RESUMEN
Rapid and efficient tendon fixation to a bone following trauma or in response to degenerative processes can be facilitated using a tendon anchoring device. Osteomimetic biomaterials, and in particular, bio-resorbable polymer composites designed to match the mineral phase content of native bone, have been shown to exhibit osteoinductive and osteoconductive properties in vivo and have been used in bone fixation for the past 2 decades. In this study, a resorbable, bioactive, and mechanically robust citrate-based composite formulated from poly(octamethylene citrate) (POC) and hydroxyapatite (HA) (POC-HA) was investigated as a potential tendon-fixation biomaterial. In vitro analysis with human Mesenchymal Stem Cells (hMSCs) indicated that POC-HA composite materials supported cell adhesion, growth, and proliferation and increased calcium deposition, alkaline phosphatase production, the expression of osteogenic specific genes, and activation of canonical pathways leading to osteoinduction and osteoconduction. Further, in vivo evaluation of a POC-HA tendon fixation device in a sheep metaphyseal model indicates the regenerative and remodeling potential of this citrate-based composite material. Together, this study presents a comprehensive in vitro and in vivo analysis of the functional response to a citrate-derived composite tendon anchor and indicates that citrate-based HA composites offer improved mechanical and osteogenic properties relative to commonly used resorbable tendon anchor devices formulated from poly(L-co-D, l-lactic acid) and tricalcium phosphate PLDLA-TCP.
RESUMEN
Low back pain poses a significant societal burden, with progressive intervertebral disc degeneration (IDD) emerging as a pivotal contributor to chronic pain. Improved animal models of progressive IDD are needed to comprehensively investigate new diagnostic and therapeutic approaches to managing IDD. Recent studies underscore the immune system's involvement in IDD, particularly with regards to the role of immune privileged tissues such as the nucleus pulposus (NP) becoming an immune targeting following initial disc injury. We therefore hypothesized that generating an active immune response against NP antigens with an NP vaccine could significantly accelerate and refine an IDD animal model triggered by mechanical puncture of the disc. To address this question, rabbits were immunized against NP antigens following disc puncture, and the impact on development of progressive IDD was assessed radiographically, functionally, and histologically compared between vaccinated and non-vaccinated animals over a 12-week period. Immune responses to NP antigens were assessed by ELISA and Western blot. We found that the vaccine elicited strong immune responses against NP antigens, including a dominant ~37 kD antigen. Histologic evaluation revealed increases IDD in animals that received the NP vaccine plus disc puncture, compared to disc puncture and vaccine only animals. Imaging evaluation evidenced a decrease in disc height index and higher scores of disc degeneration in animals after disc punctures and in those animals that received the NP vaccine in addition to disc puncture. These findings therefore indicate that it is possible to elicit immune responses against NP antigens in adult animals, and that these immune responses may contribute to accelerated development of IDD in a novel immune-induced and accelerated IDD model.
RESUMEN
Early detection of osteoporosis using advanced imaging is imperative to the successful treatment and prevention of high morbidity fractures in aging patients. In this preclinical study, we aimed to compare dual-energy X-ray absorptiometry (DXA) and quantitative computed tomography (QCT) to quantify bone mineral density (BMD) changes in the sheep lumbar spine. We also aimed to determine the relationship of BMD to microarchitecture in the same animals as an estimate of imaging modality precision. Osteoporosis was induced in 10 ewes via laparoscopic ovariectomy and administration of high-dose corticosteroids. We performed DXA and QCT imaging to measure areal BMD (aBMD) and trabecular volumetric BMD (Tb.vBMD)/cortical vBMD (Ct.vBMD), respectively, at baseline (before ovariectomy) and at 3, 6, 9, and 12 months after ovariectomy. Iliac crest bone biopsies were collected at each time point for micro-computed tomography (microCT) analysis; bone volume fraction (BV/TV), trabecular number (Tb.N), thickness (Tb.Th), and spacing (Tb.Sp) were reported. aBMD and Tb.vBMD both decreased significantly by 3 and 6 months (p < 0.05) compared with baseline, whereas no changes to Ct.vBMD were observed. Combined (Tb. and Ct.) vBMD was significantly correlated with aBMD at all time points (all p < 0.05). Additionally, greater significant correlations were found between BV/TV and Tb.vBMD at all five time points (R 2 = 0.54, 0.57, 0.66, 0.46, and 0.56, respectively) than with aBMD values (R 2 = 0.23, 0.55, 0.41, 0.20, and 0.19, respectively). The higher correlation of microCT values with QCT than with DXA indicates that QCT provides additional detailed information regarding bone mineral density changes in preclinical settings. Because trabecular bone is susceptible to rapid density loss and structural changes during osteoporosis, QCT can capture these subtle changes more precisely than DXA in a large animal preclinical model. © 2023 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.
RESUMEN
Background: The use of intervertebral cages within the interbody fusion setting is ubiquitous. Synthetic cages are predominantly manufactured using materials such as Ti and PEEK. With the advent of additive manufacturing techniques, it is now possible to spatially vary complex 3D geometric features within interbody devices, enabling the devices to match the stiffness of native tissue and better promote bony integration. To date, the impact of surface porosity of additively manufactured Ti interbody cages on fusion outcomes has not been investigated. Thus, the objective of this work was to determine the effect of implant endplate surface and implant body architecture of additive manufactured lattice structure titanium interbody cages on bony fusion. Methods: Biomechanical, microcomputed tomography, static and dynamic histomorphometry, and histopathology analyses were performed on twelve functional spine units obtained from six sheep randomly allocated to body lattice or surface lattice groups. Results: Nondestructive kinematic testing, microcomputed tomography analysis, and histomorphometry analyses of the functional spine units revealed positive fusion outcomes in both groups. These data revealed similar results in both groups, with the exception of bone-in-contact analysis, which revealed significantly improved bone-in-contact values in the body lattice group compared to the surface lattice group. Conclusion: Both additively manufactured porous titanium cage designs resulted in increased fusion outcomes as compared to PEEK interbody cage designs as illustrated by the nondestructive kinematic motion testing, static and dynamic histomorphometry, microcomputed tomography, and histopathology analyses. While both cages provided for similar functional outcomes, these data suggest boney contact with an interbody cage may be impacted by the nature of implant porosity adjacent to the vertebral endplates.
RESUMEN
OBJECTIVES: This study explored the efficacy of collecting temporal fracture site compliance data via an advanced direct electromagnetic coupling (DEC) system equipped with a Vivaldi-type antenna, novel calibration technique, and multi-antenna setup (termed maDEC) as an approach to monitor acute fracture healing progress in a translational large animal model. The overarching goal of this approach was to provide insights into the acute healing dynamics, offering a promising avenue for optimizing fracture management strategies. METHODS: A sample of twelve sheep, subjected to ostectomies and intramedullary nail fixations, was divided into two groups, simulating normal and impaired healing scenarios. Sequential maDEC compliance or stiffness measurements and radiographs were taken from the surgery until euthanasia at four or eight weeks and were subsequently compared with post-sacrifice biomechanical, micro-CT, and histological findings. RESULTS: The results showed that the maDEC system offered straightforward quantification of fracture site compliance via a multiantenna array. Notably, the rate of change in the maDEC-measured bending stiffness significantly varied between normal and impaired healing groups during both the 4-week (p = 0.04) and 8-week (p = 0.02) periods. In contrast, radiographically derived mRUST healing measurements displayed no significant differences between the groups (p = 0.46). Moreover, the cumulative normalized stiffness maDEC data significantly correlated with post-sacrifice mechanical strength (r2 = 0.80, p < 0.001), micro-CT measurements of bone volume fraction (r2 = 0.60, p = 0.003), and density (r2 = 0.60, p = 0.003), and histomorphometric measurements of new bone area fraction (r2 = 0.61, p = 0.003) and new bone area (r2 = 0.60, p < 0.001). CONCLUSIONS: These data indicate that the enhanced maDEC system provides a non-invasive, accurate method to monitor fracture healing during the acute healing phase, showing distinct stiffness profiles between normal and impaired healing groups and offering critical insights into the healing process's progress and efficiency.
Asunto(s)
Curación de Fractura , Fracturas Óseas , Animales , Ovinos , Fracturas Óseas/diagnóstico por imagen , Fijadores Internos , Radiografía , Fenómenos Electromagnéticos , Fenómenos BiomecánicosRESUMEN
Fisetin has been shown to be beneficial for brain injury and age-related brain disease via different mechanisms. The purpose of this study was to determine the presence of senescent cells and the effects of fisetin on cellular senescence in the brain and other vital organs in old sheep, a more translational model. Female sheep 6-7 years old (N = 6) were treated with 100 mg/kg fisetin or vehicle alone on two consecutive days a week for 8 weeks. All vital organs were harvested at the time of sacrifice. Histology, immunofluorescence staining, and RT-Q-PCR were performed on different regions of brain tissues and other organs. Our results indicated that fisetin treatment at the current regimen did not affect the general morphology of the brain. The presence of senescent cells in both the cerebral brain cortex and cerebellum and non-Cornu Ammonis (CA) area of the hippocampus was detected by senescent-associated ß-galactosidase (SA-ß-Gal) staining and GL13 (lipofuscin) staining. The senescent cells detected were mainly neurons in both gray and white matter of either the cerebral brain cortex, cerebellum, or non-CA area of the hippocampus. Very few senescent cells were detected in the neurons of the CA1-4 area of the hippocampus, as revealed by GL13 staining and GLB1 colocalization with NEUN. Fisetin treatment significantly decreased the number of SA-ß-Gal+ cells in brain cortex white matter and GL13+ cells in the non-CA area of the hippocampus, and showed a decreasing trend of SA-ß-Gal+ cells in the gray matter of both the cerebral brain cortex and cerebellum. Furthermore, fisetin treatment significantly decreased P16+ and GLB1+ cells in neuronal nuclear protein (NEUN)+ neurons, glial fibrillary acidic protein (GFAP)+ astrocytes, and ionized calcium binding adaptor molecule 1 (IBA1)+ microglia cells in both gray and white matter of cerebral brain cortex. Fisetin treatment significantly decreased GLB1+ cells in microglia cells, astrocytes, and NEUN+ neurons in the non-CA area of the hippocampus. Fisetin treatment significantly decreased plasma S100B. At the mRNA level, fisetin significantly downregulated GLB1 in the liver, showed a decreasing trend in GLB1 in the lung, heart, and spleen tissues, and significantly decreased P21 expression in the liver and lung. Fisetin treatment significantly decreased TREM2 in the lung tissues and showed a trend of downregulation in the liver, spleen, and heart. A significant decrease in NRLP3 in the liver was observed after fisetin treatment. Finally, fisetin treatment significantly downregulated SOD1 in the liver and spleen while upregulating CAT in the spleen. In conclusion, we found that senescent cells were widely present in the cerebral brain cortex and cerebellum and non-CA area of the hippocampus of old sheep. Fisetin treatment significantly decreased senescent neurons, astrocytes, and microglia in both gray and white matter of the cerebral brain cortex and non-CA area of the hippocampus. In addition, fisetin treatment decreased senescent gene expressions and inflammasomes in other organs, such as the lung and the liver. Fisetin treatment represents a promising therapeutic strategy for age-related diseases.
RESUMEN
Bone transport is a surgery-driven procedure for the treatment of large bone defects. However, challenging complications include prolonged consolidation, docking site nonunion and pin tract infection. Here, we develop an osteoinductive and biodegradable intramedullary implant by a hybrid tissue engineering construct technique to enable sustained delivery of bone morphogenetic protein-2 as an adjunctive therapy. In a male rat bone transport model, the eluting bone morphogenetic protein-2 from the implants accelerates bone formation and remodeling, leading to early bony fusion as shown by imaging, mechanical testing, histological analysis, and microarray assays. Moreover, no pin tract infection but tight osseointegration are observed. In contrast, conventional treatments show higher proportion of docking site nonunion and pin tract infection. The findings of this study demonstrate that the novel intramedullary implant holds great promise for advancing bone transport techniques by promoting bone regeneration and reducing complications in the treatment of bone defects.
Asunto(s)
Implantes Absorbibles , Osteogénesis , Masculino , Animales , Ratas , Bioensayo , Regeneración Ósea , OseointegraciónRESUMEN
Background: The metatarsal bone is commonly utilized in preclinical fracture models in sheep. A majority of studies achieve fracture stabilization with bone plating, but more recently intramedullary interlocking nails (IMN) have been utilized. The mechanical properties of this unique surgical technique utilizing an IMN has not yet been fully elucidated or compared to the traditional locking compression plating (LCP) technique. We hypothesize that a mid-diaphysis metatarsal critical-sized osteotomy stabilized with an IMN will provide equivalent mechanical stability to LCP with less variance of mechanical properties across specimens. Methods: Sixteen ovine hind limbs were transected at the mid tibia with soft tissue intact and utilized for implantation. A 3-cm osteotomy was created in the mid-diaphysis of all metatarsi. For the IMN group, a 147 mm × 8 mm IMN was implanted from distal to proximal through the sagittal septum of the distal metatarsus and the bolts locked in place using an IMN guide system. For the LCP group, a 3.5-mm 9-hole LCP was secured to the lateral aspect of the metatarsus with three locking screws in the proximal and distal holes leaving the central three holes empty. All metatarsal constructs were fitted with three strain gages on proximal and distal metaphyses and the lateral aspect of the IMN or LCP at the osteotomy site. Non-destructive mechanical testing was performed in compression, torsion, and four-point bending. Results: The IMN constructs showed overall greater construct stiffness with less variance in strain between constructs than the LCP constructs in 4-point bending, compression, and torsion. Conclusions: IMN constructs may provide superior mechanical properties for a critical-sized osteotomy model of the ovine metatarsus when compared to lateral LCP constructs. Further in vivo investigation comparing characteristics of fracture healing between IMN and LCP is warranted.
RESUMEN
Background: Segmental large volume bone loss resulting from fracture or osseous neoplasia is a major challenge to orthopedic surgeons and there is an ongoing quest to identify treatments that optimize healing. To advance treatment, large animal translational models-such as the ovine critical-sized tibia defect model-are instrumental for testing of novel scaffolds for bone regeneration. However, little standardization in the implants utilized for defect stabilization has been determined and current commercially available implants may be inadequate to replicate the strength of the native tibia. We hypothesize that a 10-mm interlocking nail (ILN) would be stiffer in axial, bending, and torsional loading than its 8-mm counterpart and would be stiffer in axial and torsional loading compared to a 4.5-mm broad locking compression plate (LCP). Methods: Tibias were harvested from 24 ovine hind limbs from skeletally mature ewes euthanized for reasons unrelated to this study and were randomized to treatment group. An ex vivo comparison of a novel 10-mm angle-stable non-tapered ILN was compared to a commercially available 8-mm angle-stable tapered ILN and a broad LCP in an ovine critical-sized (5-cm) tibia defect model. Axial stiffness, torsional stiffness, and bending stiffness were determined in control intact tibia and tibial constructs in the three treatment groups. Following implantation, radiography was performed in all limbs and tibia length and cortical and medullary cavity diameter were measured. Comparisons between groups were assessed with a one-way analysis of variance. Significance was set at P<0.05. Results: The 10-mm ILN in tibia containing a 5-cm ostectomy gap most closely replicated the structural properties of intact tibia compared with other constructs. The 10-mm ILN had significantly stronger torsional (P<0.001) and bending (P=0.002) stiffness than the 8-mm ILN, and was significantly stronger than the LCP in axial (P=0.04) and torsional (P=0.01) stiffness. Conclusions: A 10-mm ILN used to stabilize an ovine critically-sized tibia defect most closely mimicked the structural properties of the intact tibia when compared to a 8-mm ILN or broad LCP. Further in vivo testing will aid in determining which stabilization method is best suited for testing of novel tissue engineering and bone healing studies.
RESUMEN
PURPOSE: To perform a preclinical histologic assessment of a biphasic acellular interpositional cancellous allograft in an ovine model of rotator cuff repair (RCR) designed to better understand its safety profile and effects on tendon healing after RCR. METHODS: Thirty skeletally mature sheep with clinically normal shoulders with an artificially created degenerative infraspinatus tendon tear were randomized to control and treatment groups. Animals were euthanized at 3 weeks, 6 weeks, and 12 weeks. After gross dissection, rotator cuff specimens were fixed with formalin and polymerized for sectioning and staining. Blinded histologic scores evaluated inflammatory cell infiltrates, signs of degradation, particulate debris, collagen arrangement, neovascularization, and enthesis qualitative measures. RESULTS: There were no treatment specimens that exhibited histologic signs of a significant infection, inflammatory infiltrate, or foreign body reaction such as granuloma or fibrous capsule formation. Histologic scores in all categories were not significantly different at all time points, including the primary end point mean cumulative inflammatory score (control: 3.66 ± 1.21 vs treated: 4.33 ± 1.51, P = .42), when comparing the treatment and control RCR groups. In general, the degree of tendon healing and host tissue response was essentially equivalent between the 2 groups with observation of low overall levels of inflammation and progressive improvements in collagen organization, reduced tenocyte activity, and fibrocartilaginous enthesis reformation. CONCLUSIONS: This histologic study demonstrated the use of a biphasic interpositional allograft for RCR augmentation in an ovine model does not generate an inflammatory response or foreign body reaction. Use of the biphasic interpositional allograft resulted in a histological profile that was essentially equivalent to that of a standard RCR at 3-, 6-, and 12-week postoperative timepoints. These findings suggest that a biphasic interpositional allograft is safe for further clinical investigation in humans before broader clinical application. CLINICAL RELEVANCE: Patch augmentation of RCR is a popular technique that has shown clinical success in improving the likelihood of a successful repair in patients at elevated risk for retear. Newer augmentation technologies are being developed to address the biology at the interface between the bone and soft tissue where failure typically occurs.
Asunto(s)
Lesiones del Manguito de los Rotadores , Manguito de los Rotadores , Humanos , Animales , Ovinos , Manguito de los Rotadores/patología , Lesiones del Manguito de los Rotadores/cirugía , Lesiones del Manguito de los Rotadores/patología , Cicatrización de Heridas/fisiología , Colágeno/metabolismo , Aloinjertos/patologíaRESUMEN
The high failure rate of rotator cuff repair surgeries is positively correlated with age, yet the biomechanical changes to the tendons of the rotator cuff with age have not been described. As such, we sought to benchmark and characterize the biomechanical and histopathological properties with the accompanying gene expression of human rotator cuff tendons as a function of age and histopathological degeneration. All four rotator cuff tendons from fresh human cadaver shoulders underwent biomechanical, histopathological, and gene expression analyses. Following cadaver availability, samples were grouped into Younger (i.e., less than 36 years of age, n = 2 donors) and Aged (i.e., greater than 55 years of age, n = 3 donors) as a means of characterizing and quantifying the age-related changes exhibited by the tendons. Biomechanical testing and subsequent computational modeling techniques revealed both differences in properties between tendons and greater Young's moduli in the Younger tendons (supraspinatus 3.06x, infraspinatus 1.76x, subscapularis 1.25x, and teres minor 1.32x). Histopathological scoring using the semi-quantitative Bonar scoring scheme revealed a positive correlation with age across all tendons (r = 0.508, p < 0.001). These data contextualize the biomechanical and histopathological changes to tendons that occurs naturally with aging, highlighting the innate differences in biomechanical properties of all four rotator cuff tendons, as well as the difference in their degenerative trajectories. Additionally, the histopathological scoring revealed moderate signs of degeneration within the Younger supraspinatus tendons, suggesting tissue quality may decrease in this specific tendon in patients less than 40 years old, before clinical symptoms or tears.
Asunto(s)
Lesiones del Manguito de los Rotadores , Manguito de los Rotadores , Humanos , Preescolar , Adulto , Manguito de los Rotadores/patología , Lesiones del Manguito de los Rotadores/patología , Fenómenos Biomecánicos , Envejecimiento , CadáverRESUMEN
Regeneration of calvarial bone remains a major challenge in the clinic as available options do not sufficiently regenerate bone in larger defect sizes. Calvarial bone regeneration cases involving secondary medical conditions, such as brain herniation during traumatic brain injury (TBI) treatment, further exacerbate treatment options. Hydrogels are well-positioned for severe TBI treatment, given their innate flexibility and potential for bone regeneration to treat TBI in a single-stage surgery. The current study evaluated a photocrosslinking pentenoate-modified hyaluronic acid polymer with thiolated demineralized bone matrix (i.e., TDBM hydrogel) capable of forming a completely interconnected hydrogel matrix for calvarial bone regeneration. The TDBM hydrogel demonstrated a setting time of 120 s, working time of 3 to 7 days, negligible change in setting temperature, physiological setting pH, and negligible cytotoxicity, illustrating suitable performance for in vivo application. Side-by-side ovine calvarial bone defects (19 mm diameter) were employed to compare the TDBM hydrogel to the standard-of-care control material DBX®. After 16 weeks, the TDBM hydrogel had comparable healing to DBX® as demonstrated by mechanical push-out testing (~800 N) and histology. Although DBX® had 59% greater new bone volume compared to the TDBM hydrogel via micro-computed tomography, both demonstrated minimal bone regeneration overall (15 to 25% of defect volume). The current work presents a method for comparing the regenerative potential of new materials to clinical products using a side-by-side cranial bone defect model. Comparison of novel biomaterials to a clinical product control (i.e., standard-of-care) provides an important baseline for successful regeneration and potential for clinical translation.
RESUMEN
OBJECTIVE: To develop an in vivo experimental model for bone marrow lesions (BMLs) in ovine femorotibial joints. STUDY DESIGN: Randomized, prospective experimental study. ANIMALS: Eighteen healthy, skeletally-mature Dorper cross ewes. METHODS: One medial femoral condyle was penetrated with a 1.1 mm pin, and the contralateral medial femoral condyle was treated with transcutaneous extracorporeal shockwave (ESW) at 0.39 ± 0.04 mJ/mm2 . Clinical examination, magnetic resonance imaging (MRI), computed tomography (CT), and histopathological analyses were used to detect and characterize the development and progression of BMLs in the medial femoral condyle at 4, 8, and 12 weeks post-surgery. RESULTS: Pin penetration induced a BML detected on MRI within 2 weeks and lasted at least 12 weeks. BMLs were not observed in ESW-treated condyles. Histologically, BMLs were characterized by hemorrhage and inflammatory cellular infiltrate, and progressed to more dense fibrous tissue over time. Pathological changes were not observed in the articular cartilage overlying the region of BMLs. CONCLUSIONS: Direct, focal trauma to all layers of the osteochondral unit was sufficient to create an experimentally-induced BML which persisted for at least 90 days. The protocol used for ESW in this study did not induce BMLs. CLINICAL SIGNIFICANCE: Experimental induction of BMLs is possible and mimicked naturally occurring disease states. Volumetric imaging is a sensitive method for characterization of the dynamic nature of these lesions.
Asunto(s)
Enfermedades Óseas , Enfermedades de los Cartílagos , Cartílago Articular , Osteoartritis de la Rodilla , Enfermedades de las Ovejas , Ovinos , Animales , Femenino , Médula Ósea/patología , Osteoartritis de la Rodilla/patología , Osteoartritis de la Rodilla/veterinaria , Estudios Prospectivos , Articulación de la Rodilla/patología , Fémur/diagnóstico por imagen , Fémur/patología , Imagen por Resonancia Magnética/veterinaria , Imagen por Resonancia Magnética/métodos , Cartílago Articular/patología , Enfermedades Óseas/veterinaria , Enfermedades de los Cartílagos/veterinaria , Oveja Doméstica , Modelos TeóricosRESUMEN
A tibial tuberosity advancement (TTA), used to treat lameness in the canine stifle, provides a framework to investigate implant performance within an uneven loading environment due to the dominating patellar tendon. The purpose of this study was to reassess how we design orthopaedic implants in a load-bearing model to investigate potential for improved osseointegration capacity of fully-scaffolded mechanically-matched additive manufactured (AM) implants. While the mechanobiological nature of bone is well known, we have identified a lower limit in the literature where investigation into exceedingly soft scaffolds relative to trabecular bone ceases due to the trade-off in mechanical strength. We developed a finite element model of the sheep stifle to assess the stresses and strains of homogeneous and locally-optimised TTA implant designs. Using additive manufacturing, we printed three different low-stiffness Ti-6Al-4 V TTA implants: 0.8 GPa (Ti1), 0.6 GPa (Ti2) and an optimised design with a 0.3 GPa cortex and 0.1 GPa centre (Ti3), for implantation in a 12-week in vivo ovine pilot study. Static histomorphometry demonstrated uniform bone ingrowth in optimised low-modulus Ti3 samples compared to homogeneous designs (Ti1 and Ti2), and greater bone-implant contact. Mineralising surfaces were apparent in all implants, though mineral apposition rate was only consistent throughout Ti3. The greatest bone formation scores were seen in Ti3, followed by Ti2 and Ti1. Results from our study suggest lower stiffnesses and higher strain ranges improve early bone formation, and that by accounting for loading environments through rational design, implants can be optimised to improve uniform osseointegration. STATEMENT OF SIGNIFICANCE: The effect of different strain ranges on bone healing has been traditionally investigated and characterised through computational models, with much of the literature suggesting higher strain ranges being favourable. However, little has been done to incorporate strain-optimisation into porous orthopaedic implants due to the trade-off in mechanical strength required to induce these microenvironments. In this study, we used finite element analysis to optimise the design of additive manufactured (AM) titanium orthopaedic implants for different strain ranges, using a clinically-relevant surgical model. Our research suggests that there is potential for locally-optimised AM scaffolds in the use of orthopaedic devices to induce higher strains, which in turn encourages de novo bone formation and uniform osseointegration.
Asunto(s)
Osteogénesis , Titanio , Animales , Ovinos , Perros , Titanio/farmacología , Proyectos Piloto , Prótesis e Implantes , Oseointegración , Porosidad , AleacionesRESUMEN
Following herniation of the intervertebral disc, there is a need for advanced surgical strategies to protect the diseased tissue from further herniation and to minimize further degeneration. Accordingly, a novel tissue engineered implant for annulus fibrosus (AF) repair was fabricated via three-dimensional fiber deposition and evaluated in a large animal model. Specifically, lumbar spine kinetics were assessed for eight (n = 8) cadaveric ovine lumbar spines in three pure moment loading settings (flexion-extension, lateral bending, and axial rotation) and three clinical conditions (intact, with a defect in the AF, and with the defect treated using the AF repair implant). In ex vivo testing, seven of the fifteen evaluated biomechanical measures were significantly altered by the defect. In each of these cases, the treated spine more closely approximated the intact biomechanics and four of these cases were also significantly different to the defect. The same spinal kinetics were also assessed in a preliminary in vivo study of three (n = 3) ovine lumbar spines 12 weeks post-implantation. Similar to the ex vivo results, functional efficacy of the treatment was demonstrated as compared to the defect model at 12 weeks post-implantation. These promising results motivate a future large animal study cohort which will establish statistical power of these results further elucidate the observed outcomes, and provide a platform for clinical translation of this novel AF repair patch strategy. Ultimately, the developed approach to AF repair holds the potential to maintain the long-term biomechanical function of the spine and prevent symptomatic re-herniation.
RESUMEN
BACKGROUND: Osteoporosis is an independent risk factor for failure after arthroscopic rotator cuff repair. Since rerupture rates after rotator cuff repair are associated with decreased bone mineral density and bone microarchitecture, adaptations of biomechanical properties of the rotator cuff enthesis in patients with osteoporosis remain unclear. Additionally, the effects of osteogenic therapy carrier drugs used for the treatment of osteoporosis on rotator cuff structure and properties have not been previously documented. PURPOSE: To investigate the changes to soft tissue biomechanics and insertional structure secondary to osteoporosis with and without an osteogenic therapy carrier (ie, modified alendronate). STUDY DESIGN: Controlled laboratory study. METHODS: Biomechanical, histopathological, and microcomputed tomography analyses were performed on 20 shoulders obtained from 10 osteoporotic sheep randomly allocated to modified bisphosphonate (ie, alendronate) or control (ie, osteoporotic without treatment) groups; 6 shoulders from healthy sheep were utilized for comparison purposes. RESULTS: Tendons from the control group exhibited a 57% decrease in undeformed Young modulus as compared with the healthy group (P = .010). Tendons from the modified bisphosphonate treatment group exhibited a 229% increase in initial Young modulus as compared with the control group (P = .010). Marked changes within the tendon insertional organization were noted in both the control and the modified bisphosphonate treatment group samples as evidenced by increased interdigitation of the bone-mineralized fibrocartilaginous junction. The control samples exhibited a markedly paucicellular insertion, whereas the modified bisphosphonate treated tendons exhibited a hypercellular insertional region as compared with the healthy group. Both groups exhibited significantly (P < .01) decreased bone quality underlying the infraspinatus insertion, as evidenced by all microcomputed tomography outcome parameters. CONCLUSION: This work illuminates changes to rotator cuff tendon secondary to osteoporosis. Specifically, it revealed decreased tendon modulus and altered insertional structure in the osteoporotic samples. Secondarily, these data revealed increases in tendon modulus accompanied by increased cellularity within the tendon insertion region after systemic modified bisphosphonate injections. CLINICAL RELEVANCE: Bisphosphonate treatment may have a positive effect on the healing of the enthesis after rotator cuff repair.
Asunto(s)
Osteoporosis , Lesiones del Manguito de los Rotadores , Animales , Alendronato , Manguito de los Rotadores/cirugía , Lesiones del Manguito de los Rotadores/cirugía , Ovinos , Microtomografía por Rayos XRESUMEN
There is an unmet need for novel and efficacious therapeutics for regenerating injured articular cartilage in progressive osteoarthritis (OA) and/or trauma. Mesenchymal stem cells (MSCs) are particularly promising for their chondrogenic differentiation, local healing environment modulation, and tissue- and organism-specific activity; however, despite early in vivo success, MSCs require further investigation in highly-translatable models prior to disseminated clinical usage. Large animal models, such as canine, porcine, ruminant, and equine models, are particularly valuable for studying allogenic and xenogenic human MSCs in a human-like osteochondral microenvironment, and thus play a critical role in identifying promising approaches for subsequent clinical investigation. In this mini-review, we focus on [1] considerations for MSC-harnessing studies in each large animal model, [2] source tissues and organisms of MSCs for large animal studies, and [3] tissue engineering strategies for optimizing MSC-based cartilage regeneration in large animal models, with a focus on research published within the last 5 years. We also highlight the dearth of standard assessments and protocols regarding several crucial aspects of MSC-harnessing cartilage regeneration in large animal models, and call for further research to maximize the translatability of future MSC findings.
RESUMEN
OBJECTIVE: To report the clinical outcomes of horses with chronic guttural pouch infection characterized by accumulation of mucopurulent material following transpharyngeal diode laser fenestration. ANIMALS: 13 client-owned horses. PROCEDURES: Horses undergoing diode laser fenestration for chronic guttural pouch infection were identified by medical record search. Signalment, disease history, presence of mucopurulent empyema or chondroids, and pre- and postoperative therapy were recorded. Owners were contacted for follow-up information at a minimum of 6 months following surgery. RESULTS: 13 horses underwent laser fenestration for chronic guttural pouch infection. Thirteen had mucopurulent nasal discharge on presentation, and 3 were coughing. At follow-up, 12 horses treated with transpharyngeal diode laser fenestration had complete resolution of nasal discharge and coughing. One horse, despite resolution of guttural pouch infection on endoscopy, continued to have nasal discharge and coughing attributed to concurrent equine asthma syndrome. All owners expressed satisfaction with the surgical procedure and clinical resolution of guttural pouch infection. CLINICAL RELEVANCE: This surgical technique for transpharyngeal diode laser fenestration of the guttural pouch was uncomplicated to perform and well tolerated in sedated horses and attributed to resolution of clinical signs associated with guttural pouch infection, and owners reported a high satisfaction with the clinical outcome. Implementing this surgical technique could be considered to hasten resolution of chronic guttural pouch disease in horses with few technique-related complications.
Asunto(s)
Empiema , Trompa Auditiva , Enfermedades de los Caballos , Caballos , Animales , Enfermedades de los Caballos/cirugía , Trompa Auditiva/cirugía , Empiema/veterinaria , Endoscopía/veterinariaRESUMEN
Trauma to the soft tissues of the ankle joint distal syndesmosis often leads to syndesmotic instability, resulting in undesired movement of the talus, abnormal pressure distributions, and ultimately arthritis if deterioration progresses without treatment. Historically, syndesmotic injuries have been repaired by placing a screw across the distal syndesmosis to provide rigid fixation to facilitate ligament repair. While rigid syndesmotic screw fixation immobilizes the ligamentous injury between the tibia and fibula to promote healing, the same screws inhibit normal physiologic movement and dorsiflexion. It has been shown that intact screw removal can be beneficial for long-term patient success; however, the exact timing remains an unanswered question that necessitates further investigation, perhaps using animal models. Because of the sparsity of relevant preclinical models, the purpose of this study was to develop a new, more translatable, large animal model that can be used for the investigation of clinical foot and ankle implants. Eight (8) skeletally mature sheep underwent stabilization of the left and right distal carpal bones following transection of the dorsal and interosseous ligaments while the remaining two animals served as un-instrumented controls. Four of the surgically stabilized animals were sacrificed 6 weeks after surgery while the remaining four animals were sacrificed 10 weeks after surgery. Ligamentous healing was evaluated using radiography, histology, histomorphometry, and histopathology. Overall, animals demonstrated a high tolerance to the surgical procedure with minimal complications. Animals sacrificed at 10 weeks post-surgery had a slight trend toward mildly decreased inflammation, decreased necrotic debris, and a slight increase in the healing of the transected ligaments. The overall degree of soft tissue fibrosis/fibrous expansion, including along the dorsal periosteal surfaces/joint capsule of the carpal bones was very similar between both timepoints and often exhibited signs of healing. The findings of this study indicate that the carpometacarpal joint may serve as a viable location for the investigation of human foot and ankle orthopedic devices. Future work may include the investigation of orthopedic foot and ankle medical devices, biologic treatments, and repair techniques in a large animal model capable of providing translational results for human treatment.
RESUMEN
OBJECTIVE: Shoulder pain is commonly attributed to rotator cuff injury or osteoarthritis. Ovine translational models are used to investigate novel treatments aimed at remedying these conditions to prevent articular cartilage degeneration and subsequent joint degradation. However, topographical properties of articular cartilage in the ovine shoulder are undefined. This study investigates the biomechanical, morphological, and biochemical attributes of healthy ovine humeral head articular cartilage and characterizes topographical variations between surface locations. DESIGN: Ten humeral heads were collected from healthy skeletally mature sheep and each was segregated into 4 quadrants using 16 regions of interest (ROIs) across the articular surface. Articular cartilage of each ROI was analyzed for creep indentation, thickness, and sulfated glycosaminoglycan (sGAG) and collagen quantity. Comparisons of each variable were made between quadrants and between ROIs within each quadrant. RESULTS: Percent creep, thickness, and sGAG content, but not collagen content, were significantly different between humeral head quadrants. Subregion analysis of the ROIs within each surface quadrant revealed differences in all measured variables within at least one quadrant. Percent creep was correlated with sGAG (r = -0.32, P = 0.0001). Collagen content was correlated with percent creep (r = 0.32, P = 0.0009), sGAG (r = -0.19, P = 0.049), and thickness (r = -0.19, P = 0.04). CONCLUSIONS: Topographical variations exist in mechanical, morphologic, and biochemical properties across the articular surface of the ovine humeral head. Recognizing this variability in ovine humeral head cartilage will provide researchers and clinicians with accurate information that could impact study outcomes.