Metal levels and glomerular filtration rate after unilateral Birmingham Hip Resurfacing.

Aims: The first aim of this study was to evaluate whether preoperative renal function is associated with postoperative changes in whole blood levels of metal ions in patients who have undergone a Birmingham Hip Resurfacing (BHR) arthroplasty with a metal-on-metal bearing. The second aim was to evaluate whether exposure to increased cobalt (Co) and chromium (Cr) levels for ten years adversely affected renal function. Methods: As part of a multicentre, prospective post-approval study, whole blood samples were sent to a single specialized laboratory to determine Co and Cr levels, and the estimated glomerular filtration rate (eGFR). The study included patients with 117 unrevised unilateral BHRs. There were 36 females (31%). The mean age of the patients at the time of surgery of 51.3 years (SD 6.5), and they all had preoperative one-, four-, five-, and ten-year laboratory data. The mean follow-up was 10.1 years (SD 0.2). Results: Median Co levels at one year postoperatively increased significantly compared with the preoperative values, by a factor of 9.7, from 0.13 to 1.26 ppb (p < 0.001), and the median Cr levels increased significantly by a factor of 2.5, from 0.60 to 1.50 ppb (p < 0.001). Lower preoperative eGFRs were associated with significantly larger increases in Co at one year compared with the preoperative levels (ρ = -0.26; p = 0.005), but there was no relationship between preoperative eGFRs and changes in Cr at one year (ρ = -0.13; p = 0.153). Metal levels remained relatively constant with the passage of time, with a median ten-year value of 1.12 ppb for Co and 1.29 ppb for Cr. There was no significant relationship between the Co and Cr levels at ten-year follow-up and the change in eGFR from the preoperative level to that at ten years (ρ = -0.02; p = 0.827 for Co; ρ = -0.008; p = 0.933 for Cr). Conclusion: Although patients with lower preoperative eGFRs tended to have larger increases in Co levels at one year, increased metal levels for patients who underwent unilateral BHR did not adversely affect renal function during the first ten postoperative years.

Timing and Factors Associated With Revision for Infection After Primary Total Knee Arthroplasty Based on American Joint Replacement Registry Data.

BACKGROUND: Infection following total knee arthroplasty (TKA) remains a challenging clinical problem. Using American Joint Replacement Registry data, this study examined factors related to the incidence and timing of infection. METHODS: Primary TKAs performed from January 2012 through December 2018 among patients ≥65 years of age at surgery were queried from the American Joint Replacement Registry and merged with Medicare data to enhance capture of revisions for infection. Multivariate Cox regressions incorporating patient, surgical, and institutional factors were used to produce hazard ratios (HRs) associated with revision for infection and mortality after revision for infection. RESULTS: Among 525,887 TKAs, 2,821 (0.54%) were revised for infection. Men had an increased risk of revision for infection at all-time intervals (≤90 days, HR = 2.06, 95% CI: 1.75-2.43, P < .0001; >90 days to 1 year, HR = 1.90, 95% CI: 1.58-2.28, P < .0001; >1 year, HR = 1.57, 95% CI: 1.37-1.79, P < .0001). TKAs performed for osteoarthritis had an increased risk of revision for infection at ≤90 days (HR = 2.01, 95% CI: 1.45-2.78, P < .0001) but not at later times. Mortality was more likely among patients who had a Charlson Comorbidity Index (CCI) ≥ 5 compared to those who had a CCI ≤ 2 (HR = 3.21, 95% CI: 1.35-7.63, P = .008). Mortality was also more likely among older patients (HR = 1.61 for each decade, 95% CI: 1.04-2.49, P = .03). CONCLUSION: Based on primary TKAs performed in the United States, men were found to have a persistently higher risk of revision for infection, while a diagnosis of osteoarthritis was associated with a significantly higher risk only during the first 90 days after surgery.

Factors Associated With the Incidence and Timing of Total Knee Arthroplasty Infection.

BACKGROUND: Periprosthetic joint infection (PJI) following total knee arthroplasty remains a challenging clinical problem. This study examined variables related to the incidence and timing of PJI. METHODS: We retrospectively reviewed 8462 primary total knee arthroplasties performed at our institution between 2006 and 2018 for PJI. The mean follow-up is 3.7 years. Eighty-seven variables including patient-reported diagnoses, demographics, and medications were collected. Time to infection, bacterial organism, success of infection treatment, and variables associated with infection are reported. RESULTS: PJI occurred in 105 (1.24%) cases. The incidence of infection in the first year was 0.72% and represented 58% of all infections. Multivariate Cox regression revealed males (hazard ratio [HR] = 2.85, 95% confidence interval [CI], 1.69-4.79) and patients with major depression or anxiety (HR = 2.11, 95% CI, 1.21-3.67) were more likely to develop an infection in the first year. After the first year, patients with a history of cellulitis (HR = 3.97, 95% CI, 1.91-8.27) and those taking antiepileptic medications (HR = 3.61, 95% CI, 1.73-7.52) were more likely to develop an infection. Culture-negative infections were more common after one year than before (23% vs 8%, P = .04). Debridement, antibiotics, and implant retention was used in 79% (48/61) of infections in the first year and 55% (24/44) after one year with success rates of 51% and 70%, respectively (P = .16). CONCLUSION: The majority of infections occur during the first year after surgery. Importantly, patient variables associated with infection are different among infections that occur before and after one year. A multicenter study with a much larger number of infections may allow analysis of more time intervals after surgery.

A Postmortem Analysis of Polyethylene Damage and Periprosthetic Tissue in Rotating Platform and Fixed Bearing Tibial Inserts.

BACKGROUND: Mobile bearing designs are intended to reduce wear, but mixed results were reported from retrieval analyses. Postmortem evaluation (PM) provides the opportunity to assess polyethylene damage in successful implants. We compared damage patterns, MRI presentation, and histology between mobile-bearing and fixed tibial inserts retrieved postmortem and compared these results to our prior findings from implants retrieved at revision. METHODS: Eleven postmortem knees with rotating platform (RP) implants and 13 with fixed bearing (FB) implants were examined. All were MRI scanned, and tissue samples were collected from standardized regions for histology. Polyethylene inserts were subjectively scored to assess articular, backside, and PS post surfaces for damage modes and severity. RESULTS: Average duration of implantation was 9.3 years (1.7-19.6 years). Surface burnishing was the most common polyethylene damage mode. Average damage scores were higher for RP (53.4) compared to FB inserts (34.4) due to greater backside damage (13.4 for RP vs 1.4 for FB). A minimal difference in damage was observed on the articular surfaces (37.4 RP vs 30.0 FB). Mild innate macrophage reactions were seen in 8 (72.7%) RP and 5 (45.5%) FB specimens. Polyethylene particles were identified in 7 (63.6%) RP and 3 (27.7%) FB specimens. CONCLUSIONS: Postmortem inserts showed low damage levels and mild tissue reactions compared to those reported for implants removed at revision arthroplasty. Nonetheless, trends in comparing RP and FB inserts were consistent with those seen in retrieval analyses, demonstrating the usefulness of retrieval studies in capturing performance differences among TKA designs.

A comparison of metal/metal and ceramic/metal taper-trunnion modular connections in explanted total hip replacements.

Corrosion and wear are commonly found at the taper-trunnion connection of modular total hip arthroplasty (THA) explanted devices. While metal/metal (M/M) modular taper-trunnion connections exhibit more wear/corrosion than ceramic/metal (C/M) modular taper-trunnion connections, damage is present in both, regardless of material. This study used a combination of assessment techniques including clinical data, visual scoring assessment, optical imaging, profilometry, and x-ray photoelectron microscopy (XPS), to investigate wear mechanisms and damage features at the modular taper-trunnion connection of 10 M/M and 8 C/M explanted THAs. No correlation was found between any demographic variable and corrosion wear and assessment scores. All assessment techniques demonstrated that the stem trunnions had more damage than head tapers for both explant groups and agreed that C/M explants had less corrosion and wear compared to M/M explants. However, visual assessment scores differed between assessment techniques when evaluating the tapers and trunnions within the two groups. Profilometry showed an increase (p <.05) in surface roughness for stem trunnions compared to head tapers for both explant groups. X-ray photoelectron spectroscopy performed on deposits from two M/M explants found chromium and molybdenum carbides beneath the surface while chromium sulfate and aged bone mineral were found on the surface suggesting that the debris is a result of corrosion rather than wear. These results indicate that taper-trunnion damage is more prevalent for M/M explants, but C/M explants are still susceptible to damage. More comprehensive analysis of damage is necessary to better understand the origins of taper-trunnion damage.

Do total hip arthroplasty polyethylene liners without free radicals oxidize in vivo or ex vivo?

Crosslinking substantially reduces the wear of ultra-high molecular weight polyethylene (UHMWPE) used in total hip arthroplasty (THA) but some reports have indicated that first generation liners manufactured without antioxidants may be vulnerable to in vivo oxidation. This study evaluated maximum oxidation using Fourier transform infrared spectroscopy per ASTM F2102-06ε1 and linear head penetration using a coordinate measuring machine among 66 revision-retrieved THA components with in vivo durations ranging from 0.02 to 24.6 years. These included 30 liners crosslinked with 5 Mrad of gamma radiation and then melted, 13 non-crosslinked, never-irradiated liners sterilized with gas plasma and 23 non-crosslinked, never-irradiated liners sterilized with ethylene oxide. All liners were vacuum-sealed and stored at -20°C prior to analysis with the exception of three retrievals of each material type that were stored in air for 9.9 to 21.5 years. All 57 vacuum-sealed and frozen retrievals demonstrated good oxidative stability with maximum oxidation indices (OIs) less than 1.0 and 75% (43/57) of these liners had maximum OIs less than 0.1. Linear penetration measurements were lower in the crosslinked liners compared to non-crosslinked retrievals. Although instances of oxidation and embrittlement were found after ex vivo storage in air among liners that did not have free radicals at the time of implantation, in vivo oxidation does not appear to be a clinical concern through the first decade of service for crosslinked liners and at up to 25 years after surgery for non-crosslinked liners.

Have newer bearing surfaces changed expectations regarding the longevity of total hip arthroplasty?

AIMS: The purpose of this study is to examine six types of bearing surfaces implanted at a single institution over three decades to determine whether the reasons for revision vary among the groups and how long it takes to identify differences in survival. METHODS: We considered six cohorts that included a total of 1,707 primary hips done between 1982 and 2010. These included 223 conventional polyethylene sterilized with γ irradiation in air (CPE-GA), 114 conventional polyethylene sterilized with gas plasma (CPE-GP), 116 crosslinked polyethylene (XLPE), 1,083 metal-on-metal (MOM), 90 ceramic-on-ceramic (COC), and 81 surface arthroplasties (SAs). With the exception of the COC, all other groups used cobalt-chromium (CoCr) femoral heads. The mean follow-up was 10 (0.008 to 35) years. Descriptive statistics with revisions per 100 component years (re/100 yr) and survival analysis with revision for any reason as the endpoint were used to compare bearing surfaces. RESULTS: XLPE liners demonstrated a lower cumulative incidence of revision at 15 years compared to the CPE-GA and CPE-GP groups owing to the absence of wear-related revisions (4% for XLPE vs 18%, p = 0.02, and 15%, p = 0.003, respectively). Revisions for adverse local tissue reactions occurred exclusively among the MOM (0.8 re/100 year) and SA groups (0.1 re/100 year). The revision rate for instability was lower among hips with 36 mm and larger head sizes compared to smaller head sizes (0.2% vs 2%, p < 0.001). CONCLUSION: The introduction of XLPE has eliminated wear-related revisions through 15-year follow-up compared to CPE-GP and CPE-GA. Dislocation incidence has been reduced with the introduction of larger diameter heads but remains a persistent concern. The potential for adverse local tissue reactions with MOM requires continued follow-up. Cite this article: Bone Joint J 2020;102-B(7 Supple B):105-111.

Bundled Payments for Care Improvement: Health System Experience With Lower Extremity Joint Replacement at Higher and Lower Volume Hospitals.

BACKGROUND: The Bundled Payments for Care Improvement (BPCI) initiative was introduced in 2013 to reduce Medicare healthcare costs while preserving or enhancing quality. We examined data from a metropolitan healthcare system comprised of 1 higher volume hospital and 4 lower volume hospitals that voluntarily elected to participate in the BPCI Major Joint Replacement of the Lower Extremity Model 2, beginning July 1, 2015. Stratifying the data by hospital volume, we determined how costs changed during the 16-month period when all 5 hospitals participated compared to the 1-year period preceding BPCI participation, where savings were achieved, and how the hospitals were rewarded. METHODS: The Medicare data included the 90-day target for each episode and actual part A and part B spending for the anchor hospitalization plus all post-acute payments including inpatient rehabilitation, skilled nursing, home health, outpatient physical therapy, and hospital readmissions. RESULTS: The mean episode of care cost decreased by 11.1% (from $21,324 to $18,953) at the higher volume hospitals and by 8.3% (from $25,724 to $23,584) at the lower volume hospitals during BPCI participation compared to the preceding year. The savings were achieved by reducing the use of inpatient rehabilitation, shortening the length of stay at skilled nursing facilities, and decreasing readmission rates. Although the higher volume hospital achieved an increased mean savings of $230 per episode compared to the lower volume hospitals ($2371 vs $2141), it was penalized $490 per episode after reconciling the actual Medicare expenditures with the BPCI targets while the lower volume hospitals received a mean reward of $315 per episode. CONCLUSION: The BPCI initiative decreased costs and readmissions within our healthcare system. Despite substantial savings compared to the preceding year, the higher volume hospital's low target derived from its 2009-2012 baseline costs was not achieved which resulted in a penalty and led it to withdraw from the BPCI initiative in October 2016.

Do Well-functioning THAs Retrieved at Autopsy Exhibit Evidence of Fretting and Corrosion?

BACKGROUND: Our understanding of fretting and corrosion at head-neck junctions in modular THAs in vivo is based largely on the analysis of retrieved implants removed for various diagnoses. Little is known about the condition of head-neck tapers in well-functioning THAs. QUESTIONS/PURPOSES: Regarding a cohort of well-functioning autopsy-retrieved modular THAs, we asked: (1) Does trunnion geometry or femoral head material affect the pull-off force of the femoral head? (2) Is there a relationship between trunnion damage and length of implantation time, head diameter, and neck length? (3) Does visual damage scoring accurately determine the presence or absence of corrosion on cobalt-chrome trunnions? METHODS: Sixty-six femoral stems and engaged femoral heads were retrieved at autopsy from 53 patients at Anderson Orthopaedic Research Institute from 1998 to 2014. Ten stems were excluded for low stem design group size or insufficient head-stem clearance for pull-off testing, leaving a cohort of 56 THAs with a median implantation time of 10 years (range, 1-24 years). The femoral stems included three cobalt-chrome (CoCr) designs from a single manufacturer with either a 12/14 or 14/16 trunnion design (N = 36 and 20, respectively) mated with alumina or CoCr heads (N = 13 and 43, respectively). The force required to pull off the femoral heads was measured using a uniaxial load frame according to ASTM F2009-00. Mating surfaces were visually examined to assess the presence and severity of fretting and corrosion using a modified Goldberg scoring system. Three 12/14 trunnions of similar implantation lengths and varied damage scores were selected for imaging with a scanning electron microscope (SEM) and energy dispersive x-ray analysis (EDAX) to confirm the absence or presence of corrosion damage. RESULTS: No difference was seen in pull-off force between groups based on trunnion geometry and head material (median [range], alumina-12/14: 3127 [2320-6992] N, alumina-14/16: 2670 [1095-7919] N, CoCr-12/14: 2255 [1332-5939] N, CoCr-14/16: 2812 [1655-4246] N; p = 0.132). A positive correlation was found between damage score and length of implantation (ρ = 0.543, p < 0.001). However, no correlation between damage score and either head diameter or neck length was found (ρ = -0.012, p = 0.930 and ρ < 0.001, p = 0.995, respectively). In all, 39 of 56 specimens demonstrated no fretting or corrosion, and 16 specimens had mild damage scores. One specimen demonstrated severe corrosion without visual evidence of fretting. The presence of intergranular corrosion on this trunnion was determined by SEM imaging and EDAX. The absence of corrosion products on two trunnions with no observed damage was confirmed. CONCLUSIONS: This study found little evidence of fretting and corrosion in a cohort of well-functioning CoCr-CoCr and alumina-CoCr head-neck couples. Further studies are necessary to characterize fretting and corrosion at head-neck junctions of well-functioning implants of other designs and manufacturers. CLINICAL RELEVANCE: The results from this study suggest that patients with well-functioning THAs using polyethylene bearing surfaces with alumina or CoCr heads appear to be at low risk for trunnion corrosion for the specific CoCr alloy stems and trunnion geometries analyzed here.

Long-term bone remodelling around 'legendary' cementless femoral stems.

Bone remodelling around a stem is an unavoidable long-term physiological process highly related to implant design. For some predisposed patients, it can lead to periprosthetic bone loss secondary to severe stress-shielding, which is thought to be detrimental by contributing to late loosening, late periprosthetic fracture, and thus rendering revision surgery more complicated.However, these concerns remain theoretical, since late loosening has yet to be documented among bone ingrowth cementless stems demonstrating periprosthetic bone loss associated with stress-shielding.Because none of the stems replicate the physiological load pattern on the proximal femur, each stem design is associated with a specific load pattern leading to specific adaptive periprosthetic bone remodelling. In their daily practice, orthopaedic surgeons need to differentiate physiological long-term bone remodelling patterns from pathological conditions such as loosening, sepsis or osteolysis.To aid in that process, we decided to clarify the behaviour of the five most used femoral stems. In order to provide translational knowledge, we decided to gather the designers' and experts' knowledge and experience related to the design rationale and the long-term bone remodelling of the following femoral stems we deemed 'legendary' and still commonly used: Corail (Depuy); Taperloc (Biomet); AML (Depuy); Alloclassic (Zimmer); and CLS-Spotorno (Zimmer). Cite this article: EFORT Open Rev 2018;3:45-57. DOI: 10.1302/2058-5241.3.170024.

Otto Aufranc Award: Crosslinking Reduces THA Wear, Osteolysis, and Revision Rates at 15-year Followup Compared With Noncrosslinked Polyethylene.

BACKGROUND: Crosslinked polyethylene (XLPE) liners used for primary THA have demonstrated lower wear rates than noncrosslinked, conventional polyethylene (CPE) liners through the first decade of clinical service. However, little high-quality evidence is currently available regarding the second decade performance of these implants and it remains uncertain whether the onset of osteolysis has simply been delayed or if the wear associated with XLPE liners will remain low enough that osteolysis will not occur. It is also unknown how the potential reductions in wear and osteolysis will influence long-term revision rates. QUESTIONS/PURPOSES: Do patients who underwent THA with XLPE liners demonstrate (1) a lower rate of revision for wear-related complications; (2) a reduced wear rate; and (3) a lower frequency of osteolysis compared with those with CPE liners? METHODS: Over an 18-month period from 1999 to 2000, 226 patients who had 236 primary THAs consented to participate in a randomized controlled trial conducted at one institution. To be eligible for intraoperative randomization, patients had to be implanted with a 28-mm cobalt-chrome alloy femoral head, a 4-mm lateralized liner, and the same cup and stem design. Six patients with six THAs were excluded intraoperatively because they did not receive study components for reasons unrelated to the liner material. The remaining 230 THAs among 220 patients were randomized to XLPE liners or CPE liners. The mean age at surgery was 62 ± 11 years and there were no differences in age, gender, or body mass index among the groups. There was no differential loss to followup between the study groups; among patients not known to be deceased or having undergone revision, minimum 14-year radiographic followup is available for 85 THAs including 46 with XLPE and 39 with CPE liners. Polyethylene wear was measured radiographically using Martell's Hip Analysis Suite and areas of osteolysis were evaluated before revision or at most recent followup. Revision rates at 15 years using reoperation for any reason and revision for wear or osteolysis were calculated using cumulative incidence considering patient death as a competing risk. RESULTS: The cumulative incidence of revision at 15 years using reoperation for wear-related complications as an endpoint was lower in the XLPE group than the CPE group (0%, 95% confidence interval [CI], 0%-0% versus 12%, 95% CI, 7%-19%; p < 0.001). Among unrevised THAs with minimum 14-year radiographic followup, the mean steady-state linear wear rate for THAs with XLPE liners was lower than the mean linear wear rate for the THAs with CPE liners (0.03 ± 0.05 versus 0.17 ± 0.09 mm/year; mean difference, 0.14; 95% CI, 0.11-0.17; p < 0.001). Osteolysis of any size was noted among 9% (four of 46) of the hips in the XLPE group and 46% (18 of 39) of the hips in the CPE group (odds ratio, 0.19; 95% CI, 0.07-0.51; p < 0.001). CONCLUSIONS: This randomized study with followup into the second decade demonstrated reductions in revision, wear, and osteolysis associated with the use of XLPE. The low wear rates and absence of any mechanical failures among the XLPE liners at long-term followup affirm the durability of these components that did not incorporate antioxidants. Although osteolysis has not been eliminated, it occurs infrequently and has not caused any clinical problems to date. LEVEL OF EVIDENCE: Level I, therapeutic study.

The surgical options and clinical evidence for treatment of wear or corrosion occurring with THA or TKA.

BACKGROUND: Wear and corrosion occurring in patients with hip and knee arthroplasty are common causes of failure leading to revision surgery. A variety of surgical approaches to these problems have been described, with varying efficacy. Polyethylene wear, metal-on-metal (MoM) hip bearing wear, and problems associated with modular taper corrosion are the areas of greatest clinical impact; results of revisions for these problems are likely to dictate a large portion of revision resources for the foreseeable future, and so they call for specific study. QUESTIONS/PURPOSES: We identified the most frequently reported procedures to treat hip polyethylene wear, knee polyethylene wear, MoM wear after THA, and modular taper corrosion and determined the timing and reasons these failed. METHODS: We performed systematic reviews of the published literature on the four topics using MEDLINE(®) and Embase in October 2013; searches were supplemented by hand searches of bibliographies. Prespecified criteria resulted in the identification of 38 relevant articles, of which 33 were either case reports or Level IV evidence. Followup was generally at short term and ranged from 0.2 to 8 years. RESULTS: The most frequently reported procedures for treating clinically important wear were a partial or complete revision. When treating polyethylene wear, the more frequently reported reasons for hip and knee rerevisions were loosening, continued wear, and instability. Soft tissue reactions were more common and occasionally extensive in patients with MoM or modular taper corrosion. Patients with soft tissue reactions had more complications and higher rerevision rates. CONCLUSIONS: Studies with longer followup and higher levels of evidence are needed to direct the treatment of wear and corrosion. When soft tissue damage secondary to MoM wear or taper corrosion is present, the results of treatment can be poor. There is an urgent need to better understand these two mechanisms of failure.

Do you have to remove a corroded femoral stem?

Corrosion at the head-neck taper has been recently identified as a cause of adverse local tissue reaction. There are no guidelines concerning removal of fixed femoral components when corrosion is present. The objective of this study is to report the survivorship when a new metal ball is placed on a corroded stem. We examined 86 retrieved femoral heads from metal-on-polyethylene THAs that underwent head and liner exchanges after a minimum 10 years in-vivo and evaluated the subsequent survivorship. There were 7 re-revisions (8.1%) but none were for corrosion-related diagnoses and there was no difference in the survivorship between the 32 THAs with high-grade head taper corrosion and the 54 THAs with low-grade corrosion. We do not currently recommend removing well-fixed femoral stems with corrosion.

Radiographically measured total knee wear is constant and predicts failure.

Knee wear is commonly measured with the most recent radiograph based on the assumption that wear progresses at a constant rate. Changing patient activity or in vivo polyethylene deterioration are examples of factors that could cause wear rates to change over time. Using six or more radiographs on each of 251 knees over a mean 10-year follow-up, we determined the pattern of polyethylene wear. 92% of knees had linear wear with a mean wear rate of 0.09 ± 0.12 mm/yr. Ten knees (4%) had late accelerated wear. Knees with accelerated wear and those with a wear rate of 0.15 mm/yr or greater had lower survivorship rates. We conclude that wear is linear with rare exceptions and that higher wear is correlated with failure.

Can microcomputed tomography measure retrieved polyethylene wear? Comparing fixed-bearing and rotating-platform knees.

BACKGROUND: Wear of total knee polyethylene has been quantified gravimetrically with thickness measurements and evaluation of surface wear modes. However, these techniques do not localize volumetric wear. QUESTIONS/PURPOSES: We used micro-CT scans of retrieved total knee liners and unworn, new liners to determine the volume and location of wear. METHODS: We retrieved 12 fixed and 12 rotating-platform bearings after a mean 52 months of use. Inserts were weighed and thickness was measured. Micro-CT scans of retrieved and matched new liners were superimposed to compare the location and magnitude of wear. RESULTS: The average total wear was 254 ± 248 mm(3). The average wear rate was 58 ± 41 mm(3)/year. Wear was 69% of penetration, demonstrating the contribution of deformation to knee wear. Rotating-platform wear rate was 43 ± 25 mm(3)/year and the fixed-bearing rate was 74 ± 49 mm(3)/year. Five percent of the rotating-platform wear rate came from the backside compared with 14% of the fixed-bearing wear rate. CONCLUSIONS: Micro-CT can determine the volume and location of wear of retrieved tibial liners. Because the magnitude of the manufacturing tolerances was approximately half the magnitude of the total wear on average, accounting for the potential influence of tolerances is important to accurately measure volumetric wear if the unworn (preimplantation) geometry of the insert is unknown. Without accounting for tolerances, this technique may not be applicable for retrievals with a short followup that have low wear. However, application of micro-CT could be of value in determining the exact location of wear in knee simulator studies in which the same insert is measured repeatedly and manufacturing tolerances are not a concern.

A prospective, randomized study of cross-linked and non-cross-linked polyethylene for total hip arthroplasty at 10-year follow-up.

In 1999, our institution initiated a prospective study to compare the outcome of total hip arthroplasty patients randomized to either non-cross-linked liners or polyethylene liners that were cross-linked with 5.0 Mrad of gamma-irradiation and heat treated to eliminate free radicals. Among 230 randomized THAs, 13 have had reoperations, and 31 patients with 32 THAs died with less than 9-year follow-up. Follow-up for the remaining 185 THAs averaged 10.0 ± 1.8 years. There have been 9 wear-related liner exchanges among the non-cross-linked group and none among the cross-linked group. Using revision for wear-related complications as an endpoint, survivorship at 10-years was 94.7 ± 4.6% for non-cross-linked and 100% for cross-linked (P = .003). Among unrevised hips, the mean linear wear rate was 0.22 mm/yr for non-cross-linked and 0.04 mm/yr for cross-linked (P < .001). The incidence of clinically important osteolysis with an area of at least 1.5 square centimeters among unrevised hips was 22% for non-cross-linked and 0% for cross-linked (P < .001).

Metal-on-metal local tissue reaction is associated with corrosion of the head taper junction.

We evaluated taper corrosion in 36-mm diameter metal-on-metal (MOM) and metal-on-polyethylene (MOP) femoral heads from a single manufacturer retrieved for various reasons. Three reviewers visually graded taper corrosion with a 5-point scale on 19 MOM heads and 14 MOP heads. The MOM group had a higher corrosion score than the MOP group (mean, 3.5 vs 1.9; P < .001). There were 8 MOM heads (42%) and only 1 MOP head (7%) that demonstrated corrosion outside of the taper zone. Metal-on-metal patients revised secondary to adverse local tissue reactions (ALTRs) had greater scores than patients without ALTRs (mean, 4.36 vs 2.38; P < .01). Adverse local tissue reactions MOM patients were also likely to have corrosion outside of the taper junction. The corrosion score increased with implantation time, and at all time intervals, the corrosion score for the MOM group was greater. Because corrosion worsens with time, we are concerned that MOM ALTR failures will increase with longer follow-up.

The effect of poly sterilization on wear, osteolysis and survivorship of a press-fit cup at 10-year followup.

BACKGROUND: During the mid-1990s when our institution was using a press-fit porous-coated cup without supplemental initial fixation for primary THA, the manufacturer transitioned from gamma irradiation to gas plasma for the terminal sterilization of their polyethylene liners. QUESTIONS/PURPOSES: At minimum 10-year followup, we asked whether the fixation achieved by solely relying on a press-fit would be durable and how different liner sterilization methods affected radiographic wear, osteolysis, and survivorship. PATIENTS AND METHODS: We retrospectively reviewed 373 patients who underwent 398 primary THAs with a press-fit porous-coated cup between March 1995 and December 1996. Mean age at time of surgery was 61.5 ± 13.3 years and mean followup was 10.4 ± 3.7 years. We determined reasons for revision, survivorship, femoral head penetration, osteolysis, and wear-related complications. RESULTS: Among 20 revisions involving any component, seven were associated with wear and osteolysis. Kaplan-Meier survivorship, using component revision for any reason as an end point, was 95.7% (95% confidence interval, 93.6%-97.9%) at 10 years. Noncrosslinked liners sterilized with gas plasma demonstrated a mean head penetration rate of 0.20 ± 0.09 mm/year compared with 0.13 ± 0.07 mm/year for liners sterilized with gamma irradiation in air and 0.09 ± 0.04 mm/year for liners sterilized with gamma-irradiation with barrier packaging without oxygen. THAs with increased volumetric wear tended to demonstrate larger osteolytic lesions (r = 0.40) and there tended to be less osteolysis among the liners sterilized with gamma-irradiation with barrier packaging without oxygen. However, there was no difference in survivorship among the sterilization groups and there has been no cup or stem loosening associated with osteolysis. CONCLUSIONS: Durable biologic fixation through 10-year followup can be achieved by solely relying on an initial press-fit. Noncrosslinking gas plasma for terminal sterilization of the polyethylene liners was associated with greater head penetration rate than gamma irradiation. LEVEL OF EVIDENCE: Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Osteolysis propensity among bilateral total hip arthroplasty patients.

Because some patients with high wear rates demonstrate extensive osteolysis whereas other patients with similarly high wear rates show little or no evidence of osteolysis, we hypothesized that both polyethylene wear and a patient-specific propensity mediate the development of osteolysis. We evaluated wear and osteolysis using computed tomography and radiographs among 46 patients who had undergone bilateral total hip arthroplasties (THAs). A radiographic patient-specific propensity for osteolysis associated with each THA was quantified by dividing the amount of osteolysis by the volumetric wear. Using a multivariate regression analysis to simultaneously consider the influence of polyethylene wear and patient propensity, we found that both factors are associated with the amount of osteolysis around a THA and that they appear to be of similar importance.

Survivorship of polyethylene liner exchanges performed for the treatment of wear and osteolysis among porous-coated cups.

For the past 17 years, we have favored treating patients with polyethylene wear and osteolysis by performing a liner exchange with retention of the old shell when possible. Using our institutional database, we identified 187 acetabular revisions in which we had retained the old shell. Among this group, we found 25 rerevisions. These included 10 for hip instability, 9 for cup loosening, 3 for recurrence of excessive wear or osteolysis, 2 for infection, and 1 for dissociation of the replaced liner. The need for rerevision varied with the different retained shell designs. We rerevised 17% of the total hip arthroplasties with old spiked shells, 21% with Arthropor shells, 13% with Triloc shells and 5% with Duraloc shells. Before making a decision to retain or remove a well-fixed old acetabular shell, we recommend consideration of the design's past track record and careful inspection of the condition of the existing shell.