Quantification of natural rubber blends by reflection/reflectance infrared and confocal Raman spectroscopy: a comparison of statistical methods.

The blend of butadiene and acrylonitrile copolymer (NBR) with natural poly-cis-isoprene (NR) shows increased resistance to swelling in solvents in comparison to the individual components. In aerospace, NBR rubber is used as thermal protection for rockets and shall not contain other polymers, even in low contents, otherwise, it can affect the protection performance and rocket safety by causing detachment of the elastomer/propellant interface; therefore, this investigation presents methodologies to determine the NR/NBR contents. This study explores different analytical techniques, such as Raman spectroscopy and Fourier transform infrared (FTIR) spectroscopy, in the mid-infrared (MIR) by reflection and in the near-infrared by reflectance (NIRA) modes, Furthermore, quantification strategies by univariate, bivariate and multivariate (chemometric) models are evaluated and compared. A proposed methodology, based on multivariate Raman microscopy with partial least squares regression (PLS), showed high linearity (R2 > 0.99) and low error (< 0.82 %). The validation of FT-MIR data for the CH3, which presented lower error (1.3%) than vinylidene band (6%), showed that both methodologies (reflection and NIRA reflectance) can be used for the quantification of NR in NR/NBR. These results constitute a contribution to the state of the art in researching industrial and aerospace elastomeric applications.

Infrared reflectance techniques applied to silica particles diameter determination - theoretical and experimental data.

Silica is a versatile material employed in different applications fields including aerospace, especially for rocket engines thermal protections. It is known that particles diameter causes variations in the material properties, and the best-known methods for diameter determination in general consist of several steps in sample preparation such as drying, sieving and the determination of the refractive index according different methods. On the other hand, Fourier transform infrared spectroscopy techniques (FT-IR), in reflectance mode, related to the particle size, are less used for this type of determination. Moreover, methodologies in the near infrared region (NIR) are even less explored. Therefore, the aim of this paper is to present a FTIR methodology for diffuse reflectance (DRIFT) in the middle infrared region (MIR) and reflectance analysis in near infrared region (NIRA) for the determination of the particle diameter on silica samples. Both methodologies showed good results. As proven by a test sample analysis, NIRA methodology indicated better precision. Furthermore, considering small and intermediated particle sizes, a tendency towards smaller errors for the absorbance measurements of the samples was found, consistently with the available literature results.

Qualitative and quantitative evaluation of epoxy systems by Fourier transform infrared spectroscopy and the flexibilizing effect of mercaptans.

Epoxy systems are widely applied as adhesives in the aerospace industry. They have excellent adhesion properties, however, being thermosetting, epoxy systems show fracture brittleness characteristics. Polysulfide and polymercaptans are good options to increase the flexibility of the epoxy adhesive. Thermal analysis techniques are generally used to evaluate the curing degree of epoxy systems. In most cases, when infrared (IR) analysis is used, it is employed qualitatively. This paper presents the reaction study of a DGEBA epoxy prepolymer with diethylenetriamine (DETA) and linear and branched dodecyl mercaptans as flexibilizers. Conversion data and curing time were assessed qualitatively and quantitatively by Fourier Transform Infrared Spectroscopy (FT-IR) in the medium infrared region (MIR) and in the near infrared region, using near infrared reflectance accessory (NIRA). NIRA methodology showed satisfactory results, with errors between 3 and 7%, especially in samples with lower amine contents. Mechanical tests confirmed the flexibilization of the cured epoxy system by the addition of mercaptans, indicating a lower crosslinking degree in the matrix. Young's modulus (E) significantly decreased from 2017 MPa to 578 MPa with the addition of approximately 20 wt% of normal dodecyl mercaptan to the epoxy system.

How much medication is delivered in a novel drug delivery technique that uses a tattoo machine?

BACKGROUND: Even though dermatologists often perform drug delivery procedures, it is necessary to assess their safety. OBJECTIVE: Quantify the amount of medication delivered using the MMP drug delivery technique and outline other safety parameters. METHODS: Using a simple and novel technique, we attempted to quantify the amount of medication delivered by weighing human skin samples before and after delivery. RESULTS: In drug delivery done on human skin using a liquid with a density of 1,271,460 µg/ml (the values expressed in this manuscript are in µg), a needling density of 570 perforations/cm2 , and a needling depth of 300 microns, we estimate that 1,175 µg/cm2 were delivered (standard deviation 601 µg/cm2 , standard error 190 µg/cm2 ). LIMITATIONS: This result is only applicable to the protocol proposed in this study for the MMP drug delivery technique. CONCLUSION: The MMP drug delivery technique injects small amounts of medication (1,175 µg/cm2 ) homogeneously into the dermis.

Expanded perlite/cork fillers applied to aerospace insulation materials.

Insulations for rocket motors such as Flexible Thermal Protections (FTPs) and Rigid Thermal Protection (RTPs) act as thermal barriers against the hyperthermal environment from the solid propellant combustion. FTPs present dual function: to extend RTPs performance, and to attenuate the propellant contraction. FTPs used in the Brazilian Space Program have asbestos in their composition since the 70´s; however, they are hazardous for human health. In this context, a mixture of Expanded Perlite (PExp) and Cork Powder (CP) was investigated as a replacement for asbestos. Results showed reduction about 21 % in density and an increase of 13 % in the ablative properties. The low mechanical properties not interfere in this type of FTP due to your function of attenuate the propellant contraction.