Spark Discharge Synthesis and Characterization of Ge/Sn Janus Nanoparticles.

Germanium-tin nanoparticles are promising materials for near- and mid-infrared photonics thanks to their tunable optical properties and compatibility with silicon technology. This work proposes modifying the spark discharge method to produce Ge/Sn aerosol nanoparticles during the simultaneous erosion of germanium and tin electrodes. Since tin and germanium have a significant difference in the potential for electrical erosion, an electrical circuit damped for one period was developed to ensure the synthesis of Ge/Sn nanoparticles consisting of independent germanium and tin crystals of different sizes, with the ratio of the atomic fraction of tin to germanium varying from 0.08 ± 0.03 to 0.24 ± 0.07. We investigated the elemental and phase composition, size, morphology, and Raman and absorbance spectra of the nanoparticles synthesized under different inter-electrode gap voltages and the presence of additional thermal treatment directly in a gas flow at 750 °C. The research shows that the in-flow thermal treatment of aerosol-agglomerated nanoparticles produced special individual bicrystalline Janus Ge/Sn nanoparticles with an average size of 27 nm and a decreasing absorption function with a changing slope at 700 nm.

L-Cysteine and N-acetyl-L-cysteine-mediated synthesis of nanosilver-based sols and hydrogels with antibacterial and antibiofilm properties.

The need of the synthesis of a new generation of medicines aimed at combating bacteria and biofilms that cause various infections is a great urgency. There has been a gradual decrease in the conventional techniques of treatment with the use of antibiotics. Consequently, much effort has focused on the search for new methods and approaches to obtain antibacterial drugs and determine their rational use such that microorganisms do not acquire resistance. Although silver nanoparticles (AgNPs) and silver nanoclusters (AgNCs) have exhibited certain levels of effectiveness against multidrug-resistant bacteria and biofilms, there are very few simple, cheap and easy-to-scale methods to obtain AgNPs and AgNCs with well-desired characteristics. In this study, we carried out the one-pot synthesis of sols and gels containing AgNPs and AgNCs using only L-cysteine (CYS) or N-acetyl-L-cysteine (NAC), as bioreducing/capping/gel-forming agents, and different silver salts - nitrate, nitrite and acetate. HRTEM, SAED, EDX mapping, AFM, SEM, EDX, ICP-MS and FTIR spectroscopy analysis confirmed the formation of spherical/elliptical CYS-AgNP and NAC-AgNC particles consisting of AgNPs or AgNCs "core" and CYS/Ag+ or NAC/Ag+ complexes "shell" with mean average diameters of 10 and 5 nm, respectively. UV-Vis spectroscopy fixed the localized surface plasmon resonance (LSPR) at 390-420 nm for the CYS-AgNPs systems and LSPR absence for the NAC-AgNCs ones. DLS and nanoparticle tracking analysis (NTA) data indicated that the mean average diameter of the particles is about 80 nm for the CYS-AgNPs systems and 20 nm for the NAC-AgNCs ones. The Zeta potential measurements showed that the particles possess positive and negative charge values for CYS-AgNPs and NAC-AgNCs systems, respectively. The prepared materials demonstrated the high antibacterial activity against the most common types of bacteria at the MIC range of 10-100 µM, wherein the effect of the NAC-AgNCs systems is 2 times stronger than that of the CYS-AgNPs ones. Both systems are non-toxic or have low-toxicity at 300 µM for normal human cells: erytrocytes, fibroblasts and macrophages. Sols and hydrogels in the concentration range of 20-40 µM showed the complete inhibition of the formation of biofilms from Acinetobacter baumannii and Pseudomonas aeruginosa, which belong to the ESKAPE pathogenes group and represent the most serious problem in practical medicine. NAC-AgNCs systems were the most active. The simple strategy of the preparation of AgNP/AgNC-based sols and gels, along with their pronounced antibacterial and antibiofilm activity, could open new perspectives for its applications in medicine.

Ag/α-Ag2MoO4/h-MoO3 nanoparticle based microspheres: synthesis and photosensitive properties.

We report a new and the most simple strategy for the synthesis of silver molybdate functional composite microspheres based on low molecular weight gelators -amino acids, silver salts and heptamolybdate ions. The resulting material shows a high photocatalytic activity with respect to the methylene blue dye degradation at neutral pH.

Optimizing Aerosol Jet Printing Process of Platinum Ink for High-Resolution Conductive Microstructures on Ceramic and Polymer Substrates.

Printing nano-ink with platinum nanoparticles to generate conductive microstructures for electronics on different types of substrates has gained increasing interest in recent years. To solve the problem of the low conductivity of platinum (Pt) nano-ink, we synthesized chemically pure Pt nanoparticles with sizes of 18.2 ± 9.0 nm by spark discharge method. A low toxic solvent, ethylene glycol with water, was used to ensure the aggregation stability of Pt nanoparticles. Polyvinylpyrrolidone was used as an adhesive additive and binder in the nano-ink. Narrow and conductive Pt lines were generated by aerosol jet printing technology. The resistivity of the Pt lines sintered at 750 °C on alumina substrate was found to exceed the bulk Pt by about 13%. Moreover, the Pt film fabricated on polymer substrates has demonstrated excellent mechanical flexibility in terms of twisting tests.

Synthesis of Nanoparticles by Spark Discharge as a Facile and Versatile Technique of Preparing Highly Conductive Pt Nano-Ink for Printed Electronics.

A cost-effective, scalable and versatile method of preparing nano-ink without hazardous chemical precursors is a prerequisite for widespread adoption of printed electronics. Precursor-free synthesis by spark discharge is promising for this purpose. The synthesis of platinum nanoparticles (PtNPs) using a spark discharge under Ar, N2, and air has been investigated to prepare highly conductive nano-ink. The size, chemical composition, and mass production rate of PtNPs significantly depended on the carrier gas. Pure metallic PtNPs with sizes of 5.5 ± 1.8 and 7.1 ± 2.4 nm were formed under Ar and N2, respectively. PtNPs with sizes of 18.2 ± 9.0 nm produced using air consisted of amorphous oxide PtO and metallic Pt. The mass production rates of PtNPs were 53 ± 6, 366 ± 59, and 490 ± 36 mg/h using a spark discharge under Ar, N2, and air, respectively. It was found that the energy dissipated in the spark gap is not a significant parameter that determines the mass production rate. Stable Pt nano-ink (25 wt.%) was prepared only on the basis of PtNPs synthesized under air. Narrow (about 30 µm) and conductive Pt lines were formed by the aerosol jet printing with prepared nano-ink. The resistivity of the Pt lines sintered at 750 °C was (1.2 ± 0.1)·10-7 Ω·m, which is about 1.1 times higher than that of bulk Pt.