Healthy Vaccinee Bias and MenB-FHbp Vaccine Effectiveness Against Gonorrhea.

ABSTRACT: Observational studies demonstrated 30% to 40% effectiveness of outer-membrane vesicle (OMV) meningococcal serogroup B vaccines against gonorrhea. To explore whether healthy vaccinee bias influenced such findings, we examined the effectiveness of MenB-FHbp, a non-OMV vaccine that is not protective against gonorrhea. MenB-FHbp was ineffective against gonorrhea. Healthy vaccinee bias likely did not confound earlier studies of OMV vaccines.

Demographic and Clinical Characteristics of Mpox in Persons Who Had Previously Received 1 Dose of JYNNEOS Vaccine and in Unvaccinated Persons - 29 U.S. Jurisdictions, May 22-September 3, 2022.

As of November 14, 2022, monkeypox (mpox) cases had been reported from more than 110 countries, including 29,133 cases in the United States.* Among U.S. cases to date, 95% have occurred among males (1). After the first confirmed U.S. mpox case on May 17, 2022, limited supplies of JYNNEOS vaccine (Modified Vaccinia Ankara vaccine, Bavarian Nordic) were made available to jurisdictions for persons exposed to mpox. JYNNEOS vaccine was approved by the Food and Drug Administration (FDA) in 2019 as a 2-dose series (0.5 mL per dose, administered subcutaneously) to prevent smallpox and mpox disease.† On August 9, 2022, FDA issued an emergency use authorization to allow administration of JYNNEOS vaccine by intradermal injection (0.1 mL per dose) (2). A previous report on U.S. mpox cases during July 31-September 3, 2022, suggested that 1 dose of vaccine offers some protection against mpox (3). This report describes demographic and clinical characteristics of cases occurring ≥14 days after receipt of 1 dose of JYNNEOS vaccine and compares them with characteristics of cases among unvaccinated persons with mpox and with the vaccine-eligible vaccinated population in participating jurisdictions. During May 22-September 3, 2022, among 14,504 mpox cases reported from 29 participating U.S. jurisdictions,§ 6,605 (45.5%) had available vaccination information and were included in the analysis. Among included cases, 276 (4.2%) were among persons who had received 1 dose of vaccine ≥14 days before illness onset. Mpox cases that occurred in these vaccinated persons were associated with lower percentage of hospitalization (2.1% versus 7.5%), fever, headache, malaise, myalgia, and chills, compared with cases in unvaccinated persons. Although 1 dose of JYNNEOS vaccine offers some protection from disease, mpox infection can occur after receipt of 1 dose, and the duration of protection conferred by 1 dose is unknown. Providers and public health officials should therefore encourage persons at risk for acquiring mpox to complete the 2-dose vaccination series and provide guidance and education regarding nonvaccine-related prevention strategies (4).

Effectiveness of a serogroup B outer membrane vesicle meningococcal vaccine against gonorrhoea: a retrospective observational study.

BACKGROUND: Declining antimicrobial susceptibility to current gonorrhoea antibiotic treatment and inadequate treatment options have raised the possibility of untreatable gonorrhoea. New prevention approaches, such as vaccination, are needed. Outer membrane vesicle meningococcal serogroup B vaccines might be protective against gonorrhoea. We evaluated the effectiveness of a serogroup B meningococcal outer membrane vesicle vaccine (MenB-4C) against gonorrhoea in individuals aged 16-23 years in two US cities. METHODS: We identified laboratory-confirmed gonorrhoea and chlamydia infections among individuals aged 16-23 years from sexually transmitted infection surveillance records in New York City and Philadelphia from 2016 to 2018. We linked gonorrhoea and chlamydia case records to immunisation registry records to determine MenB-4C vaccination status at infection, defined as complete vaccination (two MenB-4C doses administered 30-180 days apart), partial vaccination (single MenB-4C vaccine dose), or no vaccination (serogroup B meningococcal vaccine naive). Using log-binomial regression with generalised estimating equations to account for correlations between multiple infections per patient, we calculated adjusted prevalence ratios (APR) and 95% CIs to determine if vaccination was protective against gonorrhoea. We used individual-level data for descriptive analyses and infection-level data for regression analyses. FINDINGS: Between Jan 1, 2016, and Dec 31, 2018, we identified 167 706 infections (18 099 gonococcal infections, 124 876 chlamydial infections, and 24 731 gonococcal and chlamydial co-infections) among 109 737 individuals linked to the immunisation registries. 7692 individuals were vaccinated, of whom 4032 (52·4%) had received one dose, 3596 (46·7%) two doses, and 64 (<1·0%) at least three doses. Compared with no vaccination, complete vaccination series (APR 0·60, 95% CI 0·47-0·77; p<0·0001) and partial vaccination series (0·74, 0·63-0·88; p=0·0012) were protective against gonorrhoea. Complete MenB-4C vaccination series was 40% (95% CI 23-53) effective against gonorrhoea and partial MenB-4C vaccination series was 26% (12-37) effective. INTERPRETATION: MenB-4C vaccination was associated with a reduced gonorrhoea prevalence. MenB-4C could offer cross-protection against Neisseria gonorrhoeae. Development of an effective gonococcal vaccine might be feasible with implications for gonorrhoea prevention and control. FUNDING: None.

Molecularly Functionalized Electrodes for Efficient Electrochemical Water Remediation.

The development and investigation of materials that leverage unique interfacial effects on electronic structure and redox chemistry are likely to play an outstanding role in advanced technologies for wastewater treatment. Here, the use of surface functionalization of metal oxides with a RuII poly(pyridyl) complex was reported as a way to create hybrid assemblies with optimized electrochemical performance for water remediation, superior to those that could be achieved with the molecular catalyst or metal-oxide electrodes used individually. Mechanistic analysis demonstrated that the molecularly functionalized electrodes could suppress the formation of hydroxyl radicals (i. e., the dominant remediation pathway for bare metal-oxide electrodes), allowing the water remediation to proceed through the highly oxidizing Ru3+ ions in the surface-bound complexes. Furthermore, the underlying metal-oxide substrates played a crucial role in altering the electronic structure and electrochemical properties of the surface-bound catalyst, such that the competing side reaction (i. e., water splitting) was largely inhibited.

Surface immobilized copper(I) diimine photosensitizers as molecular probes for elucidating the effects of confinement at interfaces for solar energy conversion.

Heteroleptic copper(i) bis(phenanthroline) complexes with surface anchoring carboxylate groups have been synthesized and immobilized on nanoporous metal oxide substrates. The species investigated are responsive to the external environment and this work provides a new strategy to control charge transfer processes for efficient solar energy conversion.

Stabilization of Ruthenium(II) Polypyridyl Chromophores on Mesoporous TiO2 Electrodes: Surface Reductive Electropolymerization and Silane Chemistry.

Stabilization is a critical issue in the long term operation of dye-sensitized photoelectrosynthesis cells (DSPECs) for water splitting or CO2 reduction. The cells require a stable binding of the robust molecular chromophores, catalysts, and chromophore/catalyst assemblies on metal oxide semiconductor electrodes under the corresponding (photoelectro)chemical conditions. Here, an efficient stabilization strategy is presented based on functionalization of FTO|nanoTiO2 (mesoporous, nanostructured TiO2 deposited on fluorine-doped tin oxide (FTO) glass) electrodes with a vinylsilane followed by surface reductive electropolymerization of a vinyl-derivatized Ru(II) polypyridyl chromophore. The surface electropolymerization was dominated by a grafting-through mechanism, and rapidly completed within minutes. Chromophore surface coverages were controlled up to three equivalent monolayers by the number of electropolymerization cycles. The silane immobilization and cross-linked polymer network produced highly (photo)stabilized chromophore-grafted FTO|nanoTiO2 electrodes. The electrodes showed significant improvements over structures based on atomic layer deposition and polymer dip-coating stabilization methods in a wide pH range from pH ≈ 1 to pH ≈ 12.5 under both dark and light conditions. Under illumination, with hydroquinone added as a sacrificial electron transfer donor, a photoresponse for sustained electron transfer mediation occurred for at least ∼20 h in a pH ≈ 7.5 phosphate buffer (0.1 M NaH2PO4/Na2HPO4, with 0.5 M NaClO4). The overall procedure provides an efficient way to fabricate highly stabilized molecular assemblies on electrode surfaces with potential applications for DSPECs in solar fuels.

Light-driven water oxidation by a dye-sensitized photoanode with a chromophore/catalyst assembly on a mesoporous double-shell electrode.

A mesoporous atomic layer deposition (ALD) double-shell electrode, Al2O3 (insulating core)//ALD ZnO|ALD TiO2, on a fluorine-doped tin oxide (FTO) conducting substrate was explored for a photoanode assembly, FTO//Al2O3 (insulating core)//ALD ZnO|ALD TiO2|-chromophore-catalyst, for light-driven water oxidation. Photocurrent densities at photoanodes based on mesoporous ALD double-shell (ALD ZnO|ALD TiO2|) and ALD single-shell (ALD ZnO|, ALD TiO2|) electrodes were investigated for O2 evaluation by a generator-collector dual working electrode configuration. The high photocurrent densities obtained based on the mesoporous ALD ZnO|ALD TiO2 photoanode for O2 evolution arise from a significant barrier to back electron transfer (BET) by the optimized tunneling barrier in the structure with the built-in electric field at the ALD ZnO|ALD TiO2 interface. The charge recombination is thus largely decreased. In the films, BET following injection has been investigated through kinetic nanosecond transient absorption spectra, and the results of energy band analysis are used to derive insight into the internal electronic structure of the electrodes.

Stable Molecular Surface Modification of Nanostructured, Mesoporous Metal Oxide Photoanodes by Silane and Click Chemistry.

Binding functional molecules to nanostructured mesoporous metal oxide surfaces provides a way to derivatize metal oxide semiconductors for applications in dye-sensitized photoelectrosynthesis cells (DSPECs). The commonly used anchoring groups, phosphonates and carboxylates, are unstable as surface links to oxide surfaces at neutral and high pH, leading to rapid desorption of appended molecules. A synthetically versatile molecular attachment strategy based on initial surface modification with a silyl azide followed by click chemistry is described here. It has been used for the stable installation of surface-bound metal complexes. The resulting surfaces are highly stabilized toward complex loss with excellent thermal, photochemical, and electrochemical stabilities. The procedure involves binding 3-azidopropyltrimethoxysilane (APTMS) to nanostructured mesoporous TiO2 or tin-doped indium oxide (ITO) electrodes by silane attachment followed by azide-terminated, Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reactions with an alkyne-derivatized ruthenium(II) polypyridyl complex. The chromophore-modified electrodes display enhanced photochemical and electrochemical stabilities compared to phosphonate surface binding with extended photoelectrochemical oxidation of hydroquinone for more than ∼6 h with no significant decay.

A Molecular Silane-Derivatized Ru(II) Catalyst for Photoelectrochemical Water Oxidation.

Photoanodes in dye-sensitized photoelectrosynthesis cells integrate molecular chromophore/catalyst assemblies on mesoporous n-type metal oxide electrodes for light-driven water oxidation. One limitation for sustainable photoanodes is the stability of chromophore/catalyst assembly on electrode surfaces for long periods. Progress has been made in stabilizing chromophores based on atomic layer deposition, polymer dip coating, C-C cross-coupling by electropolymerization, and silane surface binding, but little progress has been made on catalyst stabilization. We report here the silane-derivatized catalyst, Ru(bda)(L)2 (bda = 2,2'-bipyridine-6,6'-dicarboxylate, L = 4-(6-(triethoxysilyl)hexyl)pyridine), catalyst 1, which is stabilized on metal oxide electrode surfaces over an extended pH range. A surface stabilization study shows that it maintains its reactivity on the electrode surface toward electrochemical oxidation over a wide range of conditions. Its electrochemical stability on electrode surfaces has been systematically evaluated, and its role as a catalyst for water oxidation has been explored. On surfaces of mesoporous nanostructured core/shell SnO2/TiO2, with a TiO2 stabilized inner layer of the Ru(II) polypyridyl chromophore, [Ru(4,4'-(PO3H2)2bpy)(bpy)2]2+ (RuP2+; bpy = 2,2'-bipyridine), highly efficient photoelectrochemical water oxidation catalysis occurs to produce O2 with a maximum efficiency of ∼1.25 mA/cm2. Long-term loss of catalytic activity occurs with time owing to catalyst loss from the electrode surface by axial ligand dissociation in the high oxidation states of the catalyst.

Stabilized photoanodes for water oxidation by integration of organic dyes, water oxidation catalysts, and electron-transfer mediators.

Stabilized photoanodes for light-driven water oxidation have been prepared on nanoparticle core/shell electrodes with surface-stabilized donor-acceptor chromophores, a water oxidation catalyst, and an electron-transfer mediator. For the electrode, fluorine-doped tin oxide FTO|SnO2/TiO2|-Org1-|1.1 nm Al2O3|-RuP2+-WOC (water oxidation catalyst) with Org1 (1-cyano-2-(4-(diphenylamino)phenyl)vinyl)phosphonic acid), the mediator RuP2+ ([Ru(4,4-(PO3H2)2-2,2-bipyridine)(2,2-bipyridine)2]2+), and the WOC, Ru(bda)(py(CH2)(3or10)P(O3H)2)2 (bda is 2,2-bipyridine-6,6-dicarboxylate with x = 3 or 10), solar excitation resulted in photocurrents of ∼500 µA/cm2 and quantitative O2 evolution at pH 4.65. Related results were obtained for other Ru(II) polypyridyl mediators. For the organic dye PP (5-(4-(dihydroxyphosphoryl)phenyl)-10,15,20-Tris(mesityl)porphyrin), solar water oxidation occurred with a driving force near 0 V.

Completing a Charge Transport Chain for Artificial Photosynthesis.

A ruthenium polypyridyl chromophore with electronically isolated triarylamine substituents has been synthesized that models the role of tyrosine in the electron transport chain in photosystem II. When bound to the surface of a TiO2 electrode, electron injection from a Ru(II) Metal-to-Ligand Charge Transfer (MLCT) excited state occurs from the complex to the electrode to give Ru(III). Subsequent rapid electron transfer from the pendant triarylamine to Ru(III) occurs with an observed rate constant of ∼1010 s-1, which is limited by the rate of electron injection into the semiconductor. Transfer of the oxidative equivalent away from the semiconductor surface results in dramatically reduced rates of back electron transfer, and a long-lived (τ = ∼165 µs) triarylamine radical cation that has been used to oxidize hydroquinone to quinone in solution.

Controlling Vertical and Lateral Electron Migration Using a Bifunctional Chromophore Assembly in Dye-Sensitized Photoelectrosynthesis Cells.

Integration of photoresponsive chromophores that initiate multistep catalysis is essential in dye-sensitized photoelectrosynthesis cells and related devices. We describe here an approach that incorporates a chromophore assembly surface-bound to metal oxide electrodes for light absorption with an overlayer of catalysts for driving the half-reactions of water splitting. The assembly is a combination of a core-twisted perylene diimide and a ruthenium polypyridyl complex. By altering the connection sequence of the two subunits in the assembly, in their surface-binding to either TiO2 or NiO, the assembly can be tuned to convert visible light into strongly oxidizing equivalents for activation of an electrodeposited water oxidation catalyst (NiCo2O x) at the photoanode, or reducing equivalents for activation of an electrodeposited water reduction catalyst (NiMo0.05S x) at the photocathode. A key element in the design of the photoelectrodes comes from the synergistic roles of the vertical (interlayer) charge transfer and lateral (intralayer) charge hopping in determining overall cell efficiencies for photoelectrocatalysis.

Interfacial Deposition of Ru(II) Bipyridine-Dicarboxylate Complexes by Ligand Substitution for Applications in Water Oxidation Catalysis.

Water oxidation is a critical step in artificial photosynthesis and provides the protons and electrons used in reduction reactions to make solar fuels. Significant advances have been made in the area of molecular water oxidation catalysts with a notable breakthrough in the development of Ru(II) complexes that use a planar "bda" ligand (bda is 2,2'-bipyridine-6,6'-dicarboxylate). These Ru(II)(bda) complexes show lower overpotentials for driving water oxidation making them ideal for light-driven applications with a suitable chromophore. Nevertheless, synthesis of heterogeneous Ru(II)(bda) complexes remains challenging. We discuss here a new "bottom-up" synthetic method for immobilizing these catalysts at the surface of a photoanode for use in a dye-sensitized photoelectrosynthesis cell (DSPEC). The procedure provides a basis for rapidly screening the role of ligand variations at the catalyst in order to understand the impact on device performance. The best results of a water-oxidation DSPEC photoanode based on this procedure reached 1.4 mA/cm2 at pH 7 in 0.1 M [PO4H2]-/[PO4H]2-solution with minimal loss in catalytic behavior over 30 min, and produced an incident photon to current efficiency (IPCE) of 24.8% at 440 nm.

Water Photo-oxidation Initiated by Surface-Bound Organic Chromophores.

Organic chromophores can be synthesized by established methods and offer an opportunity to expand overall solar spectrum utilization for dye-sensitized photoelectrosynthesis cells. However, there are complications in the use of organic chromophores arising from the instability of their oxidized forms, the inability of their oxidized forms to activate a water oxidation catalyst, or the absence of a sufficiently reducing excited state for electron injection into appropriate semiconductors. Three new triarylamine donor-acceptor organic dyes have been investigated here for visible-light-driven water oxidation. They offer highly oxidizing potentials (>1 V vs NHE in aqueous solution) that are sufficient to drive a water oxidation catalyst and excited-state potentials (∼-1.2 V vs NHE) sufficient to inject into TiO2. The oxidized form of one of the chromophores is sufficiently stable to exhibit reversible electrochemistry in aqueous solution. The chromophores also have favorable photophysics. Visible-light-driven oxygen production by an organic chromophore for up to 1 h of operation has been demonstrated with reasonable faradaic efficiencies for measured O2 production. The properties of organic chromophores necessary for successfully driving water oxidation in a light-driven system are explored along with strategies for improving device performance.

Place Still Matters: Racial/Ethnic and Geographic Disparities in HIV Transmission and Disease Burden.

Neighborhood-level structural interventions are needed to address HIV/AIDS in highly affected areas. To develop these interventions, we need a better understanding of contextual factors that drive the pandemic. We used multinomial logistic regression models to examine the relationship between census tract of current residence and mode of HIV transmission among HIV-positive cases. Compared to the predominantly white high HIV prevalence tract, both the predominantly black high and low HIV prevalence tracts had greater odds of transmission via injection drug use and heterosexual contact than male-to-male sexual contact. After adjusting for current age, gender, race/ethnicity, insurance status, and most recently recorded CD4 count, there was no statistically significant difference in mode of HIV transmission by census tract. However, heterosexual transmission and injection drug use remain key concerns for underserved populations. Blacks were seven times more likely than whites to have heterosexual versus male-to-male sexual contact. Those who had Medicaid or were uninsured (versus private insurance) were 23 and 14 times more likely, respectively, to have injection drug use than male-to-male sexual contact and 10 times more likely to have heterosexual contact than male-to-male sexual contact. These findings can inform larger studies for the development of neighborhood-level structural interventions.

Layer-by-Layer Molecular Assemblies for Dye-Sensitized Photoelectrosynthesis Cells Prepared by Atomic Layer Deposition.

In a dye sensitized photoelectrosynthesis cell (DSPEC), the relative orientation of the catalyst and chromophore plays an important role in determining the device efficiency. Here we introduce a new, robust atomic layer deposition (ALD) procedure for the preparation of molecular chromophore-catalyst assemblies on wide bandgap semiconductors. In this procedure, solution deposited, phosphonate derivatized metal complexes on metal oxide surfaces are treated with reactive metal reagents in the gas phase by ALD to form an outer metal ion bridging group, which can bind a second phosphonate containing species from solution to establish a R1-PO2-O-M-O-PO2-R2 type surface assembly. With the ALD procedure, assemblies bridged by Al(III), Sn(IV), Ti(IV), or Zr(IV) metal oxide units have been prepared. To evaluate the performance of this new type of surface assembly, intra-assembly electron transfer was investigated by transient absorption spectroscopy, and light-driven water splitting experiments under steady-state illumination were conducted. A SnO2 bridged assembly on SnO2/TiO2 core/shell electrodes undergoes light-driven water oxidation with an incident photon to current efficiency (IPCE) of 17.1% at 440 nm. Light-driven water reduction with a ruthenium trisbipyridine chromophore and molecular Ni(II) catalyst on NiO films was also used to produce H2. Compared to conventional solution-based procedures, the ALD approach offers significant advantages in scope and flexibility for the preparation of stable surface structures.

Plasmon-enhanced light-driven water oxidation by a dye-sensitized photoanode.

Dye-sensitized photoelectrosynthesis cells (DSPECs) provide a flexible approach for solar water splitting based on the integration of molecular light absorption and catalysis on oxide electrodes. Recent advances in this area, including the use of core/shell oxide interfacial structures and surface stabilization by atomic layer deposition, have led to improved charge-separation lifetimes and the ability to obtain substantially improved photocurrent densities. Here, we investigate the introduction of Ag nanoparticles into the core/shell structure and report that they greatly enhance light-driven water oxidation at a DSPEC photoanode. Under 1-sun illumination, Ag nanoparticle electrodes achieved high photocurrent densities, surpassing 2 mA cm-2 with an incident photon-to-current efficiency of 31.8% under 450-nm illumination.

Antiretroviral Prescription and Viral Suppression in a Representative Sample of HIV-Infected Persons in Care in 4 Large Metropolitan Areas of the United States, Medical Monitoring Project, 2011-2013.

BACKGROUND: Comparisons of antiretroviral therapy (ART) prescription and viral suppression among people in HIV care across US metropolitan areas are limited. Medical Monitoring Project, 2011-2013, data were used to describe and compare associations between sociodemographics and ART prescription and viral suppression for persons receiving HIV care. SETTING: Chicago, Los Angeles County (LAC), Philadelphia, and San Francisco in the United States. METHODS: Bivariate and multivariable methods were used. RESULTS: The proportion of patients prescribed ART (91%-93%) and virally suppressed (79%-88%) was consistent although more persons were virally suppressed in San Francisco compared with the other areas, and a smaller proportion was virally suppressed in Philadelphia compared with Chicago. In the combined cohort, persons aged 30-49 years were less likely than persons 50+ (adjusted prevalence ratio (aPR) -0.97, confidence interval (CI): 0.94 to 0.99); persons reporting non-injection drug use were less likely than non-users (aPR = 0.94, CI: 0.90 to 0.98); and Hispanics were more likely than whites (aPR - 1.04, CI: 1.01 to 1.08) to be prescribed ART. Blacks (aPR = 0.93; CI: 0.87 to 0.99) and homeless persons (aPR = 0.87; CI: 0.80 to 0.95) were less likely to be virally suppressed in the combined cohort. In LAC, persons aged 30-49 years were less likely than those 50+ to be prescribed ART (aPR = 0.94, CI: 0.90 to 0.98). Younger persons (18-29) (aPR = 0.77; CI: 0.60 to 0.99) and persons with less than a high school education (aPR = 0.80; CI: 0.67 to 0.95) in Philadelphia, blacks (aPR = 0.90; CI: 0.83 to 0.99) and men who have sex with women only (aPR = 0.89; CI: 0.80 to 0.99) in Chicago, and homeless individuals in LAC (aPR = 0.80; CI: 0.67 to 0.94) were less likely to be virally suppressed. CONCLUSION: Data highlight the need to increase ART prescription to achieve viral suppression among younger persons, noninjection drug users, blacks, and homeless persons in US metropolitan areas and underscores the importance of region-specific strategies for affected subgroups.

Cationic Copper Hydride Clusters Arising from Oxidation of (Ph3P)6Cu6H6.

Transfer of the first electron from (Ph3P)6Cu6H6 to Cp*2Fe+ is fast (k > 106 L·mol-1·s-1). Transfer of a second electron to the same oxidant has a much lower thermodynamic driving force and is considerably slower, with k = 9.29(4) × 103 L·mol-1·s-1. The second oxidation leads to the formation of [(Ph3P)6Cu6H5]+. The structure of [(Ph3P)6Cu6H5]+ has been confirmed by its conversion back to (Ph3P)6Cu6H6 and by microanalysis; X-ray diffraction shows that the complex is a bitetrahedron in the solid state. [(Ph3P)6Cu6H5]+ can also be prepared by treating (Ph3P)6Cu6H6 with MeOTf. With less than 1 equiv of Cp*2Fe+ as oxidant, (Ph3P)6Cu6H6 gives [(Ph3P)7Cu7H6]+ as the major product; X-ray diffraction shows a Cu6 octahedron with one face capped by an additional Cu. [(Ph3P)7Cu7H6]+ can also be prepared by treating (Ph3P)6Cu6H6 with [Cu(CH3CN)4]+ (along with 1 equiv of Ph3P), and can be converted back to (Ph3P)6Cu6H6 with base/H2.