Polyurethane sponges bearing cucurbituril adsorb Cr(III) and Pb(II) ions from contaminated water samples.

Water contamination with toxic metals causes harmful effects on the environment and to human health. Although cucurbiturils have carboxyl groups in their portal that can interact with metal ions, there is a lack of studies about their use as metal adsorbent. This scenario has motivated conduction of the present study, which addresses the use of cucurbit[6]uril (CB[6]) and cucurbit[8]uril (CB[8]) for adsorbing Pb and Cr from water samples, in free forms and immobilized in poly(urethane) sponges. The adsorption kinetics revealed that CB[8] leads to faster adsorption compared to CB[6], with equilibrium achieved in 8 h for CB[8] and 48 h for CB[6] for both metals, and achieved up to 80% of decrease in metal concentration. The Langmuir isotherm model provided a better description of adsorption for Cr and Pb in CB[6] and Pb in CB[8] with a maximum concentration adsorbed of 32.47 mg g-1 for Pb in CB[6], while the Dubinin-Radushkevich model was more suitable for Cr adsorption in CB[8]. Sponges containing CB[6] and CB[8] have proven to be efficient for Pb and Cr remediation in tannery effluent samples, reducing Cr and Pb concentration by 42 and 33%, respectively. The results indicate that CB[6] and CB[8], whether used in their pure form or integrated into sponges, exhibit promising potential for efficiently adsorbing metals in aqueous contaminated environments.

Electrical semiconduction modulated by light in a cobalt and naphthalene diimide metal-organic framework.

Metal-organic frameworks (MOFs) have emerged as an exciting class of porous materials that can be structurally designed by choosing particular components according to desired applications. Despite the wide interest in and many potential applications of MOFs, such as in gas storage, catalysis, sensing and drug delivery, electrical semiconductivity and its control is still rare. The use and fabrication of electronic devices with MOF-based components has not been widely explored, despite significant progress of these components made in recent years. Here we report the synthesis and properties of a new highly crystalline, electrochemically active, cobalt and naphthalene diimide-based MOF that is an efficient electrical semiconductor and has a broad absorption spectrum, from 300 to 2500 nm. Its semiconductivity was determined by direct voltage bias using a four-point device, and it features a wavelength dependant photoconductive-photoresistive dual behaviour, with a very high responsivity of 2.5 × 105 A W-1.

Comparison between cucurbiturils and ß-cyclodextrin interactions with cholesterol molecules present in Langmuir monolayers used as a biomembrane model.

Specific surface techniques can probe the interaction of cholesterol (Chol) with substances that are able to host and/or sequester this biomolecule, provided that the additives are properly assembled at the interface. Reports on inclusion complexes of Chol with ß-cyclodextrins exist in the literature. Here we compare the interaction of ß-cyclodextrin and cucurbiturils with Chol present in Langmuir phospholipid (dipalmitoylphosphatidylcholine, DPPC) monolayers, used as a biomembrane model. Cucurbiturils, CB[n], comprise macrocyclic host molecules consisting of n glycoluril units. Classic surface pressure curves, dilatational surface viscoelasticity measurements, and fluorescence emission spectra and images obtained by time-resolved fluorescence of the corresponding Langmuir-Blodgett films have shown that homologues with 5 and 6 glycoluril units, CB[5] and CB[6], do not form inclusion complexes. Higher-order homologues, such as CB[7], are likely to complex with Chol with changes in the minimum molecular areas recorded for DPPC/Chol monolayers, the fluorescence decay lifetimes, and the dilatational surface viscosities of the monolayers generated in the presence of these molecules. Moreover, we proof the removal of cholesterol from the biomimetic interface in the presence of CB[7] by means of fluorescence spectra from the subphase support of monolayers containing fluorescent-labeled Chol.

Self-assembled naphthalenediimide derivative films for light-assisted electrochemical reduction of oxygen.

This naphthalene diimide derivative, DC18, forms highly conjugated semiconducting stacked assemblies over electrodes after electrochemical conditioning. These molecular materials are very efficient towards electrochemical photoreduction of oxygen under visible light.

A technique to produce thin cucurbit[6]uril films.

We report a methodology to obtain thin films of cucurbit[6]uril, starting from ammoniacal solutions. This technique is very useful for the obtention of modified electrodes or other substrates for sensor purposes. Cucurbit[6]uril is insoluble in most media, and film formation was impossible until now.