Electrochemical Aptamer-Based Biosensors for Measurements in Undiluted Human Saliva.

Although blood remains a gold standard diagnostic fluid for most health exams, it involves an unpleasant and relatively invasive sampling procedure (finger pricking or venous draw). Saliva contains many relevant and useful biomarkers for diagnostic purposes, and its collection, in contrast, is noninvasive and can be obtained with minimal effort. Current saliva analyses are, however, achieved using chromatography or lateral flow assays, which, despite their high accuracy and sensitivity, can demand expensive laboratory-based instruments operated by trained personnel or offer only semiquantitative results. In response, we investigated electrochemical aptamer-based (E-AB) biosensors, a reagentless sensing platform, to allow for continuous and real-time measurements directly in undiluted, unstimulated human whole saliva. As a proof-of-concept study, we developed E-AB biosensors capable of detecting low-molecular-weight analytes (glucose and adenosine monophosphate (AMP)). To our knowledge, we report the first E-AB sensor for glucose, an approach that is inherently independent of its chemical reactivity in contrast to home glucometers. For these three sensors, we evaluated their figures of merits, stability, and reusability over short- and long-term exposure directly in saliva. In doing so, we found that E-AB sensors allow rapid and convenient molecular measurements in whole saliva with unprecedented sensitivities in the pico- to nanomolar regime and could be regenerated and reused up to 7 days when washed and stored in phosphate-buffered saline at room temperature. We envision that salivary molecular measurements using E-AB sensors are a promising alternative to invasive techniques and can be used for improved point-of-care clinical diagnosis and at-home measurements.

Air Particulate Matter Induces Skin Barrier Dysfunction and Water Transport Alteration on a Reconstructed Human Epidermis Model.

Knowing the damage that particulate matter (PM) can cause in skin is important for tightly controlling the release of air pollutants and preventing more serious diseases. This study investigates if such alterations are present in reconstructed human epidermis exposed to coarse air PM. Exposure of reconstructed human epidermis to increasing concentrations (2.2, 8.9, and 17.9 µg/cm2) of standard urban PM over time led to decreased cell viability at 48 hours. The barrier function was shown to be compromised by 24 hours of exposure to high doses (17.9 µg/cm2). Morphological alterations included cytoplasm vacuolization and partial loss of epidermal stratification. Cytokeratin 10, involucrin, loricrin, and filaggrin protein levels were significantly decreased. We confirmed an inflammatory process by IL-1α release and found a significant increase in AQP3 expression. We also demonstrated changes in NOTCH1 and AhR expression of epidermis treated with coarse air PM. The use of hydrogen peroxide altered AQP3 and NOTCH1 expression, and the use of N-acetyl-L-cysteine altered NOTCH1 expression, suggesting that this is a redox-dependent process. These results demonstrate that coarse air PM induces dose-dependent inflammatory response and alterations in protein markers of differentiation and water transport in the epidermis that could ultimately compromise the structural integrity of the skin, promoting or exacerbating various skin diseases.

Facile Preparation of Ultrafine Aluminum Hydroxide Particles with or without Mesoporous MCM-41 in Ambient Environments.

An aqueous suspension of nanogibbsite was synthesized via the titration of aluminum aqua acid [Al(H2O)6]3+ with L-arginine to pH 4.6. Since the hydrolysis of aqueous aluminum salts is known to produce a wide array of products with a wide range of size distributions, a variety of state-of-the-art instruments (i.e., 27Al/1H NMR, FTIR, ICP-OES, TEM-EDX, XPS, XRD, and BET) were used to characterize the synthesis products and identification of byproducts. The product, which was comprised of nanoparticles (10-30 nm), was isolated using gel permeation chromatography (GPC) column technique. Fourier transform infrared (FTIR) spectroscopy and powder X-ray diffraction (PXRD) identified the purified material as the gibbsite polymorph of aluminum hydroxide. The addition of inorganic salts (e.g., NaCl) induced electrostatic destabilization of the suspension, thereby agglomerating the nanoparticles to yield Al(OH)3 precipitate with large particle sizes. By utilizing the novel synthetic method described here, Al(OH)3 was partially loaded inside the highly ordered mesoporous framework of MCM-41, with average pore dimensions of 2.7 nm, producing an aluminosilicate material with both octahedral and tetrahedral Al (Oh/Td = 1.4). The total Al content, measured using energy-dispersive X-ray spectrometry (EDX), was 11% w/w with a Si/Al molar ratio of 2.9. A comparison of bulk EDX with surface X-ray photoelectron spectroscopy (XPS) elemental analysis provided insight into the distribution of Al within the aluminosilicate material. Furthermore, a higher ratio of Si/Al was observed on the external surface (3.6) as compared to the bulk (2.9). Approximations of O/Al ratios suggest a higher concentration of Al(O)3 and Al(O)4 groups near the core and external surface, respectively. The newly developed synthesis of Al-MCM-41 yields a relatively high Al content while maintaining the integrity of the ordered silica framework and can be used for applications where hydrated or anhydrous Al2O3 nanoparticles are advantageous.

Noninvasive measurement of reepithelialization and microvascularity of suction-blister wounds with benchmarking to histology.

We explored use of the suction-blister wound model in the assessment of not only epidermal regeneration but also pain, the microvascular response and bacteriology. The effects of topical zinc sulfate were studied to articulate the methodologies in this double-blind trial. One epidermal suction blister (10 mm) was induced on each buttock in 30 healthy volunteers (15 females:15 males) and deroofed on day 0. The wounds were randomized to daily treatment with 1.4% zinc sulfate shower gel (n = 20), placebo (n = 20) or control (n = 20). Digital photography coupled with planimetry, transepidermal water loss (TEWL) measurement and optical coherence tomography (OCT) was benchmarked to the gold standard of histology of 60 full-thickness wound biopsies on day 4. Pain increased after application of the shower gels. Microvessel density, determined from OCT images, increased from day 0 to day 2 in the three groups but increased more with the placebo than with the zinc shower gel (p = 0.003) or the control treatment (p = 0.002) and correlated (rS = 0.313, p = 0.015) with the inflammatory response on day 4, as determined by histology. Coagulase-negative staphylococci were more common in wounds compared with skin (p = 0.002) and was reduced (p = 0.030) with zinc sulfate treatment. Planimetric analysis of digital wound images was not biased (p = 0.234) compared with histology, and TEWL measurements showed no correlation (rS = 0.052, p = 0.691) with epithelialization. Neoepidermal formation, determined by histology, did not differ (p = 0.290) among the groups. Zinc sulfate reduced (p = 0.031) the release of lactate dehydrogenase from cultured gel-treated keratinocytes isolated from the blister roofs. Therefore, combination of the standardized suction-blister wound model with noninvasive planimetry and OCT is a useful tool for assessing wound therapies. Zinc sulfate transiently dampened inflammation and reduced bacterial growth.

The Cutaneous Microbiome and Aspects of Skin Antimicrobial Defense System Resist Acute Treatment with Topical Skin Cleansers.

The human skin microbiome has been suggested to play an essential role in maintaining health by contributing to innate defense of the skin. These observations have inspired speculation that the use of common skin washing techniques may be detrimental to the epidermal antibacterial defense system by altering the microbiome. In this study, several common skin cleansers were used to wash human forearms and the short-term effect on the abundance of the antimicrobial peptide LL-37 and the abundance and diversity of bacterial DNA was measured. Despite small but significant decreases in the amount of LL-37 on the skin surface shortly after washing, no significant change in the bacterial community was detected. Furthermore, Group A Streptococcus did not survive better on the skin after washing. In contrast, the addition of antimicrobial compounds such as benzalkonium chloride or triclocarban to soap before washing decreased the growth of Group A Streptococcus applied after rinse. These results support prior studies that hand washing techniques in the health care setting are beneficial and should be continued. Additional research is necessary to better understand the effects of chronic washing and the potential impact of skin care products on the development of dysbiosis in some individuals.

Ultrathin hybrid films of polyoxohydroxy clusters and proteins: layer-by-layer assembly and their optical and mechanical properties.

The hierarchical assembly of inorganic and organic building blocks is an efficient strategy to produce high-performance materials which has been demonstrated in various biomaterials. Here, we report a layer-by-layer (LBL) assembly method to fabricate ultrathin hybrid films from nanometer-scale ionic clusters and proteins. Two types of cationic clusters (hydrolyzed aluminum clusters and zirconium-glycine clusters) were assembled with negatively charged bovine serum albumin (BSA) protein to form high-quality hybrid films, due to their strong electrostatic interactions and hydrogen bonding. The obtained hybrid films were characterized by scanning electron microscope (SEM), UV-vis, Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray fluorescence (XRF), and X-ray diffraction (XRD). The results demonstrated that the cluster-protein hybrid films exhibited structural homogeneity, relative transparency, and bright blue fluorescence. More importantly, these hybrid films displayed up to a 70% increase in hardness and up to a 100% increase in reduced Young's modulus compared to the pure BSA film. These hybrid cluster-protein films could be potentially used as biomedical coatings in the future because of their good transparency and excellent mechanical properties.

In vitro antibacterial efficacy of cetylpyridinium chloride-containing mouthwashes.

OBJECTIVE: The objective of this study was to examine the ability of three CPC-containing mouthwashes to kill planktonic bacteria in an in vitro short-exposure assay. METHODS: This blind study was conducted on two common oral bacterial species: Aggregatibacter (Actinobacillus) actinomycetemcomitans and Streptococcus mutans. The following mouthwashes were tested: two containing 0.075% CPC and 0.05% NaF in an alcohol-free base, and one containing 0.075% CPC and 0.05% NaF plus 6% alcohol. Additionally, a 0.05% NaF-only mouthwash was included as a negative control. Bacteria were exposed to one of the test mouthwashes for 30 seconds and then washed thoroughly, serially diluted, and plated on appropriate media to determine viable bacterial counts. Viable counts were converted to a log reduction in colony forming units (CFUs) relative to the negative control. RESULTS: All three test mouthwashes included in this study gave a statistically significant reduction of > 3 log CFUs relative to samples treated with the negative control. CONCLUSION: All three experimental 0.075% CPC mouthwash formulas gave a > 99.9% reduction in viable bacteria of both species following 30 seconds of treatment.

Efficacy of an alcohol-free CPC-containing mouthwash against oral multispecies biofilms.

OBJECTIVE: The aim of this work was to develop two static-model multispecies oral biofilm systems to compare the efficacy of a placebo mouthwash to an alcohol-free mouthwash containing 0.075% CPC. METHODS: Two model biofilm systems were used: a 24-well glass-bottom microplate (GM) system and a chamber slide (CS) system. These were inoculated with Schaedler media containing pooled, unfiltered saliva. During incubation at 37 degrees C in 5% CO2, Schaedler media was replaced every 24 hours. Five-day and 10-day multispecies biofilms in the GM and CS systems were then exposed to phosphate buffered saline, the placebo mouthwash, or the alcohol-free 0.075% CPC-containing mouthwash. Biofilms were visualized in three-dimensions by Confocal Laser Scanning Microscopy (CLSM), and fluorometric analyses were performed on biofilms in the GM system. RESULTS: CLSM demonstrated that regardless of the model system used, the alcohol-free 0.075% CPC-containing mouthwash solution increased the number of damaged biofilm cells. The efficacy of CPC was inversely related to the age of the biofilm. A contrariety between the two biofilm systems was that the CS system indicated that alcohol-free 0.075% CPC-containing mouthwash partially disrupted biofilms. Fluorometric analysis ofGM biofilms also demonstrated that the alcohol-free 0.075% CPC-containing mouthwash damaged biofilm cells. CONCLUSION: Two static oral multispecies model biofilms systems demonstrated that an alcohol-free 0.075% CPC-containing mouthwash had greater antimicrobial efficacy than a placebo mouthwash. The alcohol-free 0.075% CPC-containing formulation is effective against multispecies oral biofilms.

Fusobacterium nucleatum ATCC 10953 requires Actinomyces naeslundii ATCC 43146 for growth on saliva in a three-species community that includes Streptococcus oralis 34.

Formation of dental plaque is a developmental process involving initial and late colonizing species that form polymicrobial communities. Fusobacteria are the most numerous gram-negative bacteria in dental plaque, but they become prevalent after the initial commensal colonizers, such as streptococci and actinomyces, have established communities. The unusual ability of these bacteria to coaggregate with commensals, as well as pathogenic late colonizers, has been proposed to facilitate colonization by the latter organisms. We investigated the integration of Fusobacterium nucleatum into multispecies communities by employing two in vitro models with saliva as the sole nutritional source. In flow cell biofilms, numbers of cells were quantified using fluorescently conjugated antibodies against each species, and static biofilms were analyzed by quantitative real-time PCR (q-PCR) using species-specific primers. Unable to grow as single-species biofilms, F. nucleatum grew in two-species biofilms with Actinomyces naeslundii but not with Streptococcus oralis. However, enhanced growth of fusobacteria was observed in three-species biofilms, indicating that there was multispecies cooperation. Importantly, these community dynamics yielded an 18-fold increase in the F. nucleatum biomass between 4 h and 18 h in the flow cell inoculated with three species. q-PCR analysis of static biofilms revealed that maximum growth of the three species occurred at 24 h to 36 h. Lower numbers of cells were observed at 48 h, suggesting that saliva could not support higher cell densities as the sole nutrient. Integration of F. nucleatum into multispecies commensal communities was evident from the interdigitation of fusobacteria in coaggregates with A. naeslundii and S. oralis and from the improved growth of fusobacteria, which was dependent on the presence of A. naeslundii.

Comparing the effects of brushing with a new gel-to-foam dentifrice to brushing with regular fluoride control dentifrices on viable bacteria levels in saliva.

PURPOSE: To compare the effects of a new gel-to-foam dentifrice to two standard fluoride control dentifrices on foam generation, levels of total viable anaerobes and total viable volatile sulfur compound (VSC)-producing bacteria in expectorate after brushing. METHODS: 36 subjects participated in this investigator-blind, randomized, crossover study. After a 1-week wash-out period prior to each product use, participants reported to the test site having refrained from oral hygiene, eating and drinking on the morning prior to the visit. Subjects brushed with a full ribbon of assigned dentifrice (Aquafresh Iso-active, Aquafresh Extreme Clean or Aquafresh Fresh & Minty), then expectorated the slurry into a collection vessel after 30 and 60 seconds of supervised brushing. Total foam volume was immediately measured. Subjects then rinsed with sterile water for 10 seconds and expectorated into the same vessel, which was processed for microbiological analysis. Total viable anaerobes and total viable VSC-producing bacteria were enumerated using appropriate selective media. RESULTS: No statistically significant difference was indicated between the gel-to-foam dentifrice and either of the control dentifrices with respect to the level of total viable anaerobes (P > 0.05). The level of total viable VSC-producing bacteria was statistically significantly lower for the gel-to-foam dentifrice (Aquafresh Iso-active) than for one of the control dentifrices (Aquafresh Fresh & Minty) (P < 0.05), and numerically lower for the gel-to-foam dentifrice than for the other control dentifrice (Aquafresh Extreme Clean) (P = 0.0526). Use of the gel-to-foam dentifrice resulted in statistically significantly greater (P < 0.05) foam generation than the two control dentifrices.

Use of quantum dot luminescent probes to achieve single-cell resolution of human oral bacteria in biofilms.

Oral biofilms are multispecies communities, and in their nascent stages of development, numerous bacterial species engage in interspecies interactions. Better insight into the spatial relationship between different species and how species diversity increases over time can guide our understanding of the role of interspecies interactions in the development of the biofilms. Quantum dots (QD) are semiconductor nanocrystals and have emerged as a promising tool for labeling and detection of bacteria. We sought to apply QD-based primary immunofluorescence for labeling of bacterial cells with in vitro and in vivo biofilms and to compare this approach with the fluorophore-based primary immunofluorescence approach we have used previously. To investigate QD-based primary immunofluorescence as the means to detect distinct targets with single-cell resolution, we conjugated polyclonal and monoclonal antibodies to the QD surface. We also conducted simultaneous QD conjugate-based and fluorophore conjugate-based immunofluorescence and showed that these conjugates were complementary tools in immunofluorescence applications. Planktonic and biofilm cells were labeled effectively by considering two factors: the final nanomolar concentration of QD conjugate and the amount of antibody conjugated to the QD, which we define as the degree of labeling. These advances in the application of QD-based immunofluorescence for the study of biofilms in vitro and in vivo will help to define bacterial community architecture and to facilitate investigations of interactions between bacterial species in these communities.

In situ and non-invasive detection of specific bacterial species in oral biofilms using fluorescently labeled monoclonal antibodies.

Noninvasive in situ detection of suspected cariogenic bacterial species within dental biofilms could facilitate monitoring of the dynamic change of oral microbial flora and assist in the assessment of the treatment efficacy of therapeutic agents. In this study, we explore the possibility to use three well-characterized monoclonal antibodies (MAbs) against Streptococcus mutans, Actinomyces naeslundii, and Lactobacillus casei to identify these three important members of the oral microbial community in the complex environment of oral biofilms. These MAbs, which were conjugated to different fluorescent labels and visualized with confocal laser scanning microscopy (CLSM), proved to be an useful tool to identify the three species of interest (S. mutans, A. naeslundii, and L. casei) under various experimental conditions including in vitro and in vivo derived oral biofilms. Manifold addition of the MAbs on consecutive days did not alter the biofilm structure thus allowing monitoring of the same biofilm over extended time periods. Using this MAb-based method the effect of sucrose challenge on the biofilm composition and the distribution of S. mutans, A. naeslundii, and L. casei were examined. S. mutans was found to be the predominant species under the various biofilm conditions tested. These studies indicate that MAbs based bacterial detection with CLSM is a versatile tool which permits new insights into the ecology of oral biofilm development.

Analysis of the antibacterial activity and plaque control benefit of colgate total dentifrice via clinical evaluation and real-time polymerase chain reaction.

OBJECTIVE: This study analyzed, from a combined clinical and molecular biologic perspective, the antibacterial and antiplaque efficacy of Colgate Total dentifrice (CTD). METHODOLOGY: A single-blind crossover study design utilized 11 healthy human subjects. After a one-week washout period, subjects donated dental plaque, received a dental prophylaxis, and subsequently brushed with a test product. Twenty-four hours postbrushing, dental plaque was collected and a clinical plaque score determined. Dental plaque was submitted for Real-time Polymerase Chain Reaction (Real-time PCR) analysis. The same procedure was repeated in accordance with a crossover design for the use of the second test product. Following a one-week washout, a plaque donation, prophylaxis, and brushing with the test product ensued for each subject. Twenty-four hours post-brushing, the subjects returned for a plaque score and plaque donation. RESULTS: Twenty-four hours after brushing, dental plaque coverage increased 17.88% +/- 8.27% with CTD, compared to 30.42% +/- 9.97% with Colgate Cavity Protection (CCP; p = 0.005). Real-time PCR found plaque collected 24 hours after brushing with CTD exhibited, on average, fewer representative periodontal pathogens (Fusobacterium nucleatum, Actinobacillus actinomycetemcomitans, Tannerella forsythensis, and Porphyromonas gingivalis) and fewer early colonizers (Actinomyces naeslundii) than plaque collected before brushing, whereas CCP showed a moderate effect on oral bacteria. CONCLUSION: The study provides clinical and molecular biological evidence to substantiate the antibacterial and plaque control benefits of Colgate Total, and suggests the value of combining a molecular biological method with clinical research to corroborate clinical benefits.