Novel composite from chitosan and a metal-organic framework for removal of tartrazine dye from aqueous solutions; adsorption isotherm, kinetic, and optimization using Box-Benkhen design.

Cosmetics, textiles, foodstuffs, and medicines frequently contain the yellow dye tartrazine. It has carcinogenic properties and can trigger allergies. In this study, a unique NH2-MIL-101(Cr)/chitosan composite (MIL/chitosan composite) was created using a hydrothermal process. The effectiveness of this composite in removing Tartrazine (TZ) from aqueous solutions was investigated. It was characterized via FT-IR, XPS, XRD, and BET analysis. The surface area of the MIL/chitosan nanoadsorbent sample was 1256.64 m2/g, where after five times recycling, it was reduced to 1068.14 m2/g. The study analyzed the impact of dye concentration, pH, temperature, and MIL/chitosan composite dosage. Experimental measurements were taken for the equilibrium isotherms of dye adsorption. The kinetic models and adsorption isotherm were used to analyze the results. The adsorption process was found to match Langmuir and pseudo-second-order kinetic models. Chemisorption was the mechanism of the adsorption process. Based on thermodynamic parameters, it was determined that the adsorption process was endothermic. The MIL/chitosan composite was recycled up to five cycles. Using the MIL/chitosan composite towards the adsorption of the tartrazine from the real sample has been checked. The interaction process between the MIL/chitosan nanoadsorbent and Tartrazine adsorbate has been investigated. The TZ electrical characteristics, reactivity, and shape were ascertained through the application of density functional theory (DFT). The placement of electrophilic and nucleophilic attack sites is in good agreement with the molecular orbitals (HOMO and LUMO) and MEP results, according to DFT. The optimization of adsorption results was accomplished using Box-Behnken design (BBD).

Enhancing trimethoprim pollutant removal from wastewater using magnetic metal-organic framework encapsulated with poly (itaconic acid)-grafted crosslinked chitosan composite sponge: Optimization through Box-Behnken design and thermodynamics of adsorption parameters.

Trimethoprim (TMP), an antibiotic contaminant, can be effectively removed from water by using the innovative magnetic metal-organic framework (MOF) composite sponge Fe3O4@Rh-MOF@PIC, which is shown in this study. The composite is made up of magnetite (Fe3O4) nanoparticles and a rhodium MOF embedded in a poly(itaconic acid) grafted chitosan matrix. The structure and characteristics of the synthesized material were confirmed by thorough characterization employing SEM, FTIR, XPS, XRD, and BET techniques. Notably, the composite shows a high magnetic saturation of 64 emu g-1, which makes magnetic separation easier, according to vibrating sample magnetometry. Moreover, BET analysis revealed that the Fe3O4@Rh-MOF@PIC sponge had an incredibly high surface area of 1236.48 m2/g. Its outstanding efficacy was confirmed by batch adsorption tests, which produced a maximum adsorption capacity of 391.9 mg/g for the elimination of TMP. Due to its high porosity, magnetic characteristics, and superior trimethoprim uptake, this magnetic MOF composite sponge is a promising adsorbent for effective removal of antibiotics from contaminated water sources. An adsorption energy of 24.5 kJ/mol was found by batch investigations on the Fe3O4@Rh-MOF@PIC composite sponge for trimethoprim (TMP) adsorption. The fact that this value was up 8 kJ/mol suggests that the main mechanism controlling TMP absorption onto the sponge adsorbent is chemisorption. Chemisorption requires creating strong chemical interactions between adsorbate and adsorbent surface groups, unlike weaker physisorption. The magnetic composite sponge exhibited strong removal capabilities and high adsorption capacities for the antibiotic pollutant. The Fe3O4@Rh-MOF@PIC composite sponge also showed magnetism, which allowed for easy magnetic separation after adsorption. Over the course of 6 cycles, it showed outstanding reusability, and XRD confirmed that its composition was stable. The high surface area MOF's pore filling, hydrogen bonding, π-π stacking, and electrostatic interactions were the main trimethoprim adsorption mechanisms. This magnetic composite is feasible and effective for removing antibiotics from water because of its separability, reusability, and synergistic adsorption mechanisms via electrostatics, H-bonding, and π-interactions. The adsorption results were optimized using Box Behnken-design (BBD).

Guava seed activated carbon loaded calcium alginate aerogel for the adsorption of diclofenac sodium: Characterization, isotherm, kinetics, and optimization via Box-Behnken design.

This study aimed to develop a novel adsorbent designed for the removal of diclofenac sodium (DS) from water. The synthesized adsorbent, a composite sponge known as guava seeds activated carbon loaded calcium alginate (GSAC@CA aerogel), was created through the combination of powdered activated carbon derived from guava seeds and loaded onto a calcium alginate hydrogel. Characterization through SEM, XRD, FT-IR, BET, and XPS revealed a confirmed surface area of 738.82 m2/g. The investigation delved into assessing the influence of pH, initial DS concentration, and adsorbent dose on the adsorption of DS. Isotherm studies on adsorption suggested that a Langmuir model provided a good fit, indicating a monolayer adsorption process. Kinetic studies revealed a well-fitted pseudo-second-order model, shedding light on the dynamics of the reaction. The chemisorption nature was elucidated by the Dubinin-Radushkevich model, demonstrating an adsorption energy of 22.6 kJ/mol. These results affirm the potential of the GSAC@CA aerogel composite sponge as an efficient adsorbent for removing diclofenac sodium from water. Examination of the impact of temperature on the adsorption process revealed an endothermic behavior, indicating an increase in temperature. The positive change in entropy suggested the spontaneous nature of the reaction. Remarkably, the GSAC@CA aerogel composite sponge exhibited strong adsorption capabilities, achieving a maximum adsorption capacity of 489.97 mg/g. Across five consecutive cycles, the composite consistently demonstrated high-level adsorption, maintaining a removal efficiency of 87.77 %. The adsorption mechanism of diclofenac sodium (DS) on the GSAC@CA aerogel composite sponge was determined to encompass various processes, such as hydrogen bonding, π-π interactions, ion exchange, and electrostatic pore filling. Additionally, the adsorbent demonstrated successful regeneration over three cycles when applied to a real-world sample. The incorporation of the Box-Behnken design (BBD) introduced a strategic aspect to enhance adsorption outcomes, offering valuable insights for optimizing the adsorption process in practical applications.

Chitosan-nano CuO composite for removal of mercury (II): Box-Behnken design optimization and adsorption mechanism.

The study aimed to develop an adsorbent for extracting mercury (II) from water by combining chitosan beads with green copper oxide nanoparticles. This resulted in the synthesis of the CuO NPs@CSC composite sponge, achieved by loading CuO NPs onto citrate-crosslinked chitosan (CSC). Characterization involved X-ray diffraction, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and scanning electron microscopy. The BET method confirmed a higher surface area of the adsorbent at 285.55 m2/g, suggesting its potential for effective mercury (II) removal from water. This research aligns with broader efforts in environmental science and nanotechnology to create advanced materials for water purification. The characterization techniques ensure the suitability of the synthesized material for its intended application, and the significant surface area enhances its capacity for contaminant adsorption. The study investigated the impact of adsorbent dosage, pH, and initial Hg (II) concentration on mercury (II) adsorption. Results showed a fit with the pseudo-second-order kinetic model and Langmuir adsorption isotherm model. Using the Dubinin-Radushkevich model (adsorption energy: 22.74 kJ mol-1), chemisorption was identified. Notably, the adsorption process was found to be endothermic, indicating that higher temperatures led to increased removal capacity and related parameters. This temperature influence was explored systematically. Additionally, the study concluded that the adsorption reaction was spontaneous, evidenced by a positive entropy change. This analysis contributes valuable insights into the thermodynamics and kinetics of mercury (II) adsorption in the studied system. The CuO NPs@CSC composite sponge achieved an impressive adsorption capacity of 672 mg/g. Even after five consecutive cycles, it maintained strong adsorption capabilities with 84.5 % removal efficiency. Remarkably, over six reuse cycles, there were no observable changes in chemical composition, and XRD peaks remained consistent before and after each cycle. The study delved into the interaction mechanism between the CuO NPs@CSC composite sponge and heavy metals. Utilizing the Box-Behnken design (BBD), the adsorption process was optimized for enhanced efficiency.

Efficient Adsorption and Removal of the Herbicide 2,4-Dichlorophenylacetic Acid from Aqueous Solutions Using MIL-88(Fe)-NH2.

Metal-organic frameworks (MOFs), a material known for its multifunctionality, chemical stability, and high surface area, are now commonly utilized as an adsorbent for water treatment. The MOF (MIL-88(Fe)-NH2) was synthesized and used to remove the commonly used toxic herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) from water. The MIL-88(Fe)-NH2 MOF was fully characterized using multiple techniques. A systematic investigation was conducted to evaluate the key parameters that impact the adsorption process, which include coexisting anions, adsorbent dosage, and solution pH. The adsorption isotherm was fitted using the Langmuir model, while the kinetics were fitted using pseudo-second-order. The adsorption process was both chemisorption and endothermic. The capacity for adsorption increased with rising temperatures. The MIL-88(Fe)-NH2 adsorbent has a maximum adsorption capacity of 345.25 mg g-1 for removing 2,4-D, significantly higher than previous adsorbents used for this purpose. The adsorption mechanism could be ascribed to hydrogen bonding, pore filling, π-π conjugations between the 2,4-D molecules and the MIL-88(Fe)-NH2 adsorbent, and electrostatic interactions. Furthermore, the adsorption capacity of MIL-88(Fe)-NH2 adsorbent showed only a slight decrease after five successive recycles, and it could be easily regenerated through solvent washing. When used in environmental water samples, especially those containing electronic wastes, the MIL-88(Fe)-NH2 adsorbent demonstrated satisfactory adsorption capacity and reusability. The MIL-88(Fe)-NH2 adsorbent is more practical and reusable and has better adsorption capacity and shorter equilibrium time compared to previously reported adsorbents.

Superior adsorption and removal of doxorubicin from aqueous solution using activated carbon via thermally treated green adsorbent: isothermal, kinetic, and thermodynamic studies.

Activated carbon from apricot seeds (ASAC) was successfully made using a low-cost, straightforward synthesis process. With the use of various instruments, including XRD, XPS, FT-IR, SEM, and TEM, the adsorbent was demonstrated. The surface area of the ASAC that was given was also shown to be 436.8 m2/g. It was discovered that the synthesized ASAC has a fantastic capacity to absorb the anti-cancer medication doxorubicin hydrochloride (DOX). Based on changes in temperature, pH, and DOX concentration, The DOX adsorption behaviour's mechanism was evaluated. The adsorption capacity of ASAC for DOX was greater at pH 6.0, according to experimental data as the adsorption capacity was discovered to be 951.13 mg/g. Adsorption equilibrium analysis revealed that, when compared to the other models, the Langmuir adsorption provided the best fit to the data that were collected. Additionally, The ASAC has validated the DOX activation energy of adsorption as a chemisorption technique. The kinetics of adsorption were shown to be fitted to pseudo-second-order kinetic model. The reaction was endothermic and spontaneous, according to thermodynamic data. Innvestigation the removal efficiency of ASAC to remove DOX from real watrer sample (tap water, effluent wastewater, and impact wastewater). It was suggested by the results that ASAC was a viable option for treating wastewater and adsorbing DOX. The synthesized ASAC has noteworthy cyclability and reusability characteristics due to its high efficiency (up to five cycles) and low cost (around 86 percent).

Efficiency of Fe3O4@ZIF-8 for the removal of Doxorubicin from aqueous solutions: equilibrium, kinetics and thermodynamic studies.

Due to inadequate pharmaceutical wastewater treatment, anticancer contaminants from the pharmaceutical industry frequently end up in the aquatic environment where they endanger aquatic life and humans. As a result, the appropriate treatment of wastewater that contains anticancer agents is crucial for pollution prevention. The purpose of this work is to assess the effectiveness of a Fe3O4@ZIF-8 nanocomposite as an adsorbent to remove of the chemotherapeutic drugs doxorubicin (DOX) from aqueous solution. SEM, XRD, BET, FT-IR, Zeta potential, and point of zero charge analysis were used to study the surface and structural characteristics of the Fe3O4@ZIF-8 nanocomposite. Via the proposed treatment, 804.84 mg/g elimination was successful under the following circumstances: pH = 6; Fe3O4@ZIF-8 dose = 0.02 g/25 mL; DOX concentration = 1.22x10-3 mol; adsorption time = 100 min; and shaking speed = 200 rpm. A investigation of isotherms shown that the Langmuir equation and experimental data suited each other quite well. The adsorption of DOX on Fe3O4@ZIF-8 was endothermic and spontaneous, in accordance with thermodynamic properties. Furthermore, the elimination of DOX was enhanced by the rise in solution temperature. The kinetic analysis revealed that the pseudo-second order was fitted by the model. The suggested adsorption method could recycle Fe3O4@ZIF-8 nanocomposite six times, with a modest reduction in its ability for adsorption. For all XRD reflection peaks, physical characteristics including strain rates were computed and the dislocation of was 4.7 × 10-6. Investigate the activity of the DOX towards COVID-19, breast and prostate cancer using molecular docking.