Prevalence of and risk factors for HCV among incarcerated people at Great Tehran Prison: a cross-sectional study.

PURPOSE: Hepatitis C is one of the major health issues in both developed and developing countries. Hepatitis C virus (HCV) infection is more common in prisoners than in the general population. The purpose of this study was to determine the prevalence of HCV and its associated risk factors in Iranian male prisoners in Tehran. DESIGN/METHODOLOGY/APPROACH: In this cross-sectional study, the authors investigated the frequency and risk factors of hepatitis C infection among male prisoners in the Great Tehran Prison. Information on risk factors including the length of imprisonment, previous history of imprisonment, history of drug injection, history of tattooing, history of piercing, history of high-risk sex and family history of hepatitis C were extracted from patients' records. To evaluate HCV status, blood samples were collected and tested. FINDINGS: In this study, 179 participants were included. Nine participants (5.0%, 95% CI, 2.3-9.3) were positive for hepatitis C. HCV infection was not significantly associated with age, marital status, education, previous history of imprisonment, length of imprisonment, piercing and high-risk sex; however, there was a significant association between a history of tattooing and a history of injecting drug use and Hepatitis C. ORIGINALITY/VALUE: The prevalence of hepatitis C among male prisoners in Great Tehran Prison was 5% in this study, similar to recent studies on prisoners in Tehran. A history of drug injections as well as tattooing were the most important risk factors for hepatitis C in male prisoners.

Evaluation of the effect of the photobiomodulation therapy on the pain related to dental injections: A preliminary clinical trial.

BACKGROUND: Pain from dental injections is a common reason why people fear dentistry and avoid dental treatment. Thus, researchers have attempted to find methods to decrease dental injection pain. OBJECTIVES: Considering the analgesic effect of the photobiomodulation therapy (PBMT), the aim of this study was to evaluate the effects of PBMT on the pain caused by dental anesthetic injections. MATERIAL AND METHODS: This randomized, split-mouth, triple-blind clinical trial evaluated 60 bilateral canine teeth in 30 dental students. After the random selection of the test (laser) quadrant, the injection site was irradiated with a 940 nm diode laser. Buccal infiltration anesthesia was then administered by injecting lidocaine plus epinephrine with a short needle. The level of pain experienced during the injection was determined using a 100-millimeter visual analog scale (VAS). The same procedure was performed for the control (no laser) quadrant, with the difference being that the laser handpiece was turned on, but no radiation was administered. The 2 groups were compared using the non-parametric Wilcoxon signed-rank test. RESULTS: The mean VAS pain scores were 21.2 ±15.7 for the laser quadrant and 27.9 ±18.9 for the control quadrant; this difference was statistically significant (p = 0.030), but did not seem to be clinically relevant. CONCLUSIONS: The photobiomodulation therapy prior to dental anesthetic injections has no clinical advantage for reducing injection pain.

In vitro Effect of 810 nm and 940 nm Diode Laser Irradiation on Proliferation of Human Gingival Fibroblasts and Expression of Procollagen Gene.

Factors promoting fibroblast proliferation and collagen synthesis can subsequently enhance wound healing. This study aimed to assess the effect of 810 and 940 nm diode laser on fibroblast proliferation and procollagen gene expression. In this study, human gingival fibroblasts were cultured in Dulbecco's modified Eagle's medium and underwent 810 and 940 nm diode laser irradiation once, twice, thrice and four times at 1, 3, 5 and 7 days after culture. The methyl thiazolyl tetrazolium assay was performed to assess the proliferation while the real-time polymerase chain reaction was performed to assess the expression of procollagen gene at the mRNA level. We applied two-way ANOVA and Tukey's test for analysis. Wavelength had no significant effect on the proliferation of gingival fibroblasts, but increasing the number of irradiation sessions of both wavelengths increased the proliferation of human gingival fibroblasts. Significant differences were noted in the number of human gingival fibroblasts between groups irradiated 1 and 4 and also 2 and 4 times. Procollagen gene was well expressed in all groups but its expression was significantly higher in 940 nm laser group after four irradiation cycles. Four times radiation of 940 nm laser seems to be more effective than all others.

The Effect of Low-level Laser Therapy on VEGF, IL-6 Expression and Viability of Oral Squamous Cell Carcinoma Cells.

Low-level laser therapy has shown successful results in the prevention and treatment of oral mucositis. One of the concerns about low-level lasers is their effects on remaining malignant cells in the area. Interleukin-6 is a multifunctional cytokine that plays an important role in a wide range of biological activities in increasing tumor functions, decreasing survival and resistance to chemo-radiotherapy. Vascular-endothelial growth factor increases tumor vascularization. It has been shown in the previous studies that LLLT can cause an increase of IL-6 and VEGF in some cells. The present thesis aims to study the effects of LLLT on IL-6 and VEGF expression, as well as cell viability on OSCC cells. Tumorigenic cells of an oral squamous cell carcinoma cell line were irradiated with 3 different diode lasers, and were compared to the control group (660 nm-200 mW-4 J cm-2 , 810 nm-200 mW-4 J cm-2 , 940 nm-200 mW-4 J cm-2 ). MTT assay, ELISA and RT-PCR were used to measure cell viability, IL-6 and VEGF expression. Cell viability of all laser-irradiated groups was significantly lower than the control group. VEGF expression increased in laser-irradiated groups. This was only significant in the 810 nm group. IL-6 protein secretion was significantly higher in all laser-irradiated groups compared to the control group.

Global, regional, and national quality of care of ischaemic heart disease from 1990 to 2017: a systematic analysis for the Global Burden of Disease Study 2017.

AIMS: By 2030, we seek to reduce premature deaths from non-communicable diseases, including ischaemic heart disease (IHD), by one-third to reach the sustainable development goal (SDG) target 3.4. We aimed to investigate the quality of care of IHD across countries, genders, age groups, and time using the Global Burden of Diseases Study (GBD) 2017 estimates. METHODS AND RESULTS: We did a principal component analysis on IHD mortality to incidence ratio, disability-adjusted life-years (DALYs) to prevalence ratio, and years of life lost to years lived with disability ratio using the results of the GBD 2017. The first principal component was scaled from 0 to 100 and designated as the quality of care index (QCI). We evaluated gender inequity by the gender disparity ratio (GDR), defined as female to male QCI. From 1990 to 2017, the QCI and GDR increased from 71.2 to 76.4 and from 1.04 to 1.08, respectively, worldwide. In the study period, countries of Western Europe, Scandinavia, and Australasia had the highest QCIs and a GDR of 1 to 1.2; however, African and South Asian countries had the lowest QCIs and a GDR of 0.8 to 1. Moreover, the young population experienced more significant improvements in the QCI compared to the elderly in 2017. CONCLUSION: From 1990 to 2017, the QCI of IHD has improved; nonetheless, there are remarkable disparities between countries, genders, and age groups that should be addressed. These findings may guide policymakers in monitoring and modifying our path to achieve SDGs.

Comparison between the Effect of 810 nm and 940 nm Diode Laser Irradiation on Histopathological Changes in Iatrogenic Oral Ulcers: an Animal Study.

STATEMENT OF THE PROBLEM: Considering the relatively high prevalence of oral mucosal ulcers, their fast healing is of significance. PURPOSE: This study aimed to histopathologically compare the effects of 810 nm and 940 nm diode laser on the healing of iatrogenic oral ulcers in rabbits. MATERIALS AND METHOD: In this single-blind experimental study, mucosal ulcers measuring 3mm in diameter and 1mm in depth were bilaterally created in the buccal mucosa of 18 rabbits using a biopsy punch. The defects were irradiated with 810 nm diode laser on the right side and 940 nm diode laser on the left side. Biopsy samples of the same depth were obtained from the ulcers on days 3 and 7 followed by histopathological analysis. The intensity of inflammation was determined on hematoxylin-eosin-stained sections using a four-point scale. Data were analyzed employing the Wilcoxon signed rank test. RESULTS: The degree of inflammation was not significantly different between the 810nm and 940nm diode laser groups on day 3; but on day 7, animals receiving 810 nm experienced a significantly lower degree of inflammation compared to those treated with 940 nm laser (p= 0.028). CONCLUSION: When comparing 810- and 940-nm diode lasers, 810 nm irradiation significantly decreased the severity of inflammation in oral wounds created on the buccal mucosa of rabbits in a time-dependent manner.

The Effect of Laser Bio-modulation on Dysplastic Lesions, an Animal Study.

Potentially malignant disorders are one of the clinical challenges. Dysplasia in these lesions can be a predictor of more potential for malignant changes. Photo-bio-modulation in benign lesions has advantages, but there is doubt on its safety in potentially malignant lesions. This study aims to assess if low-level laser can promote dysplastic changes while the method can play an important role in management of dysplastic lesions. Dysplasia was induced on anterior wall of the buccal pouch of 80 young Syrian male hamsters. Then, hamsters were divided to four groups to receive 4 and 12 sessions irradiation of 660 and 810 nanometers low-level lasers. For histopathologic study of the tissue, we used light microscopes. Using SPSS, data were analyzed via Wilcoxon signed rank test and Mann-Whitney U-test. In all of our four groups, the severity of dysplasia had no statistical difference in study sides comparing with their own controls. Wavelength and numbers of laser irradiation sessions had no statistically meaningful effect on the severity of dysplasia either. Low-level lasers appear to show no relevant or significant effect over the aggravation of the dysplasia's severity. Neither the wavelength nor the number of sessions appear to have any impact in the results.

Neck circumference and metabolic syndrome: A cross-sectional population-based study.

OBJECTIVES: This study aimed to investigate the possible association of neck circumference with cardiometabolic risk factors, and to find out the possible cutoff points of neck circumference for the diagnosis of metabolic syndrome among the Iranian population. METHOD: This is a cross-sectional study in 1619 participants who were selected through clustered random sampling, as a part of a health cohort in Amol, Iran. Diagnosis of metabolic syndrome (MetS) was based on the modified criteria of the National Cholesterol Educational Program Adult Treatment Panel (NCEP ATP III). Associations of neck circumference with Mets and its components were studied using logistic regression. The optimal cutoff point of neck circumference for MetS diagnosis was calculated based on the Youden index. RESULTS: Metabolic syndrome was diagnosed in 433 (26.7%) of patients. Neck circumference was shown to be significantly associated with central obesity, hypertension, hypertriglyceridemia, impaired fasting glucose, and low serum high-density lipoprotein (HDL) level, as well as MetS. The optimal cutoff points of neck circumference in the diagnosis of MetS are 36 cm and 42 cm for women and men, respectively. Sensitivity of the optimal cut-off point of NC for diagnosing patients with MetS was higher in women compared to men (70.6% compared to 55.9%). CONCLUSION: A significant association was observed between neck circumference and the presence of MetS among the Iranian population and neck circumference can be offered as a new index in screening and diagnosis for MetS and assessing cardiometabolic risk factors.

Effects of 660 nm and 810 nm Low-Power Diode Laser on Proliferation and Invasion of Oral Cancer Cells in Cell Culture Media.

In the present study, the effects of 660 and 810 nm diode laser on the proliferation and invasion of cancer cells were investigated. Sixteen plates of oral cancer cells originated from tongue SCC were irradiated with diode laser at 660 nm (40 and 80 mW) and 810 nm (100 and 200 mW) with the energy density of 4 J cm-2 . One plate received no irradiation (the control). Irradiation was performed at four times (0, 24, 72 and 168 h). Cell proliferation was measured by MTT assay. The Ki67 and vascular endothelial growth factor (VEGF) markers were examined by real-time polymerase chain reaction (RT-PCR). Cyclin D1, E-cadherin, ß-catenin and matrix metalloproteinase-9 (MMP-9; flow cytometry) were also evaluated. Proliferation was lower in the irradiated groups. This result was significant for all groups at 24 h. The percentages of cyclin D1 and MMP-9 were higher in 810 nm groups, ß-catenin and E-cadherin were higher in 660 nm groups, VEGF marker was significantly lower in 810 nm/200 mW group, and Ki67 marker has no difference between the groups. According to the results of this study, laser irradiation at 0 and 24 h resulted in a significant inhibitory effect on cell proliferation especially in 660 nm/80 mW and 810 nm/200 mW. Further studies are needed in this respect.

Efficacy of Low-Level Laser, Hard Occlusal Appliance and Conventional Pharmacotherapy in the Management of Myofascial Pain Dysfunction Syndrome; A Preliminary Study.

Introduction: Myofascial pain dysfunction syndrome (MPDS) is a common temporomandibular joint disorder. Due to its multifactorial etiology, treatment usually involves more than one modality to obtain complementary results. The purpose of this study was to compare the combined effect of a low-level laser, a hard occlusal appliance, and conventional pharmacotherapy with pharmacotherapy only in the management of patients with MPDS. Methods: In this study, 15 patients with MPDS were diagnosed and randomly assigned to 3 groups (n=5). Subjects in Group 1 were treated with pharmacotherapy (PT); Group 2 received the diode laser (940 nm gallium arsenide) every other day for a total of 10 sessions, plus pharmacotherapy (PTL) and Group 3 were given hard occlusal splint 12 h/day for 4 weeks, plus pharmacotherapy (PTO). The intensity of pain was measured using the visual analog scale (VAS) prior to the treatment, 2 and 4 weeks after the onset of treatment and 2 weeks later. The maximum painless mouth opening and pain intensity at muscle palpation were also recorded. Comparisons were made between the groups via repeated measure analysis of variance (ANOVA) (P<0.05). Results: Pain relief in the subjective VAS was observed in both laser and appliance groups in the third and fourth examination sessions (P<0.05). No statistically significant reduction in pain was noted using pharmacotherapy only. The maximum painless mouth opening and muscle tenderness were not significantly different between the 3 groups (P>0.05). Conclusion: Both the laser and the occlusal appliance combined with pharmacotherapy proved to be effective for pain reduction in patients with MPDS. All groups, however, failed to result in a significant improvement in the maximum mouth opening or tenderness in masticatory muscles.

Debonding Time and Dental Pulp Temperature With the Er, Cr: YSGG Laser for Debonding Feldespathic and Lithium Disilicate Veneers.

Introduction: The removal of ceramic veneers is a time-consuming procedure in a dental office. Little research has been done in alternative removal techniques for ceramic veneers. The objective of this study was to evaluate the removal of feldspathic and lithium disilicate reinforced glass ceramic veneers by Er, Cr: YSGG and to measure debonding time and pulpal temperature increase during veneer removal. Methods: Fifty-seven bovine incisor teeth were prepared and divided into 3 groups. Ceramic specimens with a thickness of 0.7mm, a width of 4mm and a length of 8 mm were fabricated from feldspathic ceramic, lithium disilicate reinforced glass ceramic HT (high translucency) and lithium disilicate reinforced glass ceramic MO (medium opacity) (19 for each group). Specimens were cemented on the labial surface of incisors using resin cement. The Er, Cr: YSGG laser was applied to each specimen at 2.5 W and 25 Hz. Debonding time was measured for each specimen, and the intrapulpal temperature was detected in 3 specimens for each group. Data were analyzed via one-way analysis of variance (ANOVA) at significance level of 0.05 (α = 0.05). Results: Mean debonding time was 103.68 (26.76), 106.58 (47.22) and 103.84 (32.90) seconds for feldspathic, lithium disilicate MO, and lithium disilicate HT respectively. There was no significant statistical difference among the groups (P value = 0.96). The intrapulpal temperature increase was less than 1°C in all groups. Conclusion: Er, Cr: YSGG can successfully be used to efficiently debond feldspathic and lithium disilicate reinforced glass ceramic veneers. There was no significant difference for debonding time among these ceramic materials. During ceramic laminate veneer removal by laser irradiation, no irritating temperature rise was detected.

A Comparative Study of Low-Level Laser Therapy and Transcutaneous Electrical Nerve Stimulation as an Adjunct to Pharmaceutical Therapy for Myofascial Pain Dysfunction Syndrome: A Randomized Clinical Trial.

OBJECTIVES: Myofascial pain dysfunction syndrome (MPDS) is the most common form of temporomandibular disorders. Because of the multifactorial nature of the problem, its management usually involves several treatment modalities to maximize their synergistic effects. This randomized clinical trial aimed to assess the efficacy of low-level laser therapy (LLLT) and transcutaneous electrical nerve stimulation (TENS) as an adjunct to pharmaceutical therapy for treatment of MPDS. MATERIALS AND METHODS: This clinical trial evaluated 108 MPDS patients. First, the initial pain intensity of patients was determined using a visual analogue scale (VAS). The first phase of the study included education, awareness, self-care, behavior and relaxation therapy. After 1 month, the pain score was measured again using VAS. Patients who acquired a pain score >1 were divided into three groups of LLLT with diode (GAAlAr) laser with 0.2 W power, TENS, and control, using block randomization. All groups received 10 mg fluoxetine once daily, 0.25 mg clonazepam once daily and 10 mg baclofen three times a day. ANOVA was used to compare the recovery rate of the three groups. RESULTS: Pain in the trapezius muscle and pain on mouth opening resolved faster in the laser + medication group. The recovery rate was faster in the mean muscle pain, general pain reported by patients, pain in the masseter and pterygoid muscles and pain and limitation in lateral movements in both laser + medication and TENS groups. CONCLUSION: Combination of LLLT and TENS with medication accelerated pain relief and resolved movement restrictions in MPDS patients.(IRCT registration number: IRCT201411113144N4).

A Model for Induction of Dysplasia in Hamster Mucosal Pouch.

Induction of premalignant lesions in animal models is of high value for research purposes. This study aimed to induce dysplasia in hamster mucosal pouch for investigation of dysplastic lesions using dimethylbenz(a)anthracene. The buccal pouch of 10 hamsters was painted with dimethylbenz(a)anthracene for 10 weeks every other day. At 5 and 10 weeks, they underwent histopathological analysis. Clinically, there was no change until week 7; after which mucosal thickening occurred. Hamsters scarified at 5 weeks and 10 weeks demonstrated mild and moderate dysplasia, respectively. dimethylbenz(a)anthracene is a useful tool for inducing dysplastic lesions in the buccal pouch mucosa of hamsters.

National and subnational mortality of urological cancers in Iran, 1990-2015.

PURPOSE: To study trends of urological cancers mortalities in Iran between 1990 and 2015 as a part of a larger project named national and subnational burden of diseases, injuries, and risk factors. METHODS: The primary dataset of this project comprises data of national death registration system. Cause-specific mortality fraction for each age, sex, province, and year group was calculated using a two-stage mixed effects and spatiotemporal models, and then these fractions were applied to all-cause mortality rates, obtained from a parallel study to estimate mortality rates attributable to each cause. RESULTS: In 2015, urological cancers constituted 8% of cancer-related deaths in Iran, and number of deaths due to prostate, bladder, testicular, and kidney and other urinary organs cancers were estimated as 2,128 (1,565-2,891), 297 (230-385), 301 (144-639), and 195 (143-267), respectively. Our estimates show that age-standardized death rates (ASDRs) of these cancers reached 6.8 (5-9.23), 0.47 (0.37-0.61), 0.96 (0.46-2.04), and 0.24 (0.18-0.33) deaths per 100,000 individuals in 2015, a reduction in the three latter cancers, from 4.09 (2.92-5.76), 13.04 (10.04-16.95), 1.23 (0.46-3.34), and 1.76 (1.28-2.42) deaths per 100,000 individuals in 1990, respectively. CONCLUSIONS: In conclusion, despite disparities among different provinces, overall mortality rate of urological cancers decreased significantly since 1990s in Iran.

Repair bond strength of composite: Effect of surface treatment and type of composite.

BACKGROUND: By an increase in use of composite restorations, some defects are also seen in these restorations, which need to be repaired. Since complete replacement of an old restoration may compromise the tooth structure, repair of defect is a more practical approach if there is no caries recurrence. Risk of pulp injury also decreases as such. One major challenge in restoration repair is to obtain a durable bond between the new and old composite. Laser irradiation has been suggested for surface preparation of old composite. This study aimed to assess the effect of composite surface preparation with Er,Cr:YSGG laser on microtensile bond strength to new composite. MATERIAL AND METHODS: A total of 18 blocks were fabricated in three groups of nanohybrid, microhybrid and Beautiful II giomer measuring 4x7x7 mm and subjected to 10,000 thermal cycles between 5-55°C with 30 seconds of dwell time. The samples were randomly assigned to no surface treatment (etching and bonding) or laser plus etching and bonding groups. Composite cylinders measuring 4x7x7 mm were fabricated of Beautiful, nanohybrid and microhybrid composites on old composite surfaces and subjected to 500 thermal cycles for 50 seconds between 5-55°C with 30 seconds of dwell time. Each block was sectioned into 10 samples and they were subjected to microtensile bond strength test. Data were analyzed using ANOVA and Tukey's test. RESULTS: In all composites, the mean bond strength in laser subgroups was higher than that in control subgroups except for giomer, which showed lower bond strength in laser subgroup. The lowest mean bond strength was noted in repair of Z350XT with Z350XT when the surface of old composite was etched (10.92 MPa). The highest mean bond strength was noted in repair of Z250 with giomer when the old composite surface was irradiated with laser (30.55 MPa). CONCLUSIONS: Er,Cr:YSGG laser plus etching increased the bond strength in all groups except for giomer group, which showed a reduction in bond strength. Key words:Composite resins, surface treatment, tensile bond strength, laser, er,cr:ysgg, giomer.

Bond Strength of Fiber Posts to Composite Core: Effect of Surface Treatment With Er,Cr:YSGG Laser and Thermocycling.

Introduction: This study aimed to determine the bond strength of fiber post to composite core following surface treatment with Er,Cr:YSGG laser at different powers and sandblasting with and without thermocycling. Methods: In this experimental study, 30 fiber posts (Glassix, Nordin, Switzerland) were randomly divided into 5 groups of sandblasting, no treatment and laser irradiation at 1, 1.5 and 2 W powers. Following composite filling and mounting, 1-mm thick sections were made for pushout bond strength testing. Half of the samples in each group were subjected to thermocycling (n=15). Two-way analysis of variance (ANOVA) was used to analyze the bond strength values. Pairwise comparisons were made using Tukey test (P<0.05). Results: Effect of treatment method on push-out bond strength of fiber post to composite core was significant (P=0.017), while thermocycling had no significant effect on bond strength (P=0.964). Pairwise comparison of surface treatment methods revealed no significant difference in groups with and without thermocycling (P>0.05), but Er,Cr:YSGG laser irradiation with 1 W power yielded significantly higher bond strength than the control group (P=0.01). Conclusion: Irradiation of Er,Cr:YSGG laser at 1 W power increased the bond strength of fiber post to composite core. Thermocycling slightly decreased the bond strength at the fiber postcore interface.

Therapeutic and Analgesic Efficacy of Laser in Conjunction With Pharmaceutical Therapy for Trigeminal Neuralgia.

Introduction: Trigeminal neuralgia (TN) is the most common neuralgia in the head and neck region and a common cause of orofacial pain. It is routinely treated with carbamazepine. Laser, acupuncture and radiofrequency are among other treatment modalities for this condition. This study sought to assess the efficacy of laser therapy in conjunction with carbamazepine for treatment of TN. Methods: A total of 30 patients who met the inclusion criteria were divided into 2 groups of cases and controls (n=15) by double blind randomized controlled clinical trial. All patients received 100 mg carbamazepine at baseline and another 100 mg after 2 days for pain control. In the case group, low level laser therapy (LLLT) was also performed in addition to pharmaceutical therapy. Sham laser was used in the control group instead of LLLT. Treatment was continued for 9 sessions (3 days a week). The intensity of pain was measured and compared in the 2 groups using visual analog scale (VAS) in 3 period. The qualitative variables among the groups were compared using the repeated measures analysis of variance (ANOVA). Results: The severity of pain was lower at the end of treatment in the case compared to the control group so this difference was statistically significant (P=0.003). The severity of pain decreased in both groups over time. Significant difference was noted in this regard between the 2 groups either (P=0.003). At the end of treatment pain intensity dropped in the intervention group from 6/8 to 1/2 and control group from 6/6 to 2/7. Conclusion: Laser therapy did add to the value of pharmaceutical therapy for treatment of TN. Both groups experienced significant improvement over time. So it is better to used laser complementary therapy to reduce side effects and the medicine dosage.

The association between the number of office visits and the control of cardiovascular risk factors in Iranian patients with type2 diabetes.

INTRODUCTION: Patients with diabetes type2 should receive regular medical care. We aimed at investigating the association between the number of office visits and improvement of their cardiovascular-risk factors. METHODS: Four hundred and ninety patients with type 2 diabetes mellitus who were followed in a tertiary center were enrolled in this longitudinal study. The minimum follow up period was 3 years. Patient data were extracted from manual or electronic records. RESULTS: Sixty- four percent of cases were females, the mean age was 61 ± 12.45 years, and the mean disease duration was 6.5 ±7.9 years. The mean number of office visits was 2.69 ± 0.91 per year. Comparing the means of each of the cardio-vascular risk factors showed a significant decrease in all cardiovascular risk factors, while there was a significant weight gain over the same period. The association between changes in these parameters and the number of patients' office visits per year were not statistically significant. In patients with disease duration less than 5 years, each additional office visits by one visit per year was associated with a decrease in serum total cholesterol by 6.94 mg/dl. The mean number of office visits per year in patients older than 60 years old was more than younger patient (p = 0.001). CONCLUSION: The decrease in the mean values of the investigated parameters was statistically significant between the first year of follow up and the following years. Yet, these changes were not related to the mean number of patients' office visits per year, which may reflect the poor compliance of patients to treatment regardless of the number of their office visits.

Clinical Evaluation of High and Low-Level Laser Treatment (CO2vsInGaAlP Diode Laser) for Recurrent Aphthous Stomatitis.

STATEMENT OF THE PROBLEM: Recurrent aphthous stomatitis (RAS) is one of the most common lesions in the oral cavity. Due to its multifactorial nature, there is no definitive treatment for RAS. Laser therapy is one of the suggested treatments to reduce patient's discomfort. PURPOSE: The purpose of the present clinical trial is to assess the effect of low and high level laser therapy on pain control and wound healing of RAS. MATERIALS AND METHOD: Thirty six patients with minor RAS were divided into three groups. Group 1 (n=14) received CO2 laser, group 2 (n=12) were treated with InGaAlP Diode laser and group 3 (n=10) received sham laser as placebo. All patients were evaluated daily up to 15 days after receiving one session of laser therapy. Pain severity before and after treatment, wound healing, patient's satisfaction, and functional disturbance before and after treatment were recorded for each patient. RESULTS: According to statistical analysis, pain reduction after treatment in group 1 was 7.00±2.41, in group 2 was 2.08±2.31, and in group 3 was 1.40±1.77. In addition, a significant difference was observed in the reduction of functional complications in CO2 laser treated patients compared to the other two groups. CONCLUSION: High-level laser treatment showed analgesic effects on RAS, but no healing was observed. Low-level laser therapy demonstrated no positive effect on recurrent aphthous ulcers.

Microshear bond strength of self-adhesive composite to ceramic after mechanical, chemical and laser surface treatments.

OBJECTIVES: This study aimed to assess the microshear bond strength of a repairing self-adhesive flowable composite to ceramic after mechanical, chemical and laser treatment of the ceramic surface. MATERIALS AND METHODS: Forty zirconia and forty feldspathic ceramic blocks measuring 8 x 8 x 2 mm were fabricated. Feldspathic blocks were divided into four groups of control (1), laser (2780 nm) (2), sandblasting + hydrofluoric (HF) acid + silane (3) and laser (2780 nm) + HF acid + silane (4). Zirconia blocks were also divided into four groups of control (1), laser (2780 nm) (2), sandblasting + Z-Prime Plus (3) and laser (2780 nm) + Z-Prime Plus (4). Vertise Flow composite was bonded to treated ceramic surfaces as a repairing material, then the samples were subjected to 1000 thermal cycles. Repair bond strength was measured by Instron machine and data were analyzed using one-way ANOVA and post hoc test (P < 0.05). RESULTS: Maximum and minimum bond strength values were observed in zirconia-control (22.57 ± 4.76 MPa) and feldspathic-control (8.65 ± 6.41 MPa) groups, respectively. There was no significant differences between subgroups within the zirconia or feldspathic groups (P > 0.05), however the bond strength of zirconia subgroups was significantly higher than that of feldspathic subgroups. CONCLUSION: Vertise Flow provides relatively good bond strength to ceramic even with no surface treatment.