Skull asymmetry in various sheep breeds: Directional asymmetry and fluctuating asymmetry.

Sheep (Ovis aries) play an important role in the economy of Turkey and the Balkan Peninsula due to their use in farming. As a domesticated species, sheep's morphometric and morphological diversity is likely determined by selective breeding practices rather than geographic distribution. This study aimed to analyse four different sheep breed skulls and reveal skull asymmetry using geometric morphometric methods. For this purpose, 2D images of 52 sheep skulls from different breeds were analysed from the dorsal view of the skull, using 28 landmarks. In the comparison of sheep skulls from the dorsal view, the first principal components for directional asymmetry (DA) and fluctuating asymmetry (FA) were 32.98% and 39.62% of the total variation, respectively. Sharri and Ivesi (Awassi) sheep breeds had the broadest distribution of skull shapes among the breeds, while Lara e Polisit was the most conservative breed. DA was used as a measure of biomechanical constraints, and FA was used as an indicator of environmental stress. Consistent with DA, both differences in centroid size and shape between breeds were statistically significant. No differences between males and females related to asymmetry were revealed. Ivesi sheep revealed the highest fluctuating asymmetry. Geometric morphometric methods proved to be a useful tool for distinguishing differences in the shape of the skull of different sheep breeds and also can be useful for taxonomic purposes.

Orbital shape in goat and sheep: Symmetric analysis.

The aim of this study is to evaluate orbital symmetry in goat and sheep skulls. For this purpose, a total of 83 skulls, including 50 sheep and 33 goat skulls, were used in the study. Geometric morphometry method was applied. For symmetric analysis, one side of each orbit was photographed twice and mirror images were created. There were 36 landmards marked to determine the outer limit of the orbita. As a result of the study, asymmetric components (fluctuating asymmetry and directional asymmetry) for shape were statistically significant in both goats and sheep (p < 0.0001). The first three principal components explained 52.558% of the total shape variation in goats and 61.245% in sheep. This value for symmetric components was 59.095% and 67.742% for goats and sheep, respectively, and 66.791% and 71.154% for asymmetric components. As a result of discriminant function analysis, right and left orbital shapes showed grouping characteristics with similar success rates according to species. Although limited, the right orbit in goats (100%) and the left orbit in sheep (96.5%) were grouped more accurately.

Comparison of craniometric measurements of New Zealand rabbit (Oryctolagus cuniculus L.) using three-dimensional scanner with digital calliper measurements: A methodological study.

As technology has developed in recent years, the use of three-dimensional (3D) scanners and printers has become widespread in the medical field. However, since this field is new, all kinds of methodological and experimental related studies gain importance. This study aimed to identify the differences between the calliper measurements by determining the craniometric data on the models constructed by scanning the crania of New Zealand Rabbits (Oryctolagus cuniculus L.), preferred as experimental animals, with a three-dimensional scanner. Therefore, a total of 12 New Zealand rabbits including 6 females and 6 males were used. After the crania that comprised the study material were macerated, they were subjected to 3D scanning. After the scanning process was completed, they were craniometrically measured both on the scanned models and by using a digital calliper. Analysis of the craniometric data of the 3D scanner showed that there was a difference between sexes at the level of p < 0.05 in widest length between the external acoustic meatus (WLBEAM), skull width and Foramen magnum height (FMH) parameters and cranial index data, and at the level of p < 0.001 in the largest nasal width (LNW) parameter. A statistical difference was found between sexes in frontal length, WLBEAM, LNW and FMH parameters and cranial index values in craniometric data collected with the digital calliper (p < 0.05). Consequently, the data collected in this study were found to be close to each other in both methods, suggesting that the 3D scanner may be used in morphometric studies.

Orbital shape in sheep and goats with sex and breed factors.

The purpose of this study was to identify the dimorphic structures of the orbita based on breed and sex factors through shape analysis across species. Additionally, the study aimed to ascertain the variability between the two species. A total of 86 (51 sheep-Akkaraman [Ak] and Morkaraman [Mk], 35 goats-Hair [Hr] and Honamli [Hm]) skulls were used in the study. It was decided to designate 36 landmarks to represent the orbit's edge. In the principal component analysis, 68 PCs were calculated. It was determined that PC1, PC2 and PC3 explained the total variance in morphology by 26.909%, 16.147% and 13.616%, respectively. According to the cross-validation results, the goats were grouped with 95% (Hm: 100%, Hr: 90%), while the sheep were grouped with 56% (Ak: 50%, Mk: 63%). Therefore, dimorphism among goat breeds on orbita shape was more pronounced compared to sheep. In the discriminant function analysis of the sex groups, Procrustes and Mahalanobis distance values in goats were 0.04425425 (p < 0.0001) and 5.3733 (p = 0.9550), in sheep 0.03513424 (p < 0.0001) and 7.1003 (p = 0.9414), respectively, was detected. According to the cross-validation results, in terms of sex, goats were correctly grouped at a rate of 74% (F: 73%; M: 75%) and sheep breeds were correctly grouped at a rate of 72% (F: 77%; M: 66%). Factors such as habitat selection, breeding behaviours and ecological environment may show anatomical differences within breeds as well as between breeds. Therefore, various measurement techniques are used to reveal these differences. As a result, it is thought that the study will contribute to many disciplines, especially taxonomy and zooarchaeology, by analysing the shape of the orbita of sheep and goat breeds, the domestication of which dates back to ancient times, and revealing the similarities and differences between species and according to sex.

Three-dimensional modelling and morphological investigation of the bones of the Articulatio genus using computed tomography images in Van cats.

In this study, it was aimed to make three-dimensional reconstruction of the stifle joint computed tomography (CT) images of the Van cats, to obtain their osteometric measurements, and to determine the statistical biometric differences of these measurement values in terms of both sexual dimorphism and homotypic variations. A total of 16 healthy adult Van cats of both sexes were used. The stifle joints of the cats were scanned with a CT device and images were obtained. Three-dimensional reconstructions of the bony structures of the stifle joint were performed using CT images using the MIMICS 20.1 modelling program. Then, osteometric measurements were calculated, and statistical analysis was performed. When the morphometric measurement values were examined in terms of gender, it was observed that almost all of the osteometric measurement values of the stifle joint in Van cats (except SPW measurement) were higher in male cats. According to homotypic variations, right side TPW (p = 0.009), TPCMA (p = 0.003) and TPMCA (p = 0.032) measurement values in female cats and right side TPLCA (p = 0.002) measurement values in male cats were found to be statistically significantly higher than the left side from the measurements of only the proximal tibia (p < 0.05). In general, although there were negative correlations between morphometric measurement values with age and body weight, mostly strong positive correlations were seen. As a result, statistical differences of the biometric values and anatomical features of the stifle joint between the sexes in Van cats between the sexes were examined using CT and a three-dimensional modelling program.

Rye-grass-derived probiotics alleviate heat stress effects on broiler growth, health, and gut microbiota.

The primary aim of this study was to assess the impact of liquid (S-LAB) and lyophilized (L-LAB) probiotics sourced from Rye-Grass Lactic Acid Bacteria on broilers experiencing heat stress. The study involved 240 broiler chicks divided into six groups. These groups included a negative control (Control) with broilers raised at a normal temperature (24 °C) on a basal diet, and positive control groups (S-LAB and L-LAB) with broilers under normal temperature receiving a lactic acid bacteria supplement (0.5 mL/L) from rye-grass in their drinking water. The heat stress group (HS) comprised broilers exposed to cyclic heat stress (5-7 h per day at 34-36 °C) on a basal diet, while the heat stress and probiotic groups (S-LAB/HS and L-LAB/HS) consisted of broilers under heat stress supplemented with the rye-grass-derived lactic acid bacteria. Results indicated that heat stress without supplementation (HS) led to reduced body weight gain, T3 levels, citrulline, and growth hormone levels, along with an increased feed conversion ratio, serum corticosterone, HSP70, ALT, AST, and leptin levels. Heat stress also negatively impacted cecal microbiota, decreasing lactic acid bacteria (LABC) while increasing E. coli and coliform bacteria (CBC) counts. Probiotic supplements (S-LAB/HS and L-LAB/HS) mitigated these effects by enhancing broilers' resilience to heat stress. In conclusion, rye grass-derived S-LAB and L-LAB probiotics can effectively support broiler chickens under heat stress, promoting growth, liver function, hormonal balance, gut health, and cecal microbiome ecology. These benefits are likely mediated through improved gut health.

Macroscopic and microscopic comparison of pecten oculi in different avian species.

The current study aims to present differences between the pecten oculi of different avian species through morphologic, macroscopic, light, and electron microscopic examinations. The study is a comprehensive research on seven avian species (sparrowhawk, hawk, magpie, swan, heron, pheasant, duck). The right eyes of the animals utilized in the study were removed for light microscopic examination, whereas their left eyes were removed for electron microscopic and macroscopic examinations. Morphometric analyses, as well as stereo and light microscopic measurements, were carried out on the pecten oculi of the animals. Given all these data, it was determined that the height of the pecten oculi did not differ among the species in the study; however, the pecten oculi were larger in birds with the highest value compared to the other species in the macroscopic measurements. Also, the pecten oculi vessels were larger, and the number of melanocytes was higher in keen eyesight, raptor, and migratory birds with large bulbus oculi. All these data suggest that the pecten oculi not only supplies nutrient to the retina but also contributes to sharp vision during migration and hunting, UV absorption from sunlight, as well as preservation of intraocular equilibrium.

Skull variation in different breeds sheep from Balkan countries.

The Balkan Peninsula region has a very diverse agricultural and livestock tradition, and almost every country has its own local breed of sheep. Different breeds of sheep and different breeding traditions, despite the small geographical distance, determine the morphological and morphometric variability among animal breeds. In this study, this morphological diversity among the skulls of sheep breeds of some countries in the Balkan region was examined by the geometric morphometric method. 2D images of 86 sheep skulls from five different countries were analyzed from the dorsal view.Sixteen landmarks were used. The Bardhoka and the Ivesi breed have the broadest distributions of skull shape amongst the sheep breeds. The Ruda sheep is the most morphologically conservative. The sheep from Turkey (Ivesi) and Kosovo (Bardhoka) seem to differ mainly from sheep from other Balkan countries. Bardhoka and Ruda differ most from each other (p < 0.0001). The next biggest differences were between Ivesi and Ruda (p < 0.0011) and between Bardhoka and Sharri sheep (p < 0.0016). The sheep breeds Dubska and Lara e Polisit differ the least from each other. Geometrics morphometric analysis is a useful tool to detect differences in the shape of the skull of different sheep breeds and can therefore be used successfully for taxonomic purposes.

Morphometric analysis of the skull of Hamdani sheep via Three-Dimensional modelling.

The aim of the present study was to determine the craniometric characteristics of the crania of Hamdani sheep, one of local breeds of Turkey, by using computed tomography (CT). In the study, 13 (six female and seven male) skulls were used. After CT images of the skulls were taken, their three-dimensional models were created by MIMICS 20.1 (The Materialise Group, Leuven, Belgium) program. Thirty-eight craniometric measurements were taken over the models created and nine indices were calculated by using these measurements. All the characteristics examined were expressed as mean ± SE. In the study, statistically significant differences were found between females and males in terms of greatest neurocranium breadth, facial breadth, greatest palatal breadth (p < 0.05) and height of the foramen magnum (p < 0.01) parameters. No statistically significant difference was observed between the sexes in the calculated index values (p > 0.05). In conclusion, it is thought that the findings obtained from the study will contribute to the zooarchaeology and sheep taxonomy of Mesopotamian region.

Shape differences of the Carina sterni in birds of various locomotion types.

The anatomy of the sternum in birds varies according to their habitats and type of locomotion. In particular, the carina sterni manifest different shape variations. In this study, the shape of the carina sterni was investigated by means of geometric morphometrics. Birds of different types of locomotion were used in the study: flying, swimming, and terrestrial. Ducks and chickens show a wider variety of shapes. Pigeons are the species with the least differences. The margo cranialis carinae in a turkey is the flattest compared to other species. In chickens, the apex carinae is more caudally than the base of the carina sterni. The margo cranialis of the carina sterni in ducks is concave. The differences in centroid size and shape differences between species collectively are statistically significant (p < 0.0001). The most distinct shape contrast is between the duck and turkey (p: 0.0003). Form differences between the ducks and geese as well as between the chicken and turkey are statistically insignificant. There is less variation in the shape of the carina sterni among avian species representing the same type of locomotion. Although there are many comparative morphological and morphometric studies of birds, shape analysis studies revealing the interspecific differences and similarities of the sternum are very limited. Morphology of the carina sterni can be useful in taxonomic investigations.

Geometric analysis of otoliths in Cyprinion kais and Cyprinion macrostomus.

Cyprinion macrostomus and Cyprinion kais are species that inhabit in the Tigris River. These fishes, formerly considered as the same species, have been listed as different species by taking differences in jaw and mouth structures into consideration. The mouth shape of C. kais is distinct and small. The mouth is convex and has broad lateral lobes. The mouth of C. macrostomus is wider, is convex and lacks lateral lobes. This study aimed to determine the shape-dependent variability in the breed and sex factors of otoliths of the fish species C. kais and C. macrostomus. For this purpose, 30 right otoliths from both species were used. Geometric morphometric analyses were performed by marking semilandmarks on the otoliths. When examining the results of the analysis, it was found that the first base component accounted for the total shape difference by 26.871% and the first three base components accounted for the total shape difference by 52.235%. In the regression analysis of shape on dimension, it was found that 2.1020% of shape could be estimated in terms of size according to the groups. In the wire-frame wrap graph showing group-based shape differences, it was found that C. kais was wider than C. macrostomus at the level of the dorsal margin and the rostrum region of C. macrostomus was larger and sharply pointed. Consequently, it is believed that the data of the study can be reference for many disciplines, especially for taxonomic classification of species.

Investigating metacarpi of Hamdani sheep via different measurement and modelling methods: A methodological study.

The aim of the study was to perform the morphometric analyses on metacarpi of Hamdani sheep via different measurement methods and to compare the methods. Thus, metacarpal bones of 15 females and 15 males were used in the study. Measurements were taken from the measurement points determined on metacarpus via four methods, and their statistical analyses were performed. When both male and female metacarpal bones were examined in the De parameter in the comparison with the methods, it was observed that the four measurement methods were different from one another (p < 0.01). When DEM and DEL measurement parameters were examined in male metacarpus, the highest value was measured in ImageJ and the smallest value was measured in 3D Slicer software; however, it was found that the statistical difference was not significant when compared numerically (p > 0.05). As a result, while it was observed that the measurements made by using digital calliper measurements, photometric analysis, and 3D software were similar in some of the parameters but there was no statistically significant difference; whereas, Statistical difference was detected in some parameters.

Sex Determination in Japanese Quails (Coturnix japonica) Using Geometric Morphometrics of the Skull.

The study investigated whether there is a morphological difference between the shape of the female and male quail's skulls. For this purpose, 18 female and 21 male quails were used. After the skulls were obtained, their photographs were taken, and geometric analysis was performed. Dorsal (14 landmarks), caudal (8 landmarks), and ventral (13 landmarks) images of skulls were evaluated. As a result of the Principal Component Analysis (PCA), 28 principal components (PCs) were obtained for dorsal view, 16 PCs for caudal view, and 26 PCs for ventral view. PC1 (41.206%) for the caudal aspect explained the highest shape variation in terms of sex. It was seen that PC1 for dorsal view explained 33.046% and PC1 for ventral view explained 34.495% shape variation. For the dorsal view, the orbital pit of males was found to be deeper than females. The foramen magnum was narrower in female skulls. The lateral borders of the neurocranium were more pointed upwards in males. On ventral view, it was seen that male individuals had a wider skull in shape. Geometrically, it was determined that the male and female distinction was the best in the dorsal view. According to the dorsal view, only one male individual was found to be in the female group, and all other male individuals were completely separated from the females. After the dorsal view, the best distinction was seen ventrally. In the caudal examination, sexual discrimination was not fully seen. In this study, shape differences in quail's skulls were examined between sexes, and shape differences were revealed geometrically. In addition to traditional morphometry studies, it is thought that geometric analysis studies will add a useful perspective to the literature.

The lumbosacral Plexus of the Barn Owl (tyto alba): Formation, branches and distribution.

The aim of the present study is to reveal the anatomical structure of lumbosacral plexus of barn owl. Six barn owls were included in the study. Nerves originating from plexus were dissected individually, and findings of innervation areas of nerves were determined. Lumbosacral plexus of barn owl was observed to be formed by ventral rami of ten synsacral spinal nerves. It was found that while the r. cutaneus femoris lateralis, the n. obturatorius, the n. coxalis cranialis, the r. cutaneus femoris medialis, the n. cutaneus femoris cranialis and the n. femoralis originated from the lumbar plexus, the n. isciofemoralis, the n. cutaneus femoris caudalis, the n. coxalis caudalis and the n. ischiadicus originated from the sacral plexus. Consequently, when the results of the study were compared with information of different avian species, it was observed that differences focused on the formation of the lumbar and sacral plexuses and innervation level of digits.

A three-dimensional pelvimetric assessment on pelvic cavity of gazelle (Gazella subgutturosa) by computed tomography.

The gazelles (Gazella subgutturosa), which are at the risk of extinction and are legally protected, have a cultural and aesthetic value in Turkey. It becomes incredibly important to increase their numbers in order to ensure their survival. In this context, it is required to examine thoroughly the pelvic cavity which contains reproductive organs and is used as the birth canal, as well. This study was conducted to determine the pelvimetric data of the gazelles by scanning their pelvic cavity via a multidetector computed tomography (MDCT) and preparing three-dimensional models of the pelvic cavity. Twelve adult (6 females, 6 males) gazelle carcasses were used in the study. After the pelvic cavity was scanned using the MDCT device with 64 detectors at 80 kV, 200 mA, 639 mGY and 0.625 mm cross-section thickness, the MDCT images were obtained. The three-dimensional models of the images obtained using MIMICS 20.1 (The Materialise Group, Leuven, Belgium) program were prepared. Pelvimetric measurements of the pelvic cavity were taken using these models. It was determined based on the pelvimetric examinations that there was a significant difference between the female and male gazelles in terms of conjugate diameter, vertical diameter, intermediate traversal diameter, and cranial and medial transverse diameter data at p < .05. Also, there was a significant difference in their data related to caudal transverse diameter and ischial arch at p < .01. Consequently, it is thought that the use of pelvimetric values belonging to the pelvic cavity of gazelles would reveal the sexual dimorphism of the species and its differences with other species and would contribute to clinical sciences.

Macroanatomic, light and scanning electron microscopic structure of the pecten oculi in northern bald ibis (Geronticus eremita).

Eyes are the most primarily required sensory organs during the migration of migratory birds and Northern Bald Ibises (Geronticus eremita) are known to make long migrations. This study examined for the first time the structure of pecten oculi in northern bald ibises by using macroscopic anatomy as well as light and electron microscopic methods. In the study 20 eye globes from 10 adult bald ibises were used. The pecten was of pleated type. As in most bird species, it was located on the optic nerve head and projects into the vitreous from the optic nerve head. The wider basal part was observed to attached to retina and its free apical part was found in camera vitrea bulbi embedded in corpus vitreum. The pecten had 13-14 accordion like pleats lying between the basal and apical parts. In addition to arterial and venous vessels, numerous capillary vessels as well as melanocytes were observed within each pleat. The bridge binding the pleats at the apical part showed a stronger pigmentation compared to other parts of the pecten. The results of the study indicated that the general morphology of pecten oculi in northern bald ibises which is a migratory bird species were similar to that in other diurnal bird species.

Three-dimensional modelling of computed tomography images of limb bones in gazelles (Gazella subgutturosa).

The objective of the present study was to model in 3D the detailed morphometric features of the thoracic and pelvic limb bones of the gazelle (Gazella subgutturosa), whose natural habitat is only in the Sanliurfa province, by using multidetector computerized tomography (MDCT) images. Materials from 14 (7 male and 7 female) dead gazelles were collected from the Harran University Veterinary Medicine Faculty clinics during or after treatment. MDCT images of the gazelles were taken and saved as DICOM (Digital Imaging and Communications in Medicine) files. MIMICS 20.1 software was used to generate a 3D reconstruction of the data, and morphological and morphometrical evaluation was performed. In respect of morphological features, the combined metacarpus (Mc) III and metacarpus Mc IV were the main weight-bearing metacarpal bone, while Mc II and Mc V were rudimentary. On the femur, the lateral condyle was bigger than the medial condyle at the caudodistal end and the medial wing of the trochlea femoris was larger than the lateral. As with the thoracic limb, the combined metatarsus (Mt) III and metatarsus Mt IV were the main weight-bearing metacarpal bone and they displayed a synostosis structure. There was no secondary metatarsus in the gazelles' pelvic limb. Based on digital measurements, the tibia was the longest bone of the gazelles' skeletal system, and there was a statistically significant sexual dimorphism throughout the skeleton at the levels of p < .05, p < .01 and p < .001. As a result, the present study's findings are useful as reference data for further studies on anatomy, surgery and archaezoology, while also being useful for classifying species and for forensic sciences.

A study on morphology and morphometric parameters on skull of the Bardhoka autochthonous sheep breed in Kosovo.

In this study, we aim to investigate the skull of Bardhoka sheep, which is the native breed of Kosovo by utilising normal morphometric methods. Differences between male and female were also statistically analysed. Further, the parameters that can be used in gender discrimination were also analysed. The statistical analysis was based on a sample of 24 adult skulls of Bardhoka breed with 12 female and 12 male skulls. Altogether, 31 different measurements were taken morphologically and 7 different indices were applied. Except for the measurement's values of the orbit, measurement's values of length of the cheek tooth row and the measurement's values of height of the foramen magnum, all the measured values of males were higher than females. Nasal index, cranium index and skull index values were statistically significant between both genders. It is envisaged that the findings of this study will motivate and assist other comparative studies with other autochthonous sheep and goat breeds found in the Dukagjini region or in clinical veterinary practice and even in zooarchaeology.