Association between serum and urinary environmental metal levels and major depressive disorder: a study based on logistic regression and quantile regression.

Background: Major depressive disorder (MDD) is a prevalent mental disorder globally. Increasing evidence suggests that Environmental Metal (EM) play a crucial role in MDD. Therefore, this study investigated the roles of barium (Ba), cesium (Cs), nickel (Ni), manganese (Mn), lead (Pb), mercury (Hg), cadmium (Cd), and tin (Sn) in the etiology of MDD. Methods: The study included 72 MDD patients and 75 healthy controls (HCs) from the Second People's Hospital of Zhumadian, China. Inductively coupled plasma mass spectrometer (ICP-MS) measured the metal levels in serum and urine samples from both groups. Results: Significant differences in serum and urine levels of EMs were observed between MDD patients and HCs. After adjusting for age, gender, and BMI, logistic regression and quantile regression models revealed significant associations between EMs and MDD. In serum samples, higher Sn levels (OR = 1.22, p = 0.044) increased MDD risk, whereas higher Cs levels (OR = 0.02, p < 0.001), Cd (OR = 0.06, p = 0.047), and Mn (OR = 0.54, p = 0.016) decreased MDD risk. In urine samples, higher Ba levels (OR = 0.94, p = 0.015), Ni (OR = 0.87, p = 0.0024), Sn (OR = 1.62, p < 0.001), and Mn (OR = 0.77, p = 0.037) were significantly associated with MDD. Sn significantly positively predicted HAMD-24 scores at the 0.50 and 0.75 quantiles (ß = 0.96, p = 0.018; ß = 1.25, p = 0.008) as did Pb (ß = 5.15, p = 0.001; ß = 4.19, p = 0.004). Ba positively predicted depressive symptoms across all quantiles (all p < 0.05). Hg positively predicted HAMD-24 scores at the 0.50 quantile (ß = 9.20, p = 0.050). Conclusion: These findings underscore EMs' importance in depression, aiding in targeted interventions for varying degrees of depression and necessitating future studies to clarify causality and mechanisms.

Metal element-fusion peptide heterostructured nanocoatings endow polyetheretherketone implants with robust anti-bacterial activities and in vivo osseointegration.

Polyetheretherketone (PEEK), renowned for its exceptional mechanical properties and bio-stability, is considered a promising alternative to traditional metal-based implants. However, the inferior bactericidal activity and the limited angiogenic and osteogenic properties of PEEK remain the three major obstacles to osseointegration in vivo. To overcome these obstacles, in this work, a versatile heterostructured nanocoating was conceived and equipped on PEEK. This nanocoating was designed to endow PEEK with the ability of photo-activated pathogen disinfection, along with enhanced angiogenesis and osteogenesis, effectively addressing the triple-barrier challenge towards osseointegration. The crafted nanocoating, encompassing diverse nutritional metal elements (Fe3+, Mg2+, and Sr2+) and a fusion peptide adept at promoting angiogenesis and osteogenesis, was seamlessly decorated onto PEEK. The engineered implant exhibited an antibacterial activity of over 94% upon near-infrared illumination by virtue of the photothermal conversion of the polyphenol nanocoating. Simultaneously, the decorated hierarchical nanocoatings synergistically promoted cellular adhesion and proliferation and up-regulated angiogenesis-/osteogenesis-associated cytokine expression in endothelial/osteoblast cells, resulting in superior angiogenic differentiation and osteoinductive capability in vitro. Moreover, an in vivo assay in a rabbit femoral defect model revealed that the decorated implant can achieve ameliorative osseointegrative fixation. Collectively, this work offers a practical and instructive clinical strategy to address the triple-barrier challenge associated with PEEK-based implants.

Engineered Probiotic Bio-Heterojunction with Robust Antibiofilm Modality via "Eating" Extracellular Polymeric Substances for Wound Regeneration.

The compact three-dimensional (3D) structure of extracellular polymeric substances (EPS) within biofilms significantly hinders the penetration of antimicrobial agents, making biofilm eradication challenging and resulting in persistent biofilm-associated infections. To address this challenge, a solution is proposed: a probiotic bio-heterojunction (P-bioHJ) combining Lactobacillus rhamnosus with MXene (Ti3C2) quantum dots (MQDs)/FeS heterojunction. This innovation aims to break down the saccharides in EPS, enabling effective combat against biofilm-associated infections. Initially, the P-bioHJ targets saccharides through metabolic processes, causing the collapse of EPS and allowing infiltration into bacterial colonies. Simultaneously, upon exposure to near-infrared (NIR) irradiation, the P-bioHJ produces reactive oxygen species (ROS) and thermal energy, deploying physical mechanisms to combat bacterial biofilms effectively. Following antibiofilm treatment, the P-bioHJ adjusts the oxidative environment, reduces wound inflammation by scavenging ROS, boosts antioxidant enzyme activity, and mitigates the NF-κB inflammatory pathway, thereby accelerating wound healing. In vitro and in vivo experiments confirm the exceptional antibiofilm, antioxidant/anti-inflammatory, and wound-regeneration properties of P-bioHJ. In conclusion, this study provides a promising approach for treating biofilm-related infections.

The impact of magnesium on shivering incidence in cardiac surgery patients: A systematic review.

Background and objective: This scientific review involves a sequential analysis of randomized trial research focused on the incidence of shivering in patients undergoing cardiac surgery. The study conducted a comprehensive search of different databases, up to the end of 2020. Only randomized trials comparing magnesium administration with either placebo or no treatment in patients expected to experience shivering were included. The primary objective was to evaluate shivering occurrence, distinguishing between patients receiving general anesthesia and those not. Secondary outcomes included serum magnesium concentrations, intubation time, post-anesthesia care unit stay, hospitalization duration, and side effects. Data collection included patient demographics and various factors related to magnesium administration. Material and methods: This scientific review analyzed 64 clinical trials meeting inclusion criteria, encompassing a total of 4303 patients. Magnesium was administered via different routes, primarily intravenous, epidural, and intraperitoneal, and compared against placebo or control. Data included demographics, magnesium dosage, administration method, and outcomes. Heterogeneity was assessed using the I2 statistic. Some studies were excluded due to unavailability of data or non-responsiveness from authors. Result: and discussion: Out of 2546 initially identified articles, 64 trials were selected for analysis. IV magnesium effectively reduced shivering, with epidural and intraperitoneal routes showing even greater efficacy. IV magnesium demonstrated cost-effectiveness and a favorable safety profile, not increasing adverse effects. The exact dose-response relationship of magnesium remains unclear. The results also indicated no significant impact on sedation, extubation time, or gastrointestinal distress. However, further research is needed to determine the optimal magnesium dose and to explore its potential effects on blood pressure and heart rate, particularly regarding pruritus prevention. Conclusion: This study highlights the efficacy of intravenous (IV) magnesium in preventing shivering after cardiac surgery. Both epidural and intraperitoneal routes have shown promising results. The safety profile of magnesium administration appears favorable, as it reduces the incidence of shivering without significantly increasing costs. However, further investigation is required to establish the ideal magnesium dosage and explore its potential effects on blood pressure, heart rate, and pruritus prevention, especially in various patient groups.

Preparation of strong, UV-blocking and sustainable glucose-cross-linked cellulose plastics via hydroxyl-yne click reaction.

The construction of functional cellulose plastics possessing strong UV-blocking, hydrophilicity, and biodegradability is challenging. Therefore, we provide a novel strategy to successfully prepare sustainable and hydrophilic glucose-cross-linked cellulose (GC) plastics showing effective UV-blocking and excellent mechanical properties via hydroxyl-yne click reaction at room temperature. The results demonstrated that hydroxyl-yne click chemistry enabled efficient crosslinking of cellulose with glucose using 4-dimethylamino pyridine (DMAP) as a catalyst. Moreover, the DMAP residue imparted good UV-shielding properties to GC films exhibiting nearly 100 % UVC (200-275 nm) and 100 % UVB (320-275 nm) shielding ratios. The introduction of glucose imparted superior hydrophilicity (water contact angle of 40.3-43.2°) and improved water adsorption. Additionally, the mechanical properties of the GC films increased with the increasing crosslinking density, and the highest tensile stress was 94 MPa. The water-induced breaking and hydrogen bond reforming strategy led to a stress of 127 MPa and a strain of 25.6 % for the final GC2 film, which were excellent compared to those of the most reported cellulose films. Additionally, GC films were biosafe, exhibited improved oxygen barrier, and good biodegradability. Hence, this study provides a promising and efficient approach for preparing high-performance cellulose plastics.

The association between problematic internet use and social anxiety within adolescents and young adults: a systematic review and meta-analysis.

Objective: Although numerous studies have investigated the association between problematic internet use (PIU) and social anxiety, the findings have no yet reached consistent. The present meta-analysis aims to examine the association between PIU and social anxiety within adolescents and young adults (age range: 14-24 years old). Method: The meta-analysis systematically retrieved the studies prior to September 7, 2023 from Web of Science, PubMed, PsycINFO, Scopus, CNKI, and CQVIP. The meta-analysis based on random-effects model to conduct the research. Stata Version 17.0 and JASP 16.3.0 was used to analysis. Results: The meta-analysis ultimately included 37 studies (37 effect sizes in total), involving a total of 36,013 subjects. Our findings indicated that the overall correlation between PIU and social anxiety was significant positive [r = 0.333, 95% CI (0.292, 0.373), p < 0.001]. Their association was significantly moderated by publication year, measurement tools for PIU and social anxiety but not significantly by culture context, developmental level and gender. Conclusion: This meta-analysis suggests that social anxiety is a predictor of the development of PIU in adolescents and young adults. Furthermore, the study also finds the possibility that contemporary adolescents and youth may exhibit a more "global" behavior pattern, potentially emphasizing fewer differences between cultures, generations and genders.

Simulated and Verification of Mass and Heat Transfer Coupled Model of Jujube Slices Dried by Hot Air Combined with Radio Frequency Heat Treatment at Different Drying Stages.

This study investigates the impact of radio frequency (RF) heat treatment on heat and mass transfer during the hot air drying of jujube slices. Experiments were conducted at different drying stages, comparing single-hot air drying with hot air combined with RF treatment. Numerical models using COMSOL Multiphysics® were developed to simulate the process, and the results were compared to validate the models. The maximum difference between the simulated value of the center temperature and the experimental value was 6.9 °C, while the minimum difference was 0.1 °C. The maximum difference in average surface temperature was 1.7 °C, with a minimum of 0.3 °C. The determination coefficient (R2) between the simulated experimental values of HA and the early (E-HA + RF), middle (M-HA + RF), and later (L-HA + RF) groups was 0.964, 0.987, 0.961, and 0.977, respectively. The study demonstrates that RF treatment reduces drying time, enhances internal temperature, promotes consistent heat and mass transfer, and accelerates moisture diffusion in jujube slices. Furthermore, the later the RF treatment is applied, the greater the increase in internal temperature and the faster the decrease in moisture content. This research elucidates the mechanism by which RF heat treatment influences heat transfer in hot air-dried jujube slices.

Isocyanate Additives Improve the Low-Temperature Performance of LiNi0.8Mn0.1Co0.1O2||SiOx@Graphite Lithium-Ion Batteries.

LiNi0.8Mn0.1Co0.1O2||SiOx@graphite (NCM811||SiOx@G)-based lithium-ion batteries (LIBs) exhibit high energy density and have found wide applications in various fields, including electric vehicles. Nonetheless, its low-temperature performance remains a challenge. One of the most efficacious strategies to enhance the low-temperature functionality of battery is the development of appropriate electrolytes with low-temperature suitability. Herein, p-tolyl isocyanate (PTI) and 4-fluorophenyl isocyanate (4-FI) are used as additive substances to integrate into the electrolytes to improve the low-temperature performance of the battery. Theoretical calculations and experimental results indicate that PTI and 4-FI can both preferentially generate a stable SEI on the electrode surface, which is beneficial to reduce the interfacial impedance. As a result, the additive, i.e. 4-FI, is superior to PTI in improving the low-temperature performance of the battery due to the optimization of F in the SEI membrane components. At room temperature, the cyclic stability of the NCM811/SiOx@G pouch cell increases from 92.5% (without additive) to 94.2% (with 1% 4-FI) after 200 cycles at 0.5 C. Under the operating temperature of -20 °C, the cyclic stability of the NCM811/SiOx@G pouch cell increases from 83.2% (without additive) to 88.6% (with 1% 4-FI) after 100 cycles at 0.33 C. Therefore, a rational interphase design involving the modification of the additive structure is a cost-effective way to improve the performance of LIBs.

A strategy to prepare internally-plasticized poly(vinyl chloride) by grafting castor oil onto the PVC chain with three different isocyanates as intermediate bridges.

In this work, three types of internally-plasticized poly(vinyl chloride) materials (PVC-H-C, PVC-TH-C, PVC-IP-C) were prepared by grafting castor oil onto the PVC chain with three different isocyanates as intermediate bridges, respectively. The three different isocyanates were hexamethylene diisocyanate (HDI), trimer of HDI (THDI), and isophorone diisocyanate (IPDI). This method does not need any castor oil pretreatment. The effects of different isocyanates on the plasticizing ability of the internally-plasticized PVC and the thermal stability of the whole material were discussed. The grafting of castor oil onto PVC with hexamethylene diisocyanate (HDI) as the intermediate bridge has the best plasticizing effect among the three types of internally-plasticized poly(vinyl chloride) materials, as the elongation at break reaches 294%, and the glass transition temperature is lower than that of pure PVC from 75 to 58 °C. It is worth mentioning that the thermal stability is optimized when HDI trimer (THDI) is used as the intermediate bridge, which may be related to the triazine ring contained in THDI. Moreover, this PVC material (PVC-TH-C) also has higher decomposition activation energy when the mass loss is 40% and releases less HCl and benzene gas during thermal degradation. The three types of internally-plasticized PVC all show excellent migration resistance, and almost do not migrate in the petroleum ether environment.

Self-Plasticized PVC Prepared by Introducing Fatty Acid to the PVC with Triglycidyl Isocyanurate as an Intermediate Bridge.

The phthalate-free self-plasticization of poly(vinyl chloride) (PVC) conforms to the concept of green chemistry. In this work, phthalate-free, biocontaining, self-plasticized PVC with nonmigration (4-an-TG-X-PVC; X = R, P, or O) was prepared by covalent attachment of ricinoleic acid, palmitic acid, and oleic acid, respectively, to the PVC matrix with 4-aminothiophenol and triglycidyl isocyanurate (TGIC) as intermediate bridges. 4-Aminothiophenol and TGIC acted as the nucleophilic reagent and the thermally stable substance, respectively. The 4-an-TG-X-PVC was observed by diverse characterization methods. Specifically, Fourier transform infrared spectra, 1H nuclear magnetic resonance, gel permeation chromatography, and migration stability tests proved the successful synthesis of 4-an-TG-X-PVC. Compared to the neat PVC, the mechanical property of 4-an-TG-X-PVC is better. The glass transition temperature (T g) of PVC is 81.24 °C, while that of 4-an-TG-X-PVC decreased to 41.88, 31.49, and 46.91 °C. The 4-an-TG-X-PVC showed higher elongation at break and lower tensile strength than neat PVC. Simultaneously, the thermal property of 4-an-TG-X-PVC got a boost. Thermogravimetry-infrared and thermogravimetry-mass spectrometry showed that 4-an-TG-X-PVC released less HCl than neat PVC in a thermal environment. Discoloration experiments demonstrated that 4-an-TG-P-PVC had better heat stabilization and better color than 4-an-TG-O-PVC and 4-an-TG-R-PVC. This work provides a viable solution to the dependence on phthalates, reduced human health and ecological risks, and endowed PVC with improved thermal stability and nonmigration performance.

Microstructure Analysis and Quality Evaluation of Jujube Slices Dried by Hot Air Combined with Radio Frequency Heat Treatment at Different Drying Stages.

Jujubes have been favored by consumers because of their rich nutrition and wide use. Hot air drying has been commercially and typically used to prolong shelf life and acquire the dried produce. Jujube slices were dried with hot air combined with radio frequency (RF) at different drying stages, namely, early (0-2 h, E-HA + RF), middle (2-4 h, M-HA + RF), later (4-6 h, L-HA + RF), and whole (0-6 h, W-HA + RF) stages. This study aimed to investigate the effects of different RF application stages on the microstructure, moisture absorption rate, color, and ascorbic acid of jujube slices. Compared with the hot air drying (HA) group, the E-HA + RF group obtained the best results among the experimental groups because it reduced the cells with a roundness of less than 0.4 by 5%. Moreover, the M-HA + RF group showed better results than those of other groups, with an 18.6% and 48.8% reduction in cells for a cross-sectional area less than 200 µm2 and a perimeter less than 25 µm, respectively. The minimum total color difference (ΔE = 9.21 ± 0.31) and maximum retention of ascorbic acid (285.06 mg/100 g) were also observed in this group. Therefore, the method of hot air drying assisted by phased RF is viable in the drying industry to improve the quality of dried agricultural products and reduce energy consumption.

Facile Synthesis of Carbon Dots from Biomass Material and Multi-Purpose Applications.

Selective and sensitive water content measurement in organic solvents is extremely significant for both industrial use and laboratory preparation. Carbon nanodots are promising carbon nanomaterials with unique and novel properties and thus have drawn growing attention. However, the hydrothermal approach for the preparation of carbon dots always uses water as solvent, and consequently, the development of carbon dots from biomass materials for fluorescence detection of water content remains unexplored. Here, carbon dots were prepared from gallic acid via a cheap and facile one-step method. The as-prepared carbon dots present excellent sensitivity and selectivity toward water content and exhibits good linear relationships with water content in range of 0-10%. The carbon dots demonstrated a strong antioxidation capacity and colour-reaction of Fe3+ like gallic acid. The carbon dots also showed solid-state lighting.

Design and Preparation Technology of Single/Dual-Cross-Linking Copolymers Based on Swida wilsoniana Oil.

To fully utilize the forestry bioresources, a novel dual-cross-linkable resin monomer of MAHSWAGMA was prepared from Swida wilsoniana oil (SWO). FT-IR and 1H-NMR analysis demonstrated the successful synthesis of the target product. Five different cross-linking copolymers, including a polymerized vinyl ester/single-cross-linking (PVESC) polymer, a polymerized epoxy/single-cross-linking (PESC) copolymer, a thermal-photo-initiated/dual-cross-linking (TPIDC) copolymer, a photo-thermal-initiated/dual-cross-linking copolymer (PTIDC), and a thermal-initiated/dual-cross-linking copolymer (TIDC), were obtained with different preparation technologies by different initiated cross-linking processes. Thermal and mechanical properties of the five copolymers were all tested, and the effects of different preparation technologies on the properties of prepared copolymers were investigated. The prepared three dual-cross-linking copolymers had higher hardness, relative cross-linking density, glass transition temperature, and more excellent mechanical property than the other two single-cross-linking copolymers. The PTIDC copolymerized system obtained with photo first and thermal latter initiated dual-cross-linking preparation technology had the most excellent comprehensive properties. This study can provide an ideal idea for the design and preparation of dual-cross-linking copolymers based on forestry vegetable oil.

Development and validation of a nomogram for further decision of radical surgery in pT1 colorectal cancer after local resection.

PURPOSE: The aim of this study was to develop and validate a nomogram to assist physicians making further decisions on the requirement of a radical surgery for T1 colorectal cancer (CRC) after local excision through preoperative prediction of lymph node metastasis (LNM). METHODS: A total of 141 T1 CRC patients were enrolled from January 2013 to August 2020. The independent predictive parameters were determined in multivariate analyses. The nomogram was constructed based on predictors of LNM and its performance was evaluated with respect to its calibration, discrimination, and decision curve analysis. Internal validation by bootstrapping was performed to verify the applicability of the nomogram. RESULTS: cN in CT/MRI (N+), histologic type (poorly differentiated, mucinous adenocarcinoma, and signet-ring cell carcinoma), tumor budding (G3), and lymphovascular invasion were identified in the multivariable analysis (p<0.05). The developed nomogram incorporated these four predictors and it yielded good discrimination and calibration, with an area under the curve (AUC) of 0.89 (95% confidence interval [CI]: 0.80-0.97). However, the Japanese guideline yielded an AUC of 0.75 (95% CI: 0.63-0.87). A decision curve analysis showed that the predictive scoring system had a high clinical application value, and the nomogram conferred a greater benefit than the Japanese guideline did (range of threshold within 10%-80%). CONCLUSIONS: This study proposed a novel predictive model to assist physicians in making treatment decisions regarding additional surgery after local excision.

Preparation and Properties of Self-Healing Polyurethane Elastomer Derived from Tung-Oil-Based Polyphenol.

A tung-oil-based polyphenol (ATOM), containing the phenolic hydroxyl group, was synthesized from tung oil and 4-maleimidophenol by the Diels-Alder addition reaction. Then self-healing thermosetting polyurethanes were prepared from ATOM and the polyurethane prepolymer. The chemical structure and cross-link network were confirmed by Fourier transform infrared spectroscopy (FTIR) and swelling tests. The products partially dissolved in trichlorobenzene when the temperature rose to 110 °C. Temperature-variable FTIR confirmed that the phenolic urethane starts to partially dissolve at 100 °C, which can be explained by the experimental phenomenon in swelling tests. Tensile property analysis showed that the broken and healed thermosets maintained about 46-64% of their original tensile strengths and 81-88% of their original elongations at break, respectively.

LncRNA MALAT1 promotes neuropathic pain progression through the miR­154­5p/AQP9 axis in CCI rat models.

The present study investigated the role and molecular mechanism of long non­coding RNA (lncRNA) metastasis associated lung adenocarcinoma transcript (MALAT)1 in neuropathic pain in rat chronic constriction injury (CCI) model. Reverse transcription­quantitative PCR and western blot analysis were used to detect the expression levels of MALAT1, microRNA (miR)­154­5p and aquaporin (AQP)9 in spinal cord tissue and microglia of CCI rats. ELISA and pain behavioral assays were used to observe the effect of MALAT1 on neuropathic pain and neuroinflammation in model rats, and to verify its molecular mechanism through bioinformatics and luciferase experiments. The results of the present study identified that the expression levels of MALAT1 and AQP9 were upregulated, while miR­154­5p was downregulated in spinal cord tissue and microglia of CCI rats. MALAT1 knockdown in CCI model rats significantly induced the occurrence of neuropathic pain, while the upregulation of miR­154­5p could reverse this process. The present study also identified that miR­154­5p was the target gene of MALAT1, and AQP9 was the target gene of miR­154­5p. AQP9 knockdown promoted the occurrence of neuropathic pain. In conclusion, lncRNA MALAT1 promotes the progression of neuropathic pain in rats by reducing miR­154­5p and increasing AQP9. The MALAT1/miR­154­5p/AQP9 axis can be used as a new therapeutic target for neuropathic pain.

Continuous Collision Detection for Virtual Proxy Haptic Rendering of Deformable Triangular Mesh Models.

Most haptic systems suffer from what is known as the "tunneling" problem, which arises when a virtual object moves or deforms largely towards a small virtual tool. This problem occurs because the displacement of the virtual object is not considered during collision detection and can be solved with Continuous Collision Detection (CCD). Originally, haptic rendering with CCD was proposed for applications with 6 Degrees-of-Freedom (DoF) only. However, 3-DoF is simple to use in, and sufficient for, many applications. In this paper, we focus on CCD with a 3-DoF point-object haptic rendering of dynamic and deformable objects. Since we use the virtual proxy method, we propose a triangle-proxy CCD approach with a complementary process called Proxy Pop-Out to solve this problem. The results show that we are able to solve the "tunneling" problem, even for a small proxy against thin and deformable objects with large motions. In addition, we present probing haptic interactions with deformable objects in a multi-rate haptic rendering system. By using Oriented Particles and Position Based Dynamics, our system is efficient and stable.

Preparation and Properties of Polyether Aliphatic Polymerized Amide as a Vegetable Oil-Based Epoxy Curing Agent.

An epoxy curing agent polyether aliphatic polymerized amide (PEAPA) was synthesized using epoxy fatty acid methyl ester and diethylenetriamine. The Fourier transform infrared spectra and 1H NMR analysis indicated successful synthesis of PEAPA. Gel permeation chromatography showed a high degree of polymerization. The obtained PEAPA was used to cure E51 epoxy resin and partially replace rigid 1,3-cyclohexanediamine curing agent. A series of epoxy resins with varying rigidities were prepared. The mechanical and thermal properties of the materials were analyzed. Mechanical property tests showed that the tensile strength and hardness of the materials decreased gradually with increased PEAPA content. However, elongation at breaks of the prepared materials increased with increased PEAPA content. Micromorphological investigation indicated excellent compatibility between PEAPA and the curing system. Furthermore, a dynamic mechanical thermal analysis demonstrated that the glass transition temperature of the epoxy resin decreased with increased PEAPA content. Thermal stability, while still excellent, decreased slightly with the addition of PEAPA. At the primary weight loss stage, initial decomposition temperatures for all resins were above 330 °C.

Synthesis of green fluorescent carbon materials using byproducts of the sulfite-pulping procedure residue for live cell imaging and Ag+ ion determination.

A simple synthesis strategy was designed and applied to synthesize nitrogen and sulfur co-doped aminated ligninsulfonate/graphene quantum dots (ASL/GQDs) composites using citric acid monohydrate and byproducts of the sulfite-pulping procedure (sodium lignosulfonate). The combination of these two materials improves surface chemical activities and electronic characteristics. As a result，the combination offers excellent photoluminescence properties and sensitivity. The fluorescence intensity of the as-prepared ASL/GQDs composites is more than three times that of the free GQDs. ASL/GQDs based fluorescent probe was applied to sensitively determine Ag+ with a good linearity in a range from 0.005 to 500 µM with a correlation coefficient of 0.99. The method was also used successfully to determine the amount of Ag+ in environmental water samples. Using an MTT assay, the ASL/GQDs have low toxicity and are biocompatible with A549 cells, and may be successfully used to image A549 cells.

Polyelectrolyte-protected Dual-color-quantum-dot Assembled Silica Nanoparticles and Their Application in Simultaneous Fluorescence Determination of e Antigen and Surface Antigen of Hepatitis B.

Cationic poly-diallyldimethylammonium (PDADMAC), green CdTe quantum dots (QDs) or red CdS coated CdTe QDs, and anionic polyacrylic acid (PAA) were respectively assembled on the nano-carrier SiO2 to prepare green fluorescence composite nanoparticles (GF-QDs) and red ones (RF-QDs) with the structure SiO2/PDADMAC/QD/PDADMAC/PAA. The sandwich structure "PDADMAC/QD/PDADMAC" on the nano-carrier not only realized the protection to fluorescence of QDs but also avoided the fluorescence shielding of silica shell for the assembled QDs. In 7 days, the diluent solutions of GF-QD and RF-QD all have a very stable fluorescence. On the contrary, the fluorescence of diluent solutions of red and green QDs reduced by 75.99 and 94.35%, respectively. Indeed, they have not fluorescent shielding and have a very slight fluorescent enhancement. Based on GF-QD and RF-QD, the simultaneous determination of Hepatitis B e antigen and surface antigen has been established. Their determination in buffer and plasma all showed good precision and accuracy.