RESUMEN
Per- and polyfluoroalkyl substances (PFAS) are manufactured chemicals that have been detected across the globe. Fluorotelomer alcohols (FTOHs) are one PFAS class commonly found in indoor air due to emissions from consumer products (e.g., textiles and food packaging) and are human metabolic, atmospheric oxidative, and industrial precursors of perfluoroalkyl carboxylic acids (PFCAs). We developed a quantitative method for real-time analysis of gas-phase FTOHs, perfluoroalkyl acids (PFCAs and GenX), one perfluorooctane sulfonamide (EtFOSA), one fluorotelomer diol (FTdiOH), and one fluorinated ether (E2) using high-resolution time-of-flight chemical ionization mass spectrometry equipped with iodide reagent ion chemistry (I-HR-ToF-CIMS). Herein, we present a direct liquid injection method for external calibration, providing detection limits of 0.19-3.1 pptv for 3 s averaging and 0.02-0.44 pptv for 120 s averaging, with the exception of E2, which had detection limits of 1700 and 220 pptv for 3- and 120 s averaging, respectively. These calibrations enabled real-time gas-phase quantification of 6 : 2 FTOH in room air while microwaving popcorn, with an average peak air concentration of 31.6 ± 4.5 pptv measured 2 meters from a closed microwave. Additionally, 8 : 2 and 10 : 2 FTOH concentrations in indoor air were measured in the presence and absence of a rain jacket, with observed peak concentrations of 110 and 25 pptv, respectively. Our work demonstrates the ability of I-HR-ToF-CIMS to provide real-time air measurements of PFAS relevant to indoor human exposure settings and allow for PFAS source identification. We expect that real-time quantification of other gas-phase PFAS classes is possible, enabling advances in understanding PFAS sources, chemistry, and partitioning.
RESUMEN
Models and laboratory studies suggest that everyday clothing influences the transdermal uptake of semivolatile organic compounds, including phthalate plasticizers, from indoor environments. However, this effect has not been documented in environmental exposure settings. In this pilot study, we quantified daily excretion of 17 urinary metabolites (µg/day) for phthalates and phthalate alternatives in nine participants during 5 days. On Day 0, baseline daily excretion was determined in participants' urine. Starting on Day 1, participants refrained from eating phthalate-heavy foods and using personal care products. On Days 3 and 4, participants wore precleaned clothing as an exposure intervention. We observed a reduction in the daily excretion of phthalates during the intervention; mono-n-butyl phthalate, monoisobutyl phthalate (MiBP), and monobenzyl phthalate were significantly reduced by 35, 38, and 56%, respectively. Summed metabolites of di(2-ethylhexyl)phthalate (DEHP) were also reduced (27%; not statistically significant). A similar reduction among phthalate alternatives was not observed. The daily excretion of MiBP during the nonintervention period strongly correlated with indoor air concentrations of diisobutyl phthalate (DiBP), suggesting that inhalation and transdermal uptake of DiBP from the air in homes are dominant exposure pathways. The results indicate that precleaned clothing can significantly reduce environmental exposure to phthalates and phthalate alternatives.
Asunto(s)
Contaminantes Ambientales , Ácidos Ftálicos , Humanos , Plastificantes , Contaminantes Ambientales/análisis , Proyectos Piloto , Ácidos Ftálicos/metabolismo , Exposición a Riesgos Ambientales/análisis , VestuarioRESUMEN
Partitioning of per- and polyfluoroalkyl substances (PFAS) to indoor materials, including clothing, may prolong the residence time of PFAS indoors and contribute to exposure. During the Indoor PFAS Assessment (IPA) Campaign, we measured concentrations of nine neutral PFAS in air and cotton cloth in 11 homes in North Carolina, for up to 9 months. Fluorotelomer alcohols (i.e., 6:2 FTOH, 8:2 FTOH, and 10:2 FTOH) are the dominant target species in indoor air, with concentrations ranging from 1.8 to 49 ng m-3, 1.2 to 53 ng m-3, and 0.21 to 5.7 ng m-3, respectively. In cloth, perfluorooctane sulfonamidoethanols (i.e., MeFOSE and EtFOSE) accumulated most significantly over time, reaching concentrations of up to 0.26 ng cm-2 and 0.24 ng cm-2, respectively. From paired measurements of neutral PFAS in air and suspended cloth, we derived cloth-air partition coefficients (Kca) for 6:2, 8:2, and 10:2 FTOH; ethylperfluorooctane sulfonamide (EtFOSA); MeFOSE; and EtFOSE. Mean log(Kca) values range from 4.7 to 6.6 and are positively correlated with the octanol-air partition coefficient. We investigated the effect of the cloth storage method on PFAS accumulation and the influence of home characteristics on air concentrations. Temperature had the overall greatest effect. This study provides valuable insights into PFAS distribution, fate, and exposure indoors.
Asunto(s)
Contaminantes Atmosféricos , Fluorocarburos , Monitoreo del Ambiente , North Carolina , Contaminantes Atmosféricos/análisis , Fluorocarburos/análisisRESUMEN
Assessing exposure to semivolatile organic compounds (SVOCs) that are emitted from consumer products and building materials in indoor environments is critical for reducing the associated health risks. Many modeling approaches have been developed for SVOC exposure assessment indoors, including the DustEx webtool. However, the applicability of these tools depends on the availability of model parameters such as the gas-phase concentration at equilibrium with the source material surface, y0, and the surface-air partition coefficient, Ks, both of which are typically determined in chamber experiments. In this study, we compared two types of chamber design, a macro chamber, which downscaled the dimensions of a room to a smaller size with roughly the same surface-to-volume ratio, and a micro chamber, which minimized the sink-to-source surface area ratio to shorten the time required to reach steady state. The results show that the two chambers with different sink-to-source surface area ratios yield comparable steady-state gas- and surface-phase concentrations for a range of plasticizers, while the micro chamber required significantly shorter times to reach steady state. Using y0 and Ks measured with the micro chamber, we conducted indoor exposure assessments for di-n-butyl phthalate (DnBP), di(2-ethylhexyl) phthalate (DEHP) and di(2-ethylhexyl) terephthalate (DEHT) with the updated DustEx webtool. The predicted concentration profiles correspond well with existing measurements and demonstrate the direct applicability of chamber data in exposure assessments.
Asunto(s)
Contaminación del Aire Interior , Contaminación del Aire Interior/análisis , Dibutil Ftalato , Materiales de Construcción , Compuestos OrgánicosRESUMEN
Estimates of human exposure to semi-volatile organic compounds (SVOCs) such as phthalates, phthalate alternatives, and some per- and polyfluoroalkyl substances (PFAS) are required for the risk-based evaluation of chemicals. Recently, a modular mechanistic modeling framework to rapidly predict SVOC emission and partitioning in indoor environments has been presented, in which several mechanistically consistent source emission categories (SECs) were identified. However, not all SECs have well-developed emission models. In addition, data on model parameters are missing even for frequently studied SVOCs. These knowledge gaps impede the comprehensive prediction of the fate of SVOCs indoors. In this paper, sets of high-priority phthalates, phthalate alternatives, and PFAS were identified based on chemical occurrence indoors and additional selection criteria. These high-priority chemicals served as the basis for exploring model parameter availability for existing indoor SVOC emission and partitioning models. The results reveal that additional experimental and modeling work is needed to fully understand the behavior of SVOCs indoors and to predict exposures with greater confidence and lower uncertainty. Modeling approaches to fill some of the identified gaps are proposed. The prioritized sets of chemicals and proposed new modeling approaches will help guide future research. The inclusion of polar phases in the framework will further expand its applicability and scope. IMPACT STATEMENT: This paper compiles data on high-priority chemicals commonly found indoors and information on the availability of applicable models and model parameters to predict emission, partitioning, and subsequent exposure to these chemicals. Modeling approaches for a selection of the missing SECs (source emission categories) are proposed, to illustrate the path forward. The comprehensive data set helps inform researchers, exposure assessors, and policy makers to better understand the state of the science regarding modeling of indoor exposure to semi-volatile organic compounds (SVOCs) and per- and polyfluoroalkyl substances (PFAS).
Asunto(s)
Contaminación del Aire Interior , Fluorocarburos , Compuestos Orgánicos Volátiles , Contaminación del Aire Interior/análisis , Polvo , Humanos , Plastificantes , Compuestos Orgánicos Volátiles/análisisRESUMEN
Large surface area-to-volume ratios indoors cause heterogeneous interactions to be especially important. Semi-volatile organic compounds can deposit on impermeable indoor surfaces forming thin organic films. We developed a new model to simulate the initial film formation by treating gas-phase diffusion and turbulence through a surface boundary layer and multi-layer reversible adsorption on rough surfaces, as well as subsequent film growth by resolving bulk diffusion and chemical reactions in a film. The model was applied with consistent parameters to reproduce twenty-one sets of film formation measurements due to multi-layer adsorption of multiple phthalates onto different indoor-relevant surfaces, showing that the films should initially be patchy with the formation of pyramid-like structures on the surface. Sensitivity tests showed that highly turbulent conditions can lead to the film growing by more than a factor of two compared to low turbulence conditions. If surface films adopt an ultra-viscous state with bulk diffusion coefficients of less than 10-18 cm2 s-1 , a significant decrease in film growth is expected. The presence of chemical reactions in the film has the potential to increase the rate of film growth by nearly a factor of two.
Asunto(s)
Contaminación del Aire Interior , Compuestos Orgánicos Volátiles , Adsorción , Difusión , Cinética , Compuestos Orgánicos Volátiles/análisisRESUMEN
A critical review of the current state of knowledge of chemical emissions from indoor sources, partitioning among indoor compartments, and the ensuing indoor exposure leads to a proposal for a modular mechanistic framework for predicting human exposure to semivolatile organic compounds (SVOCs). Mechanistically consistent source emission categories include solid, soft, frequent contact, applied, sprayed, and high temperature sources. Environmental compartments are the gas phase, airborne particles, settled dust, indoor surfaces, and clothing. Identified research needs are the development of dynamic emission models for several of the source emission categories and of estimation strategies for critical model parameters. The modular structure of the framework facilitates subsequent inclusion of new knowledge, other chemical classes of indoor pollutants, and additional mechanistic processes relevant to human exposure indoors. The framework may serve as the foundation for developing an open-source community model to better support collaborative research and improve access for application by stakeholders. Combining exposure estimates derived using this framework with toxicity data for different end points and toxicokinetic mechanisms will accelerate chemical risk prioritization, advance effective chemical management decisions, and protect public health.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire Interior , Compuestos Orgánicos Volátiles , Contaminantes Atmosféricos/análisis , Contaminación del Aire Interior/análisis , Polvo/análisis , Humanos , Compuestos Orgánicos/análisis , Compuestos Orgánicos Volátiles/análisisRESUMEN
Per- and polyfluoroalkyl substances (PFAS) include a wide range of halogenated chemicals, which have been used as water- and stain-resistant coatings for consumer products and industrial purposes. PFAS are persistent in the environment and several are bioaccumulative, and thus relevant for human and environmental health. Given their pervasiveness, we need to understand how we are exposed to PFAS, especially in indoor environments where many people spend most of their time. Research on indoor exposure to semivolatile organic compounds (SVOCs) has progressed rapidly in recent years. Because many PFAS can be considered SVOCs, much of what has been learned about SVOCs may be used to guide research on PFAS exposure in indoor environments. Here, we briefly review what has been done to assess indoor exposure to PFAS. Then, we propose a systematic indoor exposure framework for PFAS based on methods to estimate exposure to SVOCs. We illustrate how critical parameters such as partition coefficients for different media (particles, dust, surfaces, and clothing) for different types of PFAS could be measured, how these measurements can be used in exposure models for PFAS, and how fundamental, predictive relationships might be used to estimate necessary parameters for emerging compounds.
Asunto(s)
Contaminación del Aire Interior , Materiales de Construcción , Polvo , Humanos , Compuestos OrgánicosRESUMEN
Risk-based chemical safety assessments are increasingly being conducted to support chemical management decisions and informed substitution to protect public health. Rapid evaluation and prioritization of large numbers of chemicals used in materials, products, and other indoor articles has become a major focus of chemical risk management strategies. Internationally, although a shared understanding of the value of rapid risk-based evaluations appears to be emerging, implementation strategies and associated management decisions vary from one agency and jurisdiction to another. This paper highlights the international chemical risk management landscape focusing on phthalates as an example, and reviews how phthalate exposure assessments have been performed, resulting at times in different decisions based on the application of scientific information within different policy contexts. In general, the need for efficient and effective risk-based assessment approaches is driving increased needs for high-quality exposure data and validated, mechanistic exposure models. Further development of mechanistic models and related parameters will reduce uncertainties in exposure estimates and support scientific risk-based evaluations of chemical/product combinations for a variety of decisions.
Asunto(s)
Exposición a Riesgos Ambientales , Ácidos Ftálicos , Humanos , Medición de Riesgo , Gestión de RiesgosRESUMEN
Certain processes in indoor air, such as deposition, partitioning, and heterogeneous reactions, involve interactions with surfaces. We have characterized the surface area, volume, shape, and material of objects in 10 bedrooms, nine kitchens, and three offices. The resolution of the measurements was â¼1 cm. The ratio of surface area with contents to that without contents did not vary by type of room and averaged 1.5 ± 0.3 (mean ± standard deviation) across all rooms. The ratio of the volume minus contents to nominal volume averaged 0.9 ± 0.1 and was lower for kitchens compared to bedrooms and offices. Ignoring contents, the surface-area-to-volume ratio was 1.8 ± 0.3 m-1; accounting for contents, the ratio was 3.2 ± 1.2 m-1, or 78% higher. These two ratios did not vary by type of room and were similar to those measured for 33 rooms in another study. Due to substantial differences in the design and contents of kitchens, their ratios had the highest variability among the three room types. The most common shape of surfaces was flat rectangular, while each room also had many irregularly-shaped objects. Paint-covered surfaces and stained wood were the two most common materials in each room, accounting for an average of 42% and 22% of total surface area, respectively, although the distribution of materials varied by room type. These findings have important implications for understanding the chemistry of indoor environments, as the available surface area for deposition, partitioning, and reactions is higher and more complex than assumed in simple models.
Asunto(s)
Contaminación del Aire Interior/análisis , Vivienda/normas , Materiales Manufacturados/análisis , Humanos , Análisis Espacial , Propiedades de SuperficieRESUMEN
Emission, transport, and fate of semi-volatile organic compounds (SVOCs), which include plasticizers, flame retardants, pesticides, biocides, and oxidation products of volatile organic compounds, are influenced in part by their tendency to sorb to indoor surfaces. A thin organic film enhances this effect, because it acts as both an SVOC sink and a source, thus potentially prolonging human exposure. Unfortunately, our ability to describe the initial formation and subsequent growth of organic films on indoor surfaces is limited. To overcome this gap, we propose a mass transfer model accounting for adsorption, condensation, and absorption of multiple gas-phase SVOCs on impervious, vertical indoor surfaces. Further model development and experimental research are needed including more realistic scenarios accounting for surface heterogeneity, non-ideal organic mixtures, and particle deposition.
Asunto(s)
Contaminación del Aire Interior , Modelos Químicos , Compuestos Orgánicos Volátiles/química , Compuestos Orgánicos Volátiles/metabolismo , Absorción Fisicoquímica , Adsorción , Contaminantes Atmosféricos , Contaminación del Aire Interior/análisis , Humanos , Compuestos Orgánicos Volátiles/análisisRESUMEN
Phthalates and phthalate alternatives are semivolatile organic compounds (SVOCs) present in many PVC products as plasticizers to enhance product performance. Knowledge of the mass-transfer parameters, including the equilibrium concentration in the air in contact with the product surface ( y0), will greatly improve the ability to estimate the emission rate of SVOCs from these products and to assess human exposure. The objective of this study was to measure y0 for different PVC products and to evaluate its relationship with the material-phase concentrations ( C0). Also, C0 and y0 data from other sources were included, resulting in a substantially larger data set ( Ntotal = 34, T = 25 °C) than found in previous studies. The results show that the material/gas equilibrium relationship does not follow Raoult's law and that therefore the assumption of an ideal solution is invalid. Instead, Henry's law applies, and the Henry's law constant for all target SVOCs consists of the respective pure liquid vapor pressure and an activity coefficient γ, which accounts for the nonideal nature of the solution. For individual SVOCs, a simple partitioning relationship exists, but Henry's law is more generally applicable and will be of greater value in rapid exposure assessment procedures.
Asunto(s)
Contaminación del Aire Interior , Gases , Humanos , Compuestos Orgánicos , Cloruro de Polivinilo , Presión de VaporRESUMEN
The particle/gas partition coefficient Kp is an important parameter affecting the fate and transport of indoor semivolatile organic compounds (SVOCs) and resulting human exposure. Unfortunately, experimental measurements of Kp exist almost exclusively for atmospheric polycyclic aromatic hydrocarbons, with very few studies focusing on SVOCs that occur in indoor environments. A specially designed tube chamber operating in the laminar flow regime was developed to measure Kp of the plasticizer di-2-ethylhexyl phthalate (DEHP) for one inorganic (ammonium sulfate) and two organic (oleic acid and squalane) particles. The values of Kp for the organic particles (0.23 ± 0.13 m3/µg for oleic acid and 0.11 ± 0.10 m3/µg for squalane) are an order of magnitude higher than those for the inorganic particles (0.011 ± 0.004 m3/µg), suggesting that the process by which the particles accumulate SVOCs is different. A mechanistic model based on the experimental design reveals that the presence of the particles increases the gas-phase concentration gradient in the boundary layer, resulting in enhanced mass transfer from the emission source into the air. This novel approach provides new insight into experimental designs for rapid Kp measurement and a sound basis for investigating particle-mediated mass transfer of SVOCs.
Asunto(s)
Contaminación del Aire Interior , Dietilhexil Ftalato , Ácidos Ftálicos , Humanos , PlastificantesRESUMEN
Sorption of semivolatile organic compounds (SVOCs) onto interior surfaces, often referred to as the "sink effect", and their subsequent re-emission significantly affect the fate and transport of indoor SVOCs and the resulting human exposure. Unfortunately, experimental challenges and the large number of SVOC/surface combinations have impeded progress in understanding sorption of SVOCs on indoor surfaces. An experimental approach based on a diffusion model was thus developed to determine the surface/air partition coefficient K of di-2-ethylhexyl phthalate (DEHP) on typical impervious surfaces including aluminum, steel, glass, and acrylic. The results indicate that surface roughness plays an important role in the adsorption process. Although larger data sets are needed, the ability to predict K could be greatly improved by establishing the nature of the relationship between surface roughness and K for clean indoor surfaces. Furthermore, different surfaces exhibit nearly identical K values after being exposed to kitchen grime with values that are close to those reported for the octanol/air partition coefficient. This strongly supports the idea that interactions between gas-phase DEHP and soiled surfaces have been reduced to interactions with an organic film. Collectively, the results provide an improved understanding of equilibrium partitioning of SVOCs on impervious surfaces.
Asunto(s)
Contaminación del Aire Interior , Dietilhexil Ftalato , Adsorción , Humanos , Modelos Teóricos , Compuestos OrgánicosRESUMEN
Phthalates and alternative plasticizers are semivolatile organic compounds (SVOCs), an important class of indoor pollutants that may have significant adverse effects on human health. Unfortunately, models that predict emissions of and the resulting exposure to SVOCs have substantial uncertainties. One reason is that the characteristics governing emissions, transport, and exposure are usually strongly dependent on vapor pressure. Furthermore, available data for phthalates exhibit significant variability, and vapor pressures for the various alternatives are usually unavailable. For these reasons, a new approach based on modeling of the evaporation process was developed to determine vapor pressures of phthalates and alternate plasticizers. A laminar flow forced convection model was used in the design of a partial saturator (PS) tube. The mass transfer mechanisms in the PS tube are accurately modeled and enable the determination of vapor pressure even when the carrier gas is not completely saturated, avoiding the complicated procedure to establish vapor saturation. The measured vapor pressures ranged from about 10(-2) to 10(-7) Pa. Compared to the traditional gas saturation method, the model-based approach is advantageous in terms of both predictability and simplicity. The knowledge provides new insight into experimental design and a sound basis for further method development.