Bioinspired poly-dopamine/nano-hydroxyapatite: an upgrading biocompatible coat for 3D-printed polylactic acid scaffold for bone regeneration.

Poly-lactic acid (PLA) has been proposed in dentistry for several regenerative procedures owing to its biocompatibility and biodegradability. However, the presence of methyl groups renders PLA hydrophobic, making the surface less ideal for cell attachment, and it does not promote tissue regeneration. Upgrading PLA with inductive biomaterial is a crucial step to increase the bioactivity of the PLA and allow cellular adhesion. Our purpose is to evaluate biocompatibility, bioactivity, cellular adhesion, and mechanical properties of 3D-printed PLA scaffold coated with poly-dopamine (PDA) and nano-hydroxyapatite (n-HA) versus PLA and PLA/n-HA scaffolds. The fused deposition modelling technique was used to print PLA, PLA with embedded n-HA particles, and PLA scaffold coated with PDA/n-HA by immersion. After matrices characterization for their chemical composition and surface properties, testing the compressive strength was pursued using a universal testing machine. The bioactivity of scaffolds was evaluated by monitoring the formation of calcium phosphate compounds after simulated body fluid immersion. The PLA/PDA/n-HA scaffold showed the highest compressive strength which was 29.11 ± 7.58 MPa with enhancing calcium phosphate crystals deposition with a specific calcium polyphosphate phase formed exclusively on PLA/PDA/n-HA. With cell viability assay, the PDA/n-HA-coated matrix was biocompatible with increase in the IC50, reaching ⁓ 176.8 at 72 without cytotoxic effect on the mesenchymal stem cells, promoting their adhesion and proliferation evaluated by confocal microscopy. The study explored the biocompatibility, bioactivity, and the cell adhesion ability of PDA/n-HA coat on a 3D-printed PLA scaffold that qualifies its use as a promising regenerative material.

Biocompatibility profile of aged pigmented and non-pigmented silicone elastomer for combined maxillofacial defects.

PURPOSE: To assess the biocompatibility of platinum silicone elastomer A-2000 used in combined maxillofacial defects prosthesis, after being deteriorated by an accelerated aging process resembling both the extra and intraoral environment. This assessment was done indirectly on human-derived dermal and gingival tissues. MATERIALS AND METHODS: One hundred eight samples of room-temperature vulcanized A-2000 platinum silicone were equally divided into extrinsically pigmented and non-pigmented groups to replicate combined maxillofacial defects. Accelerated aging was applied to pigmented samples to mimic extra- and intra-oral conditions, while non-aged counterparts served as controls. After isolating human cell lineages, dermal and gingival fibroblasts were indirectly exposed to silicone sample media. Cytotoxicity to cultured fibroblasts was assessed via MTT assay. Statistical significance was determined by repeated measures of one-way ANOVA (p < 0.01), evaluating cytotoxicity on dermal and gingival fibroblasts. RESULTS: MTT assay showed increased cytotoxicity in pigmented silicon samples subjected to extraoral aging compared to non-aged counterparts (p < 0.01). Non-pigmented silicon, modeling intraoral conditions, exhibited cytotoxicity after 48 h (p < 0.05). Both aged and non-aged silicon extracts equally sensitized gingival fibroblasts at 72 h (p < 0.001). Negative correlations between pigmented and non-pigmented silicon were observed in dermal cell growth (p > 0.05, except at 24 h, r = 0.2), with accelerated aging showing minimal impact on the pigmentation effect (p > 0.05). CONCLUSION: The retrieved diminished cellular metabolic activity of platinum silicone elastomer was in an acceptable clinical range, pointing out the importance of periodic assessments of the maxillofacial prosthesis for replacement depending on aging and cytotoxic harmful cellular responses.

Codelivery of ivermectin and methyl dihydrojasmonate in nanostructured lipid carrier for synergistic antileukemia therapy.

Chronic myeloid leukemia is a life-threatening blood-cancer prevalent among children and adolescents. Research for innovative therapeutics combine drug-repurposing, phytotherapeutics and nanodrug-delivery. Ivermectin (Ivn) is a potent anthelmintic, repurposed for antileukemic-activity. However, Ivn exerts off-target toxicity. Methyl-dihydrojasmonate (MJ) is a phytochemical of known antileukemic potential. Herein, we developed for the first-time Ivn/MJ-coloaded nanostructured-lipid-carrier (Ivn@MJ-NLC) for leveraging the antileukemic-activity of the novel Ivn/MJ-combination while ameliorating possible adverse-effects. The developed Ivn@MJ-NLC possessed optimum-nanosize (97 ± 12.70 nm), PDI (0.33 ± 0.02), entrapment for Ivn (97.48 ± 1.48 %) and MJ (99.48 ± 0.57 %) and controlled-release of Ivn (83 % after 140 h) and MJ (80.98 ± 2.45 % after 48 h). In-vitro K562 studies verified Ivn@MJ-NLC prominent cytotoxicity (IC50 = 35.01 ± 2.23 µg/mL) with pronounced Ivn/MJ-synergism (combination-index = 0.59) at low-concentrations (5-10 µg/mL Ivn). Superior Ivn@MJ-NLC cytocompatibility was established on oral-epithelial-cells (OEC) with high OEC/K562 viability-ratio (1.49-1.85). The innovative Ivn@MJ-NLC enhanced K562-nuclear-fragmentation and afforded upregulation of caspase-3 and BAX (1.71 ± 0.07 and 1.45 ± 0.07-fold-increase, respectively) compared to control. Ex-vivo hemocompatibility and in-vivo-biocompatibility of parenteral-Ivn@MJ-NLC, compared to Ivn-solution, was verified via biochemical-blood analysis, histological and histomorphometric studies of liver and kidney tissues. Our findings highlight Ivn@MJ-NLC as an Ivn/MJ synergistic antileukemic platform, ameliorating possible adverse-effects.

The effectiveness of Carie-Care™, chemomechanical caries removal technique in primary teeth: randomized controlled clinical trial.

BACKGROUND: Chemomechanical techniques for caries removal have been introduced to overcome the shortcomings of the conventional rotatory instruments. This study aimed to clinically evaluate the effectiveness of the chemomechanical method of caries removal (Carie-Care™) over mechanical caries removal through the Atraumatic Restorative Technique in pediatric patients. METHODS: A randomized controlled clinical trial was conducted. Fifty children fulfilling inclusion criteria were recruited from the outpatient clinic of Pediatric and Dental Public health department, Faculty of Dentistry, Alexandria University. Fifty open carious primary molars were randomly assigned into 2 equal groups according to the method of caries removal. In Group I (test group), caries was removed using the Carie-Care™ system and in Group II (control group), by using mechanical caries removal through the atraumatic restorative technique. Resin modified glass ionomer was used for teeth restoration, the two techniques were compared in each child according to time taken for caries removal, efficacy of caries removal, pain assessment, and child behavior. RESULTS: The mean time taken for caries removal in the Carie-Care™ treatment group was (575.6 ± 114.8) seconds which was statistically significant higher as compared with the ART treatment group (346.1 ± 97.4) seconds (p < 0.001). The mean score of efficacy in caries removal was (0.6 ± 0.8) in the Carie-Care™ group, and (1.3 ± 0.7) in the ART treatment group. When compared to ART, Carie-Care™ was significantly more efficient in caries removal (p < 0.002). When pain was assessed by the SEM scale, it was observed that the Carie-Care™ caries removal technique showed statistically significantly more comfort during the procedure compared with the ART procedure (p < 0.001).Moreover, children in the Carie-Care™ group enjoyed the process and showed more cooperative behavior when assessed at the end of procedure than those in the ART group with statistically significant difference (p = 0.002). CONCLUSIONS: Removal of carious tissue in primary teeth using Chemomechanical Carie-Care™ gel proved to be more time consuming than ART, but on the other hand it was more efficient, comfortable, and accepted by the pediatric patients.

The suppression of MAPK/NOX/MMP signaling prompts renoprotection conferred by prenatal naproxen in weaning preeclamptic rats.

Although nonsteroidal antiinflammatory drugs (NSAIDs) are frequently used for fever and pain during pregnancy, their possible interaction with perinatal renal injury induced by preeclampsia (PE) has not been addressed. Here, studies were undertaken in the N(gamma)-nitro-L-arginine methyl ester (L-NAME) PE model to assess the influence of gestational NSAIDs on renal damage in weaning dams. PE-evoked increments and decrements in urine protein and creatinine clearance, respectively, were intensified by celecoxib and weakened by diclofenac or naproxen. Naproxen also improved renal cloudy swelling, necrosis, and reduced glomerular area evoked by PE. The concomitant rises in renal expression of markers of oxidative stress (NOX2/4), extracellular matrix metaloproteinase deposition (MMP9), and prostanoids (PGE2, PGF2α, TXA2) were all more effectively reduced by naproxen compared with celecoxib or diclofenac. Western blotting showed tripled expression of mitogen-activated protein kinases (MAPKs; p-p38, p-JNK1, p-ERK1, p-ERK2) in PE kidneys that was overturned by all NSAIDs, with naproxen producing the largest drop in p-ERK2 expression. The PE-provoked elevation in renal expression of autophagic marker LC3 was reduced by naproxen and diclofenac, but not celecoxib. The data suggests superior effect for naproxen over other NSAIDs in rectifying preeclamptic renal injury and predisposing inflammatory, oxidative, autophagic, and fibrotic signals.

Novel tetrahydrocurcumin integrated mucoadhesive nanocomposite κ-carrageenan/xanthan gum sponges: a strategy for effective local treatment of oral cancerous and precancerous lesions.

Oral cancer is one of the leading causes of death worldwide. Oral precancerous lesions (OPL) are the precursors of oral cancer, with varying degrees of progression. Tetrahydrocurcumin (THC) is a major metabolite of curcumin with superior anticancer properties against various types of cancer. However, THC's clinical outcome is limited by its poor aqueous solubility. Herein, we developed novel mucoadhesive biopolymer-based composite sponges for buccal delivery of THC, exploiting nanotechnology and mucoadhesion for efficient prevention and treatment of oral cancer. Firstly, THC-nanocrystals (THC-NC) were formulated and characterized for subsequent loading into mucoadhesive composite sponges. The anticancer activity of THC-NC was assessed on a human tongue squamous carcinoma cell line (SCC-4). Finally, the chemopreventive activity of THC-NC loaded sponges (THC-NC-S) was examined in DMBA-induced hamster OPL. The selected THC-NC exhibited a particle size of 532.68 ± 13.20 nm and a zeta potential of -46.08 ± 1.12 mV. Moreover, THC-NC enhanced the anticancer effect against SCC-4 with an IC50 value of 80 µg/mL. THC-NC-S exhibited good mucoadhesion properties (0.24 ± 0.02 N) with sustained drug release, where 90% of THC was released over 4 days. Furthermore, THC-NC-S had a magnificent potential for maintaining high chemopreventive activity, as demonstrated by significant regression in the dysplasia degree and a decline in cyclin D1 (control: 40.4 ± 12.5, THC-NC-S: 12.07 ± 5.2), culminating in significant amelioration after 25 days of treatment. Conclusively, novel THC-NC-S represent a promising platform for local therapy of OPL, preventing their malignant transformation into cancer.

Bioinspired 3D-printed scaffold embedding DDAB-nano ZnO/nanofibrous microspheres for regenerative diabetic wound healing.

There is a constant demand for novel materials/biomedical devices to accelerate the healing of hard-to-heal wounds. Herein, an innovative 3D-printed bioinspired construct was developed as an antibacterial/regenerative scaffold for diabetic wound healing. Hyaluronic/chitosan (HA/CS) ink was used to fabricate a bilayer scaffold comprising a dense plain hydrogel layer topping an antibacterial/regenerative nanofibrous layer obtained by incorporating the hydrogel with polylactic acid nanofibrous microspheres (MS). These were embedded with nano ZnO (ZNP) or didecyldimethylammonium bromide (DDAB)-treated ZNP (D-ZNP) to generate the antibacterial/healing nano/micro hybrid biomaterials, Z-MS@scaffold and DZ-MS@scaffold. Plain and composite scaffolds incorporating blank MS (blank MS@scaffold) or MS-free ZNP@scaffold and D-ZNP@scaffold were used for comparison. 3D printed bilayer constructs with customizable porosity were obtained as verified by SEM. The DZ-MS@scaffold exhibited the largest total pore area as well as the highest water-uptake capacity andin vitroantibacterial activity. Treatment ofStaphylococcus aureus-infected full thickness diabetic wounds in rats indicated superiority of DZ-MS@scaffold as evidenced by multiple assessments. The scaffold afforded 95% wound-closure, infection suppression, effective regulation of healing-associated biomarkers as well as regeneration of skin structure in 14 d. On the other hand, healing of non-diabetic acute wounds was effectively accelerated by the simpler less porous Z-MS@scaffold. Information is provided for the first-time on the 3D printing of nanofibrous scaffolds using non-electrospun injectable bioactive nano/micro particulate constructs, an innovative ZNP-functionalized 3D-printed formulation and the distinct bioactivity of D-ZNP as a powerful antibacterial/wound healing promotor. In addition, findings underscored the crucial role of nanofibrous-MS carrier in enhancing the physicochemical, antibacterial, and wound regenerative properties of DDAB-nano ZnO. In conclusion, innovative 3D-printed DZ-MS@scaffold merging the MS-boosted multiple functionalities of ZNP and DDAB, the structural characteristics of nanofibrous MS in addition to those of the 3D-printed bilayer scaffold, provide a versatile bioactive material platform for diabetic wound healing and other biomedical applications.

Myricitrin: A promising herbal therapy for periodontitis in immunosuppressed status.

Background: Periodontitis is a complex chronic inflammatory disease aggravated in immunosuppressed patients. However, adjuvant therapies can alleviate severe inflammation and slow down disease progression. Objective: To evaluate the efficacy of myricitrin, a herbal flavonoid glycoside, in reducing immunosuppression-associated periodontitis and compare its effects with that of alendronate on alveolar bone regeneration. Methods: Fifty albino Wistar rats were randomly allocated to the control, periodontitis, immunosuppressant, myricitrin, and alendronate groups. Ligature-associated periodontitis was induced in all groups, except the control group. Cyclosporin A (CsA) was administered subcutaneously in the immunosuppressant group for immunosuppression. The myricitrin group received CsA and myricitrin, whereas the alendronate group received CsA and alendronate. The therapeutic efficacies of myricitrin and alendronate were compared histologically, morphometrically, and biochemically. Results: Myricitrin reversed bone destruction in the periodontitis and immunosuppressant groups. Morphometrically, myricitrin showed comparable improvements to alendronate in terms of gaining more bone area to 49.4 ± 4.6 and 59.5 ± 2%, respectively (P < 0.001 in relation to the untreated periodontitis group). Concomitantly, myricitrin increased osteoblast count significantly to 28.4 ± 4.7 closer to the 34.5 ± 2.4 count in the alendronate group (P < 0.001 compared with 22.5 ± 2.6 count of the immunosuppressant group). Moreover, myricitrin restored the serum calcium to 9.4 ± 0.6 mg/dL and alkaline phosphatase up to 112.9 ± 2.9 IU/L, which were almost normal levels similar to the control cohort (P > 0.05). Conclusion: Myricitrin showed beneficial effects in counteracting bone resorption in subjects with immunosuppression-associated periodontitis. Its efficacy in slowing down disease progression was comparable to that of alendronate.

Atorvastatin liposomes in a 3D-printed polymer film: a repurposing approach for local treatment of oral candidiasis.

Oral candidiasis (OC) is an opportunistic fungal infection, common amongst the elderly and the immunocompromised. Unfortunately, the therapeutic efficacy of common antifungals is imperiled by the rise of antifungal drug resistance. An alternative promising therapeutic option possibly contributing to antifungal therapy is drug repurposing. Herein, we aimed to employ novel pharmaceutical drug delivery for enhancing the emerging antifungal potential of the hypocholesterolemic drug atorvastatin (ATV). ATV-propylene-glycol-liposomes (ATV/PG-Lip) were prepared then integrated in 3D-printed (3DP) mucoadhesive films comprising chitosan, polyvinyl-alcohol and hydroxypropyl methylcellulose, as an innovative blend, for the management of OC. ATV/PG-Lip demonstrated good colloidal properties of particle size (223.3 ± 2.1 nm), PDI (0.12 ± 0.001) and zeta potential (-18.2 ± 0.3 mV) with high entrapment efficiency (81.15 ± 1.88%) and sustained drug release. Also, ATV/PG-Lip showed acceptable three-month colloidal stability and in vitro cytocompatibility on human gingival fibroblasts. The developed 3DP-films exhibited controlled ATV release (79.4 ± 1.4% over 24 h), reasonable swelling and mucoadhesion (2388.4 ± 18.4 dyne/cm2). In vitro antifungal activity of ATV/PG-Lip was confirmed against fluconazole-resistant Candida albicans via minimum inhibitory concentration determination, time-dependent antifungal activity, agar diffusion and scanning electron microscopy. Further, ATV/PG-Lip@3DP-film exceeded ATV@3DP-film in amelioration of infection and associated inflammation in an in vivo oral candidiasis rabbit model. Accordingly, the results confirm the superiority of the fabricated ATV/PG-Lip@3DP-film for the management of oral candidiasis and tackling antifungal resistance.

Photo-excitable zinc sulfide nanoparticles: A theranostic nanotool for cancer management.

OBJECTIVES: Zinc sulfide nanoparticles (ZnS NPs), as one of the quantum dots less than 10 nm, possess unique size-dependent autofluorescence. Excitation of their valence electrons by energy higher than the bandgap reveals the ZnS NPs' inherited photocatalysis with additive cytotoxic consequences of reactive oxygen species (ROS) release. Coupling the cytotoxicity of photoactivated ZnS NPs with their autofluorescence would be a novel theranostic modality, combating superficially accessible carcinoma. MATERIAL AND METHODS: After synthesizing and characterization of ZnS NPs, we verified their photocatalysis and electron donation upon UV excitation in degrading organic dye and DNA cleavage, respectively. We then tested the efficacy of UV-activated ZnS NPs to induce ROS-dependent apoptosis in squamous cell carcinoma and breast cancer cell lines. RESULTS: The energetic electron-hole pairs generated upon UV excitation of ZnS NPs with the consequent cascade of ROS release revealed potent apoptotic cancer cell deaths, compared with single treatment modalities of nonexcited nanoparticles and UV. Moreover, the inherited luminescence of ZnS NPs enabled visualization of their predominant intracytoplasmic uptake with tracking of their cellular response. CONCLUSION: The intensified luminescence and the fortified cytotoxicity of photoactivated ZnS NPs enhance their theranostic qualifications, boosting their antitumorigenic use.

Antibacterial effect and impact on caries activity of nanosilver fluoride and silver diamine fluoride in dentin caries of primary teeth: a randomized controlled clinical trial.

BACKGROUND: The use of silver diamine fluoride (SDF) in caries treatment in children has increased despite the disadvantage of causing tooth discoloration. Nanosilver fluoride (NSF) is a possible alternative. This study aimed to assess the antibacterial effect of NSF and SDF and their impact on the activity of dentin caries in primary teeth. METHODS: Synthesis and characterization of the physical and biological properties of NSF were conducted. Fifty children aged 4-6 years with dentin caries (active caries corresponding to ICDAS code 5) in deciduous teeth were randomly assigned to treatment by NSF or SDF. Baseline assessment of Streptococcus mutans (S. mutans) and lactobacilli counts as CFU/mL in caries lesions was done, followed by the application of the agents. After one month, microbiological samples were recollected, and lesion activity was reassessed. Groups were compared using Mann-Whitney and Chi-Square tests, while intragroup comparisons were done using Wilcoxon and McNemar tests. Multilevel logistic regression analysis was used to assess the effect of different variables on the outcomes. RESULTS: There were 130 teeth in 50 children; mean ± SD age = 4.75 ± 0.76 years, 63% were posterior teeth. At the one-month follow-up appointment, both groups showed a significant decrease from baseline bacterial counts. There was a significant difference in the reduction of S. mutans between NSF and SDF (21.3% and 10.5%, respectively, p = 0.002), while not in lactobacilli (13.9% and 6.0%, respectively, p = 0.094). In both groups, there was a significant reduction in the number of active caries from baseline (p < 0.0001) with no significant difference between groups (percentage inactive = 64.4% and 63.4%, p = 0.903). Multilevel regression revealed non-significant differences in S. mutans and lactobacilli counts (AOR 1.281, p = 0.737 and 1.888, p = 0.341, respectively), and in the number of inactive lesions (AOR 1.355, p = 0.731) between groups. CONCLUSION: The short-term antibacterial efficacy of NSF was similar to that of SDF. In both groups there was a significant reduction of S. mutans and lactobacilli counts in active dentin caries, and two-thirds of the lesions became inactive with no differences between the two interventions. Further research is needed to investigate the long-term efficacy of NSF and its suitability for clinical use in caries management. TRIAL REGISTRATION: This trial was prospectively registered on the clinicaltrials.gov registry with ID: NCT05221749 on 03/02/2022.

The theranostic potentialities of bioavailable nanocurcumin in oral cancer management.

BACKGROUND: Oral cancer, one of the most common cancers, has unimproved 5-years survival rate in the last 30 years and the chemo/radiotherapy-associated morbidity. Therefore, intervention strategies that evade harmful side effects of the conventional treatment modalities are of need. Herbal therapy as a complementary preventive/therapeutic modality has gained attention. Curcumin is one of the herbal compounds possessing unique anticancer activity and luminescent optical properties. However, its low water solubility limits its efficacy. In contrast, curcumin at the nanoscale shows altered physical properties with enhancing bioavailability. METHODS: The current study evaluated the impact of nanocurcumin as an anti-oral cancer herbal remedy, comparing its efficacy against the native curcumin complement and conventional chemotherapeutic. An optimized polymeric-stabilized nanocurcumin was synthesized using the solvent-antisolvent precipitation technique. After assuring the solubility and biocompatibility of nanocurcumin, we determined its cytotoxic dose in treating the squamous cell carcinoma cell line. We then evaluated the anti-tumorigenic activity of the nano-herb in inhibiting wound closure and the cytological alterations of the treated cancer cells. Furthermore, the cellular uptake of the nanocurcumin was assessed depending on its autofluorescence. RESULTS: The hydrophilic optimized nanocurcumin has a potent cancerous cytotoxicity at a lower dose (60.8 µg/mL) than the native curcumin particles (212.4 µg/mL) that precipitated on high doses hindering their cellular uptake. Moreover, the nanocurcumin showed differential targeting of the cancer cells over the normal fibroblasts with a selectivity index of 4.5. With the confocal microscopy, the luminescent nanoparticles showed gradual nuclear and cytoplasmic uptake with apparent apoptotic cell death, over the fluorescent doxorubicin with its necrotic effect. Furthermore, the nanocurcumin superiorly inhibited the migration of cancer cells by -25%. CONCLUSIONS: The bioavailable nanocurcumin has better apoptotic cytotoxicity. Moreover, its superior luminescence promotes the theranostic potentialities of the nano-herb combating oral cancer.

The antibacterial effect of nanosilver fluoride in relation to caries activity in primary teeth: a protocol for a randomized controlled clinical trial.

BACKGROUND: Minimally invasive dentistry is a highly convenient and efficient method of managing caries in pediatric patients. Silver diamine fluoride (SDF) is commonly used to arrest active caries lesions. However, the associated black stain, possibility of soft tissue injury, and unpleasant taste often limit its use. Recently, nanosilver fluoride (NSF) emerged as a promising topical fluoride agent with potent cariostatic and antibacterial potentials. This novel anticaries agent has gained attention as an alternative to overcome the drawbacks of SDF in caries arrest. OBJECTIVES: To assess the antibacterial effect of NSF in relation to caries activity in dentin caries lesions, as well as to investigate the change in saliva bacterial levels in primary teeth in comparison to SDF after 1 and 3 months. MATERIALS AND METHODS: Fifty children aged 4 to 6 years old with active dentin caries lesions (score 5 according to International Detection and Assessment System (ICDAS II) criteria) will be enrolled in the study. They will be equally and randomly allocated into 2 groups: a group receiving NSF and a control group receiving SDF treatment. Microbiological samples will be collected from the carious lesions and from unstimulated saliva at the baseline and at the 1 and 3 months' follow-up appointments. Bacterial counts will be assessed using Mitis Salivarius agar (selective culture media for S. mutans) and Rogosa agar (selective culture media for lactobacilli), and the results will be expressed in colony-forming units. Data regarding the children's oral health will be collected and their dmf index will be scored. The arrest of active carious lesions will be measured at the follow-up appointments according to ICDAS II criteria. RESULTS: The relation between bacterial colony counts and lesion activity for both groups will be assessed, as well as the change in salivary bacterial counts. The collected data will be statistically evaluated and tabulated. This clinical trial has been registered on ClinicalTrials.gov in January 2022 (original version) with ID: NCT05221749.

Cardiac stem cells: Current knowledge and future prospects.

Regenerative medicine is the field concerned with the repair and restoration of the integrity of damaged human tissues as well as whole organs. Since the inception of the field several decades ago, regenerative medicine therapies, namely stem cells, have received significant attention in preclinical studies and clinical trials. Apart from their known potential for differentiation into the various body cells, stem cells enhance the organ's intrinsic regenerative capacity by altering its environment, whether by exogenous injection or introducing their products that modulate endogenous stem cell function and fate for the sake of regeneration. Recently, research in cardiology has highlighted the evidence for the existence of cardiac stem and progenitor cells (CSCs/CPCs). The global burden of cardiovascular diseases' morbidity and mortality has demanded an in-depth understanding of the biology of CSCs/CPCs aiming at improving the outcome for an innovative therapeutic strategy. This review will discuss the nature of each of the CSCs/CPCs, their environment, their interplay with other cells, and their metabolism. In addition, important issues are tackled concerning the potency of CSCs/CPCs in relation to their secretome for mediating the ability to influence other cells. Moreover, the review will throw the light on the clinical trials and the preclinical studies using CSCs/CPCs and combined therapy for cardiac regeneration. Finally, the novel role of nanotechnology in cardiac regeneration will be explored.

3D printed bioinspired scaffolds integrating doxycycline nanoparticles: Customizable implants for in vivo osteoregeneration.

3D printing has revolutionized pharmaceutical research, with applications encompassing tissue regeneration and drug delivery. Adopting 3D printing for pharmaceutical drug delivery personalization via nanoparticle-reinforced hydrogel scaffolds promises great regenerative potential. Herein, we engineered novel core/shell, bio-inspired, drug-loaded polymeric hydrogel scaffolds for pharmaceutically personalized drug delivery and superior osteoregeneration. Scaffolds were developed using biopolymeric blends of gelatin, polyvinyl alcohol and hyaluronic acid and integrated with composite doxycycline/hydroxyapatite/polycaprolactone nanoparticles (DX/HAp/PCL) innovatively via 3D printing. The developed scaffolds were optimized for swelling pattern and in-vitro drug release through tailoring the biphasic microstructure and wet/dry state to attain various pharmaceutical personalization platforms. Freeze-dried scaffolds with nanoparticles reinforcing the core phase (DX/HAp/PCL-LCS-FD) demonstrated favorably controlled swelling, preserved structural integrity and controlled drug release over 28 days. DX/HAp/PCL-LCS-FD featured double-ranged pore size (90.4 ± 3.9 and 196.6 ± 38.8 µm for shell and core phases, respectively), interconnected porosity and superior mechanical stiffness (74.5 ± 6.8 kPa) for osteogenic functionality. Cell spreading analysis, computed tomography and histomorphometry in a rabbit tibial model confirmed osteoconduction, bioresorption, immune tolerance and bone regenerative potential of the original scaffolds, affording complete defect healing with bone tissue. Our findings suggest that the developed platforms promise prominent local drug delivery and bone regeneration.

Engineering 3D-printed core-shell hydrogel scaffolds reinforced with hybrid hydroxyapatite/polycaprolactone nanoparticles for in vivo bone regeneration.

The versatility of 3D printing has rendered it an indispensable tool for the fabrication of composite hydrogel scaffolds, offering bone biomimetic features through inorganic and biopolymeric components as promising platforms for osteoregeneration. In this work, extrusion-based 3D printing was employed for the realization of osteoconductive composite biopolymer-based hydrogel scaffolds reinforced with hybrid bioactive hydroxyapatite/polycaprolactone nanoparticles (HAp/PCL NPs) for osteoregeneration. The printing technique was optimized for ink printability and viscosity and crosslinking parameters, where a biopolymeric blend of gelatin, polyvinyl alcohol and hyaluronic acid was developed as innovative plain polymeric ink (PPI). Scaffolds were fabricated by 3D printing adopting a biphasic core/shell geometry, where the core phase of the scaffolds was reinforced with HAp/PCL NPs; the scaffolds were then freeze-dried. Novel composite freeze-dried, loaded-core scaffolds, HAp/PCL NPs-LCS-FD exhibited controlled swelling and maintained structural integrity for 28 days. The developed HAp/PCL NPs-LCS-FD also demonstrated double-ranged pore size, interconnected porosity and efficient mechanical stiffness and strength, favorable for osteoconductive actions. Cell infiltration studies, computed tomography and histomorphometry demonstrated that HAp/PCL NPs-LCS-FD afforded osteoconduction, biodegradation, biocompatibility and bone healing in rabbit tibial model, acting as a template for new bone formation. Our findings suggest that HAp/PCL NPs-LCS-FD could offer prominent bone regeneration and could be involved in various bone defects.

Central Odontogenic Fibroma with Giant Cell Granuloma-Like Lesion: A Report of an Additional Case and Review of Literature.

Central odontogenic fibroma is a rare benign odontogenic tumor that relies on clinical-radiographic-histological correlation to reach its diagnosis, especially its rare variants. Of these rare types is the coexistence of giant cell granuloma-like lesion, with the characteristic odontogenic epithelial rests. The presented case is a 33 years old female complaining of asymptomatic mandibular bony swelling. Radiographically, the lesion is unilocular radiolucent, without root resorption. Histological examination revealed the presence of multinucleated giant cells within the diagnosed central odontogenic fibroma. Immunohistochemical staining highlighted the presence of both components.

Function of gold nanoparticles in oral cancer beyond drug delivery: Implications in cell apoptosis.

OBJECTIVES: Gold nanoparticles (AuNPs) are used to deliver drugs and therapeutic small molecule inhibitors to cancer cells. Evidence shows that AuNPs coated with nuclear localization sequence can cross the nuclear membrane and induce cellular apoptosis. To determine the therapeutic role of AuNPs, we compared two nanoconstructs conjugated to doxorubicin (DOX) through pH-sensitive and pH-resistant linkers. MATERIALS AND METHODS: We tested DOX nanoconjugates' cytotoxicity, cellular and nuclear uptake in oral squamous cell carcinoma cell line. Furthermore, we evaluated the therapeutic effect of pH-sensitive and pH-resistant DOX bioconjugates in hamster buccal pouch carcinoma model. RESULTS: Our data indicate that pH-resistant and pH-sensitive DOX-nanoconjugates were equally localized in cancer cells, but the pH-resistant DOX nanoparticles were more localized in the nuclei inducing a 2-fold increase in the apoptotic effect compared with the pH-sensitive DOX nanoparticles. Our in vivo results show significantly higher tumor shrinkage and survival rates in animals treated with DOX pH-resistant AuNPs compared with pH-sensitive ones. CONCLUSION: Our findings suggest that AuNPs enhance the cytotoxic effect against cancer cells in addition to acting as drug carriers. DOX pH-resistant AuNPs enhanced accumulation of AuNPs in cancer cells' nuclei inducing a significant cellular apoptosis which was confirmed using in vitro and in vivo experiments without deleterious effects on blood cell count.