RESUMEN
In recent years, there has been a significant increase related to pesticide residues in foods, which may increase the risks to the consumer of these foods with the different quality and concentrations of pesticide residues. Pesticides are used for controlling pests that reduce yields. On the other hand, it has become a major public health concern due to its toxic properties. Thus, the objective of the current study employed the application of Quick Easy Cheap Effective Rugged Safe (QuEChERS) method, in combination with gas and liquid chromatography-tandem mass spectrometric detection (GCMSMS, LCMSMS) in order to determine 137 pesticide residues (63 insecticides, 41 acaricides, 40 herbicide, 55 fungicide, nematicide, growth regulator, Chitin synthesis inhibitors, and Juvenile hormone mimics), in 801 vegetables such as 139 tomatoes, 185 peppers, 217 squash, 94 eggplants, and 166 cucumbers from different locations in Hail and Riyadh cities. The results showed that the majority of pesticide residues were detected for each of the following pesticides: acetaimpride, metalaxyl, imidaclopride, bifenthrin, pyridaben, difenoconazole, and azoxystrobien, which were repeated in the samples studied 39, 21, 11, 10, 8, 7, and 5, respectively. In addition, results observed that the tomato was the most contaminated with pesticide residues; it was contaminated with 19 compounds and was followed by pepper, cucumber, and squash, and the last commodity in the contaminated ranking was eggplant. The highest calculated estimated daily intakes (EDIs) were recorded for tomatoes which were estimated between 0.013 to 0.516 mg/kg of body weight per day (bw/day) while the lowest EDIs value was between 0.000002 to 0.0005 mg/kg of bw/day for cucumber. Results indicated that the EDIs values were lower than the acceptable daily intake (ADI) values. Results observed that the most of pesticide residues exposure in food consumption in Saudi Arabia were lower than ADIs. In addition, the highest value for health risk index (HRI) was recorded with Ethion residue in tomato, but in sweet pepper, the highest value for HRI was 127.5 in the form of fipronil residue. On the other hand, results found that the highest values of HRI were 1.54, 1.61, and 0.047 for difenoconazole, bifenthrin, and pyridaben residues in squash, eggplant, and cucumber.
Asunto(s)
Cucumis sativus , Residuos de Plaguicidas , Plaguicidas , Residuos de Plaguicidas/análisis , Verduras/química , Espectrometría de Masas en Tándem/métodos , Contaminación de Alimentos/análisis , Plaguicidas/análisis , Medición de Riesgo , Cucumis sativus/químicaRESUMEN
Biochar's agricultural and environmental benefits have been widely demonstrated; however, it may cause environmental contamination if it contains large amounts of pollutants such as polycyclic aromatic hydrocarbons (PAHs) and heavy metals (HMs). Therefore, this study aimed to assess the contents of PAHs and HM in a range of biochars generated from different sources and pyrolysis temperatures. A range of feedstock was converted to biochar, including sewage sludge (SS), olive mill pomace (OP), feather meal (FM), soft offal meal (CSM), chicken manure (CM), and date palm residues (DPR). Each feedstock was then pyrolyzed at three temperatures of 300, 500, or 700 °C, thereby producing a total of 18 types of biochar. These biochar products were analyzed for 16 PAHs and eight metals (Cr, Mn, Fe, Ni, Cu, Zn, Cd, and Pb). Benzo[b]fluoranthene, benzo[k]fluoranthene, and benzo(a)pyrene were significantly greater in the biochar produced at 700 °C than in that produced at 300 °C, especially for CM. The concentrations of dibenz(a,h)anthracene were significantly lower at 700 °C but greater at 500 °C and 300 °C in DPR. Increasing the pyrolysis temperature from 300 to 700 °C significantly increased the concentrations of metals, including Cr in SS and OP; Mn in CM; and Fe, Ni, Cu, and Zn in SS. However, the concentration of Cd was significantly lower in the SS when biochar was produced at 700 °C than at 500 or 300 °C. The type of feedstock used and the pyrolysis temperature are key factors influencing the contents of PAHs and HMs in biochar, both of which need to be considered during the production and use of biochar. Further investigations are recommended to establish the relationships between pyrolysis temperature and types of feedstock and the formation of PAH or the concentrations of metals. Monitoring the concentrations of PAHs and HMs before applying biochar to soil is also recommended.
RESUMEN
Organic pesticides are major sources of soil pollution in agricultural lands. Most of these pesticides are persistent and tend to bio accumulate in humans upon consumption of contaminated plants. In this study, we investigate different natural soil samples that were collected from agricultural lands. The samples revealed the presence of 18 pesticides that belong to four different groups including organochlorines (OCP), organophosphorus (OPP), carbamates (Carb), and pyrethroids (Pyrth). The photocatalytic degradation of the five most abundant pesticides was studied in the presence and absence of 1% TiO2 or ZnO photocatalysts under UV irradiation at a wavelength of 306 nm. The five abundant pesticides were Atrazine (OCP), Chlorpyrifos methyl (OPP), Dimethoate (OPP), Heptachlor (OCP), and Methomyl (Carb). The results showed that photolysis of all pesticides was complete under UV radiation for irradiation times between 64-100 h. However, both photocatalysts enhanced photocatalytic degradation of the pesticides in comparison with photolysis. The pesticides were photocatalytically degraded completely within 20-24 h of irradiation. The TiO2 photocatalyst showed higher activity compared to ZnO. The organochlorine heptachlor, which is very toxic and persistent, was completely degraded within 30 h using TiO2 photocatalyst for the first time in soil. The mechanism of photocatalytic degradation of the pesticides was explained and the effects of different factors on the degradation process in the soil were discussed.
RESUMEN
Depending on their particle size and concentration, heavy metals in urban dust pose a health hazard to humans. This study investigated the total concentration, health risk, integrated pollution load index (IPI), and enrichment factor (EF) of various heavy metals in urban dust at different locations in Riyadh City. Surface dust samples were collected from 50 different residential yards in the north, south, west, east, and central corners of the city and analyzed for cadmium (Cd), chromium (Cr), copper (Cu), manganese (Mn), nickel (Ni), lead (Pb), and zinc (Zn). With respect to concentrations heavy metals were in the following order Zn > Cu > Mn > Cr > Ni > Pb > Cd. The EF trends exposed repeated anthropogenic activities were responsible for Mn, Cr, and Ni, while Pb, Zn, and Cu appeared to come from Earth's crust. Since the heavy metal concentrations were lower than the threshold values, children and adults are exposed to lower health risk in investigated area. Also, there are no pollution of heavy metals in the dust with respect to IPI which is less than the critical limit (<1) with the exception of a sampling location in north side of the city with higher IPI showed unhealthy respiration conditions in particular areas. It was concluded that rapid industrialization and urbanization and their concentrations in dust may cause health problems in near future in north side as well as other sides of Riyadh City.
Asunto(s)
Polvo/análisis , Monitoreo del Ambiente , Contaminación Ambiental , Metales Pesados/análisis , Ciudades , Arabia SauditaRESUMEN
This paper presents a cost-effective and validated multi residue modified and miniaturized method for the determination of 220 chemically different groups of pesticides and their isomers. This determination method is performed with single Quaid Gas Chromatography Mass Spectrometry -Total Ion Chromatogram GCMS-TIC. Two methods was experimented and modified with different GCMS parameters to analyses most common used pesticide and their residues in the standers solution and can be applied for real environmental samples. The results showed by single Quaid GCMS-TIC it can analyze 220 pesticides including their isomers within 49.6 min and low detection limit by using modified method 2 as described in this research. Limit of detection (LOD) was ranged from 0.78 to 14.74 ng/ml (ppb) with good separation and resolution. Limit of quantification (LOQ) was ranged between 2.34 and 44.22 ng/ml (ppb). Method 2 was more accurate, shorter, and clear separation rather than method 1. This method can be successfully applied in real environmental samples proven to be a good option for routine analysis of pesticide within the maximum residue limits (MRL) referenced to European commission especially with the most common GCMS-TIC which exists in most of labs and low income countries.
RESUMEN
In Saudi Arabia, more than 335,000 tons of cow manure is produced every year from dairy farming. However, the produced cow manure is usually added to the agricultural soils as raw or composted manure; significant nitrogen losses occur during the storage, handling, and application of the raw manure. The recovery of ammonia from cow manure through thermochemical treatments is a promising technique to obtain concentrated nitrogen fertilizer and reducing nitrogen losses from raw manure. However, the byproduct effluents from the recovery process are characterized by different chemical properties from the original raw manure; thus, its impact as soil amendments on the soil carbon and nitrogen dynamics is unknown. Therefore, a 90-day incubation experiment was conducted to study the impact of these effluents on CO2 efflux, organic C, microbial biomass C, available NH4+, and NO3- when added to agricultural soil. In addition to the two types of effluents (produced at pH 9 and pH 12), raw cow manure (CM), composted cow manure (CMC), cow manure biochar (CMB), and control were used for comparison. The application of CM resulted in a considerable increase in soil available nitrogen and CO2 efflux, compared to other treatments. Cow manure biochar showed the lowest CO2 efflux. Cumulative CO2 effluxes of cow manure effluents were lower than CM; this is possibly due to the relatively high C:N ratio of manure effluent. The content of P, Fe, Cu, Zn, and Mn decreased as incubation time increased. Soil microbial biomass C for soil treated with cow manure effluents (pH 12 and 7) was significantly higher than the rest of the soil amendments and control.
RESUMEN
The aim of this study was to determine the types and levels of organochlorine pesticides (OCPs) present in the human milk collected from cities in eastern and central Saudi Arabia. This study is part of assessment of various persistent organic pollutants (POPs) in human milk in four cities of eastern and central Saudi Arabia, namely, Riyadh, Al-Kharj, Al-Jobail and Al-Dammam. Milk samples were collected from 50 donors according to the WHO/UNEP protocol for monitoring human milk for POPs. The OCPs in each of the 50 milk samples were analyzed using as triple quadrupole gas chromatography mass spectrometry-mass spectrometry detection (GC-MS/MS). Quality assurance included the analysis of blank, spiked and reference samples. Sixteen different OCPs were identified namely: aldrin, dieldrin, endrin, hexachlorobenzene, alpha, beta, gamma and delta hexachlorocycohexame, pp'-,op'-DDT, pp'-DDE, pp'-DDD, alpha and gamma chlordane, heptachlor, mirex and methoxychlor. The results of the analysis OCPs in human milk samples indicated that the tested positive samples for one or more pesticide at the limits of determination used in this study. As required by the Stockholm Convention on POPs, the levels of certain POPs in human milk will serve as an indicator of the effectiveness of the treaty in eliminating or reducing emissions of selected POPs. This study contributes to that effort by providing seline data on current levels of OPCs in human milk in Saudi Arabia.
RESUMEN
This study was conducted to identify and quantify polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in soil samples collected from selected industrial areas in the central and eastern regions of Saudi Arabia. All the investigated compounds of PCDDs/PCDFs were identified in the studied locations. The average concentrations of PCDDs (sum of seven congeners measured) ranged from 11.5 to 59.6 pg g(-1), with a maximum concentration of 125.7 pg g(-1) at an oil refinery station followed by 100.9 pg g(-1) at a cement factory. The average concentrations of PCDFs (sum of 10 congeners measured) accounted for 11.68-19.35 pg g(-1), with a maximum concentration of 38.67 pg g(-1) at the cement factory. It was generally observed that the soil samples collected from industrial areas have substantially high toxicity equivalence (TEQ) values of PCDDs/PCDFs compared to soils of remote areas. Principal component analysis revealed that the cement factories and oil refineries were the primary sources of PCDDs and PCDFs.
Asunto(s)
Dibenzofuranos Policlorados/análisis , Dibenzodioxinas Policloradas/análisis , Contaminantes del Suelo/análisis , Suelo/química , Dibenzofuranos Policlorados/química , Monitoreo del Ambiente , Residuos Industriales , Industrias , Dibenzodioxinas Policloradas/química , Análisis de Componente Principal , Arabia Saudita , Contaminantes del Suelo/químicaRESUMEN
Polycyclic aromatic hydrocarbons (PAHs) are potent environmental pollutants, and some of them have been identified as carcinogenic and mutagenic. To advance the knowledge of the environmental fate of PAHs, we systematically investigated the influence of different UV wavelengths irradiation on photolysis of PAHs on sandy soil under tow wavelengths (254 and 306 nm) UV irradiation for six PAHs. In addition, kinetic model and influence of several parameters on PAHs photolysis have been studied. The results obtained indicated that UV radiation with a wavelength of 306 nm was more efficient in the photolysis of the polycyclic aromatic hydrocarbons. Our results showed that fluoranthene (Flt) was the fastest in decomposition, has the greatest value for the coefficient of photolysis (7.4 × 10(-3) h(-1)), and has less half-life, reaching 94 h when using a wavelength of 254 nm. The results indicated that the pyrene (Pyr) was more resistant to photolysis in comparison with indeno(1,2,3-cd) pyrene (IP) and fluoranthene (Flt). The results indicate that photolysis is a successful way to remediate the six studied PAHs compounds.
Asunto(s)
Fotólisis , Hidrocarburos Policíclicos Aromáticos/análisis , Contaminantes del Suelo/análisis , Fluorenos/análisis , Fluorenos/química , Semivida , Mutágenos , Hidrocarburos Policíclicos Aromáticos/química , Pirenos/análisis , Pirenos/química , Suelo/química , Contaminantes del Suelo/química , Rayos UltravioletaRESUMEN
It is an accepted fact that many food products that we eat today have the possibility of being contaminated by various chemicals used from planting to processing. These chemicals have been shown to cause illnesses for which some concerned government agencies have instituted regulatory mechanisms to minimize the risks and the effects on humans. It is for these concerns that reliable and accurate rapid determination techniques are needed to effect proper regulatory standards for the protection of people's nutritional health. This paper, therefore, reports the comparative evaluation of the extraction methods in the determination of atrazine (commonly used in agricultural as a herbicide) residues in foods using supercritical fluid chromatography (SFC) and enzyme-linked immunosorbent assay (ELISA) techniques. Supercritical fluid extraction (SFE) and microwave solvent extraction (MSE) methods were used to test samples of frozen vegetables, fruit juice, and jam from local food markets in Houston. Results showed a high recovery percentage of atrazine residues using supercritical fluid coupled with ELISA and SFC than with MSE. Comparatively, however, atrazine was detected 90.9 and 54.5% using SFC and ELISA techniques, respectively. ELISA technique was, however, less time consuming, lower in cost, and more sensitive with low detection limit of atrazine residues than SFC technique.
Asunto(s)
Atrazina/análisis , Cromatografía con Fluido Supercrítico/métodos , Ensayo de Inmunoadsorción Enzimática/métodos , Análisis de los Alimentos/métodos , Contaminación de Alimentos/análisis , Herbicidas/análisis , Cromatografía con Fluido Supercrítico/economía , Ensayo de Inmunoadsorción Enzimática/economía , Manipulación de Alimentos , Microondas , Solventes , TexasRESUMEN
Chlorinated dioxins are the group of environmental pollutants consisting of 210 chlorinated dibenzo-p-dioxins and dibenzofurans. They are highly toxic and persistent. They are lipophilic and can easily biomagnify in the food chain, hence posing a serious threat to human health. The daily consumption of low-level contaminated food, mainly of animal origin, leads to the accumulation of dioxins in the human body. The exposures of the general human population to dioxins and the specific issues of a risk assessment of dioxin pose serious concerns in public environmental and nutritional health. This paper reviews the analysis of chlorinated dioxins in ground beef. The sources of contamination of chlorinated dioxins in ground beef are first reviewed to form a basis for a clear understanding of the health implications of chlorinated dioxins in the human food chain and why it is necessary to monitor the level of dioxins in animal food products, especially ground beef. The methods of collection, sampling, and processing of ground beef, and the methods of sample clean up prior to the analysis, are reviewed. Emphasis is laid on the new techniques that are available and that might be effective in the analysis of chlorinated dioxins in ground beef. Among these new methods and techniques are: the synergistic combination of ELISA/GC/MS, direct sample introduction to /GC/MS-MS, automated clean-up method, and the supercritical fluid extraction methods. The possible treatments of results from each method and technique are discussed and their respective efficiencies are compared. Finally, quality control and quality assurance parameters are evaluated for levels of accuracy, reproducibility, and precision.
Asunto(s)
Monitoreo del Ambiente/métodos , Carne/análisis , Dibenzodioxinas Policloradas/metabolismo , Animales , Bovinos , Ensayo de Inmunoadsorción Enzimática/métodos , Ensayo de Inmunoadsorción Enzimática/tendencias , Contaminación de Alimentos/análisis , Cromatografía de Gases y Espectrometría de Masas/métodos , Cromatografía de Gases y Espectrometría de Masas/tendenciasRESUMEN
Multiple pesticide residues have been observed in some samples of canned foods, frozen vegetables, and fruit jam, which put the health of the consumers at risk of adverse effects. It is quite apparent that such a state of affairs calls for the need of more accurate, cost-effective, and rapid analytical techniques capable of detecting the minimum concentrations of the multiple pesticide residues. The aims of this paper were first, to determine the effectiveness of the use of Supercritical Fluid Extraction (SFE) and Supercritical Fluid Chromatography (SFC) techniques in the analysis of the levels of pesticide residues in canned foods, vegetables, and fruits; and second, to contribute to the promotion of consumer safety by excluding pesticide residue contamination from markets. Fifteen different types of imported canned and frozen fruits and vegetables samples obtained from the Houston local food markets were investigated. The major types of pesticides tested were pyrethroids, herbicides, fungicides, and carbamates. By using these techniques, the overall data showed 60.82% of the food samples had no detection of any pesticide residues under this investigation. On the other hand, 39.15% different food samples were contaminated by four different pyrethroid residues +/- RSD% ranging from 0.03 +/- 0.005 to 0.05 +/- 0.03 ppm, of which most of the pyrethroid residues were detected in frozen vegetables and strawberry jam. Herbicide residues in test samples ranged from 0.03 +/- 0.005 to 0.8 +/- 0.01 ppm. Five different fungicides, ranging from 0.05 +/- 0.02 to 0.8 +/- 0.1 ppm, were found in five different frozen vegetable samples. Carbamate residues were not detected in 60% of investigated food samples. It was concluded that SFE and SFC techniques were accurate, reliable, less time consuming, and cost effective in the analysis of imported canned foods, fruits, and vegetables and are recommended for the monitoring of pesticide contaminations.