Auristatin antibody drug conjugate physical instability and the role of drug payload.

The conjugation of hydrophobic cytotoxic agents such as monomethyl auristatin E (MMAE) to the interchain sulfhydryl groups of monoclonal antibodies (Mabs) through a protease-labile linker generates a heterogeneous drug load distribution. The conjugation process can generate high-drug-load species that can affect the physical stability of antibody-drug conjugates (ADCs). In this study, the mechanism of physical instability of ADCs was investigated by formulating the ADC pool as well as isolated drug load species in high and low ionic strength buffers to understand the effect of ionic strength on the stability of drug-conjugated Mabs. The results showed that the presence of high ionic strength buffer led to time-dependent aggregate and fragment formation of ADCs, predominantly ADCs with high-drug-load species under stress conditions. In addition, differential scanning calorimetry (DSC) results confirmed that there is a direct correlation between thermal unfolding and drug payload and that specific changes in the DSC thermogram profiles can be assigned to modifications by MMAE.

Hexyl glucoside and hexyl maltoside inhibit light-induced oxidation of tryptophan.

We investigated the photo-protective effect of sugar-based surfactants--hexyl glucoside and hexyl maltoside--against light-induced oxidation of a monoclonal antibody. Reactive oxygen species are generated in solutions in the presence of light; these reactive species readily oxidize amino acids such as tryptophan. Hexyl glucosides and hexyl maltosides scavenge these reactive species and protect tryptophan residues from light-induced oxidation in a concentration-dependent manner. As a result of the scavenging process, hydrogen peroxide is formed, especially at high (millimolar) concentrations of the alkyl glycoside surfactants. These results suggest that hexyl glucoside and hexyl maltoside have the potential to protect tryptophan residues against light-induced oxidation.

Thermodynamic and structural characterization of an antibody gel.

Although extensively studied, protein-protein interactions remain highly elusive and are of increasing interest in drug development. We show the assembly of a monoclonal antibody, using multivalent carboxylate ions, into highly-ordered structures. While the presence and function of similar structures in vivo are not known, the results may present a possible unexplored area of antibody structure-function relationships. Using a variety of tools (e.g., mechanical rheology, electron microscopy, isothermal calorimetry, Fourier transform infrared spectroscopy), we characterized the physical, biochemical, and thermodynamic properties of these structures and found that citrate may interact directly with the amino acid residue histidine, after which the individual protein units assemble into a filamentous network gel exhibiting high elasticity and interfilament interactions. Citrate interacts exothermically with the monoclonal antibody with an association constant that is highly dependent on solution pH and temperature. Secondary structure analysis also reveals involvement of hydrophobic and aromatic residues.

Characterization of a nutrient feed precipitate from an E. coli fermentation process.

Metalloproteins require soluble metal ions such as zinc to properly fold into their native and active state to maintain stability and biological activity. When protein products are produced during microbial fermentations, metals are made available to the metalloproteins via nutrient supplements. During the production at the manufacturing-scale of a recombinant product that required zinc as a cofactor, an insoluble precipitate formed in the preparation tank after steam sterilization of the nutrient feed containing methionine, glycerophosphate, and zinc sulfate (MGZ). The precipitated nutrient feed was believed to be the cause for not enough zinc delivered to the production fermentor, leading to poor product assembly and stabilization. This article explores several analytical techniques such as capillary zone electrophoresis, inductively coupled plasma and phosphate molybdate assays to identify and quantify the composition of the precipitate. Our results show that the glycerophosphate component of the combined MGZ nutrient feed contains inorganic phosphate, which precipitates zinc from the feed media.

Dynamics of the bacterial intermediate filament crescentin in vitro and in vivo.

BACKGROUND: Crescentin, the recently discovered bacterial intermediate filament protein, organizes into an extended filamentous structure that spans the length of the bacterium Caulobacter crescentus and plays a critical role in defining its curvature. The mechanism by which crescentin mediates cell curvature and whether crescentin filamentous structures are dynamic and/or polar are not fully understood. METHODOLOGY/PRINCIPAL FINDINGS: Using light microscopy, electron microscopy and quantitative rheology, we investigated the mechanics and dynamics of crescentin structures. Live-cell microscopy reveals that crescentin forms structures in vivo that undergo slow remodeling. The exchange of subunits between these structures and a pool of unassembled subunits is slow during the life cycle of the cell however; in vitro assembly and gelation of C. crescentus crescentin structures are rapid. Moreover, crescentin forms filamentous structures that are elastic, solid-like, and, like other intermediate filaments, can recover a significant portion of their network elasticity after shear. The assembly efficiency of crescentin is largely unaffected by monovalent cations (K(+), Na(+)), but is enhanced by divalent cations (Mg(2+), Ca(2+)), suggesting that the assembly kinetics and micromechanics of crescentin depend on the valence of the ions present in solution. CONCLUSIONS/SIGNIFICANCE: These results indicate that crescentin forms filamentous structures that are elastic, labile, and stiff, and that their low dissociation rate from established structures controls the slow remodeling of crescentin in C. crescentus.

Polysorbate 20 prevents the precipitation of a monoclonal antibody during shear.

Monoclonal antibodies (MAbs) are widely used as therapeutic proteins and they are frequently exposed to a high degree of stress during manufacturing or delivery. MAbs shear thin upon increasing shear rates. After undergoing multiple shear cycles, with a cone-and-plate rheometer, the solution viscosity of high concentration antibodies increases due to the formation of insoluble aggregates. These shear-induced insoluble aggregates do not form when polysorbate 20 is present in solution. We hypothesize that monoclonal antibodies form a thin protein layer at the air-water interface. MAbs at the interface expose their hydrophobic core to air leading to unfolding, multiple non-specific intermolecular interactions and, upon continuous high shear, precipitation. Surface tension analysis confirms that monoclonal antibodies are surface active and that polysorbate 20 can prevent their interaction with the air-water interface. In addition, we complement these findings with a viscometer that measures bulk viscosity without the influence of an air-liquid interfacial viscosity and find that the bulk viscosity increases slightly when Mab solutions contained polysorbate 20. These methods of analysis could be used when designing manufacturing systems in which a protein solution is subject to shear forces.

Alpha-actinin and filamin cooperatively enhance the stiffness of actin filament networks.

BACKGROUND: The close subcellular proximity of different actin filament crosslinking proteins suggests that these proteins may cooperate to organize F-actin structures to drive complex cellular functions during cell adhesion, motility and division. Here we hypothesize that alpha-actinin and filamin, two major F-actin crosslinking proteins that are both present in the lamella of adherent cells, display synergistic mechanical functions. METHODOLOGY/PRINCIPAL FINDINGS: Using quantitative rheology, we find that combining alpha-actinin and filamin is much more effective at producing elastic, solid-like actin filament networks than alpha-actinin and filamin separately. Moreover, F-actin networks assembled in the presence of alpha-actinin and filamin strain-harden more readily than networks in the presence of either alpha-actinin or filamin. SIGNIFICANCE: These results suggest that cells combine auxiliary proteins with similar ability to crosslink filaments to generate stiff cytoskeletal structures, which are required for the production of internal propulsive forces for cell migration, and that these proteins do not have redundant mechanical functions.

Carboxylate-dependent gelation of a monoclonal antibody.

PURPOSE: This paper shows the first ever assembly of monoclonal antibody using multivalent carboxylate ions into highly ordered structures that feature viscoelastic properties reminiscent of other filamentous proteins. METHODS: A monoclonal antibody was assembled into filamentous networks by adding multivalent carboxylates to the protein solution. Gelation and characterization of these networks were monitored using mechanical rheometry, electron microscopy, Fourier transform infra-red and Raman spectroscopy. RESULTS: Electron microscopy and mechanical rheometry suggest the formation of rigid filament bundles that feature strong interfilament interactions. Filament network elasticity increased with multivalent carboxylate and protein concentrations, hinting at the importance of multivalent carboxylates in the mechanism of assembly. CONCLUSION: Assembly is not triggered by high ionic strength but with multivalent carboxylates. A high protein concentration is required for filament formation and the elasticity of the networks are weakly dependent on concentration. The exact mechanism of assembly is still elusive, although we speculate that carboxylates could act as a bridge to crosslink antibody monomers. These monoclonal antibody monomers could be linked either through Fab-Fab or Fc-Fab regions, although previous reports have shown evidence of reversible self-association mediated through the Fab regions.

The filamentous actin cross-linking/bundling activity of mammalian formins.

Formins are multidomain proteins that regulate actin filament dynamics and are defined by the formin homology 2 domain. Biochemical assays suggest that mammalian formins display actin-filament nucleation, severing, and bundling activities. Whether formins can cross-link actin filaments into viscoelastic arrays and the effectiveness of formins' bundling activity compared with that of important filamentous actin (F-actin) cross-linking/bundling proteins are unknown. Here, we used rigorous in vitro rheologic assays to deconvolve the dynamic cross-linking activity from the bundling activity of formin FRL1 and the closely related mDia1 and mDia2. In addition, we compared these formins with the canonical F-actin bundling protein fascin and cross-linking/bundling proteins alpha-actinin and filamin. We found that FRL1 and mDia2, but not mDia1, can help F-actin form highly elastic networks. FRL1 and mDia2 mediate the formation of highly elastic F-actin networks as effectively and rapidly as alpha-actinin and filamin but only past a relatively high actin-to-formin molar ratio of 50:1. Past that threshold molar ratio, the mechanical properties of F-actin/formin networks are independent of formin concentration, similar to fascin. Moreover, unlike those for alpha-actinin and filamin but similar to those for fascin, F-actin/formin networks show no strain-induced hardening. mDia1 cannot bundle F-actin but can weakly cross-link filaments at high concentrations. Point mutagenesis reveals that reducing the barbed-end binding activity of FRL1 and mDia2 greatly enhances the rate of formation of F-actin gels but does not significantly affect the mechanical properties of the resulting networks at steady state. Together, these results suggest that the mechanical behaviors of FRL1 and mDia2 are fundamentally different from those of cross-linking/bundling proteins alpha-actinin and filamin but qualitatively similar to the mechanical behavior of the bundling protein fascin, albeit with a dramatically increased (>10-fold) threshold concentration for transition to bundling, which nevertheless leads to much stiffer F-actin networks than fascin.

A direct interaction between actin and vimentin filaments mediated by the tail domain of vimentin.

The assembly and organization of the three major eukaryotic cytoskeleton proteins, actin, microtubules, and intermediate filaments, are highly interdependent. Through evolution, cells have developed specialized multifunctional proteins that mediate the cross-linking of these cytoskeleton filament networks. Here we test the hypothesis that two of these filamentous proteins, F-actin and vimentin filament, can interact directly, i.e. in the absence of auxiliary proteins. Through quantitative rheological studies, we find that a mixture of vimentin/actin filament network features a significantly higher stiffness than that of networks containing only actin filaments or only vimentin filaments. Maximum inter-filament interaction occurs at a vimentin/actin molar ratio of 3 to 1. Mixed networks of actin and tailless vimentin filaments show low mechanical stiffness and much weaker inter-filament interactions. Together with the fact that cells featuring prominent vimentin and actin networks are much stiffer than their counterparts lacking an organized actin or vimentin network, these results suggest that actin and vimentin filaments can interact directly through the tail domain of vimentin and that these inter-filament interactions may contribute to the overall mechanical integrity of cells and mediate cytoskeletal cross-talk.

GTPase activity, structure, and mechanical properties of filaments assembled from bacterial cytoskeleton protein MreB.

MreB, a major component of the recently discovered bacterial cytoskeleton, displays a structure homologous to its eukaryotic counterpart actin. Here, we study the assembly and mechanical properties of Thermotoga maritima MreB in the presence of different nucleotides in vitro. We found that GTP, not ADP or GDP, can mediate MreB assembly into filamentous structures as effectively as ATP. Upon MreB assembly, both GTP and ATP release the gamma phosphate at similar rates. Therefore, MreB is an equally effective ATPase and GTPase. Electron microscopy and quantitative rheology suggest that the morphologies and micromechanical properties of filamentous ATP-MreB and GTP-MreB are similar. In contrast, mammalian actin assembly is favored in the presence of ATP over GTP. These results indicate that, despite high structural homology of their monomers, T. maritima MreB and actin filaments display different assembly, morphology, micromechanics, and nucleotide-binding specificity. Furthermore, the biophysical properties of T. maritima MreB filaments, including high rigidity and propensity to form bundles, suggest a mechanism by which MreB helical structure may be involved in imposing a cylindrical architecture on rod-shaped bacterial cells.

Mechanical shear can accelerate the gelation of actin filament networks.

Rearrangements of the filamentous actin cytoskeleton at the leading edge of motile cells occur under large mechanical stresses. Contrary to conventional wisdom, we show that mechanical deformations applied during gelation can accelerate the rate of gelation and produce F-actin networks that are stiffer and mechanically more resilient than those polymerized under low or high shear deformations. Above a threshold shear strain amplitude, F-actin networks collapse and become soft and liquidlike. This effect of shear-induced strengthening of polymerizing networks depends on the state of hydrolysis of the actin-bound adenosine triphosphate.

The rapid onset of elasticity during the assembly of the bacterial cell-division protein FtsZ.

FtsZ, a prokaryotic homolog of eukaryotic tubulin, is a major constituent of the bacterial Z-ring, which contracts the cell wall during cell division. Because the mechanical properties of FtsZ are unknown, its function in the maintenance and constriction of the Z-ring is not well understood. Here, quantitative rheometry shows that, at physiological concentrations, FtsZ filaments form, extremely rapidly, highly elastic networks within physiological time scales ( approximately minutes), much faster than other major dynamic cytoskeletal filaments, including microtubule, actin, and vimentin in eukaryotes. FtsZ networks display a relatively low viscosity and a high resilience against shear stresses, as well as an elasticity that depends weakly on concentration, G approximately C(0.57), a power-law dependence consistent with crosslinked flexible filaments. Calcium, whose intracellular concentration increases during bacterial division, further enhances the elasticity of FtsZ networks through filament bundling, an effect that occurs in the presence of GTP, not GDP. These studies suggest that FtsZ filaments have the toughness to provide strong mechanical support for the maintenance and circumferential constriction of the bacterial Z-ring.

The assembly of MreB, a prokaryotic homolog of actin.

MreB, a major component of the bacterial cytoskeleton, exhibits high structural homology to its eukaryotic counterpart actin. Live cell microscopy studies suggest that MreB molecules organize into large filamentous spirals that support the cell membrane and play a key shape-determining function. However, the basic properties of MreB filament assembly remain unknown. Here, we studied the assembly of Thermotoga maritima MreB triggered by ATP in vitro and compared it to the well-studied assembly of actin. These studies show that MreB filament ultrastructure and polymerization depend crucially on temperature as well as the ions present on solution. At the optimal growth temperature of T. maritima, MreB assembly proceeded much faster than that of actin, without nucleation (or nucleation is highly favorable and fast) and with little or no contribution from filament end-to-end annealing. MreB exhibited rates of ATP hydrolysis and phosphate release similar to that of F-actin, however, with a critical concentration of approximately 3 nm, which is approximately 100-fold lower than that of actin. Furthermore, MreB assembled into filamentous bundles that have the ability to spontaneously form ring-like structures without auxiliary proteins. These findings suggest that despite high structural homology, MreB and actin display significantly different assembly properties.

The bimodal role of filamin in controlling the architecture and mechanics of F-actin networks.

Reconstituted actin filament networks have been used extensively to understand the mechanics of the actin cortex and decipher the role of actin cross-linking proteins in the maintenance and deformation of cell shape. However, studies of the mechanical role of the F-actin cross-linking protein filamin have led to seemingly contradictory conclusions, in part due to the use of ill-defined mechanical assays. Using quantitative rheological methods that avoid the pitfalls of previous studies, we systematically tested the complex mechanical response of reconstituted actin filament networks containing a wide range of filamin concentrations and compared the mechanical function of filamin with that of the cross-linking/bundling proteins alpha-actinin and fascin. At steady state and within a well defined linear regime of small non-destructive deformations, F-actin solutions behave as highly dynamic networks (actin polymers are still sufficiently mobile to relax the stress) below the cross-linking-to-bundling threshold filamin concentration, and they behave as covalently cross-linked gels above that threshold. Under large deformations, F-actin networks soften at low filamin concentrations and strain-harden at high filamin concentrations. Filamin cross-links F-actin into networks that are more resilient, stiffer, more solid-like, and less dynamic than alpha-actinin and fascin. These results resolve the controversy by showing that F-actin/filamin networks can adopt diametrically opposed rheological behaviors depending on the concentration in cross-linking proteins.