RESUMEN
STUDY DESIGN: Experimental porcine anterior cervical discectomy and fusion (ACDF) model: a proof-of-concept study. OBJECTIVE: The effect of monetite synthetic bone graft (SBG) containing calcium pyrophosphate and ß-tricalcium phosphate on cervical spinal fusion in a noninstrumented two-level large animal model. SUMMARY OF BACKGROUND DATA: ACDF is the gold standard surgical technique for the treatment of degenerative cervical spinal diseases. However, pseudarthrosis associated with increased patient morbidity occurs in â¼2.6% of the surgeries. SBG may enhance bony fusion and subsequently decrease the risk of pseudarthrosis. Recent studies on monetite-based SBGs for use in large cranial defects in humans have shown promising bone healing results, necessitating further investigation of their use in cervical spinal fusion. MATERIALS AND METHODS: Four adult female Danish Göttingen minipigs received partial cervical anterior discectomy and intervertebral defects at an upper and lower level. One defect was filled with SBG, and the other was left empty. Bony fusion was evaluated using computed tomography (CT) at three-month intervals for 12 months. Fifteen months postsurgery, the animals were euthanized for further ex vivo qualitative histopathologic and micro-CT evaluations. Fusion rates were compared using the Fisher exact test at each time point. RESULTS: Increased interbody bony fusion rates were observed at SBG levels (4/4) compared with control levels (0/4) evaluated by CT at 6 and 9 months postsurgery ( P =0.029). Fusion was observed at all SBG levels 12 months postsurgery and at only one control level. Histopathologic evaluation confirmed high-quality interbody bony fusion at all SBG levels and fusion by spondylosis at one control level. CONCLUSION: This proof-of-concept study provides preliminary evidence of a novel, calcium pyrophosphate-containing, and ß-tricalcium phosphate-containing monetite SBG that promotes bony fusion compared with a negative control in a clinically relevant porcine model of ACDF.
Asunto(s)
Fosfatos de Calcio , Vértebras Cervicales , Discectomía , Fusión Vertebral , Porcinos Enanos , Animales , Fusión Vertebral/métodos , Discectomía/métodos , Porcinos , Fosfatos de Calcio/uso terapéutico , Vértebras Cervicales/cirugía , Vértebras Cervicales/diagnóstico por imagen , Femenino , Trasplante Óseo/métodos , Modelos Animales de EnfermedadRESUMEN
In this proof-of-concept, bone neoformation beyond the skeletal envelope is explored by using a collagen pouch (n= 6) packed with calcium phosphate (CaP) granules placed over the frontal bone in sheep (n= 3). At 13 weeks, macroscopic examination showed specimens covered by an adherent fibrinous envelope with slight vascularization. Histology revealed colonization of the implant by newly formed woven bone and fibrous connective tissue. Surface osteoblasts as well as material-filled macrophages, lymphocytes, polymorphonuclear cells and giant cells were also found in large quantities surrounding the newly formed bone tissue inside the collagen pouch. On the side facing the recipient bone, the collagen membrane had to a large extent been resorbed and bridging bone formation was clearly visible between the test article and recipient bone. On the other side facing soft tissue, the collagen pouch remained intact with a visible fibrous capsule. This study demonstrated that the use of a collagen sleeve as a container for CaP granules allows for good neoformation beyond the skeletal envelope with bridging bone formation clearly visible between the test article and recipient bone. Additionally, in this model, macrophages rather than osteoclasts appear to modulate CaP granule resorption and remodeling into new bone. This construct opens new perspectives for treatment methods that could be used for bone augmentation and restoration of cranio-maxillofacial defects and malformations.
Asunto(s)
Sustitutos de Huesos , Osteogénesis , Animales , Ovinos , Proyectos Piloto , Colágeno , Fosfatos de CalcioRESUMEN
Calcium phosphates (CaP) represent an important class of osteoconductive and osteoinductive biomaterials. As proof-of-concept, we show how a multi-component CaP formulation (monetite, beta-tricalcium phosphate, and calcium pyrophosphate) guides osteogenesis beyond the physiological envelope. In a sheep model, hollow dome-shaped constructs were placed directly over the occipital bone. At 12 months, large amounts of bone (â¼75%) occupy the hollow space with strong evidence of ongoing remodelling. Features of both compact bone (osteonal/osteon-like arrangements) and spongy bone (trabeculae separated by marrow cavities) reveal insights into function/need-driven microstructural adaptation. Pores within the CaP also contain both woven bone and vascularised lamellar bone. Osteoclasts actively contribute to CaP degradation/removal. Of the constituent phases, only calcium pyrophosphate persists within osseous (cutting cones) and non-osseous (macrophages) sites. From a translational perspective, this multi-component CaP opens up exciting new avenues for osteotomy-free and minimally-invasive repair of large bone defects and augmentation of the dental alveolar ridge.
RESUMEN
Interactions between biomolecules and structurally disordered calcium phosphate (CaP) surfaces are crucial for the regulation of bone mineralization by noncollagenous proteins, the organization of complexes of casein and amorphous calcium phosphate (ACP) in milk, as well as for structure-function relationships of hybrid organic/inorganic interfaces in biomaterials. By a combination of advanced solid-state NMR experiments and metadynamics simulations, we examine the detailed binding of O-phospho-l-serine (Pser) and l-serine (Ser) with ACP in bone-adhesive CaP cements, whose capacity of gluing fractured bone together stems from the close integration of the organic molecules with ACP over a subnanometer scale. The proximity of each carboxy, aliphatic, and amino group of Pser/Ser to the Ca2+ and phosphate species of ACP observed from the metadynamics-derived models agreed well with results from heteronuclear solid-state NMR experiments that are sensitive to the 13C-31P and 15N-31P distances. The inorganic/organic contacts in Pser-doped cements are also contrasted with experimental and modeled data on the Pser binding at nanocrystalline HA particles grown from a Pser-bearing aqueous solution. The molecular adsorption is driven mainly by electrostatic interactions between the negatively charged carboxy/phosphate groups and Ca2+ cations of ACP, along with H bonds to either protonated or nonprotonated inorganic phosphate groups. The Pser and Ser molecules anchor at their phosphate/amino and carboxy/amino moieties, respectively, leading to an extended molecular conformation across the surface, as opposed to an "upright standing" molecule that would result from the binding of one sole functional group.
RESUMEN
Silicon nitride (Si3N4) is a promising biomaterial, currently used in spinal fusion implants. Such implants should result in high vertebral union rates without major complications. However, pseudarthrosis remains an important complication that could lead to a need for implant replacement. Making silicon nitride implants more bioactive could lead to higher fusion rates, and reduce the incidence of pseudarthrosis. In this study, it was hypothesized that creating a highly negatively charged Si3N4 surface would enhance its bioactivity without affecting the antibacterial nature of the material. To this end, samples were thermally, chemically, and thermochemically treated. Apatite formation was examined for a 21-day immersion period as an in-vitro estimate of bioactivity. Staphylococcus aureus bacteria were inoculated on the surface of the samples, and their viability was investigated. It was found that the thermochemically and chemically treated samples exhibited enhanced bioactivity, as demonstrated by the increased spontaneous formation of apatite on their surface. All modified samples showed a reduction in the bacterial population; however, no statistically significant differences were noticed between groups. This study successfully demonstrated a simple method to improve the in vitro bioactivity of Si3N4 implants while maintaining the bacteriostatic properties.
RESUMEN
One major challenge when developing new biomaterials is translating in vitro testing to in vivo models. We have recently shown that a single formulation of a bone tissue adhesive, phosphoserine modified cement (PMC), is safe and resorbable in vivo. Herein, we screened many new adhesive formulations, for cytocompatibility and bioactive ion release, with three cell lines: MDPC23 odontoblasts, MC3T3 preosteoblasts, and L929 fibroblasts. Most formulations were cytocompatible by indirect contact testing (ISO 10993-12). Formulations with larger amounts of phosphoserine (>50%) had delayed setting times, greater ion release, and cytotoxicity in vitro. The trends in ion release from the adhesive that were cured for 24 h (standard for in vitro) were similar to release from the adhesives cured only for 5−10 min (standard for in vivo), suggesting that we may be able to predict the material behavior in vivo, using in vitro methods. Adhesives containing calcium phosphate and silicate were both cytocompatible for seven days in direct contact with cell monolayers, and ion release increased the alkaline phosphatase (ALP) activity in odontoblasts, but not pre-osteoblasts. This is the first study evaluating how PMC formulation affects osteogenic cell differentiation (ALP), cytocompatibility, and ion release, using in situ curing conditions similar to conditions in vivo.
RESUMEN
INTRODUCTION: The fixation of small intraarticular bone fragments is clinically challenging and an obvious first orthopaedic indication for an effective bone adhesive. In the present study the feasibility of bonding freshly harvested human trabecular bone with OsSticR, a novel phosphoserine modified cement, was evaluated using a bone cylinder model pull-out test and compared with a commercial fibrin tissue adhesive. METHODS: Femoral heads (n=13) were collected from hip fracture patients undergoing arthroplasty and stored refrigerated overnight in saline medium prior to testing. Cylindrical bone cores with a pre-inserted bone screw, were prepared using a coring tool. Each core was removed and glued back in place with either the bone adhesive (α-tricalcium phosphate, phosphoserine and 20% trisodium citrate solution) or the fibrin glue. All glued bones were stored in bone medium at 37°C. Tensile loading, using a universal testing machine (5 kN load cell), was applied to each core/head. For the bone adhesive, bone cores were tested at 2 (n=13) and 24 (n=11) hours. For the fibrin tissue adhesive control group (n=9), bone cores were tested exclusively at 2 hours. The femoral bone quality was evaluated with micro-CT. RESULTS: The ultimate pull-out load for the bone adhesive at 2 hours ranged from 36 to 171 N (mean 94 N, SD 42 N). At 24 hours the pull-out strength was similar, 47 to 198 N (mean 123 N, SD 43 N). The adhesive failure usually occurred through the adhesive layer, however in two samples, at 167 N and 198 N the screw pulled out of the bone core. The fibrin tissue adhesive group reached a peak force of 8 N maximally at 2 hours (range 2.8-8 N, mean 5.4 N, SD 1.6 N). The mean BV/TV for femoral heads was 0.15 and indicates poor bone quality. CONCLUSION: The bone adhesive successfully glued wet and fatty tissue of osteoporotic human bone cores. The mean ultimate pull-out force of 123 N at 24 hours corresponds to â¼ 300 kPa shear stress acting on the bone core. These first ex-vivo results in human bone are a promising step toward potential clinical application in osteochondral fragment fixation.
Asunto(s)
Adhesivos , Cabeza Femoral , Fenómenos Biomecánicos , Cementos para Huesos/farmacología , Tornillos Óseos , Adhesivo de Tejido de Fibrina/farmacología , Humanos , FosfoserinaRESUMEN
The restoration of cranio-maxillofacial deformities often requires complex reconstructive surgery in a challenging anatomical region, with abnormal soft tissue structures and bony deficits. In this proof-of-concept, the possibility of vertical bone augmentation was explored by suspending hemispherically shaped titanium-reinforced porous calcium phosphate (CaP) implants (n = 12) over the frontal bone in a sheep model (n = 6). The animals were euthanized after week 13 and the specimens were subject to micro-computed tomography (µCT) and comprehensive histological analysis. Histology showed that the space between implant and the recipient bone was filled with a higher percentage of newly formed bone (NFB) versus soft tissue with a median of 53% and 47%, respectively. Similar results were obtained from the µ-CT analysis, with a median of 56% NFB and 44% soft tissue filling the void. Noteworthy, significantly higher bone-implant contact was found for the CaP (78%, range 14%-94%) versus the Titanium (29%, range 0%-75%) portion of the implant exposed to the surrounding bone. The histological analysis indicates that the CaP replacement by bone is driven by macrophages over time, emphasized by material-filled macrophages found in close vicinity to the CaP with only a small number of single osteoclasts found actively remodeling the NFB. This study shows that CaP based implants can be assembled with the help of additive manufacturing to guide vertical bone formation without decortification or administration of growth factors. Furthermore, it highlights the potential disadvantage of a seamless fit between the implant and the recipient's bone.
Asunto(s)
Osteogénesis , Titanio , Animales , Fosfatos de Calcio/farmacología , Oseointegración , Prótesis e Implantes , Ovinos , Titanio/química , Microtomografía por Rayos XRESUMEN
Precipitation is one of the most common processes to synthesize hydroxyapatite, which is the human body's mineral forming bone and teeth, and the golden bioceramic material for bone repair. Generally, the washing step is important in the precipitation method to remove the residuals in solution and to stabilize the phase transformation. However, the influence of residuals in combination with the reaction temperature and time, on calcium phosphate formation, is not well studied. This could help us with a better understanding of the typical synthesis process. We used a fixed starting ion concentration and pH in our study and did not adjust it during the reaction. XRD, FTIR, ICP-OES, and SEM have been used to analyze the samples. The results showed that combining residuals with both reaction temperature and time can significantly influence calcium phosphate formation and transformation. Dicalcium phosphate dihydrate formation and transformation are sensitive to temperature. Increasing temperature (60 °C) can inhibit the formation of acidic calcium phosphate or transform it to other phases, and further the particle size. It was also observed that high reaction temperature (60 °C) results in higher precipitation efficiency than room temperature. A low ion concentration combining reaction temperature and time could still significantly influence the calcium phosphate transformation during the drying.
RESUMEN
Biomaterial development is a long process consisting of multiple stages of design and evaluation within the context of both in vitro and in vivo testing. To streamline this process, mathematical and computational modeling displays potential as a tool for rapid biomaterial characterization, enabling the prediction of optimal physicochemical parameters. In this work, a Langmuir isotherm-based model was used to describe protein and cell adhesion on a biomimetic hydroxyapatite surface, both independently and in a one-way coupled system. The results indicated that increased protein surface coverage leads to improved cell adhesion and spread, with maximal protein coverage occurring within 48 h. In addition, the Langmuir model displayed a good fit with the experimental data. Overall, computational modeling is an exciting avenue that may lead to savings in terms of time and cost during the biomaterial development process.
RESUMEN
Pyrophosphate-containing calcium phosphate implants promote osteoinduction and bone regeneration. The role of pyrophosphate for inflammatory cell-mesenchymal stem cell (MSC) cross-talk during osteogenesis is not known. In the present work, the effects of lipopolysaccharide (LPS) and pyrophosphate (PPi) on primary human monocytes and on osteogenic gene expression in human adipose-derived MSCs were evaluated in vitro, using conditioned media transfer as well as direct effect systems. Direct exposure to pyrophosphate increased nonadherent monocyte survival (by 120% without LPS and 235% with LPS) and MSC viability (LDH) (by 16-19% with and without LPS). Conditioned media from LPS-primed monocytes significantly upregulated osteogenic genes (ALP and RUNX2) and downregulated adipogenic (PPAR-γ) and chondrogenic (SOX9) genes in recipient MSCs. Moreover, the inclusion of PPi (250 µM) resulted in a 1.2- to 2-fold significant downregulation of SOX9 in the recipient MSCs, irrespective of LPS stimulation or culture media type. These results indicate that conditioned media from LPS-stimulated inflammatory monocytes potentiates the early MSCs commitment towards the osteogenic lineage and that direct pyrophosphate exposure to MSCs can promote their viability and reduce their chondrogenic gene expression. These results are the first to show that pyrophosphate can act as a survival factor for both human MSCs and primary monocytes and can influence the early MSC gene expression. Graphical abstract.
Asunto(s)
Difosfatos/farmacología , Células Madre Mesenquimatosas/efectos de los fármacos , Células Madre Mesenquimatosas/fisiología , Monocitos/fisiología , Osteogénesis/efectos de los fármacos , Osteogénesis/fisiología , Regeneración Ósea/efectos de los fármacos , Regeneración Ósea/genética , Regeneración Ósea/fisiología , Comunicación Celular/efectos de los fármacos , Comunicación Celular/fisiología , Diferenciación Celular/efectos de los fármacos , Diferenciación Celular/fisiología , Supervivencia Celular/efectos de los fármacos , Supervivencia Celular/fisiología , Células Cultivadas , Medios de Cultivo Condicionados , Regulación hacia Abajo/efectos de los fármacos , Humanos , Lipopolisacáridos/farmacología , Ensayo de Materiales , Osteogénesis/genética , Regulación hacia Arriba/efectos de los fármacosRESUMEN
Controlled drug release and targeted drug delivery can reduce systemic toxicity of chemotherapeutics by restricting drugs to the target organ and increasing the local concentration. As tumors and inflamed tissue are often surrounded by an acidic microenvironment, pH-responsive calcium carbonates (CaCO3) are promising vehicles for controlled drug delivery applications. The aim of this study was to evaluate the loading efficacy and release of a chemotherapeutic drug, Hydroxyurea (HU), into the crystal structure of calcite. Incorporation of HU did not alter the crystallinity, crystal size, or morphology of precipitated calcite crystals, as assessed by XRD and SEM. The amount of HU was quantified by High-Pressure Liquid Chromatography (HPLC) and showed that 6.7 ± 0.7 µg of HU could be for each milligram of calcite (0.016 mol% ± 0.002). In cell media, the optimal pH for controlled release was 5 (0.1 mg/mL released after 1 h). However, in vitro, pH below 6.5 was cytotoxic to human breast cancer cells (MCF-7). Direct contact studies, where particles were incubated with MCF-7 cells, showed that the amount of HU release from calcite was not high enough to kill the cell or arrest growth at pH 6.5. Pre-dissolved release studies, where the particles were pre-dissolved in acidic media to simulate complete drug release in vivo, pH neutralized, and exposed to the cells, showed that the amount of loaded HU reduced the survival/proliferation of MCF7. In conclusion, it is possible to integrate HU into the crystal structure of a calcite crystal and release the drug in vitro at concentrations that can slow the growth of cancer cells, without affecting calcite morphology and crystallinity. Further research is needed to investigate the in vivo behavior of the particles and whether the actual tumor pH is low enough to achieve complete drug release in vivo.
RESUMEN
Osteoporotic fractures are a growing issue due to the increasing incidence of osteoporosis worldwide. High reoperation rates in osteoporotic fractures call for investigation into new methods in improving fixation of osteoporotic bones. In the present study, the strength of a recently developed bone bioadhesive, OsStictm, was evaluated in vivo using a novel bone core assay in a murine animal model at 0, 3, 7, 14, 28, and 42 days. Histology and micro-CT were obtained at all time points, and the mean peak pull-out force was assessed on days 0-28. The adhesive provided immediate fixation to the bone core. The mean peak bone core pull-out force gradually decreased from 6.09 N (σ 1.77 N) at day 0 to a minimum of 3.09 N (σ 1.08 N) at day 7, recovering to 6.37 N (σ 4.18 N) by day 28. The corresponding fibrin (Tisseel) control mean peak bone core pull-out characteristic was 0.27 N (σ 0.27 N) at day 0, with an abrupt increase from 0.37 N (σ 0.28) at day 3, 6.39 N (σ 5.09 N) at day 7, and continuing to increase to 11.34 N (σ 6.5 N) by day 28. The bone cores failed either through core pull-out or by the cancellous part of the core fracturing. Overall, the adhesive does not interrupt healing with pathological changes or rapid resorption. Initially, the adhesive bonded the bone core to the femur, and over time, the adhesive was replaced by a vascularised bone of equivalent quality and quantity to the original bone. At the 42 day time point, 70% of the adhesive in the cancellous compartment and 50% in the cortical compartment had been replaced. The adhesive outwith the bone shell was metabolized by cells that are only removing the material excess with no ectopic bone formation. It is concluded that the adhesive is not a physical and biochemical barrier as the bone heals through the adhesive and is replaced by a normal bone tissue. This adhesive composition meets many of the clinical unmet needs expressed in the literature, and may, after further preclinical assessments, have potential in the repair of bone and osteochondral fragments.
RESUMEN
Silk fibroin (SF) hydrogels have attracted extensive interest in biomedical applications due to their biocompatibility and wide availability. However, their generally poor mechanical properties limit their utility. Here, injectable, ready-to-use SF-based composites, simultaneously induced and reinforced by acidic calcium phosphates, were prepared via a dual-paste system requiring no complex chemical/physical treatment. The composite was formed by mixing a monocalcium phosphate monohydrate paste with a ß-tricalcium phosphate/SF paste. The conformational transition of SF in an acidic environment forms continuous networks, and the acidic calcium phosphate, brushite and monetite, formed simultaneously in the networks during mixing. The composites displayed a partly elastomeric compression behavior, with mechanical properties increasing with an increasing calcium phosphate and ß-sheet content at the lower calcium phosphate contents evaluated (22.2-36.4 wt%). While the stiffness was still relatively low, the materials presented a high elasticity and ductility, and no failure at stresses in the range of failure stresses of trabecular bone. Furthermore, the calcium phosphate confers bioactivity to the material, and the composites with a promising in vitro cell response also showed potential as drug vehicles, using vancomycin as a model drug. These dual-paste systems exhibit potential utility in biomedical applications, such as bone void fillers and drug vehicles.
Asunto(s)
Materiales Biocompatibles/química , Fosfatos de Calcio/química , Fibroínas/química , Hidrogeles/química , Concentración de Iones de HidrógenoRESUMEN
The golden standard to treat acute pain is by intravenous drug delivery of opioids such as fentanyl or morphine. Intravenous drug delivery requires the placement of an intravenous (IV) port, which can cause infections, dislodgments, and distress to the patients, and therefore a non-invasive method is desirable. Pulmonary drug delivery is a non-invasive method that has been shown to be a good alternative to intravenous administration. New devices have been investigated for treating acute pain by delivering fentanyl by heat. The pure drug, fentanyl, is applied onto a surface which is then heated up to 350 °C and inhaled, resulting in no formation of degradation products. Furthermore, forced degradation of fentanyl has been studied which showed that longer heating time and higher temperatures will result in the formation of degradation products. The evidence indicates that heat can be used to deliver drugs to the lungs where fast onset reaction can be obtained giving fast and non-invasive pain relief.
RESUMEN
The distribution of dopant atoms plays a key role in the effectiveness of doping, thereby requiring delicate characterizations. In this study, we found that energy-dispersive X-ray spectroscopy (EDX) and electron energy loss spectroscopy (EELS) techniques in scanning transmission electron microscopy (STEM) were not adequate to reveal the distribution of yttrium and the chemical composition of the ZrO2/SiO2 heterophase interface in an yttrium-doped ZrO2-SiO2 nanocrystalline glass-ceramic. Atom probe tomography (APT) is rarely utilized to characterize ceramics due to some inherent difficulties. However, we successfully revealed the three-dimensional distribution of ZrO2 nanocrystallites and SiO2 matrix at the atomic scale with APT under optimized and well-controlled conditions. We also found that the ZrO2 nanocrystallites had a special core-shell structure, with a thin Zr/Si interfacial layer as a shell and a ZrO2 solid solution as a core. Yttrium dopants showed interfacial segregation at both ZrO2 grain boundaries and the ZrO2/SiO2 heterophase interfaces.
RESUMEN
This study aimed to evaluate the occluding/remineralization performance and resistance to acid attacks of the mineralization layer formed by a tooth-desensitizing gel containing amorphous calcium magnesium phosphate (ACMP) particles and compare it to six other desensitizing products available on the market. Similar comprehensive studies are few and there is especially a lack of studies that are up to date. A dentin-disc model was used for in vitro evaluation of the desensitizing toothpastes/gels. Application of the products was performed twice daily for seven days. One set of specimens were evaluated using scanning electron microscopy (SEM) directly after the final treatment and another set was evaluated after an acid challenge, exposing specimens to 2 wt% citric acid. The ACMP desensitizing gel was the only product resulting in complete occlusion by the formation of mineralized material on the dentin surface and inside the tubules. Particle deposition was dominant after treatment with the other desensitizing products, with little or no mineralization, resulting in partial occlusion only. Sensodyne Repair & Protect and Oral-B Pro-Expert showed the highest resistance toward acid attacks. Material inside the tubules remained relatively unaffected by acid attacks in all specimens. The results in this study indicated a great variability among the occluding agents in terms of occlusion and acid resistance of the mineralization layer. The high degree of occlusion and intra-tubular mineralization that could mitigate the effect of acid solubilization indicate that the ACMP desensitizing gel may be a superior option for the treatment of dentin hypersensitivity.
RESUMEN
The use of calcium phosphates (CaPs) as synthetic bone substitutes should ideally result in a volumetric balance with concomitant bone formation and degradation. Clinical data on such properties is nevertheless lacking, especially for monetite-based CaPs. However, a monetite-based composite implant has recently shown promising cranial reconstructions, with both CaP degradation and bone formation. In this study, the volumetric change at the implant site was quantified longitudinally by clinical computed tomography (CT). The retrospective CT datasets had been acquired postoperatively (nâ¯=â¯10), in 1-year (nâ¯=â¯9) and 3-year (nâ¯=â¯5) follow-ups. In the 1-year follow-up, the total volumetric change at the implant site was -8⯱â¯8%. A volumetric increase (bone formation) was found in the implant-bone interface, and a volumetric decrease was observed in the central region (CaP degradation). In the subjects with 2- or 3-year follow-ups, the rate of volumetric decrease slowed down or plateaued. The reported degradation rate is lower than previous clinical studies on monetite, likely due to the presence of pyrophosphate in the monetite-based CaP-formulation. A 31-months retrieval specimen analysis demonstrated that parts of the CaP had been remodeled into bone. The CaP phase composition remained stable, with 6% transformation into hydroxyapatite. In conclusion, this study demonstrates successful bone-bonding between the CaP-material and the recipient bone, as well as a long-term volumetric balance in cranial defects repaired with the monetite-based composite implant, which motivates further clinical use. The developed methods could be used in future studies for correlating spatiotemporal information regarding bone regeneration and CaP degradation to e.g. patient demographics. STATEMENT OF SIGNIFICANCE: In bone defect reconstructions, the use of calcium phosphate (CaP) bioceramics ideally results in a volumetric balance between bone formation and CaP degradation. Clinical data on the volumetric balance is nevertheless lacking, especially for monetite-based CaPs. Here, this concept is investigated for a composite cranial implant. The implant volumes were quantified from clinical CT-data: postoperatively, one year and three years postoperatively. In total, -8⯱â¯8% (nâ¯=â¯9) volumetric change was observed after one year. But the change plateaued, with only 2% additional decrease at the 3-year follow-up (nâ¯=â¯5), indicating a lower CaP degradation rate. Osseointegration was seen at the bone-implant interface, with a 9⯱â¯7% volumetric change after one year. This study presented the first quantitative spatiotemporal CT analysis of monetite-based CaPs.
Asunto(s)
Fosfatos de Calcio , Osteogénesis , Humanos , Estudios Retrospectivos , Cráneo/diagnóstico por imagenRESUMEN
In a 52 week ovine calvaria implantation model, the restoration of cranial defects with a bare titanium mesh (Ti-mesh) and a titanium mesh embedded in a calcium phosphate (CaP-Ti) were evaluated in seven animals. During the study, no major clinical abnormalities were observed, and all sheep presented a normal neurologic assessment. Blood and cerebrospinal fluid analysis, made at termination, did not show any abnormalities. No indentation of the soft tissue was observed for either test article; however, the Ti-mesh burr-hole covers were associated with filling of the calvarial defect by fibrous tissue mainly. Some bone formation was observed at the bottom of the created defect, but no significant bone was formed in the proximity of the implant. The defect sites implanted with CaP-Ti were characterized by a moderate degradation of the calcium phosphate (CaP) that was replaced by mature bone tissue. Calcium-phosphate-filled macrophages were observed in all animals, indicating that they might play a vital role in osteogenesis. The newly formed bone was present, especially at the bony edges of the defect and on the dura side. Integration of the Ti-mesh in a CaP improved bone formation and osteointegration in comparison to a bare Ti-mesh.
Asunto(s)
Osteogénesis , Titanio , Animales , Fosfatos de Calcio , Prótesis e Implantes , Ovinos , CráneoRESUMEN
Existing methods for testing prosthetic implants suffer from critical limitations, creating an urgent need for new strategies that facilitate research and development of implants with enhanced osseointegration potential. Herein, we describe a novel, biomimetic, human bone platform for advanced testing of implants in vitro, and demonstrate the scientific validity and predictive value of this approach using an assortment of complementary evaluation methods. We anchored titanium (Ti) and stainless steel (SS) implants into biomimetic scaffolds, seeded with human induced mesenchymal stem cells, to recapitulate the osseointegration process in vitro. We show distinct patterns of gene expression, matrix deposition, and mineralization in response to the two materials, with Ti implants ultimately resulting in stronger integration strength, as seen in other preclinical and clinical studies. Interestingly, RNAseq analysis reveals that the TGF-beta and the FGF2 pathways are overexpressed in response to Ti implants, while the Wnt, BMP, and IGF pathways are overexpressed in response to SS implants. High-resolution imaging shows significantly increased tissue mineralization and calcium deposition at the tissue-implant interface in response to Ti implants, contributing to a twofold increase in pullout strength compared to SS implants. Our technology creates unprecedented research opportunities towards the design of implants and biomaterials that can be personalized, and exhibit enhanced osseointegration potential, with reduced need for animal testing.