretreatments on the Microtensile Bond Strength to Eroded Dentin.

PURPOSE: To evaluate the influence of different pretreatments on the microtensile bond strength (µTBS) of an etch-and-rinse adhesive to eroded dentin. MATERIALS AND METHODS: Thirty-six human teeth were ground down to their dentin layer and randomly divided into six groups (G1-G6; n = 6), G1 being the control group. Only in the test groups (G2-G6) were samples subjected to erosion using citric acid (pH 2.6) 10 x 2 min per day for five days. Between the erosive attacks, samples were stored in artificial saliva. After pretreatment - none (G1); none (G2); 2% chlorhexidine (30 s) (G3); prolonged primer application (1 min) (G4); roughening with a diamond bur (G5) and 10.5% NaOCl (1 min) (G6) - the adhesive OptiBond FL was applied. After the application of composite, samples were stored in water (7 d) and µTBS was determined. Data were evaluated using one-way ANOVA and Dunnett-T post-hoc test (p < 0.05). RESULTS: Eroded dentin without pretreatment (G2) resulted in significant reduction of µTBS compared with uneroded dentin (G1). µTBS after pretreatment with a diamond bur (G5) or NaOCl (G6) was not significantly different from that of the uneroded control group (G1). µTBS after pretreatment with chlorhexidine (G3) or with prolonged primer application (G4) was significantly lower than in the uneroded control group (G1), and not significantly different from the eroded control group (G2). CONCLUSION: The present data suggests that µTBS to eroded dentin pretreated with bur abrasion or NaOCl is similar to the µTBS to sound, uneroded dentin.