Carbon nanomaterials for sweat-based sensors: a review.

Sweat is easily accessible from the human skin's surface. It is secreted by the eccrine glands and contains a wealth of physiological information, including metabolites and electrolytes like glucose and Na ions. Sweat is a particularly useful biofluid because of its easy and non-invasive access, unlike other biofluids, like blood. On the other hand, nanomaterials have started to show promise operation as a competitive substitute for biosensors and molecular sensors throughout the last 10 years. Among the most synthetic nanomaterials that are studied, applied, and discussed, carbon nanomaterials are special. They are desirable candidates for sensor applications because of their many intrinsic electrical, magnetic, and optical characteristics; their chemical diversity and simplicity of manipulation; their biocompatibility; and their effectiveness as a chemically resistant platform. Carbon nanofibers (CNFs), carbon dots (CDs), carbon nanotubes (CNTs), and graphene have been intensively investigated as molecular sensors or as components that can be integrated into devices. In this review, we summarize recent advances in the use of carbon nanomaterials as sweat sensors and consider how they can be utilized to detect a diverse range of analytes in sweat, such as glucose, ions, lactate, cortisol, uric acid, and pH.

Smartphone-based corona virus detection using saliva: A mini-review.

During the ongoing worldwide epidemic, SARS-CoV-2 has infected millions of individuals and taken the lives of numerous victims. It is clear that early detection of infected individuals, especially asymptomatic carriers, is possible with the development of innovative analytical tools for rapid identification of COVID-19 present in nasopharyngeal swabs, serum, and saliva. The saliva, as a diagnostic sample, can be easily collected by the patient with almost no discomfort and needs specialized healthcare personnel to manage, which reduces the risks for the operator. Moreover, smartphone-based sensing systems are one of the most attractive techniques that can speed up the detection time of COVID-19 agents without the need for professional staff and clinical centers. In this review, recent advances in precise salivary-based SARS-CoV-2 diagnosis using smartphones via viral RNA detection, antibody identification, and viral antigen identification were summarized. Finally, the conclusion and future perspective of this field are described in brief.

A flexible and hemostatic chitosan, polyvinyl alcohol, carbon dot nanocomposite sponge for wound dressing application.

For decades, wound healing has been the focus of many researchers around the world, and their final objective is the development of effective approaches capable of accelerating the healing procedure. On the other hand, wound dressings with high flexibility, rapid hemostasis, good biocompatibility, and suitable porosity have received increasing attention. In general, skin trauma with uncontrolled bleeding is one of the main challenges in the management of clinical wounds. In the study, nanocomposite sponges of chitosan (CS)/polyvinyl alcohol (PVA)/carbon dots (CDs) were successfully fabricated by using the freeze-drying method. The physicochemical properties of the prepared nanocomposite sponges were analyzed through Fourier transform infrared spectroscopy, scanning electron microscopy, porosity, water absorption, water vapor transmission rate, and mechanical tests. The results show that the obtained CS/PVA/CDs nanocomposite sponges had high porosity, hydrophilicity, good water absorption capacity, and flexibility. In the following, in vitro cytotoxicity assays, hemolysis, and blood clotting exhibited favorable biocompatibility and nontoxicity. Besides, in vivo hemostatic potential tests on rat tail, liver, and leg injuries indicate that the sponge had high hemostatic efficiency. Taken together, the reported results indicate that the fabricated CS/PVA/CDs nanocomposite sponges could be used as wound dressings.

Incorporation of Saqez essential oil into polyvinyl alcohol/chitosan bilayer hydrogel as a potent wound dressing material.

Nowadays, many studies are conducted on multilayer hydrogels for wound dressing. On the other hand, considering the emergence of bacterial resistance to common antibiotics, studies on the use of natural essential oils and their derivatives that have antibacterial and antioxidant activity can be useful. Herein, a novel bilayer hydrogel developed from polyvinyl alcohol and chitosan with the incorporation of Saqez essential oil (SEO) was synthesized. The results showed a gel-type structure with specific compression and flexibility, while the microscopic images confirmed the formation of a bilayer hydrogel. Further, the data showed that increasing the concentration of SEO reduces the swelling and water vapor permeability and increases the water retention and hydrophobicity of the hydrogel surface. The effects of the combination of SEO in the bilayer hydrogel led to a strong antioxidant property and increased antimicrobial activity. Also, the in vitro results demonstrated that the bilayer hydrogels are biocompatible, non-toxic, and blood compatible. Finally, the results of the in vivo tests showed that these bilayer hydrogels had good homeostatic efficiency. Overall, the obtained results indicate that these bilayer hydrogels are promising candidates for wound dressing.

Smartphone-based wound dressings: A mini-review.

In spite of remarkable progress in the field of wound curation, treatment of chronic wounds remains a challenge for medical services. The constant rise in the number of patients with chronic wounds and their related financial burden has caused concern for the healthcare system. The complicated and dynamic nature of chronic wounds has increased the curation time and difficulty of wound healing with conventional bandages. Efficient healing of these wounds requires new bandages with the ability of real-time monitoring, data analysis, and drug delivery, which protect the wound against infection and accelerate the treatment process. The recent development of smartphone applications and digital equipment in medicine provides an opportunity for significant improvement in wound care through the incorporation of "smart" technologies into clinical practice. The focus of this review is to provide an overview of the current status of smartphones and digital technology in the management of wounds.

Carbon dots with pH-responsive fluorescence: a review on synthesis and cell biological applications.

This review summarizes state of the art synthesis and applications of carbon dots (CDs) with pH-responsive fluorescence. Following an introduction, the first section covers methods for the preparation of pH-responsive CDs, with subsections on general methods for preparing CDs (by hydrothermal, solvothermal, electrochemical, microwave, laser ablation, pyrolysis or chemical oxidation polymerization methods), and on precursors for synthesis. This is followed by a section on the mechanisms of pH-responsivity (by creating new functional groups, change of energy levels, protonation and deprotonation, aggregation, or by introduction shells). Several Tables are presented that give an overview of the wealth of methods and materials. A final section covers applications of carbon dots (CDs) with pH-responsive fluorescence for sensing, drug delivery, and imaging. The conclusion summarizes the current status, addresses challenges, and gives an outlook on potential future trends. Graphical abstract The synthesis and biological applications of carbon dots(CDs) with pH-responsive fluorescence are summarized. Precursors and methods for preparation of pH-responsive CDs, mechanisms of pH-responsivity, and biological applications of CDs with pH-responsive fluorescence for sensing, drug delivery, and imaging are discussed.

Effect of carbonization degree of carbon dots on cytotoxicity and photo-induced toxicity to cells.

BACKGROUND: Pristine carbon dots (CDs) derived from citric acid pyrolysis are used in a variety of biomedical research such as imaging and drug delivery. However, potential cytotoxic effects of pyrolysis temperature on cells is underexplored. To address this need, we studied toxicity of the CDs to breast cancer cells using MTT and LDH assays. In addition, we investigated photo-induced cytotoxicity of the synthesized CDs in a wide concentration range under white light. RESULTS: Our results suggest little cytotoxicity of the CDs after 24 h exposure of cells. Only the high quantum yield CDs caused a significant toxicity to cells at the highest concentrations of 2.0 and 1.5 mg/ml compared to other CDs at similar concentrations. The synthesized CDs entered the cells without any significant cytotoxicity. The CDs also caused a concentration- and irradiation time-dependent photo-induced cytotoxicity. CONCLUSION: The optimization of synthesis conditions from this study may help develop safe and efficient CDs for imaging and drug delivery.

Physicochemical and cytotoxicity analysis of green synthesis carbon dots for cell imaging.

Carbon dots (CDs) have outstanding optical properties, biocompatibility, and photostability, making them attractive for imaging applications. A facile and green one-step hydrothermal synthesis method is proposed, which can be safely used in a wide range of applications such as chemical sensing, bioimaging, and optoelectronics. In this study, we report green synthesis of carbon dots from bitter orange juice (Citrus Aurantium) by hydrothermal treatment for the first time. We studied effects of time, temperature, and pH on fluorescence of CDs, characterized them using various spectroscopic and microscopic methods, and evaluated their toxicity to different cell lines. Identifying an optimum reaction condition of 180 ºC for 7 h heating gave CDs that showed pH-dependent fluorescence, with the largest fluorescence at a pH of 7.0. The CDs were 1-2 nm in size with a spherical morphology and negative surface charge. The CDs showed a high quantum yield of 19.9 %, reasonable photostability, excellent water solubility, and long fluorescence lifetime. A one step hydrothermal rout led to various hydrophilic functional groups on the surface of the CDs. Our results showed that the CDs were non-toxic over a large concentration range and effective for imaging of cells, indicating their potential as imaging probes in medical diagnostics and biosensor applications.

Optical Imaging Approaches to Monitor Static and Dynamic Cell-on-Chip Platforms: A Tutorial Review.

Miniaturized laboratories on chip platforms play an important role in handling life sciences studies. The platforms may contain static or dynamic biological cells. Examples are a fixed medium of an organ-on-a-chip and individual cells moving in a microfluidic channel, respectively. Due to feasibility of control or investigation and ethical implications of live targets, both static and dynamic cell-on-chip platforms promise various applications in biology. To extract necessary information from the experiments, the demand for direct monitoring is rapidly increasing. Among different microscopy methods, optical imaging is a straightforward choice. Considering light interaction with biological agents, imaging signals may be generated as a result of scattering or emission effects from a sample. Thus, optical imaging techniques could be categorized into scattering-based and emission-based techniques. In this review, various optical imaging approaches used in monitoring static and dynamic platforms are introduced along with their optical systems, advantages, challenges, and applications. This review may help biologists to find a suitable imaging technique for different cell-on-chip studies and might also be useful for the people who are going to develop optical imaging systems in life sciences studies.

On-chip analysis of carbon dots effect on yeast replicative lifespan.

Carbon dots (CDs) are promising nanomaterials for biosensing, bioimaging, and drug delivery due to their large surface area, excellent optical properties, and thermal and chemical stability. However, biosafety of CDs is still understudied, and there is not a generally accepted standard to evaluate the toxicity of CDs. We present a gradient network generator microfluidic device for dose-dependent testing of toxicity of CDs to a unicellular eukaryotic model organism, yeast Pichia pastoris. We fully characterized the microfluidic model and compare its performance with a conventional method. The gradient generator increased the contact area between the mixing species and enabled a high-throughput testing of CDs in a wide range of concentrations in cell chambers. Real time monitoring of yeast cell proliferation in the presence of CDs showed dose-dependent growth inhibition and various budding cell shape profiles. Comparing the result of microfluidic platform and conventional method revealed statistically significant differences in the proliferation rate of the cells between the two platforms. To understand the toxicity mechanism, we studied binding of CDs to P. pastoris and found increasing interactions of CDs with the cell surface at CDs larger concentrations. This study demonstrated the utility of the gradient generator microfluidic device as a convenient tool for toxicity assessment of nanomaterials at a cellular level.

Investigation the cytotoxicity and photo-induced toxicity of carbon dot on yeast cell.

Carbon dots (CDs) as a new fluorescent material with excellent water solubility, chemical inertness, and easy surface modification are a good candidate for bioimaging and biosensing due to their low toxicity and good biocompatibility. Although carbon is not an intrinsically toxic substance, carbon nanomaterials such as CDs may cause risks to human health and the potentially hazardous effects of CDs on various living systems must be completely determined. So far, cytotoxicity studies of CDs have focused on human cells and are mainly conducted on limited cell lines. In the present study, toxicity assessment of CDs was evaluated on yeast cells Pichia pastoris as a unicellular eukaryotic model. Results revealed dose-dependent toxicity of CDs on yeast cells and less relative cell growth in 25 mg/ml of CDs as compared to the control group. CDs binding curve confirmed the interaction between CDs and surface of yeast cells. SEM images showed that the CDs caused cell shrinkage and hole formation on the surface of yeast cells and also induced slightly cell deformation. It was demonstrated that CDs could generate the ROS dose-dependently. Finally, results showed the growth inhibition and ROS generation effects of CDs were enhanced at light exposure, as an important environmental factor. These findings could have important implications for applications of CDs.

New Insight into the Concept of Carbonization Degree in Synthesis of Carbon Dots to Achieve Facile Smartphone Based Sensing Platform.

Direct pyrolysis of citric acid (CA) has been proved to be a facile bottom-up technique for making pristine carbon dots (CD) with homogenous size distribution. However, limited reports are available on systematic optimization of carbonization degree. In this investigation, pyrolysis temperatures between 160 °C and 220 °C were studied, based on CA thermal decomposition path, using various heating durations. The effect of the formation of more carbonized carbon particles (MCCPs), as the major byproduct of this method, on photoluminescence properties of CDs was also considered. The NaOH amount that neutralizes the solution and the effect of dilution on the emission intensity, were introduced as simple and accessible factors for monitoring carbonization degree, and an estimate of MCCP/CD ratio, respectively. The results show that the CDs fabricated at 160 °C, 50 minutes attain almost twice higher quantum yield (QY) of 29% than highest QY reported based on pyrolysis of CA. The so-prepared CDs can be employed as excellent candidates for turn-off sensing. As a proof of concept, detection limit of 50 nM for Hg2+ was achieved using a facile and inexpensive smartphone set-up that is able to quantify and compare fluorescent intensity in several samples simultaneously.