UV-barrier poly(lactic acid) film with light-stabilized Eu complexes as filler.

The poor UV shielding property of PLA limit it further applications on food packaging. The rare-earth complex Eu(DBM)3phen converts absorbed ultraviolet (UV) light to red light, which inspires the development of new UV shielding materials. However, this complex has low photostability and decomposes easily under UV irradiation. Thus, we prepared a long-lasting rare-earth complex transluminant Eu(DBM)2(BP-2)phen by introducing BP-2 into Eu(DBM)3phen, and blended it with PLA to obtain PLA/Eu(DBM)2(BP-2)phen composite films. The test results showed that the complex could reduce the UV transmittance of PLA films by emitting luminescence and heat. The UV transmittance of the composite film with 0.5 % mass fraction decreased from 87.4 % to 7.7 %, compared to pure PLA films, and remained at 11.6 % after 12 days of UV aging. The film had long-lasting UV shielding performance, good transparency and mechanical properties. Finally, In the storage experiments of flaxseed oil, the P/E25 film effectively retarded the oxidation process of the oil.

Application of poly(L-lactic acid)-based films for equilibrium modified atmosphere packaging of "Kyoho" grapes and its favorable protection for anthocyanins.

Grapes were packaged by different Poly (L-lactic acid)-based packaging films (PLTL-PLEL) and stored at 5 °C for 35 days to investigate the effects of equilibrium modified atmosphere packaging on the quality of "Kyoho" grapes during storage. Changes in physiochemical quality, antioxidant content and senescence of grapes were studied. Furthermore, UPLC-Q-TOF-MS/MS was used to observe and identify key factors influencing the variation of grape anthocyanins under different atmosphere conditions. Alterations in gas components and enzyme activities significantly impacted anthocyanin levels, highlighting oxygen concentration as the primary influence on total anthocyanin levels. The PLTL-PLEL50 packaging resulted in an approximate 5.7% lower weight loss and increased soluble solids by approximately 14.4%, vitamin C, total phenols and flavonoids reaching 60.2 mg/100 g, 8.4 mg/100 g and 7.2 mg/100 g, respectively. This packaging also preserved higher anthocyanin levels, with malvidin-3-glucoside and peonidin-3-glucoside at 0.55 µg/mL and 1.62 µg/mL, respectively, on the 35th day of storage.

High performance poly(L-lactic acid)-based film by one-step synthesis of poly (L-lactic acid-co-butylene itaconate-co-glycolic acid) for efficient preservation of yogurt storage.

Biodegradable poly(L-lactic acid) (PLLA) has seldom used for dairy packaging due to medium permeability and brittleness. Novel PLLA copolymers, poly (L-lactic acid-co-butylene itaconate-co-glycolic acid) (PLBIGA), were developed by integrating glycolic acid (GA) and poly(butylene itaconate) (PBI) into PLLA's structure using low molecular weight PLLA as a key initiator. Then, packaging materials with better barrier and mechanical properties were obtained by blended PLBIGA with PLLA. Both PLLA/PLBIGA films and polyethylene nylon composite film (PE/NY) were used for stirred yogurt packaging and storage at 4 °C for 25 days. Results revealed that yogurt packed by PLLA/PLBIGA films maintained stabler water-holding capacity, color, and viscosity over the storage period. Moreover, the integrity of the gel structure and the total viable count of lactic acid bacteria in yogurt packaged in PLLA/40-PLBIGA8 were also found to be superior to those in PE/NY packages, highlighting its eco-friendly advantages in dairy packaging.

Development of ultra-thin poly(L-lactic acid)-based films integrating toughness, barrier properties, and gas selectivity: Towards gas-permeation controllable green food packaging.

High costs and low performance have constrained the application of bio-based materials in food packaging. Herein, a series of ultra-thin poly(L-lactic acid-iconic acid N-diol) (P(LA-NI)) copolymer films were developed using a "one-step" polycondensation process with integrated toughness, barrier properties, gas selectivity, and quality control features. The massive branched structure and gg conformers in P(LA-NI) act as "internal chain expansion" and "internal plasticization". Meanwhile, P(LA-NI) contains numerous polar groups and unique nanoscale microphase structures to realize excellent CO2, O2 barrier, CO2/O2 selectivity, anti-fogging, and UV shielding functions. The atmosphere within the package spontaneously achieves the desirable low O2 and high CO2 levels when packaging button mushrooms with high respiratory metabolism. Eventually, the shelf life of button mushrooms reached 24 days, >3-fold extended. This PLLA-based film meets "dual carbon" and "food safety" goals and has vast potential for fresh food preservation.

Bactericidal Efficacy and Mechanisms of Non-Electrolytic Slightly Acidic Hypochlorous Water on Pseudomonas fragi and Pseudomonas fluorescens.

Chilled pork is frequently contaminated with Pseudomonas fragi and Pseudomonas fluorescens. In this study, the bactericidal efficacy and mechanisms of non-electrolytic slightly acidic hypochlorous water (NE-SAHW) against two strains of these two species were evaluated. The results showed that the antibacterial efficacy of NE-SAHW was positively correlated with the concentration level of NE-SAHW and negatively correlated with the initial populations of the strains. The strains of small populations were completely inhibited when provided with each level of NE-SAHW. The killed cells of P. fragi were 0.94, 1.39, 4.02, and 5.60 log10 CFU/mL, respectively, and of P. fluorescens they were 1.21, 1.52, 4.14, and 5.74 log10 CFU/mL, respectively, when the initial populations of the strains were at high levels (about 7 log10 CFU/mL). Both strains were completely killed within 12 s with the available chlorine concentration (ACC) of 50 mg/L of NE-SAHW. Morphological changes in both cells were observed by using a Scanning Electron Microscope (SEM) and it was discovered that the cell membranes were damaged, which led to the leakage of the intracellular substances, including K+, nucleic acid, and protein. In terms of the Fourier Transform Infrared Spectroscopy (FTIR) results, NE-SAHW destroyed the structures of membrane proteins and cell structure proteins, and influenced the composition of polysaccharides. The bacteria were definitely dead after treatment by NE-SAHW compared to the control according to the results of flow cytometry. These results demonstrated the potential bactericidal property of NE-SAHW when applied to the meat and other food sterilization industries.

Polypropylene/Poly(butylene adipate-co-terephthalate) Breathing Film for Inhibiting Pseudomonas and Maintaining Microbial Communities and Postharvest Quality of Allium mongolicum Regel during Storage.

Allium mongolicum Regel (A. mongolicum) is a healthy edible plant but highly perishable with a short shelf life of 1-2 d. Modified atmosphere packaging (MAP) could inhibit the postharvest senescence and decay of the vegetables. Thus, the aim of this study was to apply MAP with different gas permeabilities to the storage of A. mongolicum and evaluate its effects on maintaining microbial communities and the postharvest quality of A. mongolicum. The results showed that polypropylene/poly(butylene adipate-co-terephthalate) (PP/PBAT, abbreviated as PAT) MAP was suitable for the storage of A. mongolicum by establishing an optimal atmosphere of 0.5-0.6% O2 and 6.2-7.1% CO2 in the bag. It could delay the postharvest senescence of A. mongolicum and maintain its quality by slowing down its respiration rate and weight loss, reducing cell membrane permeability and lipid peroxidation, maintaining the cell wall, and reducing infection and the growth of microorganisms. However, A. mongolicum in HPT was more perishable than that in PAT during storage. Pseudomonas was found to be the main spoilage bacteria, and they could also be effectively inhibited by PAT-MAP. The next-generation sequencing results also showed the growth of Escherichia-Shigella, Clostridium sensu stricto 1, Streptococcus, Aureobasidium, Didymella, and Fusarium, responsible for A. mongolicum decay or human disease, was well inhibited by PAT-MAP. The results suggested that PAT-MAP could be used to maintain microbial diversity and the postharvest quality of A. mongolicum under cold storage conditions. It provided a feasible solution for the preservation, food quality, and safety control of A. mongolicum.

Towards ductile and high barrier poly(L-lactic acid) ultra-thin packaging film by regulating chain structures for efficient preservation of cherry tomatoes.

The irreconcilable paradox between barrier performance and ductility is a "stumbling block" restricting the development of poly(L-lactic acid) (PLLA) films in the packaging industry. In this work, we reported the fabrication of an ultra-thin PLLA-based film with barrier properties and ductility by adjusting the polarity and conformational behavior of the polymer chains. Firstly, a novel unsaturated poly(L-lactic acid-co-butyrate itaconate) P(LA-BI) copolymer containing CC double bonds was synthesized using melt polycondensation. The results reveal that the addition of 60 % of P(LA-BI) enables PLLA film to achieve an elongation at a break of 83.6 % due to P(LA-BI) containing partially branched structures, which resulted in the polymer chains being arranged more in a high-energy gg conformer. Meanwhile, because of the large number of CO polar groups in P(LA-BI), PLLA/P(LA-BI)60 film show CO2 and O2 permeability coefficients (CDP and OP) of 1.8 and 0.45 × 10-8 g·m·m-2·h-1·Pa-1 respectively, which means that it has excellent gas barrier properties. Moreover, PLLA/P(LA-BI)60 film shows a 33.3 % increase in CO2/O2 ratio and an excellent ultraviolet (UV) barrier performance compared to neat PLLA. Preservation results suggested that the CO2 and O2 levels within the package could be regulated by varying the amount of P(LA-BI) added. Among them, PLLA/P(LA-BI)40 film generated a more desirable CO2 and O2 atmosphere for cherry tomatoes preservation, which was reflected by the delaying of senescence, discoloration, and decay, inhibition of oxidative cell damage through reduced malondialdehyde production, and maintenance of nutritional and flavor substances in cherry tomatoes. This PLLA-based film offers the advantages of operational simplicity, environmental friendliness, and inexpensive cost, making it great promising for food preservation and other applications requiring barrier properties and ductility.

Effect of poly(L-lactic acid)/poly(ethylene glycol)-poly(L-lactic acid) block copolymer blend film on preservation of Chinese winter jujube (Ziziphus Jujuba Mill. cv. Dongzao).

The effect of poly(L-lactic acid)/poly(ethylene glycol)-poly(L-lactic acid) block film on preservation of Chinese winter jujube (Ziziphus Jujuba Mill.cv.Dongzao) was investigated. Eight arm poly(ethylene glycol)-poly(L-lactic acid) block copolymer (8-PEG/PLLA) and net structure 8-PEG/PLLA (NET-PEL) were successfully synthetized by ring-opening polymerization, and different percentages (5, 10, and 20 %) of them were blended with PLLA to prepared blends films. Mechanical properties, modulated different scanning calorimetry (MDSC), gas and water vapor permeability results showed that 8-PEG/PLLA and NET-PEL block copolymer greatly increased the toughness of blend films, could be decrease PLLA segment glass transition temperature (Tg)from 59.5 °C to 41.6-46.7 °C and cold crystallization temperature(Tcc)from 89.4 °C to 73.5-77.7 °C, and increased the oxygen (O2), carbon dioxide (CO2), and water vapor transmission rate. The an appropriate gas concentration [O2 (2.56-3.51 %), CO2 (5.05-5.56 %)] was created inside the PLLA/NET-PEL20% (NEPEL20)group, which could restrain increase of total soluble solids (TSS), malonaldehyde content. The firmness, color luminosity (L*), total phenols, and ascorbic acid were maintained at higher level，and kept its commercial value after 40 days of storage. The present data indicated that treating post-harvest winter jujubes with NEPEL20 MAP packaging was an effective method for preservation of postharvest winter jujube.

Effects of Low-Frequency Electromagnetic Field on the Physicochemical Properties of Freeze-Thawed Mongolian Cheese.

To verify whether a low-frequency electromagnetic field (LFE field) can help reduce structural damage during the freeze-thaw process and maintain shelf life, Mongolian cheese was frozen at -10, -20, and -30 °C, then thawed at microwave or room temperature. Results showed that LFE field-assisted frozen treatment could reduce ice crystal size and protect the protein matrix structure of cheese. Frozen-thawed cheese retained 96.5% of its hardness and showed no significant difference from the fresh one in elasticity, cohesion, and chewiness. Frozen cheese showed similar but slower ripening behavior during storage, suggesting a potential application of the LFE field in the frozen storage of high-protein foods.

Fabrication and design of poly(l-lactic acid) membrane for passive MAP packaging of Brassica chinensis L.

PLDx L copolymers were synthesized from physically stable rigid poly(l-lactic acid) (PLLA) and a few different molecular weights of polydimethylsiloxane (PDMS) to increase the O2 and CO2 permeabilities of PLLA films and make them acceptable for packaging highly respirable products. The effect of PDMS on the morphology, mechanical properties, and gas permeability of PLDx L was investigated. Copolymers showed approximately 10 times the fracture strain and 1.7 times the CO2 and O2 permeabilities of neat PLLA. Additionally, PLDx L maintained an increased CO2 /O2 perm-selectivity consistent between 5 and 40°C. Passive modified atmosphere packaging of Brassica chinensis L was developed to assess the membrane's impact on headspace gas inside the package. The results showed that poly(amide)/poly(ethylene) packaging with 48 cm2 PLD1.8 L membrane as a breathing window can provide 50 g B. chinensis L. with a healthy atmosphere of 3%-8% O2 and 5%-8% CO2 between 6 and 22 days. Vegetables packaged in PLD1.8 L had the lower respiration rate, lower nitrite contents, and less proliferation of microorganisms. Moreover, a suitable atmosphere kept vegetables with higher ascorbic acid and a good appearance after more than 2 weeks of storage at 5°C. PRACTICAL APPLICATION: The permeability of the PLLA-based membrane can be adjusted for the breathable window membrane of sealed fresh products. In the future, several types of film could be developed to match the respiratory and metabolic characteristics of different kinds of products. Such PLLA-based specialized membranes can refine the fresh-keeping function and be more attractive to the customer.

One-Step Synthesis of Poly(L-Lactic Acid)-Based Soft Films with Gas Permselectivity for White Mushrooms (Agaricus bisporus) Preservation.

Proper packaging can extend the shelf life and maintain the quality of mushrooms during storage. The purpose of this study is to investigate the preservation of Agaricus bisporus using copolymer-modified poly (L-lactide-co-butylene fumarate) and poly (L-lactide-co-glycolic acid) (PLBF and PLGA) packaging. Shelf life and quality were evaluated over 15 days of storage of Agaricus bisporus at 4 ± 1 °C and 90% relative humidity, including weight loss, browning index (BI), total phenolics (TP), ascorbic acid (AA), malondialdehyde content (MDA), electrolyte leakage rate (EC), and superoxide dismutase (SOD) and catalase (CAT). The results showed that mushrooms packaged in PLBF films exhibited better retention in BI, TP, and AA than those with PLLA, PLGA, or polyethylene (PE) films. They can reduce the rate of weight loss, EC, and MDA, which in turn increases the activity of SOD and CAT. PLBF and PLGA have substantially improved flexibility in comparison with PLLA. They also significantly reduced oxygen (O2) and carbon dioxide (CO2) permeability and changed the gas permeability ratio. These positive effects resulted in the effective restriction of O2 and CO2 in these packages, extending the post-harvest storage period of white mushrooms.

Colorimetric porous microspheres of natural sodium alginate for chilled pork visual monitoring.

Chilled meat is subject to deterioration by various factors during storage and distribution. Therefore, it is very important to monitor the quality of meat in real time. This study aims at preparing a natural, low-cost indicating microsphere to visualize the freshness of meat by the combination of sodium alginate (SA) and chitosan with 0-10 wt% anthocyanins derived from chokeberry as a colorant using ionic gelation method. Size-controlled porous SA microspheres with were further constructed by freeze-drying and their physicochemical properties were characterized by SEM, FTIR, DSC, and XRD. Results showed that microspheres with 1 wt% anthocyanin showed good responsiveness to different concentrations of ammonia and were able to effectively identify the freshness of chilled meat by color change. Principal component analysis showed that the color difference of the porous microspheres was highly significantly correlated with pH, TVB-N, total plate count and thiobarbituric acid active substance (p < 0.01), suggesting a visible satisfactory capability of the microspheres to identify the spoilage in pork. Principal component analysis showed that the color difference of the porous microspheres was highly significantly correlated with pH, TVB-N, total plate count and thiobarbituric acid active substance (P < 0.01), suggesting a visible satisfactory capability of the microspheres to identify the spoilage in pork.

Construction of gas permeable channel in poly(l-lactic acid) membrane and its control of the micro atmosphere in okra packaging.

An atmosphere within a package affects the metabolic process of food and the microbial growth of fresh products and has a vital role in preserving food. It depends on the membrane's specific gas permeability and selectivity to generate a desirable atmosphere for storage. In this study, triblock poly(l-lactic acid­d-ɛ-caprolactone) (PLDC) copolymers and three-arm poly(l-lactic acid-g-ɛ-caprolactone) (PLGC) star copolymers were synthesized, in which a microphase-separated morphology of sea-island structure was established in PLGC membrane as a gas "fast permeation channel" for regulating CO2 and O2 permeability and CO2/O2 selectivity. AFM observation revealed different well-defined micro phase-separated structures of PLGC with size ranges of 200- 300 nm. Comparing PLGC membrane with PLLA, CO2 and O2 transmission rates increased by 416.9 % and 132.7 %, while H2O transport rates increased by 245.6 %. Mechanical testing shows that the PLGC membrane exhibits 40.8-fold elongation at break compared to PLLA, showing excellent flexibility. Moreover, okra's equilibrium-modified atmosphere packaging was designed based on a theoretically derived model. Preservation results suggested that the PLGC packaging membrane could generate an ideal high 8.7- 9.2 % CO2 and low 2.3- 2.7 % O2 atmosphere for okra preservation, delaying the discoloring and rotting of okra.

Multi-responsive poly N-isopropylacrylamide/poly N-tert-butylacrylamide nanocomposite hydrogel with the ability to be adsorbed on the chitosan film as an active antibacterial material.

Nanocomposite hydrogel composed of Poly N-isopropylacrylamide (PNIPAM), poly N-tert-Butylacrylamide (PBAM) and poly acrylic acid (PAA) was synthesized by free radical polymerization, and then thymol was embedded in it, to design an active antibacterial material that could control release. The characterization of products used SEM, AFM, FTIR, Zeta sizer to analyze the sensitivity of nanoparticles to pH, temperature and salt ions, and the agar diffusion method was used to determine the antibacterial effect of the polymers. The results showed that nanoparticles had pH, temperature and salt ion responsiveness, PNIPAM/PBAM (65:35) nanoparticles loaded thymol had longer release time (more than 24 h) at lower temperature than that (around 6 h) at high temperature. In addition, the nanoparticles could also be adsorbed on the chitosan film, which makes it have a wider range of applications. All thymol-loaded nanoparticles showed antibacterial activity against both B. subtilis and E. coli, while the chitosan film adsorbed nanoparticles showed weak effect, which was related to the controlled and slow release of bacteriostatic agents. Thus, these copolymers have potential value in the development and application of bacteriostatic packaging films for food.

Biodegradable blend films of poly(ε-caprolactone)/poly(propylene carbonate) for shelf life extension of whole white button mushrooms.

Blend films with poly(ε-caprolactone)(PCL) and poly(propylene carbonate)(PPC)with thickness of approximately 40 µm and 60 µm, respectively, were prepared using a uniaxial-stretching extrusion process to modify the property of PCL. PCL/PPC blend films with better comprehensive properties with thickness about 60 µm were used for equilibrium-modified atmosphere packaging of button mushrooms at 5 °C. The gas barrier property together with water vapor permeability were evaluated as well as its effects on the shelf life button mushrooms. The results showed that the PCL/PPC20 and PCL/PPC50 blend films have suitable gas barrier property and water vapor permeability, which was helpful to generate an appropriate storage environment and more importantly no condensation occurred in these two packages. The lower weight loss of button mushrooms was observed for PCL/PPC20 and PCL/PPC50 blend films 4.43 and 4.46, respectively. The PCL/PPC blend films was more effective in decreasing the activity of PPO and preserving the color of the button mushrooms. The over market acceptability of button mushrooms packaged in PCL/PPC blend films still maintained good and within the limit of marketability after 17 days of storage.

Polylactic Acid/Cerium Fluoride Films: Effects of Cerium Fluoride on Mechanical Properties, Crystallinity, Thermal Behavior, and Transparency.

PLA is widely used in the field of disposable products for its good transparency, high strength, high modulus, and good processing performance. However, the crystallization rate and crystallinity of PLA are weak. In actual production, the PLA products that are typically obtained are amorphous with poor heat resistance, which greatly limits the application range of PLA products. Finding an effective nucleating agent to improve the transparency of PLA has been a hot topic in research. This study found that Cerium fluoride (CeF3) can effectively improve the crystallinity of PLA/CeF3 (P/F) films. When the content of CeF3 in PLA was 1 wt %, the retention ratio of visible light transmittance was 82.36%, the crystallinity was 29.8%, and the tensile strength was 59.92 MPa. Compared to pure PLA, the crystallinity of P/F1 increased by 56% and tensile strength increased by 8.76%. This study provided an alternative scheme that maintained the PLA film's transparency and improved the crystallinity of PLA, which significantly expanded the application of PLA.

Use of poly(ε-caprolactone)-based films for equilibrium-modified atmosphere packaging to extend the postharvest shelf life of garland chrysanthemum.

A uniaxial-stretched poly(ε-caprolactone)/poly(propylene carbonate; PCL/PPC) composite film was prepared using a twin-screw extruder, and its utility as an equilibrium-modified atmosphere packaging (EMAP) film extending the shelf life of garland chrysanthemums stored at 2~4°C was explored. The oxygen, carbon dioxide, and water vapor penetration properties, mechanical properties, and gas permselectivity of PCL/PPC film used to package garland chrysanthemums were determined and compared to those of controlled low-density polyethylene (LDPE) and PCL films. Physicochemical properties such as package headspace gas composition, weight loss, leaf color, total chlorophyll content, ascorbic acid content, lipid peroxidation extent, and the sensory traits of garland chrysanthemums were investigated over a storage period of 14 days to compare the preservative effects of the various packages. PPC blending decreased the PCL gas and water vapor permeability and slightly increased the CO 2 permselectivity. These effects on gas and water vapor permeability, combined with the effects on gas permselectivity, enhanced preservation of packed garland chrysanthemums. Furthermore, an O2 inner atmosphere level of 2%~5%, and a CO 2 concentration not greater than 8%, was established by the PCL/PPC film in the absence of condensation. The results thus suggest that biodegradable film can be used as an EMAP film to better maintain the quality of freshly harvested garland chrysanthemums and to afford a longer shelf life during cold storage compared to LDPE film. Sensory evaluation indicated that the garland chrysanthemums were market-acceptable after 14 days of storage; LDPE-packed chrysanthemums were acceptable only up to 8 days of storage. The film thus improved storage life compared to that afforded by LDPE.

Gas Permeability and Permselectivity of Poly(L-Lactic Acid)/SiOx Film and Its Application in Equilibrium-Modified Atmosphere Packaging for Chilled Meat.

A layer of SiOx was deposited on the surface of poly(L-lactic acid) (PLLA) film to fabricate a PLLA/SiOx layered film, by plasma-enhanced chemical vapor deposition (PECVD) process. PLLA/SiOx film showed Young's modulus and tensile strength increased by 119.2% and 91.6%, respectively, over those of neat PLLA film. At 5 °C, the oxygen (O2 ) and carbon dioxide (CO2 ) permeability of PLLA/SiOx film decreased by 78.7% and 71.7%, respectively, and the CO2 /O2 permselectivity increased by 32.5%, compared to that of the neat PLLA film. When the PLLA/SiOx film was applied to the equilibrium-modified atmosphere packaging of chilled meat, the gas composition in packaging reached a dynamic equilibrium with 6% to 11% CO2 and 8% to 13% O2 . Combined with tea polyphenol pads, which effectively inhibited the microbial growth, the desirable color of meat was maintained and an extended shelf life of 52 d was achieved for the chilled meat.

Hydrophobic lappaconitine loaded into iota-carrageenan by one step self-assembly.

New data on the loading of pH-sensitive lappaconitine loaded into iota-carrageenan (LA-ICG) is provided. This LA-ICG ionic biopolymer was prepared by one step self-assembly. The LA-ICG was characterized in terms of the loading capacity, lappaconitine (LA) releasing behavior, pH-sensitivity, and analgesic properties. Iota-carrageenan (ICG) high loading capacity reached up to 26.18% (w/w). Also, the LA, loaded with ICG, was released faster in an acidic environment than that in neutral or alkaline environments. Animal analgesic experiments showed that the LA-ICG of low molecular weight had earlier onset time and longer duration than the LA. These results suggest that the ICG of low molecular weight has great potential to achieve the synergistic effect of LA. In addition, the ICG can be used as a novel natural polymeric carrier for loading a hydrophobic alkaloid.

Sulfated polysaccharide heparin used as carrier to load hydrophobic lappaconitine.

One-step self-assembly was used to prepare pH-sensitive lappaconitine-loaded low-molecular-weight heparin (LMWH-LA) and to demonstrate that the sulfur group promotes dissolution and has synergistic effect on the analgesic property of lappaconitine (LA). The LMWH-LA was characterized in terms of releasing behavior, pH-sensitivity, analgesic activity and anticoagulation property. The drug loading level of LA in low-molecular-weight heparin (LMWH) reached 24.3% (w/w). The LA, self-assembled in LMWH, released faster in an acidic environment than that in neutral or alkaline environments. Analgesic experiments showed that the LMWH-LA had earlier onset time and longer duration than the LA. Compared with LMWH, the LMWH-LA can reduce clotting time more effectively. These results suggest that the LMWH is a good template and has great potential to achieve synergistic effect of LA. In addition, similar macromolecular structure can be used as a new natural polymeric carrier for loading hydrophobic alkaloids.