RESUMEN
Ensuring the security of China's rice harvest is imperative for sustainable food production. The existing study addresses a critical need by employing a comprehensive approach that integrates multi-source data, including climate, remote sensing, soil properties and agricultural statistics from 2000 to 2017. The research evaluates six artificial intelligence (AI) models including machine learning (ML), deep learning (DL) models and their hybridization to predict rice production across China, particularly focusing on the main rice cultivation areas. These models were random forest (RF), extreme gradient boosting (XGB), conventional neural network (CNN) and long short-term memory (LSTM), and the hybridization of RF with XGB and CNN with LSTM based on eleven combinations (scenarios) of input variables. The main results identify that hybrid models have performed better than single models. As well, the best scenario was recorded in scenarios 8 (soil variables and sown area) and 11 (all variables) based on the RF-XGB by decreasing the root mean square error (RMSE) by 38% and 31% respectively. Further, in both scenarios, RF-XGB generated a high correlation coefficient (R2) of 0.97 in comparison with other developed models. Moreover, the soil properties contribute as the predominant factors influencing rice production, exerting an 87% and 53% impact in east and southeast China, respectively. Additionally, it observes a yearly increase of 0.16 °C and 0.19 °C in maximum and minimum temperatures (Tmax and Tmin), coupled with a 20 mm/year decrease in precipitation decline a 2.23% reduction in rice production as average during the study period in southeast China region. This research provides valuable insights into the dynamic interplay of environmental factors affecting China's rice production, informing strategic measures to enhance food security in the face of evolving climatic conditions.
Asunto(s)
Aprendizaje Automático , Oryza , Oryza/crecimiento & desarrollo , China , Suelo/química , Redes Neurales de la Computación , Agricultura/métodos , ClimaRESUMEN
The rapid advancement of global economic integration and urbanization has severely damaged the stability of the ecological environment and hindered the ecological carbon sink capacity. In this study, we evaluated the spatiotemporal evolution pattern of landscape ecological risk (LER) in the Loess Plateau from 2010 to 2020. This was examined under the driving mechanism of human and natural dual factors. We combined the random forest algorithm with the Markov chain to jointly simulate and predict the development trend of LER in 2030. From 2010 to 2020, LER on the Loess Plateau showed a distribution pattern with higher values in the southeast and lower values in the northwest. Under the interaction of human and natural factors, annual precipitation exerted the strongest constraint on LER. The driving of land use and natural factors significantly influenced the spatial differentiation of the LER, with a q-value >0.30. In all three projected scenarios for 2030, there was an increase in construction land area and a significant reduction in cultivated land area. The urban development scenario showed the greatest expansion of high-risk areas, with a 5.29 % increase. Conversely, the ecological protection scenario showed a 1.53 % increase in high-risk areas. The findings have provided a reference for ecological risk prevention and control, and sustainable development of the ecological environment in arid regions.
Asunto(s)
Conservación de los Recursos Naturales , Urbanización , Ecosistema , China , Desarrollo Sostenible , Humanos , Medición de Riesgo , Monitoreo del Ambiente/métodos , EcologíaRESUMEN
Liquefaction is a devastating consequence of earthquakes that occurs in loose, saturated soil deposits, resulting in catastrophic ground failure. Accurate prediction of such geotechnical parameter is crucial for mitigating hazards, assessing risks, and advancing geotechnical engineering. This study introduces a novel predictive model that combines Extreme Learning Machine (ELM) with Dingo Optimization Algorithm (DOA) to estimate strain energy-based liquefaction resistance. The hybrid model (ELM-DOA) is compared with the classical ELM, Adaptive Neuro-Fuzzy Inference System with Fuzzy C-Means (ANFIS-FCM model), and Sub-clustering (ANFIS-Sub model). Also, two data pre-processing scenarios are employed, namely traditional linear and non-linear normalization. The results demonstrate that non-linear normalization significantly enhances the prediction performance of all models by approximately 25% compared to linear normalization. Furthermore, the ELM-DOA model achieves the most accurate predictions, exhibiting the lowest root mean square error (484.286 J/m3), mean absolute percentage error (24.900%), mean absolute error (404.416 J/m3), and the highest correlation of determination (0.935). Additionally, a Graphical User Interface (GUI) has been developed, specifically tailored for the ELM-DOA model, to assist engineers and researchers in maximizing the utilization of this predictive model. The GUI provides a user-friendly platform for easy input of data and accessing the model's predictions, enhancing its practical applicability. Overall, the results strongly support the proposed hybrid model with GUI serving as an effective tool for assessing soil liquefaction resistance in geotechnical engineering, aiding in predicting and mitigating liquefaction hazards.
RESUMEN
As a non-linear phenomenon that varies along with agro-climatic conditions alongside many other factors, Evapotranspiration (ET) process represents a complexity when be assessed especially if there is a data scarcity in the weather data. However, even under such a data scarcity, the accurate estimates of ET values remain necessary for precise irrigation. So, the present study aims to: i) evaluate the performance of six hybrid machine learning (ML) models in estimating the monthly actual ET values under different agro-climatic conditions in China for seven provinces (Shandong, Jiangsu, Zhejiang, Fujian, Jiangxi, Hubei, and Henan), and ii) select the best-developed model based on statistical metrics and reduce errors between predicted and actual ET (AET) values. AET datasets were divided into 78% for model training (from 1958 to 2007) and the remaining was used for testing (from 2008 to 2021). Deep Neural Networks (DNN) was used as a standalone model at first then the stacking method was applied to integrate DNN with data-driven models such as Additive regression (AR), Random Forest (RF), Random Subspace (RSS), M5 Burned Tree (M5P) and Reduced Error Purning Tree (REPTree). Partial Auto-Correlation Function (PACF) was used for selection of the best lags inputs to the developed models. Results have revealed that DNN-based hybrid models held better performance than non-hybrid DNN models, such that the DNN-RF algorithm outperformed others during both training and testing stages, followed by DNN-RSS. This model has acquired the best values of every statistical measure [MAE (10.8, 12.9), RMSE (15.6, 17.4), RAE (31.9%, 41.4%), and RRSE (39.3%, 47.2%)] for training and testing, respectively. In contrast, the DNN model held the worst performance [MAE (14.9, 13.7), RMSE (20.1, 18.2), RAE (43.9%, 43.7%), and RRSE (50.6%, 49.3%)], for training and testing, respectively. Results from the study presented have revealed the capability of DNN-based hybrid models for long-term predictions of the AET values. Moreover, the DNN-RF model has been suggested as the most suitable model to improve future investigation for AET predictions, which could benefit the enhancement of the irrigation process and increase crop yield.
Asunto(s)
Heurística , Aprendizaje Automático , China , Redes Neurales de la Computación , Bosques AleatoriosRESUMEN
Trash mulches are remarkably effective in preventing soil erosion, reducing runoff-sediment transport-erosion, and increasing infiltration. The study was carried out to observe the sediment outflow from sugar cane leaf (trash) mulch treatments at selected land slopes under simulated rainfall conditions using a rainfall simulator of size 10 m × 1.2 m × 0.5 m with the locally available soil material collected from Pantnagar. In the present study, trash mulches with different quantities were selected to observe the effect of mulching on soil loss reduction. The number of mulches was taken as 6, 8 and 10 t/ha, three rainfall intensities viz. 11, 13 and 14.65 cm/h at 0, 2 and 4% land slopes were selected. The rainfall duration was fixed (10 minutes) for every mulch treatment. The total runoff volume varied with mulch rates for constant rainfall input and land slope. The average sediment concentration (SC) and sediment outflow rate (SOR) increased with the increasing land slope. However, SC and outflow decreased with the increasing mulch rate for a fixed land slope and rainfall intensity. The SOR for no mulch-treated land was higher than trash mulch-treated lands. Mathematical relationships were developed for relating SOR, SC, land slope, and rainfall intensity for a particular mulch treatment. It was observed that SOR and average SC values correlated with rainfall intensity and land slope for each mulch treatment. The developed models' correlation coefficients were more than 90%.
Asunto(s)
Sedimentos Geológicos , Erosión del Suelo , Lluvia , Suelo , ChinaRESUMEN
Fine particulate matter (PM2.5) has become a prominent pollutant due to rapid economic development, urbanization, industrialization, and transport activities, which has serious adverse effects on human health and the environment. Many studies have employed traditional statistical models and remote-sensing technologies to estimate PM2.5 concentrations. However, statistical models have shown inconsistency in PM2.5 concentration predictions, while machine learning algorithms have excellent predictive capacity, but little research has been done on the complementary advantages of diverse approaches. The present study proposed the best subset regression model and machine learning approaches, including random tree, additive regression, reduced error pruning tree, and random subspace, to estimate the ground-level PM2.5 concentrations over Dhaka. This study used advanced machine learning algorithms to measure the effects of meteorological factors and air pollutants (NOX, SO2, CO, and O3) on the dynamics of PM2.5 in Dhaka from 2012 to 2020. Results showed that the best subset regression model was well-performed for forecasting PM2.5 concentrations for all sites based on the integration of precipitation, relative humidity, temperature, wind speed, SO2, NOX, and O3. Precipitation, relative humidity, and temperature have negative correlations with PM2.5. The concentration levels of pollutants are much higher at the beginning and end of the year. Random subspace is the optimal model for estimating PM2.5 because it has the least statistical error metrics compared to other models. This study suggests ensemble learning models to estimate PM2.5 concentrations. This study will help quantify ground-level PM2.5 concentration exposure and recommend regional government actions to prevent and regulate PM2.5 air pollution. Supplementary Information: The online version contains supplementary material available at 10.1007/s11869-023-01329-w.
RESUMEN
Groundwater management requires a systematic approach since it is crucial to the long-term viability of livelihoods and regional economies all over the world. There is insufficient groundwater management and difficulties in storage plans as a result of increased population, fast urbanisation, and climate change, as well as unpredictability in rainfall frequency and intensity. Groundwater exploration using remote sensing (RS) data and geographic information system (GIS) has become a breakthrough in groundwater research, assisting in the assessment, monitoring, and conservation of groundwater resources. The study region is the Mand catchment of the Mahanadi basin, covering 5332.07 km2 and is located between 21°42'15.525â³N and 23°4'19.746â³N latitude and 82°50'54.503â³E and 83°36'1.295â³E longitude in Chhattisgarh, India. The research comprises the generation of thematic maps, delineation of groundwater potential zones and the recommendation of structures for efficiently and successfully recharging groundwater utilising RS and GIS. Groundwater Potential Zones (GPZs) were identified with nine thematic layers using RS, GIS, and the Multi-Criteria Decision Analysis (MCDA) method. Satty's Analytic Hierarchy Process (AHP) was used to rank the nine parameters that were chosen. The generated GPZs map indicated regions with very low, low to medium, medium to high, and very high groundwater potential encompassing 962.44 km2, 2019.92 km2, 969.19 km2, and 1380.42 km2 of the study region, respectively. The GPZs map was found to be very accurate when compared with the groundwater fluctuation map, and it is used to manage groundwater resources in the Mand catchment. The runoff of the study area can be accommodated by the computing subsurface storage capacity, which will raise groundwater levels in the low and low to medium GPZs. According to the study results, various groundwater recharge structures such as farm ponds, check dams and percolation tanks were suggested in appropriate locations of the Mand catchment to boost groundwater conditions and meet the shortage of water resources in agriculture and domestic use. This study demonstrates that the integration of GIS can provide an efficient and effective platform for convergent analysis of various data sets for groundwater management and planning.
RESUMEN
Characterized by their high spatiotemporal variability, rainfalls are difficult to predict, especially under climate change. This study proposes a multilayer perceptron (MLP) network optimized by Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Firefly Algorithm (FFA), and Teleconnection Pattern Indices - such as North Atlantic Oscillation (NAO), Southern Oscillations (SOI), Western Mediterranean Oscillation (WeMO), and Mediterranean Oscillation (MO) - to model monthly rainfalls at the Sebaou River basin (Northern Algeria). Afterward, we compared the best-optimized MLP to the application of the Extreme Learning Machine optimized by the Bat algorithm (Bat-ELM). Assessment of the various input combinations revealed that the NAO index was the most influential parameter in improving the modeling accuracy. The results indicated that the MLP-FFA model was superior to MLP-GA and MLP-PSO for the testing phase, presenting RMSE values equal to 33.36, 30.50, and 29.92 mm, respectively. The comparison between the best MLP model and Bat-ELM revealed the high performance of Bat-ELM for rainfall modeling at the Sebaou River basin, with RMSE reducing from 29.92 to 11.89 mm and NSE value from 0.902 to 0.985 during the testing phase. This study shows that incorporating the North Atlantic Oscillation (NAO) as a predictor improved the accuracy of artificial intelligence systems optimized by metaheuristic algorithms, specifically Bat-ELM, for rainfall modeling tasks such as filling in missing data of rainfall time series.
RESUMEN
The information about the subsurface structure, type of fluids present in the reservoir, and physical properties of the rocks is essential for identifying potential leads. The integrated approach of petrophysical analysis, seismic data interpretation, seismic attributes analysis, lithology, mineralogy identification, and Gassmann fluid substitution were used for this purpose. The structural interpretation with the help of seismic data indicated the extensional regime with horst and graben structures in the study area. The two negative flower structures are cutting the entire Cretaceous deposits. The depth contour map also indicate favorable structures for hydrocarbon accumulation. The four possible reservoir zones in the Sawan-01 well and two zones in the Judge-01 well at B sand and C sand levels are identified based on well data interpretation. The main lithology of the Lower Goru Formation is sandstone with thin beds of shale. The clay types confirm the marine depositional environment for Lower Goru Formation. The water substitution in the reservoir at B sand and C sand levels indicated increased P-wave velocity and density. The water substitution affected the shear wave velocity varies slightly due to density changes. The cross plots of P-impedance versus Vp/Vs ratio differentiate the sandstone with low P-impedance and low Vp/Vs ratio from shaly sandstone with high values in the reservoir area. The P-impedance and S-impedance cross plot indicate increasing gas saturation with a decrease in impedance values. The low values of Lambda-Rho and Mu-Rho indicated the gas sandstone in the cross plot.
RESUMEN
The carbonate reservoir quality is strongly reliant on the compaction process during sediment burial and other processes such as cementation and dissolution. Porosity and pore pressure are the two main factors directly affected by mechanical and chemical compactions. Porosity reduction in these carbonates is critically dependent on the overburden stress and subsidence rate. A variable sediment influx in younger basins may lead to changes in the reservoir quality in response to increasing lithostatic pressure. Deposition of molasse sediments as a result of the Himalayan orogeny caused variations in the sedimentation influx in the Potwar Basin of Pakistan throughout the Neogene times. The basic idea of this study is to analyze the carbonate reservoir quality variations induced by the compaction and variable sediment influx. The Sakesar Limestone of the Eocene age, one of the proven carbonate reservoirs in the Potwar Basin, shows significant changes in the reservoir quality, specifically in terms of porosity and pressure. A 3D seismic cube (10 km2) and three wells of the Balkassar field are used for this analysis. To determine the vertical and lateral changes of porosity in the Balkassar area, porosity is computed from both the log and seismic data. The results of both the data sets indicate 2-4% porosities in the Sakesar Limestone. The porosity reduction rate with respect to the lithostatic pressure computed with the help of geohistory analysis represents a sharp decrease in porosity values during the Miocene times. Pore pressure predictions in the Balkassar OXY 01 well indicate underpressure conditions in the Sakesar Limestone. The Eocene limestones deposited before the collision of the Indian plate had enough time for fluid expulsion and show underpressure conditions with high porosities.
RESUMEN
Agriculture, meteorological, and hydrological drought is a natural hazard which affects ecosystems in the central India of Maharashtra state. Due to limited historical data for drought monitoring and forecasting available in the central India of Maharashtra state, implementing machine learning (ML) algorithms could allow for the prediction of future drought events. In this paper, we have focused on the prediction accuracy of meteorological drought in the semi-arid region based on the standardized precipitation index (SPI) using the random forest (RF), random tree (RT), and Gaussian process regression (GPR-PUK kernel) models. A different combination of machine learning models and variables has been performed for the forecasting of metrological drought based on the SPI-6 and 12 months. Models were developed using monthly rainfall data for the period of 2000-2019 at two meteorological stations, namely, Karanjali and Gangawdi, each representing a geographical region of Upper Godavari river basin area in the central India of Maharashtra state which frequently experiences droughts. Historical data from the SPI from 2000 to 2013 was processed to train the model into machine learning model, and the rest of the 2014 to 2019-year data were used for testing to forecast the SPI and metrological drought. The mean square error (MSE), root mean square error (RMSE), adjusted R2, Mallows' (Cp), Akaike's (AIC), Schwarz's (SBC), and Amemiya's PC were used to identify the best combination input model and best subregression analysis for both stations of SPI-6 and 12. The correlation coefficient ([Formula: see text]), mean absolute error (MAE), root mean square error (RMSE), relative absolute error (RAE), and root relative squared error (RRSE) were used to perform evaluation for SPI-6 and 12 months of both stations with RF, RT, and GPR-PUK kernel models during the training and testing scenarios. The results during testing phase revealed that the RF was found as the best model in forecasting droughts with values of [Formula: see text], MAE, RMSE, RAE (%), and RRSE (%) being 0.856, 0.551, 0.718, 74.778, and 54.019, respectively, for SPI-6 while 0.961, 0.361, 0.538, 34.926, and 28.262, respectively, for SPI-12 scales at Gangawdi station. Further, the respective values of evaluators at Karanjali station were 0.913 and 0.966, 0.541 and 0.386, 0.604 and 0.589, 52.592 and 36.959, and 42.315 and 31.394 for PUK kernel and RT models, respectively, during SPI-6 and SPI-12. Machine learning models are potential drought warning techniques because they take less time, have fewer inputs, and are less sophisticated than dynamic or scientific models.
Asunto(s)
Sequías , Bosques Aleatorios , Ecosistema , India , AlgoritmosRESUMEN
Evaporation is an important hydrological process in the water cycle, especially for water bodies. Machine Learning (ML) models have become accurate and powerful tools in predicting pan evaporation. Meanwhile, the "black-box" character and the consistency with the physical process can decrease the practical implication of ML models. To overcome such limitations, we attempt to develop an interpretable based-ML framework to predict daily pan evaporation using Extra Tree, XGBoost, SVR, and Deep Neural Network (DNN) ML models using hourly climate datasets. To that end, we integrated and employed the Shapely Additive explanations (SHAP), Sobol-based sensitivity analysis, and Local Interpretable Model-agnostic Explanations (LIME) to evaluate the interpretability of the models in predicting daily pan evaporation, at Sidi Mohammed Ben Abdellah (SMBA) weather station, in Morocco. The validation results of the models showed that the developed models are accurate in reproducing the daily pan evaporation with NSE ranging from 0.76 to 0.83 during the validation phase. Furthermore, the interpretability results of the ML models showed that the air temperature (Ta), solar radiation (Rs), followed by relative humidity (H) are the most important climate variables with inflection points of the Ta_median, Ta_mean, Rs_sum, H_mean, and w_std are 17.42 °C, 17.65 °C, 3.8 kw.m-2, 69.59%, and 1.25 m s-1, sequentially. Overall, the interpretability of the models showed a good consistency of the ML models with the real hydro-climatic process of evaporation in a semi-arid environment. Hence, the proposed methodology is powerful in enhancing the reliability and transparency of the developed models for predicting daily pan evaporation. Finally, the proposed approach is new insights to reduce the ''Black-Box'' character of ML models in hydrological studies.
Asunto(s)
Clima , Aprendizaje Automático , Reproducibilidad de los Resultados , Redes Neurales de la Computación , Fenómenos FísicosRESUMEN
Fluoride contamination in water is a key problem facing the world, leading to health problems such as dental and skeletal fluorosis. So, we used low-cost multifunctional tea biochar (TBC) and magnetic tea biochar (MTBC) prepared by facile one-step pyrolysis of waste tea leaves. The TBC and MTBC were characterized by XRD, SEM, FTIR, and VSM. Both TBC and MTBC contain high carbon contents of 63.45 and 63.75%, respectively. The surface area of MTBC (115.65 m2/g) was higher than TBC (81.64 m2/g). The modified biochar MTBC was further used to remediate the fluoride-contaminated water. The fluoride adsorption testing was conducted using the batch method at 298, 308, and 318 K. The maximum fluoride removal efficiency (E%) using MTBC was 98% when the adsorbent dosage was 0.5 g/L and the fluoride concentration was 50 mg/L. The experiment data for fluoride adsorption on MTBC best fit the pseudo 2nd order, rather than the pseudo 1st order. In addition, the intraparticle diffusion model predicts the boundary diffusion. Langmuir, Freundlich, Temkin, and Dubnin-Radushkevich isotherm models were fitted to explain the fluoride adsorption on MTBC. The Langmuir adsorption capacity of MTBC = 18.78 mg/g was recorded at 298 K and decreased as the temperature increased. The MTBC biochar was reused in ten cycles, and the E% was still 85%. The obtained biochar with a large pore size and high removal efficiency may be an effective and low-cost adsorbent for treating fluoride-containing water.
Asunto(s)
Agua Potable , Contaminantes Químicos del Agua , Purificación del Agua , Fluoruros , Cinética , Té , Carbón Orgánico , Adsorción , Fenómenos Magnéticos , Concentración de Iones de HidrógenoRESUMEN
The management of water resources is a priority problem in agriculture, especially in areas with a limited water supply. The determination of crop water requirements and crop coefficient (Kc) of agricultural crops helps to create an appropriate irrigation schedule for the effective management of irrigation water. A portable smart weighing lysimeter (1000 × 1000 mm and 600 mm depth) was developed at CPCT, IARI, New Delhi for real-time measurement of Crop Coefficient (Kc) and water requirement of chrysanthemum crop and bulk data storage. The paper discusses the assembly, structural and operational design of the portable smart weighting lysimeter. The performance characteristics of the developed lysimeter were evaluated under different load conditions. The Kc values of the chrysanthemum crop obtained from the lysimeter installed inside the greenhouse were Kc ini. 0.43 and 0.38, Kc mid-1.27 and 1.25, and Kc end-0.67 and 0.59 for the years 2019-2020 and 2020-2021, respectively, which apprehensively corroborated with the FAO 56 paper for determination of crop coefficient. The Kc values decreased progressively at the late-season stage because of the maturity and aging of the leaves. The lysimeter's edge temperature was somewhat higher, whereas the center temperature closely matched the field temperature. The temperature difference between the center and the edge increased as the ambient temperature rose. The developed smart lysimeter system has unique applications due to its real-time measurement, portable attribute, and ability to produce accurate results for determining crop water use and crop coefficient for greenhouse chrysanthemum crops.
Asunto(s)
Chrysanthemum , Transpiración de Plantas , Riego Agrícola/métodos , Agricultura , Productos Agrícolas , AguaRESUMEN
Dams significantly impact river hydrology by changing the timing, size, and frequency of low and high flows, resulting in a hydrologic regime that differs significantly from the natural flow regime before the impoundment. For precise planning and judicious use of available water resources for agricultural operations and aquatic habitats, it is critical to assess the dam water's temperature accurately. The building of dams, particularly several dams in rivers, can significantly impact downstream water. In this study, we predict the daily water temperature of the Yangtze River at Cuntan. Thus, this work reveals the potential of machine learning models, namely, M5 Pruned (M5P), Random Forest (RF), Random Subspace (RSS), and Reduced Error Pruning Tree (REPTree). The best and effective input variables combinations were determined based on the correlation coefficient. The outputs of the various machine learning algorithm models were compared with recorded daily water temperature data using goodness-of-fit criteria and graphical analysis to arrive at a final comparison. Based on a number of criteria, numerical comparison between the models revealed that M5P model performed superior (R2 = 0.9920, 0.9708; PCC = 0.9960, 0.9853; MAE = 0.2387, 0.4285; RMSE = 0.3449, 0.4285; RAE = 6.2573, 11.5439; RRSE = 8.0288, 13.8282) in pre-impact and post-impact spam, respectively. These findings suggest that a huge wave of dam construction in the previous century altered the hydrologic regimes of large and minor rivers. This study will be helpful for the ecologists and river experts in planning new reservoirs to maintain the flows and minimize the water temperature concerning spillway operation. Finally, our findings revealed that these algorithms could reliably estimate water temperature using a day lag time input in water level. They are cost-effective techniques for forecasting purposes.
Asunto(s)
Hidrología , Ríos , Temperatura , Aprendizaje Automático , AguaRESUMEN
This study examined the physical properties of agricultural drought (i.e., intensity, duration, and severity) in Hungary from 1961 to 2010 based on the Standardized Precipitation Index (SPI) and the Standardized Precipitation Evapotranspiration Index (SPEI). The study analyzed the interaction between drought and crop yield for maize and wheat using standardized yield residual series (SYRS), and the crop-drought resilient factor (CDRF). The results of both SPI and SPEI (-3, -6) showed that the western part of Hungary has significantly more prone to agricultural drought than the eastern part of the country. Drought frequency analysis reveals that the eastern, northern, and central parts of Hungary were the most affected regions. Drought analysis also showed that drought was particularly severe in Hungary during 1970-1973, 1990-1995, 2000-2003, and 2007. The yield of maize was more adversely affected than wheat especially in the western and southern regions of Hungary (1961-2010). In general, maize and wheat yields were severely non-resilient (CDRF < 0.8) in the central and western part of the country. The results suggest that drought events are a threat to the attainment of the second Sustainable Development Goals (SDG-2). Therefore, to ensure food security in Hungary and in other parts of the world, drought resistant crop varieties need to be developed to mitigate the adverse effects of climate change on agricultural production.
Asunto(s)
Sequías , Triticum , Agricultura , Hungría , Zea maysRESUMEN
Sustainable management of natural water resources and food security in the face of changing climate conditions is critical to the livelihood of coastal communities. Increasing inundation and saltwater intrusion (SWI) will likely adversely affect agricultural production and the associated beach access for tourism. This study uses an integrated surface-ground water model to introduce a new approach for retardation of SWI that consists of placing aquifer fill materials along the existing shoreline using Coastal Land Reclamation (CLR). The modeling results suggest that the artificial aquifer materials could be designed to decrease SWI by increasing the infiltration area of coastal precipitation, collecting runoffs from the catchment area, and applying treated wastewater or desalinated brackish water-using coastal wave energy to reduce water treatment costs. The SEAWAT model was applied to verify that it correctly addressed Henry's problem and then applied to the Biscayne aquifer, Florida, USA. In this study, to better inform Coastal Aquifer Management (CAM), we developed four modeling scenarios, namely, Physical Surface Barriers (PSB), including the artificial aquifer widths, permeability, and side slopes and recharge. In the base case scenario without artificial aquifer placement, results show that seawater levels would increase aquifer salinity and displace large amounts of presently available fresh groundwater. More specifically, for the Biscayne aquifer, approximately 0.50% of available fresh groundwater will be lost (that is, 41,192 m3) per km of the width of the aquifer considering the increasing seawater level. Furthermore, the results suggest that placing the PSB aquifer with a smaller permeability of <100 m per day at a width of approximately 615 m increases the available fresh groundwater by approximately 45.20 and 43.90% per km of shoreline, respectively. Similarly, decreasing the slope on the aquifer-ocean side and increasing the aquifer recharge will increase freshwater availability by about 43.90 and 44.50% per km of the aquifer. Finally, placing an aquifer fill along the shallow shoreline increases net revenues to the coastal community through increased agricultural production and possibly tourism that offset fill placement and water treatment costs. This study is useful for integrated management of coastal zones by delaying aquifer salinity, protecting fresh groundwater bodies, increasing agricultural lands, supporting surface water supplies by harvesting rainfall and flash flooding, and desalinating saline water using wave energy. Also, the feasibility of freshwater storage and costs for CAM is achieved in this study.
Asunto(s)
Cambio Climático , Agua Subterránea , Análisis Costo-Beneficio , Salinidad , Agua de MarRESUMEN
The water quality index is one of the prominent general indicators to assess and classify surface water quality, which plays a critical role in river water resources practices. This research constructs a hybrid artificial intelligence model namely sequential minimal optimization-support vector machine (SMO-SVM) along with random forest (RF) as a benchmark model for predicting water quality values at the Wadi Saf-Saf river basin in Algeria. The fifteen input water quality datasets such as biochemical oxygen demand (BOD), oxygen saturation (OS), the potential for hydrogen (pH), chemical oxygen demand (COD), chloride (Cl-), dissolved oxygen (DO), electrical conductivity (EC), total dissolved solids (TDS), nitrate-nitrogen (NO3-N), nitrite-nitrogen (NO2-N), phosphate (PO43-), ammonium (NH4+), temperature (T), turbidity (NTU), and suspended solids (SS) were employed for constructing the predictive models. Different input data combinations are evaluated in terms of predictive performance, using a set of statistical metrics and graphical representation. Results show that less than 40% of samples were observed to be poor quality water during the dry season in downstream northeastern part of the basin. The findings also show that the RF model mostly generates more precise water quality index predictions than the SMO-SVM model for both training and testing stages. Although thirteen input parameters attain the optimal predictive performance (R2 testing = 0.82, RMSE testing = 5.17), a couple of five input parameters, e.g., only pH, EC, TDS, T, and saturation, gives the second optimal predictive precision (R2 test = 0.81, RMSE testing = 5.55). The sensitivity analysis results indicate a greater sensitivity by the all input variables chosen except NO2- of the predictive outcomes to the earlier influencing water quality parameters. Overall, the RF model reveals an improvement on earlier tools for predicting water quality index, according to predictive performance and reducing in the number of input variables.
Asunto(s)
Contaminantes Químicos del Agua , Calidad del Agua , Inteligencia Artificial , Monitoreo del Ambiente/métodos , Nitrógeno/análisis , Dióxido de Nitrógeno/análisis , Oxígeno/análisis , Máquina de Vectores de Soporte , Contaminantes Químicos del Agua/análisisRESUMEN
Accurate prediction of the reference evapotranspiration (ET0) is vital for estimating the crop water requirements precisely. In this study, we developed multi-layer perceptron artificial neural network (MLP-ANN) models considering different combinations of the meteorological data for predicting the ET0 in the Beas-Sutlej basin of Himachal Pradesh (India). Four climatic locations in the basin namely, Kullu, Mandi, Bilaspur, and Chaba were selected. The meteorological dataset comprised air temperature (maximum, minimum and mean), relative humidity, solar radiation, and wind speed, recorded daily for a period of 35 years (1984-2019). The datasets from 1984 to 2012 and 2013 to 2019 were utilized for training and testing the models, respectively. The performance of the developed models was evaluated using several statistical indices. For each location, the best performed MLP-ANN model was the one with the complete combination of the meteorological data. The architecture of the best performing model for Kullu, Mandi, Bilaspur, and Chaba was (6-2-4-1), (6-5-4-1), (6-5-4-1), and (6-4-6-1), respectively. It was observed, however, that the performance of other models was also relatively good, given the limited meteorological data utilized in those models. Further, to appreciate the relative predictive ability of the developed models, a comparison was performed with four existing established empirical models. The approach adopted in this study can be effectively utilized by water users and field researchers for modelling and predicting ET0 in data-scarce locations.
Asunto(s)
Productos Agrícolas/fisiología , Monitoreo del Ambiente , Redes Neurales de la Computación , Transpiración de Plantas , India , Meteorología , Temperatura , VientoRESUMEN
In quantum computing, the variational quantum algorithms (VQAs) are well suited for finding optimal combinations of things in specific applications ranging from chemistry all the way to finance. The training of VQAs with gradient descent optimization algorithm has shown a good convergence. At an early stage, the simulation of variational quantum circuits on noisy intermediate-scale quantum (NISQ) devices suffers from noisy outputs. Just like classical deep learning, it also suffers from vanishing gradient problems. It is a realistic goal to study the topology of loss landscape, to visualize the curvature information and trainability of these circuits in the existence of vanishing gradients. In this paper, we calculate the Hessian and visualize the loss landscape of variational quantum classifiers at different points in parameter space. The curvature information of variational quantum classifiers (VQC) is interpreted and the loss function's convergence is shown. It helps us better understand the behavior of variational quantum circuits to tackle optimization problems efficiently. We investigated the variational quantum classifiers via Hessian on quantum computers, starting with a simple 4-bit parity problem to gain insight into the practical behavior of Hessian, then thoroughly analyzed the behavior of Hessian's eigenvalues on training the variational quantum classifier for the Diabetes dataset. Finally, we show how the adaptive Hessian learning rate can influence the convergence while training the variational circuits.