Impact of stone characteristics on cavitation in burst wave lithotripsy.

Non-invasive kidney stone treatments such as shock wave lithotripsy (SWL) and burst wave lithotripsy (BWL) rely on the delivery of pressure waves through tissue to the stone. In both SWL and BWL, the potential to hinder comminution by exciting cavitation proximal to the stone has been reported. To elucidate how different stones alter prefocal cavitation in BWL, different natural and synthetic stones were treated in vitro using a therapy transducer operating at 350 kHz (peak negative pressure 7 MPa, pulse length 20 cycles, pulse repetition frequency 10 Hz). Stones were held in a confined volume of water designed to mimic the geometry of a kidney calyx, with the water filtered and degassed to maintain conditions for which the cavitation threshold (in the absence of a stone) matches that from in vivo observations. Stone targeting and cavitation monitoring were performed via ultrasound imaging using a diagnostic probe aligned coaxially with the therapy transducer. Quantitative differences in the extent and location of cavitation activity were observed for different stone types-e.g., "softer" stones (natural and synthetic) that disintegrate into "dusty" fragments produced larger prefocal cavitation clouds. Future work will focus on correlation of such cavitation metrics with stone fragmentation.

Update on clinical trials of kidney stone repositioning and preclinical results of stone breaking with one system.

Our goal is an office-based, handheld ultrasound system to target, detach, break, and/or expel stones and stone fragments from the urinary collecting system to facilitate natural clearance. Repositioning of stones in humans (maximum 2.5 MPa, and 3-second bursts) and breaking of stones in a porcine model (maximum 50 cycles, 20 Hz repetition, 30 minutes, and 7 MPa peak negative pressure) have been demonstrated using the same 350-kHz probe. Repositioning in humans was conducted during surgery with a ureteroscope in the kidney to film stone movement. Independent video review confirmed stone movements (≥ 3 mm) in 15 of 16 kidneys (94%). No serious or unanticipated adverse events were reported. Experiments of burst wave lithotripsy (BWL) effectiveness on breaking human stones implanted in the porcine bladder and kidney demonstrated fragmentation of 8 of 8 stones on post mortem dissection. A 1-week survival study with the BWL exposures and 10 specific-pathogen-free pigs, showed all findings were within normal limits on clinical pathology, hematology, and urinalysis. These results demonstrate that repositioning of stones with ultrasonic propulsion and breaking of stones with BWL are safe and effective.

In vivo ultrasonic measurement of tissue vibration at a stenosis: a case study.

It is known that bruits often can be heard downstream from stenoses. They are thought to be produced by disturbed blood flow and vessel wall vibrations. Our understanding of bruits has been limited, though, to analysis of sounds heard at the level of the skin. For direct measurements from the stenosis site, we developed an ultrasonic pulse-echo multigate system using quadrature phase demodulation. The system simultaneously measures tissue displacements and blood velocities at multiple depths. This paper presents a case study of a severe stenosis in a human infrainguinal vein bypass graft. During systole, nearly sinusoidal vessel wall vibrations were detected. Solid tissue vibration amplitudes measured up to 2 microm, with temporal durations of 100 ms and frequencies of roughly 145 Hz and its harmonics. Cross-axial oscillations were also found in the lumen that correlate with the wall vibrations, suggesting coupling between wall vibration and blood velocity oscillation.

Cross-beam vector Doppler ultrasound for angle-independent velocity measurements.

Combining Doppler measurements taken along multiple intersecting ultrasound (US) beams is one approach to obtaining angle-independent velocity. Over 30 laboratories and companies have developed such cross-beam systems since the 1970s. Early designs focused on multiple single-element probes. In the late 1980s, combining multiple color Doppler images acquired from linear-array transducers became a popular modality. This was further expanded to include beam steering and the use of subapertures. Often, with each change in design, came a new twist to calculating the velocity. This article presents a review of most proposed cross-beam systems published to date. The emphasis is on the basic design, the approach used to determine the angle-independent velocity, the advantages of the design, and the disadvantages of the design. From this, requirements needed to convert the idea of angle-independent vector Doppler into a commercial system are suggested.