RESUMEN
Solid electrolytes may be the answer to overcome many obstacles in developing the next generation of renewable batteries. A novel composite solid electrolyte (CSE) composed of a poly(vinylidene fluoride) (PVDF) base with an active nanofiber filler of aluminum-doped garnet Li ceramic, Li salt lithium bis-(trifluoromethanesulfonyl)imide (LiTFSI), Li fluoride (LiF) stabilizing additive, and plasticizer sulfolane was fabricated. In a Li|CSE|LFP cell with this CSE, a high capacity of 168 mAh g-1 with a retention of 98% after 200 cycles was obtained, representing the best performance to date of a solid electrolyte with a PVDF base and a garnet inorganic filler. In a Li metal cell with Si and Li, it yielded a discharge capacity of 2867 mAh g-1 and was cycled 60 times at a current density of 100 mAh g-1, a significant step forward in utilizing a solid electrolyte of any kind with the desirable Si anode. In producing this CSE, the components and fabrication process were chosen to have a lower cost and improved safety and environmental impact compared with the current state-of-the-art Li-ion battery.
RESUMEN
Polymer cover windows are important components of flexible OLED displays but they easily generate wrinkles because of their weak folding resistance. Increasing the polymer thickness can improve the folding resistance but it decreases the touch sensitivity. Thus, fabricating highly foldable and supersensitive polymer cover windows is still challenging. Here, by incorporating cellulose nanocrystals (CNCs) and zirconia (ZrO2) into colorless polyimide (CPI), we developed a highly foldable and supersensitive hybrid cover window. Inspired by the theory of elasticity, we added rigid CNCs into CPI to improve the elastic modulus and hence the foldability. ZrO2 was introduced to improve dielectric properties, which leads to improved touch sensitivity. After these modifications, the elastic modulus of the cover windows was increased from 1432 to 2221 MPa, whereas its dielectric constant was increased from 2.95 to 3.46 (@1 × 106 Hz), resulting in significantly enhanced foldability and sensitivity. Meanwhile, because of the nano size of CNCs and ZrO2, the hybrid cover windows exhibit excellent optical properties with the transmittance of â¼88.1%@550 nm and haze of 2.39%. With improved and balanced mechanical, dielectric, and optical properties, these hybrid cover windows overcome current cover windows' defects and could be widely used in next-generation flexible displays.
RESUMEN
As a natural antitumor drug, curcumin (CUR) has received increasing attention from researchers and patients due to its various medicinal properties. However, currently CUR is still restricted due to its low and stand-alone therapeutic effects that seriously limit its clinical application. Here, by using cellulose nanocrystals (CNCs) as a nanocarrier to load CUR and AuNPs simultaneously, we developed a hybrid nanoparticle as a codrug delivery system to enhance the low and stand-alone therapeutic effects of CUR. Aided with the encapsulation of ß-cyclodextrin (ßCD), both the solubility and the stability of CUR are greatly enhanced (solubility increased from 0.89 to 131.7 µg/mL). Owing to the unique rod-like morphology of CNCs, the system exhibits an outstanding loading capacity of 31.4 µg/mg. Under the heat effects of coloaded AuNPs, the system demonstrates a high release rate of 77.63%. Finally, with CNC as a bridge nanocarrier, all aforementioned functions were integrated into one hybrid nanoparticle. The all-in-one integration ensures CUR to have enhanced therapeutic effects and enables the delivery system to exhibit combined chemo-photothermal therapy outcomes. This work presents a significant step toward CUR's clinical application and provides a new strategy for effective and integrative treatment of tumor disease.
Asunto(s)
Curcumina , Nanopartículas del Metal , Nanopartículas , Curcumina/química , Portadores de Fármacos/química , Oro/química , Humanos , Nanopartículas/química , Terapia FototérmicaRESUMEN
Aqueous zinc-ion batteries (ZIBs) are one of the most ideal candidates for grid-scale energy storage applications due to their excellent price and safety advantages. However, formation of Zn dendrites and continuous side reactions during cycling result in serious instability problems for ZIBs. In this work, the authors develop a facile and versatile plasma-induced nitrogen-doped Zn (N-Zn) foil for dendrite-free Zn metal anode. Benefitting from the uniform nucleation sites and enhanced surface kinetics, the N-Zn anode exhibits exceptionally low overpotential (around 23 mV) at 1 mA cm-2 and can be cycled for over 3000 h under 1 mA cm-2 because of the enhanced interface behavior. The potential application of N-Zn anode is also confirmed by introducing a full Zn/MnO2 battery with outstanding capacity stability for 2000 cycles at 1 A g-1 . Overall, this work offers new fundamental insights into homogenizing Zn electrodeposition processes by pre-introduced active nucleation sites and provides a novel direction of interface design engineering for ultra-stable Zn metal anode.
RESUMEN
Flexible touch screen panel (f-TSP) has been emerging recently and metallic nanowire transparent conductive electrodes (TCEs) are its key components. However, most metallic nanowire (MNW) TCEs suffer from weak bonding strength between metal nanowire electrode layers and polymer substrates, which causes delamination of TCEs and produces serious declines in durability of f-TSPs. Here, we introduce AgS bonding and develop tough and strong electrode-substrate bonded MNW TCEs, which can enhance durability of f-TSPs significantly. We used silver nanowires (AgNWs) as metal conductive electrode and thiol-modified nanofibrillated cellulose (NFC-HS) nanopaper as substrates. Because of the existence of Ag from AgNWs and S from NFC-HS, strong AgS bonding was generated and tough TCEs were obtained. The TCEs exhibit excellent electrical stability, outstanding optical and electrical properties. The f-TSP devices integrated with the TCEs illustrate striking durability. This technique may provide a promising strategy to produce flexible and tough TCEs for next-generation high-durability f-TSPs.
RESUMEN
Polymer-based thermal insulation films are widely utilized to reduce the influence of solar radiation. However, current thermal insulation films face several challenges from poor thermal insulation performance and severe environmental pollution, which are caused by the non-disintegratability of polymer substrates. Here, cellulose nanofiber (CNF)/antimony tin oxide (ATO) hybrid films with and without polyvinyl alcohol (PVA) are presented and they can be used as window thermal barrier films and personal thermal management textiles. The hybrid films exhibit prominent thermal insulation performance, blocking 91.07% ultraviolet(UV) light, reflecting 95.19% near-infrared(NIR) light, and transmitting 44.89% visible(VIS) light. Meanwhile, the hybrid films demonstrate high thermal stability, high anti-UV aging stability, and robust mechanical properties. Moreover, the used-up hybrid films based on natural cellulose are of high disintegratability and recyclability. Our present work is anticipated to open up a new avenue for the fabrication of next-generation high-performance thermal insulation films with sustainable and environmentally friendly processes.
RESUMEN
Reducing the material size could be an effective approach to enhance the electrochemical performance of porous carbons for supercapacitors. In this work, ultra-fine porous carbon nanofibers are prepared by electrospinning using lignin/ polyvinylpyrrolidone as carbon precursor and zinc nitrate hexahydrate (ZNH) as an additive, followed by pre-oxidation, carbonization, and pickling processes. Assisted by the ZnO template, the pyrolytic product of ZNH, abundant micropores are yielded, leading to the formation of microporous carbon nanofibers with specific surface area (SSA) up to 1363 m2 g-1. The average diameter of the lignin-based ultra-fine porous carbon nanofibers (LUPCFs) is effectively controlled from 209 to 83 nm through adjusting the ZNH content. With good flexibility and self-standing nature, the LUPCFs could be directly cut into electrodes for use in supercapacitors. High accessible surface, enriched surface N/O groups, and reduced fiber diameters endow the LUPCFs-based electrodes with an excellent specific capacitance of 289 F g-1. The reduction of fiber diameters remarkably improves the rate performance of the LUPCFs and leads to a low relaxation time constant of 0.37 s. The high specific capacitance of 162 F g-1 is maintained when the current density is increased from 0.1 to 20 A g-1. Besides, the fabricated LUPCFs show exceptional cycling stability in symmetrical supercapacitors, manifesting a promising application prospect in the next generation of supercapacitors.
RESUMEN
Flexible electronics require its substrate to have adequate thermal stability, but current thermally stable polymer substrates are difficult to be disintegrated and recycled; hence, generate enormous electronic solid waste. Here, a thermally stable and green solvent-disintegrable polymer substrate is developed for flexible electronics to promote their recyclability and reduce solid waste generation. Thanks to the proper design of rigid backbones and rational adjustments of polar and bulky side groups, the polymer substrate exhibits excellent thermal and mechanical properties with thermal decomposition temperature (Td,5% ) of 430 °C, upper operating temperature of over 300 °C, coefficient of thermal expansion of 48 ppm K-1 , tensile strength of 103 MPa, and elastic modulus of 2.49 GPa. Furthermore, the substrate illustrates outstanding optical and dielectric properties with high transmittance of 91% and a low dielectric constant of 2.30. Additionally, it demonstrates remarkable chemical and flame resistance. A proof-of-concept flexible printed circuit device is fabricated with this substrate, which demonstrates outstanding mechanical-electrical stability. Most importantly, the substrate can be quickly disintegrated and recycled with alcohol. With outstanding thermally stable properties, accompanied by excellent recyclability, the substrate is particularly attractive for a wide range of electronics to reduce solid waste generation, and head toward flexible and "green" electronics.
Asunto(s)
Electrónica , Polímeros , Electricidad , Solventes , TemperaturaRESUMEN
For flexible electronics, the substrates play key roles in ensuring their performance. However, most substrates suffer from weak bonding with the conductive ink and need additional aids. Here, inspired by the Ag-S bond theory, a novel cellulose nanopaper substrate is presented to improve the bond strength with the Ag nanoparticle ink through a facile printing method. The substrate is fabricated using thiol-modified nanofibrillated cellulose and exhibits excellent optical properties (â¼85%@550 nm), ultra-small surface roughness (3.47 nm), and high thermal dimensional stability (up to at least 90 °C). Most importantly, it can attract Ag nanoparticles initiatively and bind them firmly, which enable the conductive ink to be printed without using the ink binder and form a strong substrate-ink bonding and maintain a stable conductivity of 2 × 10-4 Ω cm even after extensive peeling and bending. This work may lead to exploring new opportunities to fabricate high-performance flexible electronics using the newly developed nanopaper substrate.
RESUMEN
In this study, a novel anode material of SnS hollow nanofibers (SnS HNFs) was rationally synthesized by a facile process and demonstrated to be a promising anode candidate for sodium-ion batteries. The synergetic effect of unique hollow and porous microstructures of SnS HNFs led to high capacity and ultra-long cycling stability.
RESUMEN
Antimony tin (SnSb) based materials have become increasingly attractive as a potential anode material for sodium-ion batteries (SIBs) owing to their prominent merit of high capacity. However, cyclic stability and rate capability of SnSb anodes are currently hindered by their large volume change during repeated cycling, which results in severe capacity fading. Herein, we introduce carbon-coated centrifugally-spun SnSb@carbon microfiber (CMF) composites as high-performance anodes for SIBs that can maintain their structural stability during repeated charge-discharge cycles. The centrifugal spinning method was performed to fabricate SnSb@CMFs due to its high speed, low cost, and large-scale fabrication features. More importantly, extra carbon coating by chemical vapor deposition (CVD) has been demonstrated as an effective method to improve the capacity retention and Coulombic efficiency of the SnSb@CMF anode. Electrochemical test results indicated that the as-prepared SnSb@CMF@C anode could deliver a large reversible capacity of 798â¯mAâ¯hâg-1 at the 20th cycle as well as a high capacity retention of 86.8% and excellent Coulombic efficiency of 98.1% at the 100th cycle. It is, therefore, demonstrated that SnSb@CMF@C composite is a promising anode material candidate for future high-performance SIBs.
RESUMEN
An innovative nanocarbon network material was synthesized from electrospun kraft lignin and cellulose acetate blend nanofibers after carbonization at 1000 °C in a nitrogen atmosphere, and its electrochemical performance was evaluated as an anode material in sodium-ion batteries. Apart from its unique network architecture, introduced carbon material possesses high oxygen content of 13.26%, wide interplanar spacing of 0.384 nm, and large specific surface area of 540.95 m2·g-1. The electrochemical test results demonstrate that this new nanocarbon network structure delivers a reversible capacity of 340 mA h·g-1 at a current density of 50 mA·g-1 after 200 cycles and exhibits a high rate capacity by delivering a capacity of 103 mA h·g-1 at an increased current density of 400 mA·g-1. The present work rendered an innovative approach for preparing nanocarbon materials for energy-storage applications and could open up new avenues for novel nanocarbon fabrication from green and environmentally friendly raw materials.
RESUMEN
Sodium-ion batteries (SIBs) are promising alternatives to lithium-ion batteries because of the low cost and natural abundance of sodium resources. Nevertheless, low energy density and poor cycling stability of current SIBs unfavorably hinder their practical implementation for the smart power grid and stationary storage applications. Antimony tin (SnSb) is one of the most promising anode materials for next-generation SIBs attributing to its high capacity, high abundance, and low toxicity. However, the practical application of SnSb anodes in SIBs is currently restricted because of their large volume changes during cycling, which result in serious pulverization and loss of electrical contact between the active material and the carbon conductor. Herein, we apply reduced graphene oxide (rGO)-incorporated SnSb@carbon nanofiber (SnSb@rGO@CNF) composite anodes in SIBs that can sustain their structural stability during prolonged charge-discharge cycles. Electrochemical performance results shed light on that the combination of rGO, CNF, and SnSb alloy led to a high-capacity anode (capacity of 490 mAh g-1 at the 10th cycle) with a high capacity retention of 87.2% and a large Coulombic efficiency of 97.9% at the 200th cycle. This work demonstrates that the SnSb@rGO@CNF composite is a potential and attractive anode material for next-generation, high-energy SIBs.
RESUMEN
Biomass-derived porous carbon has been considered as a promising sulfur host material for lithium-sulfur batteries because of its high conductive nature and large porosity. The present study explored biomass-derived porous carbon as polysulfide reservoir to modify the surface of glass fiber (GF) separator. Two different carbons were prepared from Oak Tree fruit shells by carbonization with and without KOH activation. The KOH activated porous carbon (AC) provides a much higher surface area (796â¯m2â¯g-1) than pyrolized carbon (PC) (334â¯m2â¯g-1). The R factor value, calculated from the X-ray diffraction pattern, revealed that the activated porous carbon contains more single-layer sheets with a lower degree of graphitization. Raman spectra also confirmed the presence of sp3-hybridized carbon in the activated carbon structure. The COH functional group was identified through X-ray photoelectron spectroscopy for the polysulfide capture. Simple and straightforward coating of biomass-derived porous carbon onto the GF separator led to an improved electrochemical performance in Li-S cells. The Li-S cell assembled with porous carbon modified GF separator (ACGF) demonstrated an initial capacity of 1324â¯mAhâ¯g-1 at 0.2â¯C, which was 875â¯mAhâ¯g-1 for uncoated GF separator (calculated based on the 2nd cycle). Charge transfer resistance (Rct) values further confirmed the high ionic conductivity nature of porous carbon modified separators. Overall, the biomass-derived activated porous carbon can be considered as a promising alternative material for the polysulfide inhibition in Li-S batteries.
RESUMEN
Sodium resources are inexpensive and abundant, and hence, sodium-ion batteries are promising alternative to lithium-ion batteries. However, lower energy density and poor cycling stability of current sodium-ion batteries prevent their practical implementation for future smart power grid and stationary storage applications. Tin oxides (SnO2) can be potentially used as a high-capacity anode material for future sodium-ion batteries, and they have the advantages of high sodium storage capacity, high abundance, and low toxicity. However, SnO2-based anodes still cannot be used in practical sodium-ion batteries because they experience large volume changes during repetitive charge and discharge cycles. Such large volume changes lead to severe pulverization of the active material and loss of electrical contact between the SnO2 and carbon conductor, which in turn result in rapid capacity loss during cycling. Here, we introduce a new amorphous carbon-coated SnO2-electrodeposited porous carbon nanofiber (PCNF@SnO2@C) composite that not only has high sodium storage capability, but also maintains its structural integrity while ongoing repetitive cycles. Electrochemical results revealed that this SnO2-containing nanofiber composite anode had excellent electrochemical performance including high-capacity (374 mAh g(-1)), good capacity retention (82.7%), and large Coulombic efficiency (98.9% after 100th cycle).
RESUMEN
A self-inhibiting, gradient sulfur structure was designed and developed by the synthesis of a carbon nanofiber-sulphur composite via sulfur vapor deposition method for use as a binder-free sulfur cathode, exhibiting high sulfur loading (2.6 mg cm(-2)) and high sulfur content (65%) with a stable capacity of >700 mA h g(-1).
RESUMEN
Silicon is a promising high capacity (4200 mA h g(-1)) anode material for lithium ion batteries but the significant volume change (over 300%) of silicon during lithiation/delithiation remains a challenge in terms of silicon pulverization and solid-electrolyte-interphase (SEI) accumulation in the silicon composite electrode. To alleviate the volumetric change of silicon, we built a flexible and self-supporting carbon-enhanced carbon nanofiber (CNF) structure with vacant chamber to encapsulate Si nanoparticles (vacant Si@CNF@C). This composite was tested directly without any polymer and current collector. The confined vacant chamber allowed the increasing volume of silicon and SEI accumulates to be well retained for a long cycle life. This chamber-confined silicon-carbon nanofiber composite exhibited an improved performance in terms of good cycling performance (620 mA h g(-1)), high coulombic efficiency (99%), and good capacity retention (80%) after 200 cycles. This self-supported silicon-carbon nanofiber structure showed high flexibility and good electrochemical performance for the potential as flexible electrode for lithium-ion batteries.