Phase-change materials (PCMs) offer a compelling platform for active metaoptics, owing to their large index contrast and fast yet stable phase transition attributes. Despite recent advances in phase-change metasurfaces, a fully integrable solution that combines pronounced tuning measures, i.e., efficiency, dynamic range, speed, and power consumption, is still elusive. Here, we demonstrate an in situ electrically driven tunable metasurface by harnessing the full potential of a PCM alloy, Ge2Sb2Te5 (GST), to realize non-volatile, reversible, multilevel, fast, and remarkable optical modulation in the near-infrared spectral range. Such a reprogrammable platform presents a record eleven-fold change in the reflectance (absolute reflectance contrast reaching 80%), unprecedented quasi-continuous spectral tuning over 250 nm, and switching speed that can potentially reach a few kHz. Our scalable heterostructure architecture capitalizes on the integration of a robust resistive microheater decoupled from an optically smart metasurface enabling good modal overlap with an ultrathin layer of the largest index contrast PCM to sustain high scattering efficiency even after several reversible phase transitions. We further experimentally demonstrate an electrically reconfigurable phase-change gradient metasurface capable of steering an incident light beam into different diffraction orders. This work represents a critical advance towards the development of fully integrable dynamic metasurfaces and their potential for beamforming applications.
As renewable energy sources are either intermittent in nature or remote in location, developing cost-effective, sustainable, modular systems and technologies to store and transport renewables at an industrial scale is imperative. Storing cheap renewable electricity into chemical bonds (i.e., chemical energy storage) could be a transformative opportunity for reliable and resilient grid energy storage. This approach enables renewables to be stored and shipped similarly to fossil fuels. Currently, the chemical industry primarily consumes fossil feedstock as an energy source, which has been the standard for over a century. A paradigm shift is required to move toward a more sustainable route for chemical synthesis by electrifying and decarbonizing the modern chemical industry. As renewable electricity costs decrease, (photo)electrosynthesis is gaining interest for synthesizing high-value and high-energy fuels and molecules in a clean, sustainable, and decentralized manner.The nitrogen cycle is one of the Earth's most critical biogeochemical cycles since nitrogen is a vital element for all living organisms. Artificial nitrogen fixation via a (photo)electrochemical system powered by renewables provides an alternative route to resource- and carbon-intensive thermochemical processes. (Photo)electrochemical nitrogen fixation at a large scale necessitates the discovery of active, selective, and stable heterogeneous (photo)electrocatalysts. In addition, the use of advanced in situ and operando spectroscopic techniques is needed to pinpoint the underlying reaction mechanisms. The selectivity of nitrogen (N2) molecules on the catalyst surface and suppressing thermodynamically favorable side reactions (e.g., hydrogen evolution reaction) are the main bottlenecks in improving the rate of (photo)electrochemical nitrogen fixation in aqueous solutions. The rational design of electrode, electrolyte, and reactors is required to weaken the strong nitrogen-nitrogen triple bond (N≡N) at or near ambient conditions. This Account covers our group's recent advances in synthesizing shape-controlled hybrid plasmonic nanoparticles, including plasmonic-semiconductor and plasmonic-transition metal nanostructures with increased surface areas. The nanocatalysts' selectivity and activity toward nitrogen conversion are benchmarked in liquid- and gas-phase electrochemical systems. We leverage operando vibrational-type spectroscopy (i.e., surface-enhanced Raman spectroscopy (SERS)) to identify intermediate species relevant to nitrogen fixation at the electrode-electrolyte interface to gain mechanistic insights into reaction mechanisms, leading to the discovery of more efficient catalysts. Operando SERS revealed that the nitrogen reduction reaction (NRR) to ammonia on hybrid plasmonic-transition metal nanoparticle surfaces (e.g., Pd-Ag) occurs through an associative mechanism. In the NRR process, hydrazine (N2H4) is consumed as an intermediate species. A femtosecond pulsed laser is used to synthesize hybrid plasmonic photocatalysts with homogeneously distributed Pd atoms on a Au nanorod surface, resulting in enhanced optoelectronic and catalytic properties. The overarching goal is to develop modular photoelectrochemical systems for long-duration renewable energy storage. In the context of nitrogen fixation, we aim to propose strategies to manage the nitrogen cycle through the interconversion of N2 and active nitrogen-containing compounds (e.g., NH3, NOx), enabling a circular nitrogen economy with sustainable and positive social and economic outcomes. The versatile approaches presented in this Account can inform future opportunities in (photo)electrochemical energy conversion systems and solar fuel-based applications.
Utilizing solar energy for chemical transformations has attracted a growing interest in promoting the clean and modular chemical synthesis approach and addressing the limitations of conventional thermocatalytic systems. Under light irradiation, noble metal nanoparticles, particularly those characterized by localized surface plasmon resonance, commonly known as plasmonic nanoparticles, generate a strong electromagnetic field, excited hot carriers, and photothermal heating. Plasmonic nanoparticles enabling efficient absorption of light in the visible range have moderate catalytic activities. However, the catalytic performance of a plasmonic nanoparticle can be significantly enhanced by incorporating a highly catalytically active metal domain onto its surface. In this study, we demonstrate that femtosecond laser-induced atomic redistribution of metal domains in bimetallic Au-Pd nanorods (NRs) can enhance its photocurrent response by 2-fold compared to parent Au-Pd NRs. We induce structure changes on Au-Pd NRs by irradiating them with a femtosecond pulsed laser at 808 nm to precisely redistribute Pd atoms on AuNR surfaces, resulting in modified electronic and optical properties and, thereby, enhanced catalytic activity. We also investigate the trade-off between the effect of light absorption and catalytic activity by optimizing the structure and composition of bimetallic Au-Pd nanoparticles. This work provides insight into the design of hybrid plasmonic-catalytic nanostructures with well-tailored geometry, composition, and structure for solar-fuel-based applications.
Efficient hybrid plasmonic-photonic metasurfaces that simultaneously take advantage of the potential of both pure metallic and all-dielectric nanoantennas are identified as an emerging technology in flat optics. Nevertheless, postfabrication tunable hybrid metasurfaces are still elusive. Here, we present a reconfigurable hybrid metasurface platform by incorporating the phase-change material Ge2Sb2Te5 (GST) into metal-dielectric meta-atoms for active and nonvolatile tuning of properties of light. We systematically design a reduced-dimension meta-atom, which selectively controls the hybrid plasmonic-photonic resonances of the metasurface via the dynamic change of optical constants of GST without compromising the scattering efficiency. As a proof-of-concept, we experimentally demonstrate two tunable metasurfaces that control the amplitude (with relative modulation depth as high as ≈80%) or phase (with tunability >230°) of incident light promising for high-contrast optical switching and efficient anomalous to specular beam deflection, respectively. Our findings further substantiate dynamic hybrid metasurfaces as compelling candidates for next-generation reprogrammable meta-optics.
Lung failure is the main reason for mortality in COVID-19 patients, caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). To date, no drug has been clinically approved for treatment of COVID-19. Nanotechnology has a great potential in contributing significantly to the fight against COVID-19 by developing effective therapies that can selectively eradicate the respiratory virus load. We propose a novel COVID-19 management approach that is efficient in eliminating the virus load from the airways and protecting the lungs from the fatal effects of the virus. This approach relies on targeting the virus using ACE-2-functionalized gold nanorods (AuNRs) followed by irradiation with near-infrared (NIR) light for the selective eradication of SARS-CoV-2 without off-target effects, i.e., targeted plasmonic photothermal therapy. Using discrete dipole approximation (DDA), we quantitatively determined the efficiency of AuNRs (31 nm × 8 nm) in absorbing NIR when present at different orientations relative to one another on the surface of the virus. The safety and the local administration of AuNRs using a well-tolerated flexible bronchoscopy technique, commonly used for hospitalized COVID-19 patients, ensure feasibility and clinical translation. While requiring further research, we anticipate this approach to result in a first-line treatment for hospitalized COVID-19 patients that are experiencing severe respiratory conditions or belong to a high-risk population, e.g., seniors and diabetic patients.
Development of optical nanobiosensors has emerged as one of the most important bioresearch areas of interest over the past decades especially in the modern innovations in the design and utilization of sensing platforms. The application of nanobiosensors has been accelerated with the introduction of plasmonic NPs, which overcome the most of the limitations in the case of conventional optical nanobiosensors. Since the plasmonic AuNPs-based nanobiosensors provide high potential achievements to develop promising platforms in fully integrated multiplex assays, some well-developed investigations are clearly required to improve the current technologies and integration of multiple signal inputs. Therefore, in this literature, we summarized the performance and achievements of optical nanobiosensors according to plasmonic rules of AuNPs, including SPR, LSPR, SERS and chiroptical phenomena. Also, we investigated the effects of the physicochemical properties of AuNPs such as size, shape, composition, and assembly on the plasmonic signal propagation in AuNPs-based nanobiosensors. Moreover, we presented an overview on the current state of plasmonic AuNPs-based nanobiosensors in the biomedical activities. Besides, this paper looks at the current and future challenges and opportunities of ongoing efforts to achieve the potential applications of AuNPs-based optical plasmonic nanobiosensors in integration with other nanomaterials. Taken together, the main focus of this paper is to provide some applicable information to develop current methodologies in fabrication of potential AuNPs-based nanobiosensors for detection of a wide range of analytes.
BACKGROUND: Gold nanoparticles (AuNPs) with unique physicochemical properties have received a great deal of interest in the field of biological, chemical and biomedical implementations. Despite the widespread use of AuNPs in chemical and biological sensing, catalysis, imaging and diagnosis, and more recently in therapy, no comprehensive summary has been provided to explain how AuNPs could aid in developing improved sensing and catalysts systems as well as medical settings. SCOPE OF REVIEW: The chemistry of Au-based nanosystems was followed by reviewing different applications of Au nanomaterials in biological and chemical sensing, catalysis, imaging and diagnosis by a number of approaches, and finally synergistic combination therapy of different cancers. Afterwards, the clinical impacts of AuNPs, future application of AuNPs, and opportunities and challenges of AuNPs application were also discussed. MAJOR CONCLUSIONS: AuNPs show exclusive colloidal stability and are considered as ideal candidates for colorimetric detection, catalysis, imaging, and photothermal transducers, because their physicochemical properties can be tuned by adjusting their structural dimensions achieved by the different manufacturing methods. GENERAL SIGNIFICANCE: This review provides some details about using AuNPs in sensing and catalysis applications as well as promising theranostic nanoplatforms for cancer imaging and diagnosis, and sensitive, non-invasive, and synergistic methods for cancer treatment in an almost comprehensive manner.
Biosensing Techniques , Metal Nanoparticles/therapeutic use , Molecular Imaging/methods , Nanostructures/therapeutic use , Catalysis , Colorimetry , Gold/chemistry , Gold/therapeutic use , Humans , Metal Nanoparticles/chemistry , Nanostructures/chemistry
Due to the considerable amount of applications of gold nanoparticles (AuNPs) in biological systems, there is a great need for an improved methodology to quantitatively measure the uptake of AuNPs in cells. Flow cytometry has the ability to measure intracellular AuNPs by collecting the light scattering from a large population of live cells through efficient single cell analysis. Traditionally, the side scattering setting of the flow cytometer, which is associated with a 488 nm excitation laser (SSC channel), is used to detect nanoparticle uptake. This method is limited as AuNPs do not have the optimized response when excited with this laser. Here, we reported that the use of more red-shifted excitation lasers will greatly enhance the optical signal needed for the flow cytometry-based detection of AuNSs (26 nm in diameter) and AuNRs (67 nm × 33 nm, length × width) uptake in triple negative breast cancer cells (MDA-MB-231).
Flow Cytometry/instrumentation , Gold/pharmacokinetics , Metal Nanoparticles/analysis , Biological Transport , Cell Line, Tumor , Equipment Design , Female , Gold/analysis , Humans , Lasers , Particle Size , Triple Negative Breast Neoplasms/metabolism
We present a systematic study of the effect of higher-multipolar order plasmon modes on the spectral response and plasmonic coupling of silver nanoparticle dimers at nanojunction separation and introduce a coupling mechanism. The most prominent plasmonic band within the extinction spectra of coupled resonators is the dipolar coupling band. A detailed calculation of the plasmonic coupling between equivalent particles suggests that the coupling is not limited to the overlap between the main bands of individual particles but can also be affected by the contribution of the higher-order modes in the multipolar region. This requires an appropriate description of the mechanism that goes beyond the general coupling phenomenon introduced as the plasmonic ruler equation in 2007. In the present work, we found that the plasmonic coupling of nearby Ag nanocubes does not only depend on the plasmonic properties of the main band. The results suggest the decay length of the higher-order plasmon mode is more sensitive to changes in the magnitude of the interparticle axis and is a function of the gap size. For cubic particles, the contribution of the higher-order modes becomes significant due to the high density of oscillating dipoles localized on the corners. This gives rise to changes in the decay length of the plasmonic ruler equation. For spherical particles, as the size of the particle increases (i.e., ≥80 nm), the number of dipoles increases, which results in higher dipole-multipole interactions. This exhibits a strong impact on the plasmonic coupling, even at long separation distances (20 nm).
Over the past two decades, the development of plasmonic nanoparticle (NPs), especially gold (Au) NPs, is being pursued more seriously in the medical fields such as imaging, drug delivery, and theranostic systems. However, there is no comprehensive review on the effect of the physical and chemical parameters of AuNPs on their plasmonic properties as well as the use of these unique characteristic in medical activities such as imaging and therapeutics. Therefore, in this literature the surface plasmon resonance (SPR) modeling of AuNPs was accurately captured toward precision medicine. Indeed, we investigated the importance of plasmonic properties of AuNPs in optical manipulation, imaging, drug delivery, and photothermal therapy (PTT) of cancerous cells based on their physicochemical properties. Finally, some challenges regarding the commercialization of AuNPs in future medicine such as, cytotoxicity, lack of standards for medical applications, high cost, and time-consuming process were discussed.
Gold/administration & dosage , Metal Nanoparticles/administration & dosage , Animals , Diagnostic Imaging , Drug Delivery Systems , Humans , Neoplasms/diagnostic imaging , Neoplasms/therapy , Optical Phenomena , Phototherapy
We report for the first time the usage of plasmonically enhanced Raman spectroscopy (PERS) to directly monitor the dynamics of pharmacologically generated hemeoxygenase-1 (HO-1) by evaluating the kinetics of formation of carbon monoxide (CO), one of the metabolites of HO-1 activation, in live cells during cisplatin treatment. Being an endogenous signaling molecule, CO plays an important role in cancer regression. Many aspects of HO-1's and CO's functions in biology are still unclear largely due to the lack of technological tools for the real-time monitoring of their dynamics in live cells and tissues. In this study, we found that, together with nuclear region-targeted gold nanocubes (AuNCs), cisplatin treatment can dramatically trigger the activation of HO-1 and thereby the rate and production of CO in mammalian cells in a dose-dependent manner. Though quantitative molecular data revealed that a lower concentration of cisplatin up-regulates HO-1 expression in cancer cells, PERS data suggest that it poorly facilitates the activation of HO-1 and thereby the production of CO. However, at a higher dose, cisplatin along with AuNCs could significantly enhance the activation of HO-1 in cancer cells, which could be probed in real-time by monitoring the CO generation by using PERS. Under the same conditions, the rate of formation of CO in healthy cells was relatively higher in comparison to the cancer cells. Additionally, molecular data revealed that AuNCs have the potential to suppress the up-regulation of HO-1 in cancer cells during cisplatin treatment at a lower concentration. As up-regulation of HO-1 has a significant role in cell adaptation to oxidative stress in cancer cells, the ability of AuNCs in suppressing the HO-1 overexpression will have a remarkable impact in the development of nanoformulations for combination cancer therapy. This exploratory study demonstrates the unique possibilities of PERS in the real-time monitoring of endogenously generated CO and thereby the dynamics of HO-1 in live cells, which could expedite our understanding of the signaling action of CO and HO-1 in cancer progression.
For localized tumors, gold nanorod (AuNR)-assisted plasmonic photothermal therapy (PPTT) is a potentially effective alternative to traditional surgery, in which AuNRs absorb near-infrared light and convert it to heat in order to kill cancer cells. However, for large tumors (volume ≥ 20 cm3), an uneven distribution of AuNRs might cause inhomogeneity of the heat distribution inside the tumor. Surgery is frequently recommended for removing large tumors, but it is associated with a high risk of cancer recurrence and metastasis. Here, we applied PPTT before surgery, which showed improved treatment for large tumors. We divided the animals (eight cats/dogs) into two groups: Group I (control), where three cases were solely treated with surgery, laser, or AuNRs alone, resulting in recurrence and metastasis; and Group II, where animals were treated with PPTT before surgery. In Group II, four out of the five cases had tumor regression without any recurrence or metastasis. Interestingly, we observed that applying PPTT before surgery displayed reduced bleeding during tumor removal, supported by histopathology that showed altered blood vessels. In conclusion, our study showed that applying AuNR-assisted PPTT (AuNRs-PPTT) before surgery could significantly affect blood vessels inside the tumor, leading to a decreased amount of bleeding during surgery, which can potentially decrease the risk of metastasis and blood loss during surgery.
While Li-ion battery cathode-electrolyte interfaces (CEIs) have been extensively investigated in recent decades, accurately identifying the chemical nature and tracking the dynamics of the CEIs during electrochemical cycling still remain a grand challenge. Here we report our findings in the investigation into the dynamic evolution of the interface between a LiNi0.33Co0.33Mn0.33O2 (LNMC) cathode and an ethylene carbonate/dimethyl carbonate (EC/DMC)-based electrolyte using surface-enhanced Raman spectroscopy (SERS) performed on a model cell under typical battery operating conditions. In particular, the strong SERS activity provided by a monolayer of Au nanocubes deposited on a model LNMC electrode (additive-free) enables quasi-quantitative assessment of the CEI evolution during cycling, proving information vital to revealing the dynamics of the species adsorbed on the LNMC surface as a function of cell potential. Furthermore, our theoretical calculation, which is based on the interaction between a model interface-bound molecule and a model LNMC surface, agrees with our experimental observation. The carefully designed operando SERS platform has demonstrated high sensitivity, good surface specificity, and excellent compatibility with extensive electrochemical measurements; it is also applicable to fundamental studies of dynamic interfaces in other electrochemical energy storage and conversion systems.
An electrochemical nitrogen reduction reaction (NRR) could provide an alternative pathway to the Haber-Bosch process for clean, sustainable, and decentralized NH3 production when it is coupled with renewably derived electricity sources. Developing an electrocatalyst that overcomes sluggish kinetics due to the challenges associated with N2 adsorption and cleavage and that also produces NH3 with a reasonable yield and efficiency is an urgent need. Here, we engineer the size and density of pores in the walls of hollow Au nanocages (AuHNCs) by tuning their peak localized surface plasmon resonance (LSPR); in this way, we aim to enhance the rate of electroreduction of N2 to NH3. The interdependency between the pore size/density, the peak LSPR position, the silver content in the cavity, and the total surface area of the nanoparticle should be realized for further optimization of hollow plasmonic nanocatalysts in electrochemical NRRs.
Most cancer-related deaths come from metastasis. It was recently discovered that nanoparticles could inhibit cancer cell migration. Whereas most researchers focus on single-cell migration, the effect of nanoparticle treatment on collective cell migration has not been explored. Collective migration occurs commonly in many types of cancer metastasis, where a group of cancer cells move together, which requires the contractility of the cytoskeleton filaments and the connection of neighboring cells by the cell junction proteins. Here, we demonstrate that gold nanorods (AuNRs) and the introduction of near-infrared light could inhibit the cancer cell collective migration by altering the actin filaments and cell junctions with significantly triggered phosphorylation changes of essential proteins, using mass spectrometry-based phosphoproteomics. Further observation using super-resolution stochastic optical reconstruction microscopy (STORM) showed the actin cytoskeleton filament bundles were disturbed, which is difficult to differentiate under a normal fluorescence microscope. The decreased expression level of N-cadherin junctions and morphological changes of tight junction protein zonula occludens 2 were also observed. All of these results indicate possible functions of the AuNR treatments in regulating and remodeling the actin filaments and cell junction proteins, which contribute to decreasing cancer cell collective migration.
Actins/metabolism , Gold/pharmacology , Intercellular Junctions/drug effects , Metal Nanoparticles/chemistry , Phototherapy , Cell Movement/drug effects , Cell Proliferation/drug effects , Cell Survival/drug effects , Gold/chemistry , HeLa Cells , Humans , Infrared Rays , MCF-7 Cells , Tumor Cells, Cultured
Understanding the nature of interfacial defects of materials is a critical undertaking for the design of high-performance hybrid electrodes for photocatalysis applications. Theoretical and computational endeavors to achieve this have touched boundaries far ahead of their experimental counterparts. However, to achieve any industrial benefit out of such studies, experimental validation needs to be systematically undertaken. In this sense, we present herein experimental insights into the synergistic relationship between the lattice position and oxidation state of tungsten ions inside a TiO2 lattice, and the respective nature of the created defect states. Consequently, a roadmap to tune the defect states in anodically-fabricated, ultrathin-walled W-doped TiO2 nanotubes is proposed. Annealing the nanotubes in different gas streams enabled the engineering of defects in such structures, as confirmed by XRD and XPS measurements. While annealing under hydrogen stream resulted in the formation of abundant Wn+ (n < 6) ions at the interstitial sites of the TiO2 lattice, oxygen- and air-annealing induced W6+ ions at substitutional sites. EIS and Mott-Schottky analyses indicated the formation of deep-natured trap states in the hydrogen-annealed samples, and predominantly shallow donating defect states in the oxygen- and air-annealed samples. Consequently, the photocatalytic performance of the latter was significantly higher than those of the hydrogen-annealed counterparts. Upon increasing the W content, photoelectrochemical performance deteriorated due to the formation of WO3 crystallites that hindered charge transfer through the photoanode, as evident from the structural and chemical characterization. To this end, this study validates the previous theoretical predictions on the detrimental effect of interstitial W ions. In addition, it sheds light on the importance of defect states and their nature for tuning the photoelectrochemical performance of the investigated materials.
As a noninvasive molecular analysis technique, ultraviolet resonance Raman (UVRR) spectroscopy represents a label-free method suitable for characterizing biomolecules. Using UVRR spectroscopy, we collected spectral fingerprints of UV absorbing cellular components, including proteins, nucleic acids, and unsaturated lipids. This knowledge was used to guide the assignment of spectra derived from intact human cell lines (i. e., HSC-3 and HaCaT) and from the apoptotic events induced by cisplatin. Notably, a jet-flow system was employed to generate flowing cell suspensions during UVRR measurements, minimizing UV-induced damage. A spectral marker is established based on the ratio of Raman intensities at 1488 and 1655â cm-1 ; this ratio correlates to the level of cell death due to apoptosis. Collectively, this work demonstrates that UVRR spectroscopy is a sensitive and informative probe of cellular physiology and molecular composition. The molecular insight obtained from UVRR measurements can be used to improve understanding of therapeutic treatment and to guide drug development and the choice of therapeutic agents.
Apoptosis/drug effects , Organoplatinum Compounds/pharmacology , Cell Line , Dose-Response Relationship, Drug , Humans , Organoplatinum Compounds/chemistry , Spectrum Analysis, Raman , Structure-Activity Relationship
To date, a variety of biological assays such as immunostaining, western blotting, enzyme-linked immunosorbent assay (ELISA), and flow cytometry have been used to analyze and trace important biological events and therapies. In addition to these techniques, the application of microscopic analytical techniques such as matrix-assisted laser desorption/ionization-time of flight (MALDI-ToF) mass spectrometry and Raman spectroscopy is increasing, allowing information to be obtained at the molecular level. In this study, we have conducted real-time tracking of autophagy, a cellular process that has recently been attracting significant attention. To achieve this purpose, we performed Raman spectroscopy on human oral squamous carcinoma cells (HSC3) incubated with bioactive molecule-modified plasmonic gold nanoparticles. The bioactive molecule-nanoparticle complexes were synthesized using fucoidan, a biopolymer that induces autophagy. By using this platform, it was possible to trace the entire autophagic process successively from cell introduction to autophagic apoptosis. This fusion of nanocomposites and spectroscopic techniques is expected to enable more complex biological processes to be pursued at the molecular level in the future.
Ultraviolet resonance Raman (UVRR) spectroscopy is a label-free method to define biomacromolecular interactions with anticancer compounds. Using UVRR, we describe the binding interactions of two Pt(II) compounds, cisplatin (cis-diamminedichloroplatinum(II)) and its isomer, transplatin, with nucleotides and genomic DNA. Cisplatin binds to DNA and other cellular components and triggers apoptosis, whereas transplatin is clinically ineffective. Here, a 244 nm UVRR study shows that purine UVRR bands are altered in frequency and intensity when mononucleotides are treated with cisplatin. This result is consistent with previous suggestions that purine N7 provides the cisplatin-binding site. The addition of cisplatin to DNA also causes changes in the UVRR spectrum, consistent with binding of platinum to purine N7 and disruption of hydrogen-bonding interactions between base pairs. Equally important is that transplatin treatment of DNA generates similar UVRR spectral changes, when compared to cisplatin-treated samples. Kinetic analysis, performed by monitoring decreases of the 1492 cm-1 band, reveals biphasic kinetics and is consistent with a two-step binding mechanism for both platinum compounds. For cisplatin-DNA, the rate constants (6.8 × 10-5 and 6.5 × 10-6 s-1) are assigned to the formation of monofunctional adducts and to bifunctional, intrastrand cross-linking, respectively. In transplatin-DNA, there is a 3.4-fold decrease in the rate constant of the slow phase, compared with the cisplatin samples. This change is attributed to generation of interstrand, rather than intrastrand, adducts. This longer reaction time may result in increased competition in the cellular environment and account, at least in part, for the lower pharmacological efficacy of transplatin.
Antineoplastic Agents/pharmacology , Cisplatin/pharmacology , Cross-Linking Reagents/pharmacology , DNA/metabolism , Spectrum Analysis, Raman/instrumentation , Animals , Cattle , DNA/chemistry , Equipment Design , Spectrum Analysis, Raman/methods , Ultraviolet Rays
